HV310 Simplified Drive 册 0.5HP-15HP (0.4kW-11kW) 200V-240V / 380V-480V
>>HV310 Simplified Drive HV310 family is low power AC drive and easy to use with open loop(v/f and Vector) control. The HV310 has simple Status Display Panel instead of Keypad. It is designed for use in simple applications, like following applications: plastic machines, small pumps, printing machines, blowers, medical centrifuges, low power textile machines, and small milling machines. Label for S.N., power and voltage Status Display panel Control terninals RJ45 port for RS- 485 Modbus RTU EMC filter link( Fit or unfit the EMC filter Power and PE terminals HV310 series has the same performances and similar functions as the HV300. Its differences are as follows: Control terminals reduced to 12. I/O relays reduced to 1. Reduced parameters for simplified operation. Status display panel is standard, and LED keypad is selectable as an option. 02 www.hopewind.com
>>Features Hardware features Dual CPU processors using the latest PIM (power integrated module). Standard built-in brake unit. Wireless fan block design, easy to replace. Coating circuit boards for better environmental immunity. Selectable action on loss of control reference signal. Thermal model design, real-time calculation IGBT junction temperature to make sure IGBT working reliable. Connecting auxiliary fan makes the drive suitable for worse environment. Internal EMC filter with breakpoint design to fit or unfit filter easily. 0.1s urgent Acce.& Dece. running Performance features Advanced motor control. High performance open loop vector control. Excellent S-Ramp acceleration and deceleration profiling. Rapid automatic identification of motor parameters. 150% rated output current for 1 minute. Excellent low frequency torque output: 0.5Hz:100% torque, 1Hz:150 torque. Excellent voltage and current control Functional features Catch spinning motor function. AVR (Automatic Voltage Regulation) keeps output voltage stable during input voltage transients. Run at reduced capacity with single phase input in the event of loss of 3 phase input. 4 preset speeds (determined by control terminal inputs). DC injection brake. Skip frequency function to avoid undesirable resonant speeds. Standard MODBUS-RTU. Simple function blocks, easy to do the parameter setup. 0.5Hz urgent full load operation in V/F mode Excellent spinning Powerful electronic potentiometer function, convenient for reference adjustment. Comprehensive protection function: Fast protection for output shorts, over current, overload, over voltage, under voltage, phase loss, over heat (heat sink and junction), external trip, etc. Define the VF curve according to the torque characteristic to achieve optimal operation. 1. 1.2 power curve 2. 1.7 power curve 3. 2.0 power curve www.hopewind.com 03
>>Typical Wiring NOTE: All the programmable control terminals functions are factory default set. For control wire, recommend using unshielded twisted pair, shielded cable or shielded twisted pair. 5.5kW-11kW models (including 220V/4kW), inner DC Choke is fitted. Control terminals diagram RL1 RL2 0V AI1 10V AO1 DO1 24V 0V DI1 DI2 DI3 Control terminals and comms. port Type Terminal Name Function Tech. Spec. Serial Comms. RS485 RJ45 Port Two lines, Modbus RTU protocol Digital Input DI1-DI3 Programmable digital input terminals The common can be 0V or 24V by setting the P04.10 (default is 0V) Input resistance: 10 kω High, low logic threshold: 10V±1V, Sample time: 1ms Digital output DO1 Programmable digital output terminal 1 Output: 24V/0V, Max. output current: 50mA, Updating rate: 20ms Analogue Input & Output AI1 AO1 Programmable Analogue input 1 Programmable Analogue output 0V-10V, Input resistance: 100kΩ 0(4)mA-20mA, Load resistance:188ω Min. potentiometer resistance: 0.5kΩ Resolution: 0.1%, Accuracy: 2%, Sampling period: 5ms 0V-10V, Max. output current: 5mA Resolution: 0.4%, Accuracy: ±5% Updating rate: 5ms 10V Analogue reference rail Accuracy: 2%, Max. output current: 20mA 24V User supply Accuracy: ±15%, Max. output current: 100mA Rail supply & Relay 0V Common Common reference point for control signal RL1, RL2 Programmable Relay1 output contactor Default: Relay1 is closed when powered and healthy. Type: form A (normal open), Updating rate: 5ms Contactor rating: 250VAC/2A(cosφ=1) 250VAC/1A(cosφ=0.4), 30VDC/1A 04 www.hopewind.com
