USB 3.0 Series Coming Soon SEN TECH This year Sentech will be introducing the brand new USB 3.0 interface technology to our clients in the form of the USB 3.0 CMOS series. The CMOS USB 3.0 series will be available in 5 to 0.3 MP resolutions with 14 to 123 fps and both color and monochrome models. These low cost, high performance cameras will be compatible with all standard industry drivers, and the Sentech Viewing Software and SDK. Look for the CMOS USB 3.0 series to be available in mid-2012. New Features of USB 3.0 New! Key Features USB 3.0 Models STC-MBA5MUSB3 STC-MCA5MUSB3 5MP Q Resoluion 1/2.5 CMOS Sensor Frame Rates (14 ~123 fps) or Monochrome Models Full Triggering Functions Sentech Viewing Software and SDK All Standard Industry Drivers Low Cost The new USB 3.0 interface introduces many new features and updates to the already amazing USB 2.0 interface. Allows simultaneous reading/writing 10x times faster than 2.0 Less power consumption 900mA for 3.0 / 500mA for 2.0 Backwards Compatible with USB 2.0 Applications Microscopy Metallurgy Industrial Biometrics Biophotonics Astronomy 16 17
USB 2.0 Series SEN TECH Standard Cased (Software Trigger) Hardware & Software Trigger USB 2.0 Overview Models Sensor Resolution Frame Rate Standard Board 18 (Software Trigger) Key Features New! Ultra-Small ~ U Resolution or Monochrome Low Light Extended Integration Variable Partial Scan and Clock Speed Control Horizontal & Vertical Flip Drawing & Annotation Standard USB or Lock Type Connectors DirectX, Twain, Linux, Halcon & NI LabVIEW TM Drivers Sentech Viewing Software and SDK Cased and Board STC-TB\TC33USB STC-TB\TC83USB STC-TB\TC133USB STC-TB\TC152USB 1/3 STC-TB\TC202USB Ultra-Small Cased STC-MB\MC33USB STC-MB\MC83USB STC-MB\MC133USB STC-MB\MC152USB STC-MB\MC202USB Accessories Cables CAB-USB 1.8 CAB-USB-1.8MB * CAB-USB-2L CAB-USB-2LMB * CAB-USB-3 CAB-USB-3L CAB-USB-3LMB * CAB-USB-3MB * CAB-USB-5L Lenses Various C-Mount Lenses Various CS-Mount Lenses Various Telecentric Lenses 1/2 1/1.8 0.3 MP Lens Mount C-Adapter Tripod Mount TP-HCA * * accessories for ultra-small models 0.8 MP 1.2 MP 1.4 MP 2 MP 15fps 19fps 22fps 30fps 60fps 19
USB 2.0 Series Cased Ultra-Small The Ultra-Small USB series is the next generation of Sentech s USB 2.0 lineup. This new generation of USB cameras Ultra-Small Models are only 1.1 x 1.1 x 1.7. Despite the small size, these models utilize the same industry leading Sentech image software, drivers and SDK as their predecessors. In addition to this, these new cameras feature 8, 10 and 12 bit output, as well as full machine vision triggering functionality. Software include: Sentech Viewing Software Standard & Trigger SDKs Drivers include: DirectX Twain Linux Halcon NI LabVIEW TM New! Ultra-Small Models 2 MEGAPIXEL U STC-MB202USB STC-MC202USB STC-MB152USB STC-MC152USB 28 mm 37 STC-MB133USB STC-MC133USB 28 STC-MB83USB STC-MC83USB 20 STC-MB33USB STC-MC33USB 21
