Xitanium LED driver Datasheet Xitanium LED drivers spot- and downlight SELV Enabling future-proof LED technology Our Xitanium prograable window LED drivers ensure OEMs have complete flexibility and control in producing high quality luminaires. Available in application dedicated form factors, our LED point drivers provide further customization via wide operating windows. Additionally, almost all drivers feature the following specifications: SELV, improved ripple current, temperature derating, hot wiring, providing OEMs the tools to produce, and even alter later if necessary, premium downlights and spotlights. enefits Features Application High reliability underpinned by 5 year Operating windows - output current can be adjusted Retail via the Philips MultiOne configurator ('TD' drivers) or Office warranty Future-proof flexibility - with a resistor outside the driver or SimpleSet application-oriented operating Power ratings: 10-75W windows enable LED generation and hoice of housing designs -linear housing for tracks in complexity management ompatibility - can also be used for other manufacturers' modules or OEMs' own P designs '3 in 1' in design, conventional HID housings for down and Spotlighting and WH housing for independent use with strain relief and loop through
Electrical input data Rated input voltage range 220...240 Vac Rated input voltage 230 Vac Rated input frequency range 50...60 Hz Rated input current 0.19 A Rated input power 44 W Power factor 0.9 Total harmonic distortion 20 Efficiency 89 Rated input voltage D range 186...250 Vdc Rated input current D range 0.22 Adc Input voltage A range 202...254 Vac Operational range Input frequency A range 47.5...63 Hz Operational range Input voltage D range 168...250 Vdc Operational range Isolation input to output SELV Electrical output data Regulation method onstant urrent Output voltage 24...54 Vdc Output voltage max. 60 V Peak voltage at open load Output current 0.3...1.05 A Full output current setting Output current tolerance ±5 Output current ripple LF 4 Ripple = peak / average Output power 11...36 W Full output Electrical data controls input ontrol method Galvanic Isolation NA Logistical data Product name Order code Logistic code 12N 9290 014 16606 EAN3 Pieces per box 2/7 20
Wiring & onnections Input wire cross-section 0.2...1.5 2 16...24 AWG Input wire strip length 8.5...9.5 Output wire cross-section 0.2...1.5 2 16...24 AWG Output wire strip length 8.5...9.5 Maximum cable length 600 Total length of wiring including LED module, one way Dimensions and weight Length (A1) 108.3 Width (1) 74.2 Width (2) 63.6 Height (1) 31.8 Fixing hole diameter (D1) 4.1 Fixing hole distance (A2) 97.9 Weight 204 gram 3/7
Operational temperatures and humidity Ambient temperature -20...+55 Higher ambient temperature allowed as long as Tcase-max is not Tcase-max 80 Maximum temperature measured at Tcase-point Tcase-life 80 Measured at Tcase-point Maximum housing temperature 110 In case of a failure Relative humidity 10...90 n-condensing Ambient temperature -25...+85 Relative humidity 5...95 n-condensing Driver lifetime 50,000 hours Measured temperature at Tcase-point is Tcase-life. exceeded. Storage temperature and humidity Lifetime Maximum failures = 10 Prograable features Remark Set output current (AO) LEDset, SimpleSet See Design-in guide. Default output current: 300 ma onstant Lumen Over Lifetime (LO) D emergency diing (DemDIM) orridor mode Energy metering Diagnostics 4/7
Features Open load protection Remark Automatic recovering Short circuit protection Automatic recovering Over power protection Automatic recovering Hot wiring Suitable for fixtures with protection class I and II per IE60598 ertificates and standards Approval marks E / ENE Ingress Protection classification 20 Inrush current Inrush current Ipeak 16 A Input voltage 230V Inrush current Twidth 216 µs Input voltage 230V, measured at 50 Ipeak Drivers / M 16A type 36 pcs M Rating Relative number of LED drivers 10A 63 13A 81 16A 100 (stated in datasheet) 20A 125 25A 156 10A 104 13A 135 16A 170 20A 208 25A 260 Driver touch current Typical touch current < 0.7 ma peak Acc. IE61347-1. LED module contribution not included Mains surge iunity (diff. mode) 1 kv Acc. IE61000-4-5. 2 Ohm, 1.2/50us, 8/20us Mains surge iunity (co. mode) 2 kv Acc. IE61000-4-5. 12 Ohm, 1.2/50us, 8/20us Default setting Remark AO 300 ma Surge iunity Additional information 5/7
Graphs Operating window Power factor versus output power 6/7
Efficiency versus output power THD versus output power 2017 Philips Lighting Holding.V. All rights reserved. This document contains information relating to the Philips Lighting portfolio, intended for companies who may be interested in developing their product offering. te that the information provided is subject to change. Philips Lighting does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any coercial offer and does not form part of any quotation or contract. Date of release: February 20, 2017 www.philips.com/technology