Technical Support Matrix Serviceguard Disaster Recovery Products Compatibility and Feature Matrix (Metrocluster with 3PAR Remote Copy) - Linux and HPUX Version 3.14, Nov 25, 2016 1
Serviceguard Disaster Recovery Products Compatibility and Feature Matrix (Metrocluster with 3PAR Remote Copy on HPUX) NOTE: The tables on the following pages contain compatibility and features information for released versions of the HP Metrocluster with 3PAR Remote Copy product. Metrocluster with 3PAR Remote Copy Version A.01.00 (August 11) Documentation for this product version: www.hpe.com/info/hpuxserviceguard-docs HP Serviceguard Metrocluster with 3PAR Remote Copy PHSS_44455 enabled support for 3PAR 8K and 20K series arrays PHSS_43444 enabled support of InForm CLI based connection to the storage PHSS_43098 enabled asynchronous periodic mode replication PHSS_44455 enabled support for 3PAR Peer Persistence on physical machines. Release Notes: (5900-1882) UserGuide: (5900-1881) Software (on HPUX Server) HP-UX 11i v2 or HP-UX 11i v3 HP-UX SecureShell: A.04.50.021 and later or OpenSSH: 5.8 and later HP 3PAR Inform OS CLI 4 SG Version MCDR A.11.19 (HP-UX 11iV2) A.11.20 (HP-UX 11iV3) Enabler fileset Version A.10.01 3PAR Platform & Firmware 1,3 3PAR StoreServ8000: 3PAR StoreServ20000: 3PARInform OS version 3.2.2 8 and 3PAR StoreServ10000: 3PAR StoreServ7000: 3PARInform OS version 3.2.2 8, 3.2.1 7, 3.1.2 9, 3.1.3 7 and 3PAR F200/F400: 3PAR T400/T800: 3PARInform OS version 2.3.1 mu2 and future 3PAR Inform OS version 3.2.2 8, 3.2.1 7, 3.1.1, 3.1.2 9, 3.1.3 7 and Feature(s) Supported features in this version: 1. Synchronous Replication mode 2. Fully Provisioned and Thinly Provisioned Virtual Volumes 3. Bi-directional and 1-NRemote Copy configurations 4. 3PARVirtualDomains 5. Serviceguard package failover policies site_preferred and site_preferred_manual 6. LVM 1.0 /LVM 2.x /SLVM 7. VxVM 10 8. Oracle 10g R2/11g R1/11g R2 Single Instance database 9. Oracle 10g R2/11g R1/11g R2 Single Instance ASM on raw LVM volumes 10. Site controller Packages and Complex Workloads like OracleRAC (SLVM/CVM/CFS) 10 11. Support for HP Virtual Partitions v6.0 vpar as a Serviceguard Node 12. Support for HP vpar and Integrity VM v6.1,v6.1.5,v6.2,v6.3 VM/vPar as a Serviceguard Node and VM/vPar as a Serviceguard Package5 13. Support for Asynchronous Periodic Replication mode (requires PHSS_43098 ) 14. Support for 3PAR Peer Persistence on physical machines(requires PHSS_44455)
15. N-1 or 1- N Remote Copy Configuration with below mentioned condition: In an N-1 or 1-N Remote Copy topology, 3PAR allows only one of the pairs to be bi-directional, rest of the pairs will be unidirectional. 3Par recommends not to use the uni-directional pairs for Disaster Recovery. So, one can configure Metrocluster or Continentalclusters only between the arrays that are in a bidirectional configuration within a N1 or 1- N Remote Copy setup 16. Cluster verification and easy deployment support 17. cmpreparestg command over 3PAR Remote Copy Volume Group disks 18. Support for Smart Quorum with Serviceguard A.11.20 patch PHSS_44549 and Serviceguard Quorum Server A.04.00 patch PHSS_44550. 19. Support for configuration of asymmetric node count across sites using Smart Quorum in all Metrocluster deployments (including SADTA, CFS and SGeRAC). 6 HP Metrocluster 3PAR package will have impact if the HP 3PAR storage system is upgraded to any of the following 3PAR OS versions: 2.3.1 MU5 Patch35 or later 3.1.1 MU3 Patch27 or later 3.1.2 MU3 Patch16 or later Upon completion of upgrade, it is recommended to get the certificate file or certificate exception file saved in the default location. HP Metrocluster for 3PAR supports only the default location of the certificate or certificate exception file. It is recommended to follow respective HP 3PAR OS software upgrade instructions guide to upgrade your storage system and CLI upgrade The following 3PAR features are not supported with Metrocluster with 3PARRemote Copy A.01.00: 1. Support for Synchronous Long Distance configuration 2. Support for Unidirectional Remote Copy configuration 3. 3PARRemote Copy volume groups configured with fail_wrt_on_err policy. The following HP Serviceguard features are not supported for Metrocluster with 3PARRemote Copy A.01.00: 1. Easy Deployment of Metrocluster Packages using Serviceguard Manager 2. cmdrprev command 3. Legacy packages 4. 3