Specifications USB 2.0 Ultra-Small Models Monochrome STC-MB33USB STC-MC33USB STC-MB83USB STC-MC83USB STC-MB133USB STC-MC133USB STC-MB152USB STC-MC152USB STC-MB202USB STC-MC202USB Resolution: Full (0.3 Megapixel) 640 (H) x 480 (V) 640 (H) x 224 (V) 640 (H) x 80 (V) (0.8 Megapixel) 1024 (H) x 768 (V) 1024 (H) x 344 (V) 1024 (H) x 136 (V) (1.2 Megapixel) 1280 (H) x 960 (V) 1280 (H) x 440 (V) 1280 (H) x 168 (V) (1.4 Megapixel) 1360 (H) x 1024 (V) 1360 (H) x 476 (V) 1360 (H) x 184 (V) U (2 Megapixel) 1600 (H) x 1200 (V) 1600 (H) x 544 (V) 1600 (H) x 208 (V) Imager Sensor: 1/3 CCD (ICX424AL) 1/3 CCD (ICX424AQ) 1/3 CCD (ICX204AL) 1/3 CCD (ICX204AK) 1/3 CCD (ICX445AL) 1/3 CCD (ICX445AQ) 1/2 CCD (ICX205AL) 1/2 CCD (ICX205AK) 1/1.8 CCD (ICX274AL) 1/1.8 CCD (ICX274AQ) Signal Format: Progressive: Monochrome or (Bayer RGB Filter) Progressive: Monochrome or (Bayer RGB Filter) Maximum Frame Rates: Full Scan 240 fps 22 fps 44 fps 89 fps 19 fps 38 fps 77 fps 15 fps 61 fps Pixel Clock Frequencies: 24.5 MHz 29.5 MHz 36.8 MHz Trigger Mode: Hardware & Software Trigger (Free-run / Edge preset / Pulse Width / Start & Stop) Hardware & Software Trigger (Free-run / Edge preset / Pulse Width / Start & Stop) Scanning Methods: Full Progressive, Partial (1/1, 1/2, 1/4), Variable, Binning ( models) Full Progressive, Partial (1/1, 1/2, 1/4), Variable, Binning ( models) Sync System: Internal Sync Internal Sync Shutter Speed: Auto / Manual Auto / Manual Minimum Illumination: 0.08 Lux @ F1.2, 50 IRE 2.24 Lux @ F1.2, 50 IRE 0.5 Lux @ F1.2, 50 IRE 1.5 Lux @ F1.2, 50 IRE 0.18 Lux @ F1.2, 50 IRE 3.23 Lux @ F1.2, 50 IRE 0.07 Lux @ F1.2, 50 IRE 3.22 Lux @ F1.2, 50 IRE 0.11 Lux @ F1.2, 50 IRE 1.39 Lux @ F1.2, 50 IRE Gain: Auto / Manual Auto / Manual Gamma: Manual (Set via Software) Manual (Set via Software) Lens Mount: CS mount CS mount C mount White Balance: Camera: Auto / Manual / One-Shot (Set via Software) Camera: Auto / Manual / One-Shot (Set via Software) Video Output: 8bit / 10bit / 12bit 8bit / 10bit / 12bit Connectors: USB: mini-b USB connector IO signal: 6pin connector (HR10A-7R-6PB or equivalent) USB: mini-b USB connector IO signal: 6pin connector (HR10A-7R-6PB or equivalent) Shock and Vibration: Vibration: 10G (20 to 200Hz), Shock: 70G (3 directions, 3 times each) Vibration: 10G (20 to 200Hz), Shock: 70G (3 directions, 3 times each) Input Voltage: +5Vdc via USB Connector +5Vdc via USB Connector Power Consumption: 2.1W, < 420mA 2.1W, < 420mA Operating Temperature: 0 ~ 40 C (32 ~ 104 F) 0 ~ 40 C (32 ~ 104 F) Storage Temperature: -30 ~ 65 C (-22 ~ 149 F) -30 ~ 65 C (-22 ~ 149 F) Dimensions: Cased: 28 (W) x 28 (H) x 37 (D) mm (1.1 x 1.1 x 1.45 ) Cased: 28 (W) x 28 (H) x 37 (D) mm (1.1 x 1.1 x 1.45 ) Weight: Approximately 45g (1.59oz) Approximately 45g (1.59oz) 23
USB 2.0 Series Signal over USB Connector Sentech s ASH and AH USB 2.0 series are designed for machine vision and extremely low light applications. The ASH and AH models feature software and hardware control image capture. These cameras feature machine vision Trigger Models Signal over USB or 12 pin Hirose Connector triggering and complete control of the trigger process. These cameras have both pulse width and edge preset triggers that can be supplied to the camera via external hardware or a computer. The extended integration features of this camera make it ideal for low light applications. The ASH models has the USB signal on both the USB connector and 12 pin Hirose connector; whereas, the AH models output the USB signal over a USB connector. AH Models USB signal over the mini USB 2.0 connector ASH Models USB signal over the mini USB and 12 pin Hirose connector 50 mm Rear Panel 50 U 2 MEGAPIXEL STC-TB202USB-AH STC-TC202USB-AH STC-TB152USB-AH STC-TC152USB-AH STC-TB133USB-AH STC-TC133USB-AH STC-TB83USB-AH STC-TC83USB-AH STC-TB33USB-AH STC-TC33USB-AH 2 MEGAPIXEL U STC-TB202USB-ASH STC-TC202USB-ASH STC-TB152USB-ASH STC-TC152USB-ASH STC-TB133USB-ASH STC-TC133USB-ASH STC-TB83USB-ASH STC-TC83USB-ASH STC-TB33USB-ASH STC-TC33USB-ASH 36 mm CS Mount 41 C Mount 24 25