>>Options Options Model name Function LED keypad HV-LED Used for operating drives, can display data. Remote keypad HV-RM-Keypad Used for remote operation, (maximum 100 meter connecting cable) Keypad pallet Simple keypad pallet HV-Pad Fit HV-Pad Fit1 Used for keypad installation. Connection between the drive and the keypad cannot be more than 10 meters. Communication adapter HV-232 Adapts the drive's RS-485 port to RS-232 Communication adapter PC testing software HV-USB HVSOFT(PC Tools) Adapts the drive's RS-485 port to USB Interactive software (PC tools) between the computer and the drive, convenient and flexible debugging tools, and allows remote operation. Hopewind's free software suite makes it easier to access the drive's full feature set. It allows you to optimize the drive tuning, back up the configuration and set up communications networks. For most applications, drive commissioning can be done right from the keypad on the front of the drive. HVSOFT is a drive configuration tool for commissioning, optimizing and monitoring HV drives. It allows you to: Use the configuration wizards to commission your drive. Read, save and load drive configuration settings. Remotely control the drive with simulated run, stop, reverse and jog push buttons. View and analyze changing values within the drive on a software based oscilloscope. www.hopewind.com 05
>>Technical Specifications Input Power Input Voltage U in Input Frequency 200V(-10%)-240V(+10%) 1/3PH 380V(-10%)-480V(+10%) 3PH 48Hz-62Hz Maximum Supply Imbalance 3% Output Power Output Voltage Output Frequency Voltage Control Switching Frequency 0V-U in 0Hz-300Hz V/F, Open loop Vector Control 1kHz-15kHz Adjust Speed range Open loop vector -1:100, V/F mode -1:50 Start Torque 0.5Hz: 100% rated torque, 1Hz: 150% rated torque Torque Accuracy 5% Torque ripple 2% Speed accuracy Reference Resolution Accel. & Decel. Rate 1%n (Under the rated operating conditions) Digit- 0.01Hz, Analogue- 0.1% Max. frequency 0.1s-3600s Main Performance Function Voltage Boost 0.1%-30.0% Overload 150% rated output current, 1 minute V/F DC Braking 4 types: V/F (user can program) and ramp (2.0 power, 1.7 power, 1.2 power) Injection frequency: 0.0%-20.0% Max. frequency Injection current: 0.0%-300.0% rated current Injection time: 0.0s-60.0s Dynamic Braking Brake rate: 0.0%-100.0% Control Terminal Comms. Jog Preset AVR Reference Source Operation Mode Digital Input Terminals Analogue Input Terminal Analogue Output Terminal Status Relay Connectors Protocol Jog frequency: 0.00Hz-50.00Hz Jog interval time: 0.1s-60.0s 4 speeds (decided by control terminals) Maintain the rated output voltage when the input power supply voltage changed. Digit: Keypad, motorized pot (E-Pot), comms. Analogue: AI: 0V-10V, 0(4)mA-20mA With optional display panel, Control terminal, Serial comms. DI1-DI3: Programmable terminals DO1: Programmable terminal, Max. output current: 50mA AO1: programmable terminal, 0V-10V 1 programmable relay, contactor data: AC250V/2A(COSφ=1) AC250V/1A(COSφ=0.4) DC30V/1A RJ-45 Port Modbus RTU 06 www.hopewind.com
>>Model Description HV310 A0 2 T 00007 G B 1 Family HV310: Simplified 2 Supply voltage 2: 200V (-10%)-240V (+10%) 4: 380V (-10%)-480V (+10%) 6: 500V (-10%)-690V (+10%) Input phase D: 1 PH or 3 PH in, 3 PH out 3 4 5 Load type G: standard G type E: small size G type P: fan or pump Blank: GP type(dual rated type, for heavy-duty or normal-duty) Operation mode and cooling A0: Two-quadrant,air-cooled W0: Two-quadrant,water-cooled A1: Four-quadrant,air-cooled W1: Four-quadrant,water-cooled Power size 00007: 0.7kW 00075: 7.5kW 00150: 15kW 6 7 8 9 Brake unit B: Internal fitted Blank: None or external Mechanical dimensions Technical specifications Control Connection Options www.hopewind.com 07