1 Note: This table represents what has been certified and is supported. If other storage, firmware or software versions are available but not indicated in this table, it is currently not supported by Metrocluster with 3PAR Remote Copy. The table will be updated when new versions are certified 2 Note: Support life for specific storage models (and associated microcode/software) may end sooner and will take precedence. Note: Metrocluster supports mixed clusters, where the cluster nodes can be HP 9000 and HP Integrity servers. The same restrictions/guidelines as Serviceguard will apply. Refer to the White Paper Configuration Rules for a Mixed HP 9000 / Integrity Serviceguard Cluster at www.hpe.com/info/hpux-serviceguard-docs -> Serviceguard 3 Note: 3PAR arrays allow a maximum of 16 to 64 SSH connections or 64 to 256 CLI connections based on array model and InformOS version. Prior to patch PHSS_43444 Metrocluster uses SSH for array communication and CLI from then on. Each Metrocluster package needs at least one SSH/CLI session. Please refer to your 3PAR array documentation for maximum supported CLI or SSH sessions. Ensure that sufficient SSH/CLI sessions will be available for Metrocluster packages during failover. Refer to the sections Managing CLI Connections to 3PAR array and Managing SSH Connections to 3PAR array in the manual for more information 4 Refer to 3PAR documentation to get information on supported versions of HP 3PAR Inform OS CLI on respective Operating Systems. 5 VM/vPar as a Serviceguard Package: It is not recommended to replicate Guest s/vpar s boot disk across sites as the boot disk on recovery site will have different WWID. So, it is recommended to have a separate boot disk image at each site with same Guest name. Any changes to the root disk must be manually synchronized between sites. 6 Note: HP Metrocluster 3PAR package will have impact if the HP 3PAR storage system is upgraded to any of the following 3PAR OS versions 2.3.1 MU5 Patch35 3.1.1 MU3 Patch27 3.1.2 MU3 Patch16 Please refer the respective release notes for more details. 7 3PAR Inform OS version 3.1.3 and 3.2.1 only available on HP-UX 11i v3 and require HP-UX 11i v3 patch PHSS_44164 8 Asynchronous streaming remote copy mode not supported 9 Note: When using 3PAR Inform CLI Version 3.1.2, there may be a considerable increase in the failover times of the Metrocluster packages. This is owing to a known faulty behavior during client connections with 3PAR OS Inform CLI version 3.1.2. This issue has been fixed in 3PAR OS Inform CLI version 3.1.3. Customer are advised to move to 3PAR OS Inform CLI version 3.1.3 10. To check if CVM/CFS and VxVM are supported with Serviceguard Metrocluster A.01.00 for a given combination of array and Serviceguard versions refer to the HP Serviceguard Solutions Storage Support Matrix (HP-UX) in www.hpe.com/info/hpux-serviceguard-docs/. Also ensure that a given 3PAR Inform OS CLI version has support for both CVM/CFS and the Metrocluster solution (listed in above table). For the Minimum required 3PAR Inform OS CLI version that supports CVM/CFS for a given array check the SPOCK web site: https://h20272.www2.hpe.com/spock ( HP 3PAR StoreServ 20000, 8000, 7000, 10000 Storage series FC HP-UX 11.31 IA Solution Software Veritas.)