Specifications USB 2.0 Trigger Models Monochrome Resolution: Full Imager Sensor: STC-TB33USB-AH or ASH STC-TC33USB-AH or ASH (0.3 Megapixel) 640 (H) x 480 (V) 640 (H) x 224 (V) 640 (H) x 80 (V) 1/3 CCD (ICX424AL) 1/3 CCD (ICX424AQ) STC-TB83USB-AH or ASH STC-TC83USB-AH or ASH (0.8 Megapixel) 1024 (H) x 768 (V) 1024 (H) x 344 (V) 1024 (H) x 136 (V) 1/3 CCD (ICX204AL) 1/3 CCD (ICX204AK) STC-TB133USB-AH or ASH STC-TC133USB-AH or ASH (1.2 Megapixel) 1280 (H) x 960 (V) 1280 (H) x 440 (V) 1280 (H) x 168 (V) 1/3 CCD (ICX445AL) 1/3 CCD (ICX445AQ) STC-TB152USB-AH or ASH STC-TC152USB-AH or ASH (1.4 Megapixel) 1360 (H) x 1024 (V) 1360 (H) x 472 (V) 1360 (H) x 176 (V) 1/2 CCD (ICX205AL) 1/2 CCD (ICX205AK) Signal Format: Progressive: Monochrome or Progressive: Monochrome or Maximum Frame Rates: Full Scan 240 fps Pixel Clock Frequencies: 24.5 MHz 29.5 MHz 36.8 MHz Trigger Mode: Hardware & Software Trigger (Free-run / Edge preset / Pulse Width / Start & Stop) 22 fps 44 fps 89 fps 19 fps 38 fps 77 fps Hardware & Software Trigger (Free-run / Edge preset / Pulse Width / Start & Stop) Trigger Controls: Integration End Signal, Readout Signal Control, HD Trigger Timing Control Integration End Signal, Readout Signal Control, HD Trigger Timing Control I/O Ports: 4 Programmable Input / Output Ports (2 input Ports & 2 Output Ports) 4 Programmable Input / Output Ports (2 input Ports & 2 Output Ports) Scanning Methods: Full Progressive, Partial (1/1, 1/2, 1/4), Variable, Binning ( models) Full Progressive, Partial (1/1, 1/2, 1/4), Variable, Binning ( models) Sync System: Internal Sync Internal Sync Shutter Speed: Auto / Manual Auto / Manual Minimum Illumination: 0.08 Lux @ F1.2, 50 IRE 2.24 Lux @ F1.2, 50 IRE 0.11 Lux @ F1.2, 50 IRE 5.28 Lux @ F1.2, 50 IRE 0.18 Lux @ F1.2, 50 IRE 3.94 Lux @ F1.2, 50 IRE 0.12 Lux @ F1.2, 50 IRE 2.7 Lux @ F1.2, 50 IRE Extended Low Light: Extended Low Light Capability via Software Trigger Extended Low Light Capability via Software Trigger Gain: Auto / Manual (Analog and Digital Gains set independently via Software) Auto / Manual (Analog and Digital Gains set independently via Software) Gamma: Manual (Set via Software) Manual (Set via Software) Lens Mount: CS Mount / Micro Lens Mount CS Mount / Micro Lens Mount C-Mount White Balance: Camera: Auto / Manual / One-Shot (Set via Software) Camera: Auto / Manual / One-Shot (Set via Software) Video Output: USB 2.0 High Speed USB 2.0 High Speed Connectors: Mini USB (Lock Down Type Available) & USB Signal on the 12 pin Hirose Mini USB (Lock Down Type Available) & USB Signal on the 12 pin Hirose Shock and Vibration: Vibration: 10G (20 to 200Hz), Shock: 70G (3 directions, 3 times each) Vibration: 10G (20 to 200Hz), Shock: 70G (3 directions, 3 times each) Input Voltage: +5Vdc via USB port or 12 Pin Connector +5Vdc via USB port or 12 Pin Connector STC-TB202USB-AH or ASH STC-TC202USB-AH or ASH U (2 Megapixel) 1600 (H) x 1200 (V) 1600 (H) x 544 (V) 1600 (H) x 208 (V) 1/1.8 CCD (ICX274AL) 1/1.8 CCD (ICX274AQ) 15 fps 0.11 Lux @ F1.2, 50 IRE 1.39 Lux @ F1.2, 50 IRE Power Consumption: 1.75W, < 350mA 1.65W, < 320mA 2.15W, < 430mA 2.25W, < 450mA 2.50W, < 500mA Operating Temperature: 0 ~ 40 C (32 ~ 104 F) 0 ~ 40 C (32 ~ 104 F) Storage Temperature: -30 ~ 65 C (-22 ~ 149 F) -30 ~ 65 C (-22 ~ 149 F) Dimensions: 50 (W) x 50 (H) x 35.8 (D) mm (2 x 2 x 1.4 ) 50 (W) x 50 (H) x 35.8 (D) mm (2 x 2 x 1.4 ) Weight: Approximately 112g (3.95oz) Approximately 112g (3.95oz) 27
USB 2.0 Series Cased Sentech s Standard USB 2.0 cameras are available with progressive scan color or monochrome CCDs. The feature rich Camera Control Software includes image capture, digital zoom and a user based menu with simple and advanced menus. This series is available in a cased or board configuration with a top or rear USB connector. Standard Models Board Cased Models Board Models Without Lens Mount 51 mm 44.3 51 Top Connector Rear Connector U 2 MEGAPIXEL STC-TB202USB-A STC-TC202USB-A STC-TB152USB-A STC-TC152USB-A STC-TB133USB-A STC-TC133USB-A STC-TB83USB-A STC-TC83USB-A STC-TB33USB-A STC-TC33USB-A 2 MEGAPIXEL U STC-TB202USB-B STC-TC202USB-B STC-TB152USB-B STC-TC152USB-B STC-TB133USB-B STC-TC133USB-B STC-TB83USB-B STC-TC83USB-B STC-TB33USB-B STC-TC33USB-B 45 mm CS Mount Micro Lens Mount 45 Rear Connector Top Connector 28 29
Specifications USB 2.0 Standard Models Monochrome STC-TB33USB-A or B STC-TC33USB-A or B STC-TB83USB-A or B STC-TC83USB-A or B STC-TB133USB-A or B STC-TC133USB-A or B STC-TB152USB-A or B STC-TC152USB-A or B STC-TB202USB-A or B STC-TC202USB-A or B Resolution: Full (0.3 Megapixel) 640 (H) x 480 (V) 640 (H) x 224 (V) 640 (H) x 80 (V) (0.8 Megapixel) 1024 (H) x 768 (V) 1024 (H) x 344 (V) 1024 (H) x 136 (V) (1.2 Megapixel) 1280 (H) x 960 (V) 1280 (H) x 440 (V) 1280 (H) x 168 (V) (1.4 Megapixel) 1360 (H) x 1024 (V) 1360 (H) x 472 (V) 1360 (H) x 176 (V) U (2 Megapixel) 1600 (H) x 1200 (V) 1600 (H) x 544 (V) 1600 (H) x 208 (V) Imager Sensor: 1/3 CCD (ICX424AL) 1/3 CCD (ICX424AQ) 1/3 CCD (ICX204AL) 1/3 CCD (ICX204AK) 1/3 CCD (ICX445AL) 1/3 CCD (ICX445AQ) 1/2 CCD (ICX205AL) 1/2 CCD (ICX205AK) 1/1.8 CCD (ICX274AL) 1/1.8 CCD (ICX274AQ) Signal Format: Progressive: Monochrome or Progressive: Monochrome or Maximum Frame Rates: Full Scan 240 fps 22 fps 44 fps 89 fps 19 fps 38 fps 77 fps 15 fps Pixel Clock Frequencies: 24.5 MHz 29.5 MHz 36.8 MHz Trigger Mode: Software Trigger (Free-run / Edge preset / Pulse Width / Start & Stop) Software Trigger (Free-run / Edge preset / Pulse Width / Start & Stop) Trigger Controls: Integration End Signal, Readout Signal Control, HD Trigger Timing Control Integration End Signal, Readout Signal Control, HD Trigger Timing Control Scanning Methods: Full Progressive, Partial (1/1, 1/2, 1/4), Variable, Binning ( models) Full Progressive, Partial (1/1, 1/2, 1/4), Variable, Binning ( models) Sync System: Internal Sync Internal Sync Shutter Speed: Auto / Manual Auto / Manual Minimum Illumination: 0.08 Lux @ F1.2, 50 IRE 2.24 Lux @ F1.2, 50 IRE 0.5 Lux @ F1.2, 50 IRE 1.5 