>>Model Specifications 200-240V rating data Model Name Drive Power Size (kva) Rated Input Current (A) 1/3PH Rated Output Current (A) Motor Power (kw)/(hp) Size HV310-A02D00004GB 1.1 7.1/4 2.8 0.4(0.5) A HV310-A02D00007GB 1.9 12.8/7.1 5 0.75(1) A HV310-A02D00015GB 3.0 20.5/11.3 8 1.5(2) A HV310-A02D00022GB 4.2 24/14.5 11 2.2(3) B HV310-A02D00040GB 6.7 16.5 17.6 4(5) C 380-480V rating data Model Name Drive Power Size (kva) Rated Input Current (A) Rated Output Current (A) Motor Power (kw) / (HP) Size HV310-A04T00007GB 1.7 3.6 2.5 0.75(1) A HV310-A04T00015GB 2.8 5.7 4.2 1.5(2) A HV310-A04T00022EB 3.4 6.1 5.2 2.2(3) A HV310-A04T00022GB 3.8 8.3 5.8 2.2(3) B HV310-A04T00040GB 6.3 13.2 9.5 3.7(5) B HV310-A04T00055EB 8.6 14.3 13 5.5(7.5) B HV310-A04T00055PB 8.6 14.3 13 5.5(7.5) B HV310-A04T00055GB 8.6 12.4 13 5.5(7.5) C HV310-A04T00075GB 11 16.1 17 7.5(10) C HV310-A04T00110PB 15.2 21 23 11(15) C 08 www.hopewind.com
www.hopewind.com 09 >>Mechanical Dimensions >>Mechanical Mounting Size Model Name W W1 W2 H H1 D D1 Mounting Hole Φ(mm) (in.) Weight kg (lbs.) A HV310-A02D00004GB 97.4 (3.83) 80 (3.15) - 202.4 (7.97) 190 (7.48) 148.8 (5.86) - 5 (0.20) 1.4 (3.1) HV310-A02D00007GB HV310-A02D00015GB HV310-A04T00007GB HV310-A04T00015GB HV310-A04T00022EB B HV310-A02D00022GB 142 (5.59) 123.5 (4.86) - 220.4 (8.68) 208 (8.19) 155.5 (6.12) - 5 (0.20) 2.2 (4.9) HV310-A04T00022GB HV310-A04T00040GB HV310-A04T00055EB HV310-A04T00055PB C HV310-A02D00040GB 163.1 (6.42) 142 (5.59) - 300 (11.81) 280 (11.02) 176.8 (6.96) - 6 (0.24) 4.5 (9.9) HV310-A04T00055GB HV310-A04T00075GB HV310-A04T00110PB
: >>Certifications UL certification (UL508C). Full series pass CE and ROHS certification. Laboratory establishes cooperative relationship with a number of third party testing institutions with professional qualifications, including TUV, Intertek, TTS, MORLAB, CCIS, CGC, CQC, SMQ, etc. Hopewind drives pass TUV certification. Laboratory is awarded the ILAC - MAR/ CNAS qualification certificate. TUV ( Technischer Uberwachungs-Verein) ILAC-MAR/CNAS (International Laboratory Accreditation Cooperation) 10 www.hopewind.com
>>Service Despite our focus on innovation, Hopewind understands that customer service is second to nothing. From our customer's first technical inquiry to the product replacement, we are determined to provide you with a superior experience. Product Selection Tell us about your application, and our pre-sales support engineers will ensure alignment with the right product. Order & Delivery Our in-house manufacturing team is joined with an expertly managed supply chain, and coupled with multiple worldwide distribution centers. The result is the best lead times in the industry, regardless of your location or size of order. Installation and Commissioning Hopewind technicians are available to provide onsite or remote support for your installation. Our service technician feature remote management for proactive health monitoring of the equipment. Subscribing to this service results in the fastest possible identification and correction of service needs. Product Upgrade We will let you know when and why if a product upgrade becomes necessary. We make service easy. Worldwide Warranty services On-site preventative or corrective service Spare part services Technical support Pre-sales support services Professional technical training services www.hopewind.com 11
Shenzhen Hopewind Electric Co., Ltd. Building No.5, 2nd Industrial Zone of Guanlong Village, Xili, Nanshan District, Shenzhen, China, 518055 T e l:+86-755-86026786, Shenzhen (Headquarters) +86-10-82193180, Beijing (Office) 400-111-7588, Hotline www.hopewind.com Hopewind USA www.hopewindusa.com Copyright 2015: hopewind All rights reserved V4.0.1 Product specifications subject to change.