Serviceguard Disaster Recovery Products Compatibility and Feature Matrix (Metrocluster with 3PAR Remote Copy on Linux) NOTE: The following tables contain compatibility and features information for released versions of the HP Metrocluster with 3PAR Remote Copy product. Metrocluster with 3PAR Remote Copy Version Softwa re on Linux Server SG Version 3PAR Platform & Firmware 1,5 Feature(s) B.12.00.51 SGLX_00536 Documentation for this product version: www.hpe.com/info/linuxserviceguard-docs RHEL 7 7.0 to 7.3 RHEL 6 6.1 to 6.8 RHEL 5 5.7 to 5.11 SLES12 (up to SP2) SLES 11 (SP2 to SP4) HP 3PAR Inform OS CLI 2 SG/LX A.12.00.51 3PAR 8000: 3PAR 20000: 3PAR Inform OS version 3.2.2 and 3PARF200/F400: 3PART400/T800: 3PARP10000: 3PAR Inform OS version 2.3.1 mu2 3 and future 3PAR Inform OS version 3.2.2, 3.2.1, 3.1.1, 3.1.2 6, 3.1.3 and 3PARStoreServ7000: 3PAR Inform OS version 3.2.2, 3.2.1, 3.1.3 and Supported features in this version: 1. Support for RHEL7.3 and SLES12 SP2. 5
Metrocluster with 3PAR Remote Copy Version Software on Linux Server SG Version 3PAR Platform & Firmware 1,5 Feature(s) B.12.00.50 SGLX_00531 Documentation for this product version: www.hpe.com/info/linuxserviceguard-docs RHEL 7 7.0 to 7.3 RHEL 6 6.1 to 6.8 RHEL 5 5.7 to 5.11 SLES12 (up to SP2) SLES 11 (SP2 to SP4) HP 3PAR Inform OS CLI 2 SG/LX A.12.00.50 3PAR 8000: 3PAR 20000: 3PAR Inform OS version 3.2.2 and 3PARF200/F400: 3PART400/T800: 3PARP10000: 3PAR Inform OS version 2.3.1 mu2 3 and future 3PAR Inform OS version 3.2.2, 3.2.1, 3.1.1, 3.1.2 6, 3.1.3 and 3PARStoreServ7000: 3PAR Inform OS version 3.2.2, 3.2.1, 3.1.3 and Supported features in this version: 1. Support for 3PAR Peer Persistence extended for Physical Machines in addition to support on VMware deployments already declared with B.12.00.40 (Supported with all Linux OS versions as supported by SGLX for Linux A.12.00.50).
Metrocluster with 3PAR Remote Copy Version Software on Linux Server SG Version 3PAR Platform & Firmware 1,5 Feature(s) B.12.00.40 (Dec 2015) Documentation for this product version: www.hpe.com/info/linuxserviceguard-docs RHEL 7.0 to 7.2 RHEL 6.1 to 6.8 RHEL 5.7 to 5.11 SLES12 (up to SP2) SLES 11 (SP2 to SP4) HP 3PAR Inform OS CLI 2 SG/LX A.12.00.40 3PAR 8000: 3PAR 20000: 3PAR Inform OS version 3.2.2 and 3PARF200/F400: 3PART400/T800: 3PARP10000: 3PAR Inform OS version 2.3.1 mu2 3 and future 3PAR Inform OS version 3.2.2, 3.2.1, 3.1.1, 3.1.2 6, 3.1.3 and 3PARStoreServ7000: 3PAR Inform OS version 3.2.2, 3.2.1, 3.1.3 and Supported features in this version: 1. Support for 3PAR Asynchronous Streaming Mode 2. Support for use of VMware Virtual Machine File System (VMFS) based storage in 3PAR Metrocluster packages. 3. Support for 3PAR Peer Persistence 7 with VMware deployments. 4. Support for Recovery Point Objective (RPO) Sensitive failover with 3PAR Metrocluster packages 7
1. This table represents what has been certified and is supported. If other storage, firmware or software versions are available but not indicated in this table, it is currently not supported by Metrocluster with 3PAR Remote Copy. The table will be updated when new versions are certified. 2. Refer to 3PAR documentation to get information on supported versions of HP 3PAR Inform OS CLI on respective Operating Systems. 3. mu - refers to update. 4. HP Metrocluster 3PAR package will have impact if the HP 3PAR storage system is upgraded to any of the following 3PAR OS versions 2.3.1 MU5 Patch35 3.1.1 MU3 Patch27 3.1.2 MU3 Patch16 Please refer the respective release notes for more details. 5. 