PCM-9388 Celeron M 3.5 SBC with PC/104, VGA/ TTL/LVDS Ethernet/USB 2.0 and SSD Startup Manual Packing List Specifications Before installation, please make sure that you have received the following: 1. 2. 3. 4. 1 PCM-9388 SBC 1 Startup Manual 1 Utility CD 1 Mini jumper pack p/n: 9689000002 5. 1 Audio cable p/n: 1703100152 6. 1 IDE 44 pin connector p/n: 1701440504 7. 1 USB 2 port cable p/n: 1703100121 8. 1 Parallel port cable p/n: 1700260250 9. 1 Keyboard/Mouse cable p/n: 1700060202 10. 1 Second serial port cable p/n: 1701140201 If anything is missing or damaged, contact your distributor or sales representative immediately. Note1: For detailed contents or the PCM-9388, please refer to the enclosed CD Disc (in PDF format). Note2: Acrobat Reader is required to view any PDF file. Acrobat Reader can be downloaded at: http://www.adobe.com/products/acrobat/readerstep2.html (Acrobat is a trademark of Adobe). For more information on this and other Advantech products, please visit our website at: http://www.advantech.com http://www.advantech.com/eplatform For technical support and service, please visit our support website at: http://www.advantech.com/support/ This manual is for the PCM-9388 Series Rev. A2. Standard PC functions CPU: Embedded Intel ULV Celeron M 600 MHz (512 K L2 cache) Embedded Intel ULV Celeron M 1.0 GHz (0 K L2 cache ) System Memory: 1 x SODIMM socket, supports Double Data Rate (DDR) 128 MB to 1 GB, DDR 200/266 DRAM 2nd Cache Memory: Depends on CPU type from 0 to 512 KB System Chipset: Intel 852GM GMCH/ICH4 chipset BIOS: Award 4-Mbit Flash BIOS Watchdog Timer: 255 level timer interval Expansion Interface: PC/104 Battery: Lithium 3 V/210 mah Enhanced IDE interface: One channel supports up to two EIDE devices. BIOS auto-detect, PIO Mode 3 or Mode 4, supports UDMA 33 mode Serial ports: Two serial RS-232 ports, COM1: RS-232, COM2: RS-232/422/485 Parallel port: One parallel port, supports SPP/EPP/ECPmode, shared with FDD Keyboard/mouse connector: Supports one standard PC/AT keyboard and a PS/2 mouse Audio: Supports AC97 Audio stereo sound USB: Two USB 2.0 compliant universal serial bus ports IrDA: 115Kbps, SIR, IrDA 1.0 complaint (optional) GPIO: 8-bit general purpose Input/Output Solid State Disk Supports one 50-pin socket for CFC type I VGA/LVDS Interface Chipset: Intel 852GM GMCH Memory Size: Optimized Shared Memory Architecture, supports up to 64 MB frame buffer using system memory Resolution: CRT display Mode: pixel resolution up to 1600 x 1200 @85 Hz; up to 1920 x 1440 @ 60 Hz LVDS display mode: up to UXGA panel resolution with frequency range from 25 MHz to 112 MHz TTL LCD: supports 18-bit TTL LCD LVDS LCD: supports 2 channel (2 x18-bit) LVDS LCD Panel (2 x 24-bit optional) Dual Independent Display: CRT + LVDS CRT + TTL Part No. 2006938803 Printed in China 4th Edition, April 2009
Specifications (cont.) Ethernet Interface Chipset supports: 10/100 Mbps - Realtek RTL8100CL (With Wake on LAN) Ethernet interface: IEEE 802.3u (100 BASE-T) protocol compatible Built-in boot ROM Temperature: 0 ~ 40 C (32 ~ 104 F) Audio Chipset: Intel(r) 82801DB I/O Controller Hub 4 (ICH4) and ALC203 codec Audio controller: Supports AC97 3D Audio stereo sound Audio interface: line in, line out, Microphone in Mechanical Environment Dimensions: 145 x 102 mm (5.9 x 4.2 ) Mechanical Drawing (dxf file) is available. Power Supply Type: AT/ATX Power Requirement: +5 V ±5%, +12 V ±5% (Optional), 5 V standby for ATX mode, or supports single +5 V only Power Consumption: ULV Celeron M 600 MHz@ 256 MB DDR 266 Max (HCT): +5 V@ 2.21 A, +12 V@ 0.17 A Operating Temperature: 0 ~ 60 C (32 ~ 140 F) Weight: 0.85 kg (reference weight of total package) Jumpers and Connectors The board has a number of jumpers that allow you to configure your system to suit your application. The table below lists the function of each of the jumpers and connectors. Jumpers Label J1 AT/ATX selector Connectors Label CN1 CN2 CN3 CN4 CN5 CN6 CN7 CN8 CN9 CN10 CN11 CN12 CN13 CN14 CN15 CN16 CN17 CN19 CN20 CN21 CN22* CN23 CN24* AT power connector ATX POWER Standby Connector SMBus FAN Connector (SPEED Detect) ATX Power Button Connector GPIO AUDIO Connector IDE Connector CompactFlash HDD & PWR LED VGA COM1 LPT Connector IR Connector COM2 RS-232/RS-422/RS-485 Connector USB Connector PS2 (KB & MS) LAN Connector PC/104 SOLDER Connector Negative POWER Input LVDS LCD 40-Pin HIROSE Invert Power Connector TTL LCD 40-Pin HIROSE *Note: Please do not put more than 15 kg pressure on top of the LVDS connector during the LVDS cable assembly with PCM-9388. J2 J3/J5/J4 J6 Audio power selector COM2 LCD power selector J1 AT/ATX selector PIN HEADER 2*1P 180D (M) SQUARE 2.0 mm DIP W/O Pb (1-2) AT Power none ATX Power 1 2 1 2
J2 Audio Power Source PIN HEADER 3*1P 180D (M) SQUARE 2.0 mm 1-2 (*) Audio Power from 12 V-input & 5 V- output LDO 2-3 Audio Power from 5 V *: Default J3/J4/J5 J3(1-2) J4(1-2) J5(1-2) COM2 (RS-232 Default) PIN HEADER 2*1P 180D (M) SQUARE 2.0 mm RS-422 RS-485 RS-232 J6 Pin LCD Power Signal 1-2 +5 V 2-3 (*) +3.3 V *: Default 3
Figure 1: PCM-9388 Layout (Component Side) Figure 2: PCM-9388 Layout (Solder Side)
Figure 3: PCM-9388 Mechanical Drawing (Component Side) Figure 4: PCM-9388 Mechanical Drawing (Solder Side)