Multipurpose Controllers DMC2 Multipurpose Modular Controller Control different load types with one device The Philips Dynalite DMC2 provides multichannel control via two interchangeable output modules. The device is available with a variety of control modules to handle various load types and capacities.
DMC2 Control different load types with one device Single controller solution Control a multitude of load types from one device, suited to any segment requiring lighting or relay control. Phase-cut dimming module Selectable per channel for leading or trailing edge output. Compatible with most dimming loads. Signal dimming module Suitable for controlling 1-10 V, DSI and DALI broadcast drivers. Built-in relays remove power when channel level is at 0%. Relay control module Suitable for controlling most types of switched loads. Flexible mounting solution Surface or recess mountable enclosure. Passive cooling Fanless design reduces noise, power consumption and maintenance costs. Dimensions 441 mm (17.36 in) 523 mm (20.59 in) 540 mm (21.26 in) 285 mm (11.22 in) 352 mm (13.86 in) 380 mm (14.96 in) 106 mm (4.17 in) 2 DMC2 Multipurpose Modular Controller Specification Sheet
Specifications Due to continuous improvements and innovations, specifications may change without notice. DMC2 Multipurpose Modular Controller Enclosure Dimensions (H x W x D) Construction 540 x 380 x 106 mm (21.26 x 14.96 x 4.17 in) 8.9 kg (19.62 lb) (enclosure only) Galvanized steel enclosure Powder-coated front covers Output Module Bays 2 Mains/Output Cable Entry** Data Cable Entry** 15 x Ø 28.2 mm (1.11 in) knockout 12 x Ø 22.2 mm (0.87 in) knockout 2 x Ø 28.2 mm (1.11 in) knockout Environment Operating Temperature Storage/Transport Temperature Humidity IEC Pollution Degree Compliance Certification 0 to 40 C ambient (32 to 104 F) -25 to 70 C ambient (-13 to 158 F) 0 to 90% non-condensing II CE, RCM, UL/cUL, FCC, ICES, RoHS Supply Module - DSM2 Supply Type Single-Phase Supply Three-Phase Voltage Supply Terminals Supply Terminal Conductor Size IEC Overvoltage Category Single-phase Three-phase, four wire ( ) 120/230/277 VAC @ 63 A 120/230/277 VAC (±10%) @ 32 A/phase 4 x screw terminal Line 1, Line 2, Line 3, Neutral (Earth link bar provided) 16 mm 2 (#6 AWG) (max) III 3 120/230/277 V ± 10% 3 x 32 A 1 1 x 63 A N + Communication Module - DCM-DyNet Serial Ports Supported Protocols DyNet DC Output Voltage DyNet DC Output Current User Controls Indicators 1 x RS-485 1 x DMX Rx 1 x UL924* DyNet DyNet2 12/24 VDC 200 ma 1 x service switch 1 x channel override keypad 1 x service LED RS-485 Terminals DMX Rx Channels DMX Terminal 3 x RJ12 1 x 5-way pluggable screw terminal 512 (max) 1 x 3-way pluggable screw terminal Dry Contact Inputs + UL924* 4 + 1 Dry Contact + UL924* Terminal Terminal Conductor Size 1 x 10-way pluggable screw terminal 4 mm 2 (#11 AWG) (max) * This function must only be used with systems complying to UL924, and must not be used with any other system. ** Ø 35 mm (1.38 in) knockout is suitable for 1 inch conduit Ø 28.2 mm (1.11 in) knockout is suitable for ¾ inch conduit DMC2 Multipurpose Modular Controller Specification Sheet 3
Electrical +24 V GND Supply Module BUS Output Module 1 BUS Output Module 2 BUS Communications Module 4 DMC2 Multipurpose Modular Controller Specification Sheet
