Software for Digital Barometer Model SK-500B Installation manual SK-500B for Windows Ver. 1.1E Precautions - Make sure that you have logged on as Administrator. If not, restart your computer and log on as Administrator. If your computer is managed by a network administrator, consult with him/her before making any modification to the system. - Turn off your anti-virus program or any other programs currently running on your system. Minimum System Requirements OS : Windows XP(SP3) Windows 7, 8, 8.1, 10(32-bit/64-bit) CPU :Capable of properly running one of the above OSs Memory :Capable of properly running one of the above OSs Recommendation Windows XP: 512MB or more Windows 7, 8, 8.1, 10: 2GB or more Hard disk drive:500mb or more free space Others :USB interface Internet environment Windows, Windows 7, Windows 8, Windows 8.1 and Windows 10 are registered trademark of Microsoft Corporation in the USA and the other countries. NI-VISA is trademark of National Instrument Corporation Installing Software The screenshots used in this installation manual are of Windows 10. 1. Start up the computer on which the software is to be installed. 2. Download "500B11E.zip" from our website and save it on your desktop. 3. Unzip the saved file to the desktop. When unzipping, either "Extract" or "Expand" is displayed depending on the computer being used. Zipped file Right-click to select "Extract All ". Extracted folder Note: Be sure to extract (expand) the saved file. If you try to install without extracting the file, an error message appears and the installation fails. 1 / 6 Q.02
4. Double-click to execute "500B11E_setup.exe" in the extracted folder. The extension of ".exe" may not be displayed depending on the computer settings. 5. Preparing for installation (Windows 7) A message about "User Account Control" appears. Click "Yes". The message may not be displayed depending on the computer settings. 6. The start installation screen of "SK-500B for Windows" appears. Specify the destination location of the file, and then click "Next". 2 / 6 Q.02
For Windows 8 or later, the message below may appear. Click "Next" to proceed. 7. Read the "License Agreement", select "I accept the License Agreement" and then click "Next". 3 / 6 Q.02
The program "SK-500B for Windows" uses "NI-VISA TM " of National Instruments. To use "SK-500B for Windows", it is necessary to agree to the above license terms of National Instruments and IVI Foundation. If "NI-VISA TM" has already been installed, it will not be overwritten. Also, the above license terms of National Instruments and IVI Foundation will not appear. 8. Now, the system is ready for installation. Confirm the settings, and then click "Next". 4 / 6 Q.02
The installation starts. 9. Upon completion, a message indicating installation is complete appears. Click "Next". 10. Click "Restart". 5 / 6 Q.02
Installation of "SK-500B for Windows" is complete. The screen requesting restarting will not appear if "NI-VISA TM" is not installed; in this case, you do not have to restart your computer. 11. Starting up "SK-500B for Windows" Upon completion of installation, the shortcuts to "SK-500B for Windows" are created on the start menu and desktop. Click the shortcut icon to start up "SK-500B for Windows". Shortcut on the start menu Shortcut icon on the desktop For how to use "SK-500B for Windows", refer to its help file. 6 / 6 Q.02