PCM--A PC/0+ SBC w/amd LX800, VGA, LCD, Dual LAN, USB.0, On-board Flash and Memory Startup Manual Packing List Specifications Before you begin installing your card, please make sure that the following items have been shipped: x PCM- SBC x AT Power cable (p/n:700009) x Audio cable (p/n:70000098) x Four COM cable (p/n:70008) X RS-/8 COM cable (p/n:70007) x Keyboard/Mouse cable (p/n:70000) x Y cable (for KB/MS extention) (p/n:700000) x Ethernet RJ- Conn. (p/n:700008) conversion cable x LPT port cable (p/n:70000) x IDE cable (p/n:7000) x VGA cable (p/n:700000898) x USB cable (p/n:7000) (bracket type with two USB ports) x Startup manual x CD-ROM (Manual, Driver, Utility) If any of these items are missing or damaged, please contact your distributor or sales representative immediately. Note : Note : For detailed contents of PCM--A, please refer to information on the enclosed CD-ROM (in PDF format). Acrobat Reader is required to view any PDF file.acrobat Reader can be downloaded at: www.adobe.com/products/acrobat/readstep. html (Acrobat is a trademark of Adobe) For more information on this and other Advantech products, please visit our website at: http://www.advantech.com http://www.advantech.com/eplatform For technical support and service, please visit our support website at: http://service.advantech.com.tw/suppot/ This manual is for the PCM- Series Rev. A Part No. 000 Print in China nd Edition, April 009 Standard SBC Functions CPU: AMD Geode LX800 processor, up to 00 MHz System Memory: On-board memory DDR SDRAM MB nd Cache Memory: 8 KB on the processor System Chipset: AMD Geode LX800 BIOS: Award Mbit Flash BIOS Watchdog Timer: levels timer interval Expansion Interface: PC/0+ Battery: Lithium V / 9 mah Power management: ACPI supported Enhanced IDE interface: One channel supports one EIDE device (another is used for on board IDE Flash). BIOS auto-detect, PIO Mode or Mode, supports UDMA mode Flash: onboard GB Flash (IDE interface) Serial ports: Four serial RS- ports in one pinheader 0 pin connector (CN0: COM///). RS- and RS- 8 in one pinheader and can be configured via CN9 connector Parallel port: One parallel port, supports SPP/EPP/ECP mode Keyboard/mouse connector: Supports one standard PC/AT keyboard and a PS/ mouse Audio: Supports AC97 Audio stereo sound USB: Four USB.0 compliant universal serial bus ports GPIO: 8 bit general purpose Input/Output VGA/LVDS Interface Memory Size: Optimized Shared Memory Architecture, supports up to MB frame buffer using system memory Resolution: CRT resolution: up to 00 x 00 x bpp at 00 Hz and up to 0 x 78 x bpp at 0 Hz for TFT LCD LCD interface: Supports up to -bit TFT LCD (TTLsignal) Dual Simultaneous Display: CRT+LCD Ethernet interface Chipset supports: x 0/00Mbps - Intel 8ER Ethernet interface: IEEE 80.u (00 BASE-T) protocol compatible Connector: Two internal box headers Audio Function Audio controller: Realtek ACL0 chipset, supports AC97 D Audio stereo sound Audio Interface: Microphone in, Line in, Line out PCM--A Startup Manual
Specifications Jumpers and Connectors Mechanical and Enviromental Dimensions (L x W): 9 x mm (.77 x.0 ) Mechanical Drawing (dxf file) is available. Power Supply Type: AT Power Requirement: + V ± %, + V ± % (Optional), ( V only, V optional for PC0 add on card and LCD inverter) Power Consumption: (Geode LX800, MB DDR) Max load: + V@. A, + V@ 0.0 A Idle mode: + V@.7 A, + V@ 0.0 A Conditions: Test software: Hot CPU pro. Power on - Boot: Measure the maximum current value of between system power on and boot-up to O.S. Max. load: Measure the maximum current value which system under maximum load (CPU: Top speed, RAM & Graphic: Full loading) Idle mode: Measure the current value when system in windows mode and without running any program Operating temperature: 0 ~ 0 C ( ~ 0 F) ( operation humidity: 0 C @ 8% RH Non-Condensing) Extended temperature support: -0 C - 80 C: PCM-FZ-L0AE -0 C - 8 C: PCM-FZ-L0AE Weight: 0.8 kg (reference weight of total package) The board has a number of jumpers that allow you to configure your system to suit your application. The table below lists the function of each of the jumpers an connectors. Jumpers/Switch Setting Label J J J J CN9 Connectors Label CN CN CN CN CN Function DOTREF Select Clear CMOS Flash Master/Slave Select PCI VI/O Power Selector COM Setting Function ATX Feature Power Connector (optional) TFT LCD I/F Inverter Power SMBus IDE CN USB/ / CN7 USB / CN8 CN9 CN0 CN CN CN7 CN0 CN CN CN CN CN8 KB/MS Print Port RS/8 ISA -V & -V Input LAN / CN LAN CRT COM/// AT Power / Reset / Buzzer Pin Header Battery Connector AUDIO-OUT / CN AUDIO-IN GPIO / CN7 GPIO Power Input PCM--A Startup Manual
Jumpers and Connectors Software Installation J: DOTREF Select (-) External NL Internal The CD disc contains a driver installer program that will guide you through the installation of various device drivers needed to take full advantage of your CPU card. Caution! The computer is provided with a battery-powered Real-time Clock circuit. There is a danger of explosion if the battery is incorrectly replaced. Replace only with same or equivalent type recommended by the manufacturer. Discard used batteries according to manufacturer s instructions. J: Clear CMOS (-) BAT (default) (-) Clear CMOS CN9: COM Setting (-) RS- (default) (-) RS-8 (-) RS- This device complies with the requirements in Part of the FCC rules. Operation is subject to the following two conditions:.. Declaration of Conformity This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. J: Flash Master/Slave Select (-) Slave (default) (-) Master J: PCI VI/O POWER (-) With + V (-) WIth +. V (default) PCM--A Startup Manual
Figure : PCM- location connectors & Jumpers (component side) CN7 CN Figure : PCM- location connectors (solder side) PCM--A Startup Manual
9.89 9. 9. 9. 90.8 87. 80.9. 8.9.9.8 0. 8. 7...08..8.0.70.0.7.7.08...9.0 9..0.89 7.7 77.9 8.09 87.77 90.7 9.8 9.8 0.87.70 7.99...0 8.89...00.7 8. 90.9 9.0 0. 90.7 9. 9.8 90.8 8.79 8. 77.7 7.8 87. 0.9...8.08..80 8. Figure: PCM- mechanical drawing (component side) 0.87 90.7 9.89 87. 87..9.9 8. 8. 97.9.70 90.7.0 Figure : PCM- Mechanical Drawing (solder side) PCM--A Startup Manual