Lux @ F1.2, 50 IRE 0.18 Lux @ F1.2, 50 IRE 3.23 Lux @ F1.2, 50 IRE 0.07 Lux @ F1.2, 50 IRE 3.22 Lux @ F1.2, 50 IRE 0.11 Lux @ F1.2, 50 IRE 1.39 Lux @ F1.2, 50 IRE Extended Low Light: Extended Low Light Capability via Software Trigger Extended Low Light Capability via Software Trigger Gain: Auto / Manual (Analog and Digital Gains set independently via Software) Auto / Manual (Analog and Digital Gains set independently via Software) Gamma: Manual (Set via Software) Manual (Set via Software) Lens Mount: CS Mount / Micro Lens Mount CS Mount / Micro Lens Mount C-Mount White Balance: Camera: Auto / Manual / One-Shot (Set via Software) Camera: Auto / Manual / One-Shot (Set via Software) Video Output: USB 2.0 High Speed USB 2.0 High Speed Connectors: Standard USB (Lock Down Type Available) B Style Standard USB (Lock Down Type Available) B Style Shock and Vibration: Vibration: 10G (20 to 200Hz), Shock: 70G (3 directions, 3 times each) Vibration: 10G (20 to 200Hz), Shock: 70G (3 directions, 3 times each) Input Voltage: +5Vdc via USB Connector +5Vdc via USB Connector Power Consumption: 1.75W, < 350mA 1.60W, < 320mA 2.5W, < 500mA 2.25W, < 450mA 2.80W, < 560mA Operating Temperature: 0 ~ 40 C (32 ~ 104 F) 0 ~ 40 C (32 ~ 104 F) Storage Temperature: -30 ~ 65 C (-22 ~ 149 F) -30 ~ 65 C (-22 ~ 149 F) Dimensions: Cased: 51 (W) x 51 (H) x 44.3 (D) mm (2 x 2 x 1.74 ) Board: 45 (W) x 45 (W) x Var. (1.77 x 1.77 x Var.) Cased: 51 (W) x 51 (H) x 43.3 (D) mm (2 x 2 x 1.70 ) Board: 45 (W) x 45 (W) x Var. (1.77 x 1.77 x Var.) Weight: Cased: Approximately 145g (5.11oz), Board Approximately: 45g (1.58oz) Cased: Approximately 145g (5.11oz), Board Approximately: 45g (1.58oz) 31
Specifications Micro CMOS USB Specification USB 2.0 Model Micro CMOS USB The brand new Micro CMOS USB 2.0 camera is ideal for facial recognition applications in gaming machines, ATMs, and kiosks. Boasting a minimal 32 (W) x 28 (H) x 26.15 (D) mm size, the STC-MC36 is the smallest model in our USB camera line. The STC-MC36 is capable of outputting and is equipped with a 1/6 CMOS Sensor. With an extremely low cost, the STC-MC36 is one of Sentech s easiest to use, and affordable cameras. Simulated Size Resolution: Imager Sensor: Active Resolution: Pixel Size: Scanning System: Frame Rate: Sync System: Video Output: Lens: Field of View: Adjustable Properties: STC-MC36USB (0.3 Megapixel) 1/6 CMOS (PAS6311LT (PixArt) 640 (H) x 480 (V) 3.6 (H) x 3.6 (V) μm Progressive: Up to 30fps Internal USB 2.0 and 1.1 Compliant USB Video Class 1.1 Compliant f = 2.3 mm, F2.0 (Pint position: 30 to 70cm) Diagonally: 68⁰, Horizontally: 55⁰, Vertically 42⁰ Software Adjustable Brightness (1 to 255) Contrast (1 to 200) Gamma (1 to 100) Saturation (1 to 200) Hue (-180 to 180) Sharpness (1 to 10) White Balance: Auto (2800K to 6500K) Power: - Input Voltage 5 V via USB Port - Consumption < 0.5 W Operating Temperature: Storage Temperature: -5⁰ ~ 50⁰C (23 ~ 122 F) -20⁰C ~ 80⁰C (-4 ~ 176 F) Dimensions: 32 (W) x 28 (H) x 26.15 (D) mm (1.25 x 1.1 x 1.03 ) (including the lens) Weight: Approximately 13g (0.46oz) New! Low Cost! Micro CMOS USB Model STC-MC36USB Key Features Plug and play Low Cost M12 Lens Mount Integral Mounting Brackets 1/6 CMOS Sensor 32 mm Bottom View 28 26.15 33