Advanced DMX for Control4 version 2.2.1 (1902) Quick Start Guide 1 Connect the RS 232 DMX Engine to your Control4 Controller using a DB9 straight serial cable with NO PIN4 (try not use homemade cable). Control4 3.5mm to DB9 cable will work as is with no modification. Advanced DMX Driver for Control4 1
2 Connect the XLR Output of the DMX Engine to your DMX Decoders and connect to output of your DMX Decoder to the LED To next decoder 12 24v 12 24v 12 24v 12 24v RGB LED Strip RGB LED Strip White LED Strip RGBW LED Strip RGBW LED Strip Check this video for more explanation: https://youtu.be/4pu3hswrilm Advanced DMX Driver for Control4 2
3 Set the channel on each DMX decoder Using any free DMX Calc mobile app or the included PDF chart. https://play.google.com/store/apps/details?id=com.dezelectric.dipswitch&hl=en http://www.look4ideas.com/techstuff/dmxchart.pdf FUN Switch must be OFF! Set each decoder to the same channel if you want the LED strip to react all together or set them to different channels if you want them to be controlled independently. An RGB decoder use 3 channels and the 12 channel decoder will use 12 channels, so the next decoder connected must use a channel number stepped by those numbers. To DMX Engine Ch 1 Ch 4 Ch 7 Ch 10 Next will be Ch 22 Advanced DMX Driver for Control4 3
4 Add the RS 232 DMX Engine driver to the project and enter a valid license Advanced DMX Driver for Control4 4
5 Bind the DMX Engine to the right serial port (do NOT use HC 250 Serial Ports!) and validate communication using the Status Property IMPORTANT: your DMX Engine must be running firmware v5.072 or later! If any error shows here, please check the Troubleshooting section. Advanced DMX Driver for Control4 5
6 Go to the Action tab and try select the All Channel On action Validate that your DMX Lights turns all ON and if not, check the Troubleshooting section. Advanced DMX Driver for Control4 6
7 Add individual driver for each DMX load type you want to control Here s the description of each available driver: DMX Dimmer and DMX Switch Single Channel Dimmable or Relay Light A Simple dimmer for a single DMX Channel. Support Advanced Lighting Scene and all Control4 Light Proxy options. The DMX Switch have similar feature but does not support dimming. DMX RGB Dimmer RGB Light with Master and White Override A quad dimmer for a single group of RGB DMX Channels or RGBW via a separate device (White Override). A Master Dimmer option allow the use of an extra channel for Master Brightness or it can be simulated. Support Advanced Lighting Scene and all Control4 Light Proxy options. DMX Group and RGB Group Dimmer Easy control over a group of lights Same as the Single Dimmer and RGB Dimmer, but can control a group of light. Easiest way to present a single dimmer that control multiple sections of a single LED strip. Section splitting is sometime needed for boosting power. Does not support Advanced Lighting Scene. DMX ColorChanger w/ ColorWheel Easiest way to control RGB or RGBW lights Presented as a single dimmer slider, it can control RGB or RGBW color using each dimmer levels to match a custom palette. The ColorPicker option is a Color Wheel interface to easily set the light color using any touch screen device. https://youtu.be/ngjspctzz_i DMX Tunable White Dimmer Custom White and Temperature Control Allow creating a highly customizable white fixture from RGB, RGBWW or Dual White LED Strip. Allow warm dimming and cool to warm temperature control. DMX Effect Switch Create stunning color change effects in a minute Easily create color changing effect, chase, fireball, vortex and more in a minute using simple settings. No programming, no timer, and a simple On/Off switch to allow your customer to start his light show. DMX Sequencer / Sound to Light Combine effect to create a lightshow This driver allow to combine up to five DMX Effect Switch to create a dynamically changing lightshow triggered by timers or music beat. For more information, please check the documentation tab of each driver within Composer Pro Advanced DMX Driver for Control4 7
Troubleshooting Before contacting us, please check those simple resolution to common problem that happen frequently: Trouble Can t get the Firmware Version to show up in Properties Can t control any DMX lights Some DMX lights does not work Not all features are working Common causes Make sure the DMX Engine is powered up and running by checking the LED on the DMX Engine (two LED steady and DMX LED flashing rapidly) Make sure you re using a molded Male Female DB9 Straight Cable (no homemade cable) Make sur you ve removed the PIN4 on the Male DB9 connector of your cable Make sure the Binding is done to the correct controller s serial port in Composer. You can also try to switch to another serial port. Make sure your license code is valid Check the DMX Engine power supply, do NOT use a third party replacement power supply, only use the one bundled with the DMX Engine Make sure the firmware version is show in the DMX Engine driver property Try the All Channel On action on the DMX Engine driver in Composer Check the soldering on the XLR Connector going into the DMX Engine Make sur your XLR to RJ45 cable is good and use the right pinout (or use a premade cable) Most DMX decoder have a status LED on it, check if this LED start flashing quickly when you plug the DMX cable in it. It should flash slowly when the cable is unplugged Try your DMX Decoder with any other DMX controller such as a light console or an USB DMX Interface, make sure they can work. Try to narrow down the faulty DMX Decoder by unplugging every decoder on your chain one by one Check the solder into ant of the XLR connector you re using Try your system with only one decoder hooked up to the DMX engine and make sure it work Confirm that your DMX Engine runs at least firmware version 5.072 Advanced DMX Driver for Control4 8
Advanced Lighting Scene does not come Active when activated Remove any RGB Dimmer s Master dimmer from the scene Do not use Group Dimmer in the scene All Lights turns off randomly for no reason Parallel tasks does not react well Check the DMX Engine Status property and ensure it shows the firmware version Make sure you re using the right power supply for the DMX Engine Check the LED on the DMX Engine and make sure the DMX light in flashing rapidly and constantly You may have too many effects that run with very little Hold For delay, using very little delay require more commands to be sent quickly thus may saturate the serial bus. If you have any other issue, please contact Blackwire support. Advanced DMX Driver for Control4 9
Thank you for your support! www.domaudeo.com info@domaudeo.com Check out our DMX Demo Video and Tutorials at: http://www.youtube.com/domaudeo Visit the Control4 Dealers Forum at: https://forums.control4.com/tm.aspx?m=299729&mpage=1&key=񉋑 or public forum at: http://www.c4forums.com/topic/18466 domaudeo advanced dmx rgbrgbwled and low voltage light control solution/ Advanced DMX Driver for Control4 10