3PAR arrays allow a maximum 64 to 256 CLI connections based on array model and InformOS version. Metrocluster for Linux uses CLI for array communication. Each Metrocluster package needs at least one CLI session. Please refer to your 3PAR array documentation for maximum supported CLI sessions. Ensure that sufficient CLI sessions will be available for Metrocluster packages during failover. Refer to the sections Managing CLI Connections to 3PAR array in the manual for more information. 6. When using 3PAR Inform CLI Version 3.1.2, there may be a considerable increase in the failover times of the Metrocluster packages. This is owing to a known faulty behavior during client connections with 3PAR OS Inform CLI version 3.1.2. This issue has been fixed in 3PAR OS Inform CLI version 3.1.3. Customer are advised to move to 3PAR OS Inform CLI version 3.1.3. 7. Serviceguard Metrocluster deployments using 3PAR Peer Persistence are supported only on VMware deployments. Not supported with Physical Machines.
Metrocluster with 3PAR Remote Copy Version Software on Linux Server SG Version 3PAR Platform & Firmware 1,5 Feature(s) B.12.00.30 Documentation for this product version: www.hpe.com/info/linuxserviceguard-docs RHEL 7.0 to 7.2 RHEL 6.1 to 6.8 RHEL 5.7 to 5.11 SLES12 (up to SP2) SLES 11 (SP2 to SP4) HP 3PAR Inform OS CLI 2 SG/LX A.12.00.30 3PARF200/F400: 3PART400/T800: 3PARP10000: 3PAR Inform OS version 2.3.1 mu2 3 and future 3PAR Inform OS version 3.2.2 6, 3.2.1, 3.1.1, 3.1.2 7, 3.1.3 and 3PARStoreServ7000: 3PAR Inform OS version 3.2.2 6, 3.2.1, 3.1.3 and Supported features in this version: 1. Support for Smart Quorum. 2. Support for configuration of asymmetric node count across sites using Smart Quorum. 4 HP Metrocluster 3PAR package will have impact if the HP 3PAR storage system is upgraded to any of the following 3PAROS versions 1. 2.3.1 MU5 Patch35 or later 2. 3.1.1 MU3 Patch27 or later 3. 3.1.2 MU3 Patch16 or later Upon completion of upgrade, it is recommended to get the certificate file or certificate exception file saved in the default location. HP Metrocluster for 3PAR supports only the default location of the certificate or certificate exception file. It is recommended to follow respective HP 3PAR OS software upgrade instructions guide to upgrade your storage system and CLI upgrade 9
1. This table represents what has been certified and is supported. If other storage, firmware or software versions are available but not indicated in this table, it is currently not supported by Metrocluster with 3PAR Remote Copy. The table will be updated when new versions are certified. 2. Refer to 3PAR documentation to get information on supported versions of HP 3PAR Inform OS CLI on respective Operating Systems. 3. Note: mu refers to update. 4. Note: HP Metrocluster 3PAR package will have impact if the HP 3PAR storage system is upgraded to any of the following 3PAR OS versions a. 2.3.1 MU5 Patch35 b. 3.1.1 MU3 Patch27 c. 3.1.2 MU3 Patch16 d. Please refer the respective release notes for more details. 5. Note: 3PAR arrays allow a maximum 64 to 256 CLI connections based on array model and InformOS version. Metrocluster for Linux uses CLI for array communication. Each Metrocluster package needs at least one CLI session. Please refer to your 3PAR array documentation for maximum supported CLI sessions. Ensure that sufficient C L I sessions will be available for Metrocluster packages during failover. Refer to the sections Managing CLI Connections to 3PAR array in the manual for more information. 6. Asynchronous streaming remote copy mode not supported 7. When using 3PAR Inform CLI Version 3.1.2, there may be a considerable increase in the failover times of the Metrocluster packages. This is owing to a known faulty behavior during client connections with 3PAR OS Inform CLI version 3.1.2. This issue has been fixed in 3PAR OS Inform CLI version 3.1.3. Customer are advised to move to 3PAR OS Inform CLI version 3.1.3.