Signal Dimming Control Modules DMD310, DMD316 Signal dimming control Control Channel Outputs 3 (DALI Addressable, DALI Broadcast, DSI, 1-10 V) Switched Outputs 3 DMD310-CE 1.8 kg (3.97 lb) 3 x 10 A dual pole C-curve circuit breaker DALI 64/CH 192 DSI 64/CH 192 1-10 V 50/CH 150 CH1 DA+ CH1 DA 6 mm 2 10+ AWG DMD316-CE 3 x 16 A dual pole C-curve circuit breaker DMD310-RCBO-CE 3 x 10 A C-curve RCBO DMD316-RCBO-CE DMD316-UL 3 x 16 A C-curve RCBO 3 x 20 A dual pole C-curve circuit breaker (UL489 listed) N-1 Lout-1 16 mm 2 5+ AWG Control Channel Output Capacity DALI/DSI* Channel Device DMD310 / DMD316 Output Voltage 13 VDC Guaranteed Current Maximum Current 160 ma 190 ma Maximum Drivers 64 192 Insulation Basic 1-10 V Channel Current * Supports Class 1 / Class 2 wiring sink 50 ma source 50 ma Switched Output Ratings Maximum Rating per Output Load Type DMD310 DMD316 Electronic Driver Inrush Current 10 A, 277 VAC 16 A, 277 VAC 500 A DMD316FR-UL Signal dimming control 4 Control Channel Outputs 3 (DALI Broadcast, DSI, 1-10 V) N Switched Outputs 3 x 16 A feed-through 1.8 kg (3.97 lb) SUPPLY DA+ DA 16 A/CH 48 A 6 mm 2 9+ AWG MODULE 2 DMD316- FR-UL Control Channel Output Capacity DALI/DSI* Channel Device Output Voltage Guaranteed Current Maximum Current 13 VDC 150 ma 250 ma Maximum Drivers 64 192 Insulation Basic 1-10 V Channel Current * Supports Class 1 / Class 2 wiring sink 50 ma source 50 ma 5 Switched Output Ratings Load Type IEC Overvoltage Category III µp 1-10 V, DSI & DALI 1-10 V, DSI & DALI 1-10 V, DSI & DALI D+ CH1 D D+ CH2 D D+ CH3 D Maximum Rating per Output CH1-CH3 (UL) Federal Communications Commission (FCC) Compliance Notice: Radio Frequency Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits 20 A, 347 VAC are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may Electronic cause harmful interference Driverto radio communications. However, there is no guarantee that interference will not occur 16 A, 347 VAC in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and 9.8 FLA (½ HP), 110-125 VAC receiver. Motor Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/tv technician for help. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada. CH1 CH2 CH3 CH1-CH3 (CSA) General Use 20 A, 300 VAC 20 A, 347 VAC 20 A, 120 VAC 10 FLA (1½ HP), 220/277 VAC DMC2 Multipurpose Modular Controller Specification Sheet 5
Phase-Cut Dimming Control Modules DMP310GL Output Channels Phase-cut dimming control 3 x Leading/Trailing Edge Dimming Maximum Module Load Output Terminal Conductor Size 14 A 6 x 16 mm 2 (#6 AWG) (max) 2.1 kg (4.63 lb) 120-240 V 10 A/CH 277 V 4.3 A/CH 14 A 14 A N-1 DMP310GL-CE 3 x 10 A dual pole C-curve circuit breaker Lout-1 DMP310GL-RCBO-CE DMP310GL-UL 3 x 10 A C-curve RCBO 3 x 20 A dual pole C-curve circuit breaker (UL489 listed) N-2 Lout-2 16 mm 2 Output Ratings/Channel (CH) 5+ AWG Load Type Operating Mode 120 / 240 VAC 277 VAC Leading / Trailing Edge Leading Edge 10 A 4.3 A Electronic Driver Trailing Edge N-3 Lout-3 DMP603GL Output Channels Phase-cut dimming control 6 x Leading/Trailing Edge Dimming Maximum Module Load Output Terminal Conductor Size 16 A 12 x 6 mm 2 (#10 AWG) (max) 2.3 kg (5.07 lb) 120-240 V 3 A/CH 277 V 1.7 A/CH 16 A 16 A DMP603GL-CE DMP603GL-RCBO-CE 6 x 10 A dual pole C-curve circuit breaker 6 x 10 A C-curve RCBO -Ch1 -Ch2 -Ch3 DMP603GL-UL 6 x 20 A dual pole C-curve circuit breaker (UL489 listed) -Ch4 -Ch5 Output Ratings/Channel (CH) -Ch6 Load Type Operating Mode 120 / 240 VAC 277 VAC 16 mm 2 Leading / Trailing Edge 5+ AWG Leading Edge 3 A 1.7 A Electronic Driver Trailing Edge 1 120-277 V ± 10% 16 A 3 120/230/277 V ± 10% 3 x 16 A N A CH 1 CH 2 N B CH 3 CH 4 N C CH 5 CH 6 µp 6 DMC2 Multipurpose Modular Controller Specification Sheet
