Fast Ethernet Web-Smart Switch user manual Models 523813 & 523820 INT-523813/523820-UM-0607-01
introduction Thank you for purchasing the INTELLINET NETWORK SOLUTIONS Fast Ethernet Web-Smart Switch (6 RJ-45 10/100 + 2 Fiber SC 100Base-FX Multi-Mode Ports, Model 523813 or 6 RJ-45 10/100 + 2 Fiber SC 100Base-FX Single-Mode Ports, Model 523820). The easy-to-follow instructions in this user manual help make setup and operation quick and simple, so you ll also soon be enjoying the benefits of these popular features: Six 10/100 Mbps auto-sensing Auto-MDIX RJ-45 ports automatically detecting optimal network speeds Two 100Base-FX multi-mode (Model 523813) or single-mode (Model 523820) Fiber SC duplex ports Fiber distance support: up to 2 km (62.5/125 or 50/125 µm cable) Configuration via Web browser Supports NWay Auto-Negotiation Store and forward switching architecture Full/half duplex operation IEEE 802.3x flow control for full duplex Zero packet loss back-pressure flow control for half duplex Packet filtering/forwarding rates: 148,800 pps (100 Mbps), 14,880 pps (10 Mbps) Supports port-based VLAN, 4 groups Supports three types of QoS: port-based, 802.1p and DiffServ Supports Spanning Tree protocol Bandwidth control for all ports with 8 levels Broadcast storm control Supports MAC address port security Supports user-defined maximum forwarding packet size (1536 or 1552) Supports up to 1024 MAC address entries 128 kbytes buffer memory Lifetime Warranty
FCC Warning This device has been tested and found to comply with limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These specifications are designed to provide reasonable protection against interference with radios and TVs in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If interference does occur, the following measures are suggested to rectify the problem: Move the device away from affected radios or TVs Plug the device into a different electrical outlet Discuss the problem with a qualified radio/tv technician CE Mark Warning This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. setup/installation Ports & Indicators Six RJ-45 ports (1 6) and two Fiber ports (7 8) on the front panel connect to servers, workstations or other devices. Any port can be an uplink port shared with another hub or switch to expand and share the same function. Corresponding LEDs light green to indicate power to a port. The AC power outlet is located on the rear panel. LED display RJ-45 ports Fiber ports
Connecting to PCs, Servers & Other Network Devices Use straight-through twisted-pair cable (Cat5) to connect the switch to PCs, servers and other network devices. Networks can be built as shown. Connecting to Another Switch or Hub Use either straight-through twisted pair or crossover cable to connect the switch to another switch or hub.
specifications Standards IEEE 802.3 (Twisted Pair Ethernet) IEEE 802.3u (Twisted Pair/Fiber Optic Fast Ethernet) IEEE 802.3x (flow control, for full duplex mode) IEEE 802.1p (QoS) General Media support: - 10Base-T Cat3, 4, 5 UTP/STP RJ-45-100Base-TX Cat5 UTP/STP RJ-45-100Base-FX multi-mode 62.5/125 or 50/125 µm Fiber (Model 523813) - 100Base-FX single-mode 9/125 µm Fiber (Model 523820) Connectors: - Six RJ-45 ports, 100Base-TX - Two Fiber SC duplex ports, 100Base-FX Distances: - 2 km (62.5/125 or 50/125 µm Fiber cable, Model 523813) - 20 km (9/125 µm Fiber cable, Model 523820)) - 100 m (RJ-45 cable) Wavelength: 1310 nm Packet filter/forwarding rate: - 148,800 pps (100 Mbps) - 14,880 pps (10 Mbps) Backplane speed: 1.6 Gbps Buffer memory: 128 kbytes MAC address table: 1,024 entries Switch architecture: store and forward Certifications: FCC Class B, CE Mark Smart Features Port-based VLAN: 4 groups QoS Quality of Service:
- port-based - tag-based - DiffServ Port configuration options - enable/disable - 10, 100 Mbps or auto-negotiation - full duplex or half duplex - bandwidth control - MAC address port security enable/disable Bandwidth control options: 128 kbps, 256 kbps, 512 kbps, 1,024 kbps, 2,048 kbps, 4,096 kbps, 8,192 kbps, no limit LEDs Power Link/Tx 10/100 Mbps Power Internal power supply, 100 240 V AC, 50/60 Hz Power consumption: 4 Watts (maximum) Environmental Metal housing, desktop size Dimensions: 230 (W) x 123 (L) x 44 (H) mm (9 x 4.8 x 1.7 in.) Weight: 0.9 kg (2.0 lbs.) Operating temperature: 0 60 C (32 140 F) Operating humidity: 10 90% RH, non-condensing Storage temperature: -20 90 C (-4 194 F) Package Contents Fast Ethernet Web-Smart Switch 19 mounting brackets Power cable User manual
NOTES
www.intellinet-network.com Are you completely satisfied with this product? Please contact your INTELLINET NETWORK SOLUTIONS dealer with comments or questions. Copyright INTELLINET NETWORK SOLUTIONS All products mentioned are trademarks or registered trademarks of their respective owners.