Metrocluster with 3PAR Remte Copy Version Software on Linux Server SG Version 3PAR Platform & Firmware 1,5 Feature(s) B.12.00.00 (Mar 14) Documentation for this product version: www.hpe.com/info/linux-serviceguarddocs RHEL 5.7 RHEL 5.8 RHEL 5.9 RHEL 5.10 RHEL 6.1 RHEL 6.2 RHEL 6.3 RHEL 6.4 RHEL 6.5 RHEL 6.6 SLES11 SP2 SLES11 SP3 SLES11S P4 HP 3PAR Inform OS CLI 2 SG/LX A.12.00.0 0 3PARF200/F400: 3PAR Inform OS version 2.3.1 mu2 3 and future 3PAR Inform OS version 3.2.1, 3.1.1, 3.1.2 6, 3.1.3 and 3PART400/T800: 3PAR Inform OS version 2.3.1 mu2 3 and future 3PAR Inform OS version 3.2.1, 3.1.1, 3.1.2 6, 3.1.3 and 3PARP10000: 3PAR Inform OS version 3.2.1, 3.1.1, 3.1.2 6, 3.1.3 and 3PARStoreServ7000: 3PAR Inform OS version 3.2.1, 3.1.3 and Supported features in this version: 1. Synchronous Replication mode 2. Fully Provisioned and Thinly Provisioned Virtual Volumes 3. Remote Copy configurations 4. 3PARVirtual Domains 5. Serviceguard package failover policies site_preferred and site_preferred_manual 6. LVM / VxVM, VxFS 7. Support for Asynchronous Periodic Replication mode 8. DeviceMapper multipathing 9. N-1 or 1-N Remote Copy Configuration with below mentioned condition: In a N-1 or 1-N Remote Copy topology, 3PAR allows only one of the pairs to be bi-directional, rest of the pairs will be uni-directional. 3Par recommends not to use the unidirectional pairs for Disaster Recovery. So, one can configure Metrocluster or Continentalclusters only between the arrays that are in a bi directional configuration within a N-1 or 1- N Remote Copy setup. 10. Support for VMWare virtual machines as Metrocluster nodes using RDM only. Each Serviceguard Node should be part of different ESX host. 11. Persistent reservations support with device mapper multipathing 13. Cluster Verification support 14. 32 Node Support 15. Cluster Analytics 11
16. Easy Deployment of Metrocluster Packages using Serviceguard Manager B.12.00.00 17. cmpreparestg command over 3PAR Remote Copy Volume Group disks 18. 3PAR Remote Copy Failsafe mode is supported from Inform OSversion 19. Support for SADTA with Serviceguard for Linux Enterprise Edition A.12.00.20 3.1.3 onwards. (Note: With Inform OS 3.2.1 HP Serviceguard Metrocluster for 3 PAR requires MU1 or later to support failsafe mode). The following features are not supported with Metrocluster with 3PAR Remote Copy B.12.00.00: 1. Support for Synchronous Long Distance configuration 2. Support for Unidirectional Remote Copy configuration 3. 3PAR Remote Copy volume groups configured withfail_wrt_on_err policy. 4. RHEL 6 KVM Guest as Serviceguard Metrocluster Node not supported 5. Command preview cmdrprev not supported 4 HP Metrocluster 3PAR package will have impact if the HP 3PAR storage system is upgraded to any of the following 3PAROS versions 2.3.1 MU5 Patch35 or later 3.1.1 MU3 Patch27 or later 3.1.2 MU3 Patch16 or later Upon completion of upgrade, it is recommended to get the certificate file or certificate exception file saved in the default location. HP Metrocluster for 3PAR supports only the default location of the certificate or certificate exception file. It is recommended to follow respective HP 3PAR OS software upgrade instructions guide to upgrade your storage system and CLI upgrade
1. This table represents what has been certified and is supported. If other storage, firmware or software versions are available but not indicated in this table, it is currently not supported by Metrocluster with 3PAR Remote Copy. The table will be updated when new versions are certified. 2. Refer to 3PAR documentation to get information on supported versions of HP 3PAR Inform OS CLI on respective Operating Systems. 3. Note: mu refers to update. 4. Note: HP Metrocluster 3PAR package will have impact if the HP 3PAR storage system is upgraded to any of the following 3PAR OS versions 2.3.1 MU5 Patch35 3.1.1 MU3 Patch27 3.1.2 MU3 Patch16 Please refer the respective release notes for more details. 