Relay Control Modules DMR310, DMR316 Relay control Switched Outputs 3 Output Terminal Conductor Size 6 x 6 mm 2 (#10 AWG) (max) DMR316 16 A/CH 1.7 kg (3.75 lb) DMR310-CE 3 x 10 A dual pole C-curve circuit breaker DMR316-CE 3 x 16 A dual pole C-curve circuit breaker 16 mm 2 DMR310-RCBO-CE 3 x 10 A C-curve RCBO N-1 Lout-1 5+ AWG DMR316-RCBO-CE 3 x 16 A C-curve RCBO N-2 Lout-2 DMR316-UL 3 x 20 A dual pole C-curve circuit breaker (UL489 listed) N-3 Lout-3 Switched Output Ratings Load Type DMR310 Maximum Rating per Output DMR316 Electronic Driver Motor Inrush Current 10 A, 277 VAC 16 A, 277 VAC 9.8 FLA (½ HP) 120 VAC 10 FLA (1 ½ HP) 230/277 VAC 500 A??? 16 FLA (½ HP) 120 VAC 12 FLA (1 ½ HP) 230/277 VAC DMR610GL Relay control Switched Outputs 6 Maximum Module Load 30 A Output Terminal Conductor Size 12 x 16 mm 2 (#6 AWG) (max) 1.9 kg (4.19 lb) 10 A/CH 48 A DMR610GL-CE DMR610GL-RCBO-CE DMR610GL-UL 6 x 16 A dual pole C-curve circuit breaker 6 x 16 A C-curve RCBO 6 x 20 A dual pole C-curve circuit breaker (UL489 listed) -Ch1 -Ch2 -Ch3 -Ch4 Switched Output Ratings Load Type Maximum Rating per Output -Ch5 -Ch6 Electronic Driver Motor Inrush Current 10 A, 277 VAC 9.8 FLA (½ HP) 120 VAC 10 FLA (1 ½ HP) 230/277 VAC 500 A 6 mm 2 10+ AWG Maximum Group Load CH1-CH2, CH3-CH4, CH5-CH6 10 A DMC2 Multipurpose Modular Controller Specification Sheet 7
Ordering Codes Product Philips 12NC DMC2-CE 913703666109 DMC2-UL 913703666009 Accessories DINGUS-DMC-UL (dual RJ12 connector - pack of 10) 913703064209 Modules DSM2 (DMC2 Supply module) 913703500509 DCM-DyNet (DyNet Comms module) 913703666209 DMD310-CE (3 x 10 A Signal dimmer control) 913703666609 DMD310-RCBO-CE (3 x 10 A Signal dimmer control) 913703667109 DMD316-CE (3 x 16 A Signal dimmer control) 913703666709 DMD316-RCBO-CE (3 x 16 A Signal dimmer control) 913703667209 DMD316-UL (3 x 16 A Signal dimmer control) 913703667509 DMD316FR-UL (3 x 16 A Signal dimmer control) 913703668709 DMR310-CE (3 x 10 A Relay control) 913703666409 DMR310-RCBO-CE (3 x 10 A Relay control) 913703666909 DMR316-CE (3 x 16 A Relay control) 913703666509 DMR316-RCBO-CE (3 x 16 A Relay control) 913703667009 DMR316-UL (3 x 16 A Relay control) 913703667409 DMR610GL-CE (6 x 10 A Relay control) 913703668209 DMR610GL-RCBO-CE (6 x 10 A Relay control) 913703668309 DMR610GL-UL (6 x 10 A Relay control) 913703668109 DMP310GL-CE (3 x 10 A Phase cut dimmer) 93703666809 DMP310GL-RCBO-CE (3 x 10 A Phase cut dimmer) 913703667309 DMP310GL-UL (3 x 10 A Phase cut dimmer) 913703667609 DMP603GL-CE (6 x 3 A Phase cut dimmer) 913703668509 DMP603GL-RCBO-CE (6 x 3 A Phase cut dimmer) 913703668609 2019 Signify Holding. All rights reserved. Specifications are subject to change without notice. No representation or warranty as to the accuracy or completeness of the information included herein is given and any liability for any action in reliance thereon is disclaimed. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. All other trademarks are owned by Signify Holding or their respective owners. Revision 03 2019-02-08 lighting.philips.com/dynalite