Xitanium LED driver Datasheet Xitanium LED drivers spot- and downlight SELV Enabling future-proof LED technology Our Xitanium prograable window LED drivers ensure OEMs have complete flexibility and control in producing high quality luminaires. Available in application dedicated form factors, our LED point drivers provide further customization via wide operating windows. Additionally, almost all drivers feature the following specifications: SELV, improved ripple current, temperature derating, hot wiring, providing OEMs the tools to produce, and even alter later if necessary, premium downlights and spotlights. enefits Features Application High reliability underpinned by 5 year Operating windows - output current can be adjusted Retail via the Philips MultiOne configurator ('TD' drivers) or Office warranty Future-proof flexibility - with a resistor outside the driver or SimpleSet application-oriented operating Power ratings: 10-75W windows enable LED generation and hoice of housing designs -linear housing for tracks in complexity management ompatibility - can also be used for other manufacturers' modules or OEMs' own P designs '3 in 1' in design, conventional HID housings for down and Spotlighting and WH housing for independent use with strain relief and loop through
Electrical input data Rated input voltage range 220...240 Vac Rated input voltage 230 Vac Rated input frequency range 50...60 Hz Rated input current 0.37 A Rated input power 83 W Power factor 0.9 Total harmonic distortion 20 Efficiency 90 Rated input voltage D range 186...250 Vdc Rated input current D range 0.37 Adc Input voltage A range 202...254 Vac Operational range Input frequency A range 47.5...63 Hz Operational range Input voltage D range 168...275 Vdc Operational range Isolation input to output SELV Electrical output data Regulation method onstant urrent Output voltage 55...110 Vdc Output voltage max. 120 V Peak voltage at open load Output current 0.3...1 A Full output current setting Output current tolerance ±5 Output current ripple LF 20 Ripple = peak / average Output power 21...75 W Full output ontrol method Fixed Galvanic Isolation Electrical data controls input Logistical data Product name Order code 871829167625600 Logistic code 12N 9290 008 53803 EAN3 8718291676263 Pieces per box 6 2/7
Wiring & onnections Input wire cross-section 0.5...2.5 2 WAGO804, solid / stranded wire 12...20 AWG WAGO804, solid / stranded wire Input wire strip length 10...11 Output wire cross-section 0.08...0.33 2 JST, solid wire 22...28 AWG JST, solid wire 600 Total length of wiring including LED module, one way Maximum cable length Dimensions and weight Length (A1) 219 Width (1) 83 Height (1) 35 Fixing hole diameter (D1) 4.1 Fixing hole distance (A2) 206 Weight 340 gram 3/7
Operational temperatures and humidity Ambient temperature -20...+50 Higher ambient temperature allowed as long as Tcase-max is not Tcase-max 75 Maximum temperature measured at Tcase-point Tcase-life 65 Measured at Tcase-point Maximum housing temperature 110 In case of a failure Relative humidity 10...90 n-condensing Ambient temperature -25...+85 Relative humidity 5...95 n-condensing Driver lifetime 50,000 hours Measured temperature at Tcase-point is Tcase-life. exceeded. Storage temperature and humidity Lifetime Maximum failures = 10 Prograable features Remark Set output current (AO) Rset2 See Design-in guide. Default output current: = 700 ma LED module temperature derating (MTP) onstant Lumen Over Lifetime (LO) D emergency diing (DemDIM) orridor mode Energy metering Diagnostics Remark Features Open load protection Automatic recovering Short circuit protection Automatic recovering Over power protection Automatic recovering Hot wiring Suitable for fixtures with protection class I per IE60598 ertificates and standards Approval marks E / ENE Ingress Protection classification 20 4/7
Inrush current Inrush current Ipeak 32 A Input voltage 230V Inrush current Twidth 300 µs Input voltage 230V, measured at 50 Ipeak Drivers / M 16A type 12 pcs M Rating Relative number of LED drivers 10A 63 13A 81 16A 100 (stated in datasheet) 20A 125 25A 156 10A 104 13A 135 16A 170 20A 208 25A 260 Driver touch current Typical touch current < 0.7 ma peak Acc. IE61347-1. LED module contribution not included Mains surge iunity (diff. mode) 1 kv Acc. IE61000-4-5. 2 Ohm, 1.2/50us, 8/20us Mains surge iunity (co. mode) 2 kv Acc. IE61000-4-5. 12 Ohm, 1.2/50us, 8/20us Advised NT type Vishay 15kOhm±2NT 238161554153 Surge iunity Module Temperature Protection Murata NP15XW153E03R NP15XW153E03R With 390Ω in series NT resistance threshold 2966 Ω Start limiting output current orresponding temperature 70 With advised type 238161554153 NT resistance versus output current 5/7
Graphs Operating window Power factor versus output power 6/7
Efficiency versus output power 2017 Philips Lighting Holding.V. All rights reserved. This document contains information relating to the Philips Lighting portfolio, intended for companies who may be interested in developing their product offering. te that the information provided is subject to change. Philips Lighting does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any coercial offer and does not form part of any quotation or contract. Date of release: February 22, 2017 www.philips.com/technology