5. Note: 3PAR arrays allow a maximum 64 to 256 CLI connections based on array model and InformOS version. Metrocluster for Linux uses CLI for array communication. Each Metrocluster package needs at least one CLI session. Please refer to your 3PAR array documentation for maximum supported CLI sessions. Ensure that sufficient CLI sessions will be available for Metrocluster packages during failover. Refer to the sections Managing CLI Connections to 3PAR array in the manual for more information. 6. When using 3PAR Inform CLI Version 3.1.2, there may be a considerable increase in the failover times of the Metrocluster packages. This is owing to a known faulty behavior during client connections with 3PAR OS Inform CLI version 3.1.2. This issue has been fixed in 3PAR OS Inform CLI version 3.1.3. Customers are advised to move to 3PAR OS Inform CLI version 3.1.3. 13
Metrocluster with 3PAR Remote Copy Version Software on Linux Server SG Version 3PAR Platform & Firmware 1,5 Feature(s) B.01.00.10 (May 13) Documentation for this product version: www.hpe.com/info/linuxserviceguard-docs RH5:SGLX_00449 RH6:SGLX_00450 SLES11:SGLX_004 51 RHEL 5.7 RHEL 5.8 RHEL 5.9 RHEL 5.10 RHEL 6.1 RHEL 6.2 RHEL 6.3 RHEL 6.4 RHEL 6.5 SLES11SP 1 SLES11SP 2 SLES11SP 3 HP 3PAR Inform OS CLI 2 SG/LX A.11.20.2 0 3PARF200/F400: 3PAR Inform OS version 2.3.1 mu2 3 and future 3PAR Inform OS version 3.2.1, 3.1.1, 3.1.2 6, 3.1.3 and 3PART400/T800: 3PAR Inform OS version 2.3.1 mu2 3 and future 3PAR Inform OSversion 3.2.1, 3.1.1, 3.1.2 6, 3.1.3 and Supported features in this version: 1. Synchronous Replication mode 2. Fully Provisioned and Thinly Provisioned Virtual Volumes 3. Remote Copy configurations 4. 3PARVirtual Domains 5. Serviceguard package failover policies site_preferred and site_preferred_manual (Available with SG/LX A.11.20.10 or later) 6. LVM 7. Support for Asynchronous Periodic Replication mode 8. DeviceMapper multipathing 9. N-1 or 1-N Remote Copy Configuration with below mentioned condition: In a N-1 or 1-N Remote Copy topology, 3PAR allows only one of the pairs to be bi-directional, rest of the pairs will be unidirectional. 3Par recommends not to use the unidirectional pairs for Disaster Recovery. So, one can configure Metrocluster or Continentalclusters only between the arrays that are in a bi directional configuration within a N- 1 or 1-N Remote Copy setup. 10. Support for VMWare virtual machines as Metrocluster nodes 11. Persistent reservations support with device mapper multipathing 12. Cluster Verification support
3PARP10000: 3PARInfor m OS version 3.2.1, 3.1.1, 3.1.2 6, 3.1.3 And 3PARStoreServ7000 3PAR Inform OS version3.2.1, 3.1.2 6, 3.1.3 and 4 HP Metrocluster 3PAR package will have impact if the HP 3PAR storage system is upgraded to any of the following 3PAR OS versions 2.3.1 MU5 Patch35 or later 3.1.1 MU3 Patch27 or later 3.1.2 MU3 Patch16 or later Upon completion of upgrade, it is recommended to get the certificate file or certificate exception file saved in the default location. HP Metrocluster for 3PAR supports only the default location of the certificate or certificate exception file. It is recommended to follow respective HP 3PAR OS software upgrade instructions guide to upgrade your storage system and CLI upgrade The following features are not supported with Metrocluster with 3PAR Remote Copy B.01.00.10: 1. Support for Synchronous Long Distance configuration 2. Support for Unidirectional Remote Copy configuration 3. 3PAR Remote Copy volume groups configuredwith fail_wrt_on_err policy. 4. Easy Deployment of Metrocluster Packages using Serviceguard Manager 5. cmdrprevcommand 6. cmpreparestg command over 3PAR Remote Copy Volume Groupdisks 7. RHEL 6 KVM Guest as Serviceguard Metrocluster Node 15
B.01.00.00 (December 12) Documentation for this product version: www.hpe.com/info/linuxserviceguard-docs RHEL 5.7 RHEL 5.8 RHEL 6.1 RHEL 6.2 RHEL 6.3 SLES11SP 1 SLES11SP 2 HP 3PAR Inform OS CLI 2 SG/LX A.11.20.0 0 SG/LX A.11.20.1 0 3PARF200/F400: 3PAR Inform OS version 2.3.1 mu2 3 and future 3PAR Inform OS version 3.2.1, 3.1.1, 3.1.2 6, 3.1.3 and 3PART400/T800: Supported features in this version: 1. Synchronous Replication mode 2. Fully Provisioned and Thinly Provisioned Virtual Volumes 3. Remote Copy configurations 4. 3PARVirtual Domains 5. Serviceguard package failover policies site_preferred and site_preferred_manual (Available with SG/LX A.11.20.10 or later) 6. LVM 7. Support for Asynchronous Periodic Replication mode 8. PersistentReservations (PR) 9. Device Mapper Multipathing 10. N-1 or 1-N Remote Copy Configuration with below mentioned condition: 3PAR Inform OS version 2.3.1 mu2 3 and future 3PAR Inform OS Version 3.2.1, 3.1.1, 3. 1. 2 6, 3.1.3 and In a N-1 or 1-N Remote Copy topology, 3PAR allows only one of the pairs to be bi-directional, rest of the pairs will be unidirectional. 3Par recommends not to use the uni-directional pairs for Disaster Recovery. So, one can configure Metrocluster or Continentalclusters only between the arrays that are in a bi directional configuration within a N-1 or 1-N Remote Copy setup. 3PAR P10000: 3PAR Inform OS version 3.2.1, 3.1.1, 3.1.2 6, 3.1.3 and 3PAR StoreServ700 0 3PAR Inform OS version 3.2.1, 3.1.2 6 up to 3.1.3 and
4 HP Metrocluster 3PAR package will have impact if the HP 3PAR storage system is upgraded to any of the following 3PAR OS versions 2.3.1 MU5 Patch35 or later 3.1.1 MU3 Patch27 or later 3.1.2 MU3 Patch16 or later Upon completion of upgrade, it is recommended to get the certificate file or certificate exception file saved in the default location. HP Metrocluster for 3PAR supports only the default location of the certificate or certificate exception file. It is recommended to follow respective HP 3PAR OS software upgrade instructions guide to upgrade your storage system and CLI upgrade The following features are not supported with Metrocluster with 3PAR Remote Copy B.01.00: 1. Support for Synchronous Long Distance configuration 2. Support for Unidirectional Remote Copy configuration 3. 3PAR Remote Copy volume groups configured with fail_wrt_on_err policy. 4. Persistent reservations with device mapper multipathing 5. Support for VMWare virtual machines as Metrocluster nodes 6. Easy Deployment of Metrocluster Packages using Serviceguard Manager 7. Cmdprev command 8. cmpreparestg command over 3PAR Remote Copy Volume Group disks 17
1. This table represents what has been certified and is supported. If other storage, firmware or software versions are available but not indicated in this table, it is currently not supported by Metrocluster with 3PAR Remote Copy. The table will be updated when new versions are certified. 2. Refer to 3PAR documentation to get information on supported versions of HP 3PAR Inform OS CLI on respective Operating Systems. 3. Note: mu refers to update. 4. Note: HP Metrocluster 3PAR package will have impact if the HP 3PAR storage system is upgraded to any of the following 3PAR OS versions 2.3.1 MU5 Patch35 3.1.1 MU3 Patch27 MU3 Patch16 Please refer the respective release notes for more details. 5. Note: 3PAR arrays allow a maximum 64 to 256 CLI connections based on array model and InformOS version. Metrocluster for Linux uses CLI for array communication. Each Metrocluster package needs at least one CLI session. Please refer to your 3PAR array documentation for maximum supported CLI sessions. Ensure that sufficient CLI sessions will be available for Metrocluster packages during failover. Refer to the sections Managing CLI Connections to 3PAR array in the manual for more information. 6. When using 3PAR Inform CLI Version 3.1.2, there may be a considerable increase in the failover times of the Metrocluster packages. This is owing to a known faulty behavior during client connections with 3PAR OS Inform CLI version 3.1.2. This issue has been fixed in 3PAR OS Inform CLI version 3.1.3. Customers are advised to move to 3PAR OS Inform CLI version 3.1.3.
Revision History Date Page Count Details of Change VersionNumber August 16 th, 2011 3 Pages First Draft 1.0 October4 th, 2011 3 Pages Added support for P10000 series and InformOS 3.1.1 1.1 March 20 th 2012 3 Pages Added support for vpars 6.0, HP vpar and Integrity VM v6.1andsadtaconfigurations 1.2 June 25 th 2012 3 Pages Clarification provided on type of support provided on Integrity Virtual Machines 1.3 November 5 th 2012 4 Pages Added support for HP vpar and Integrity VM v6.1.5 1.4 December 13 th 2012 6 Pages Added Linux support matrix 1.5 February 4 th, 2013 7 Pages Added support for StoreServ 7000 and 1-N & N-1 Support with conditions 2.0 April 15, 2013 7 Pages Added support InForm 3.1.2 on all 3PAR arrays 2.1 May 13, 2013 8 Pages Added new patch update release A.01.00.10 on Linux platform, support for VMware and DR support on Devicemapper 2.2 Dec 20, 2013 9 Pages Added section that describes action to be taken when upgrading to selected HP 3PAR 2.3 InForm OS Mar 14, 2014 11 Pages B.12.00.00 Updates 3.0 June 17, 2015 13 Pages Removed restriction on numberof packages supported and made it as configuration 3.5 guideline August, 2015 16 Pages B.12.00.30 3.6 October 26, 2015 16 Pages Added support for 3PAR OS Inform version 3.2.2 3.7 December 11, 2015 15 Pages Warning for 3PAR OS Inform Version 3.1.2 3.8 February 16, 2016 18 Pages 3PAR Peer Persistence Support condition(only with VMware), correction with page numbers (Bumped from 15 to 18) April18, 2016 18 Pages Support for 3PAR 8K and 20K Series with HP-UX, patch PHSS_44455, Removed note that says CVM/CFS not supported for 3PAR 7K on HP-UX and instead added foot note 10. 3.9 3.10 June 15, 2016 19 Pages Metrocluster for Linux with 3PAR Remote Copy B.12.00.50 with Serviceguard for Linux Enterprise Aug 1, 2016 Edition A.12.00.50, 3PAR PP support for Physical Machines 19 Pages Support for 3PAR Peer Persistence on physical machines 3.12 3.11 Oct 25, 2016 19 Pages Support for Smart Quorum & Asymmetric nodes across sites on HP-UX 3.13 Nov 25, 2016 20 Pages Support for RHEL7.3 and SLES12 SP2 3.14 19
For more information To read more about HPE Serviceguard Metrocluster product, go to: www.hpe.com/info/linux-serviceguard-docs and www.hpe.com/info/hpux-serviceguard-docs Call to action Please contact your HPE representative or visit: www.hpe.com/servers/sglx and www.hpe.com/info/hpux-serviceguard Get connected www.hpe.com/info/getconnected Current HP driver, support, and security alerts delivered directly to your desktop Copyright 2016 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Trademark acknowledgments, if needed. 4AA4-xxxxENN, Aug 2016