Em-ITX Series VIA EITX-3002 Em-ITX Eden X2/Nano X2 E Board with VGA,HDMI, LVDS, COM, GigaLAN, USB 2.0 and Built-in DC Power Features VIA Eden X2 and Nano X2 E (2 MB L2 Cache) Em-ITX form factor: 17 cm (W) x 12 cm (L) Dual-sided multiple I/O connector coastlines Em-IO expansion bus socket Integrated VIA Chrome 9 HD DX9 3D/2D video processor with MPEG-2, WMV9/VC1, H.264 video decoding acceleration Two Gigabit Ethernet Supports one HDMI port, one VGA port and one 24-bit single channel LVDS Two RS-232 and two RS- 232/422/485 Onboard six USB 2.0 ports Supports Android 2.2 Board Placement 2 x RS-232/422/485 Power LED & HDD LED Parallel port Em-IO expansion bus DDR3 1066 SDRAM SODIMM 8-bit Digital IO 2 X RS-232 24-bit single-channel LVDS HD Audio CRT/VGA HDMI Power input, 2-pole Phoenix connector, accepts DC 7V~36V Power on/off button SATA Touch panel connector 2 x GbE RJ-45 Processor Processor 1.0GHz VIA Eden X2 1.2GHz VIA Nano X2 E System Front Side Bus 800 MHz 1066 MHz Speed L2 Cache 2 MB 2 MB Chipset VIA VX900H Media System Processor chipset BIOS AMI BIOS, 8 MBit SPI Flash BIOS System Power Management Timers Power on ACPI supported Memory Technology 1 x DDR3 1066 204-pin SDRAM SODIMM socket Max. Capacity Up to 4GB memory size Graphic Controller Integrated VIA Chrome 9 HD DX9 3D/2D video processor with MPEG-2, WMV9/VC1, H.264 video decoding acceleration Display Memory Optimized Unified Memory Architecture (UMA) Supports up to 512 MB frame buffer using system memory CRT Onboard 1 x VGA connector Supports pixel resolution up to 2560 x 1600 LVDS Supports 1 x 24-bit single-channel LVDS interface with inverter control signals by an onboard 2 x 15-pin wafer box connector as LVDS1, panel resolution up to WXGA (1366 x 768) Onboard 5V/3.3V LCD power switch (default at 3.3V) HDMI VX900H integrated and multiplexed HDMI interface Onboard 1 x single-link HDMI connector with flange Dual Independent Two independent display engines built-in VX900H chipset, supports Display CRT+LVDS, CRT+HDMI, LVDS+HDMI at different resolutions, pixel depths, and refresh rates with completely two different video contents Ethernet Controller 2 x Onboard VIA VT6130G Gigabit Ethernet controllers Supports two RJ-45 connectors Supports Wake on LAN (WOL) Supports Preboot Execution Environment (PXE) HD Audio Controller VIA VT2021 HD Audio Codec TI TPA1517 6W stereo audio power amplifier Onboard Line-in, Speaker-out, Mic-in pin-headers USB 2.0 Controller Integrated USB 2.0 host controller built-in VX900H IGP chipset Supports 6 x USB 2.0 host ports, which consist of 2 x USB ports (mini-din Type A connectors) 4 x USB ports (pin headers with individual VCC power)
Front I/O Coastline Rear I/O Coastline Power input connector, accepts DC 7V~36V USB 2.0 host ports Power/HDD LED indicators CRT/VGA HDMI Power on/off button SATA II 3 Gbps COM 2 COM 1 CFast socket RJ-45 RJ-45 Serial Ports Controller Onboard Fintek F81865 LPC I/O controller Supports 4 COM ports, which consist of 2 x RS-232/422/485 by 2 x DB-9 connectors of COM 1 and COM 2, configurable via BIOS setup Supports RS-485 AutoFlow Control functions of COM 1 and COM 2 2 x RS-232 by pin-headers of COM 3 and COM 4 Supports COM port 5V/12V power selector for COM 1 ~ COM 4 Digital I/O General Purpose I/O Supports 8-bit GPIO with DC 5V and DC 12V power source by a 2 x 6-pin header Resistive Touch Controller EETI ETP-CP-S5XU resistive touch panel controller 1 x 5-wire/4-wire resistive touch sensor interface by a 2 x 3-pin header Storage Serial ATA 1 x Onboard SATA II port, maximum data transfer rate up to 300MB/s Onboard SATA power connector output 5V and 12V support 2.5" SATA hard disk drives Compact Flash 1 x CFast socket onboard, support Type I/II of CFast storage disk H/W Monitoring Temperature Sensor Built-in one thermal sensor by onboard 1 x 3-pin header System Indicator Power Status LED 1 x Green color LED HDD Activity LED 1 x Red color LED Watchdog Timer Output System reset Interval Programmable 1~255 sec System Expansion Em-IO Bus Expansion Built-in onboard Em-IO bus expansion interface, supports expansion interface signals 1 of PCIe x 8, LPC, SMBus, GPIO, DVP display interface, VCC power signals of 3.3V, 5V, 12V, and ACPI 3.0 Connectors Front I/O Coastline 1 x HDD & PWR LED 2 x RS-232/422/485 as COM 1 and COM 2 2 x USB 2.0 mini-din connectors 1 x 2-pole of Phoenix power input connector 1 x ATX power on/off button Rear I/O Coastline 1 x VGA connector 1 x Single-link HDMI connector with flange 1x CFast socket 2 x Gigabit Ethernet connectors Pin-headers Pin-headers 4 of USB 2.0 pots by 2 of 2 x 5-pin headers, with individual VCC power support 4 of 5V/12V voltage selectors for COM 1 ~ COM 4 by 4 of 1 x 3-pin headers 1 of signal channel 24-bit LVDS interface by a 2 x 15-pin box header 1 of 1 x 3-pin headers for LCD power 3.3V/5V selection 1 of 1 x 3-pin headers for selecting the AT or ATX mode 1 of 2-pin headers reserved for external ATX power on/off control 1 of 7-pin SATA data connector 1 of 4-pin SATA power pin headers support both 5V /12V SATA power 1 of 3-pin header for thermal sensor 1 of 2 x 5-pin header for Speaker-out, Line-In and Mic-In 1 of 2 x 6-pin header support 8-bit Digital IO with 5V DC and 12V DC power source 1 of parallel port by a 2 x 13-pin header onboard 1 of 5-wire/4-wire resistive touch sensor interface by a 2 x 3-pin header 1 of reserved 3-pin 12V power connector for system fan control
Power Supply Power Consumption Typical 24.86W Typical 27.67W Input Voltage Built-in onboard DC-to-DC converter Accepts wide range of Power Input of DC 7V ~ 36V Supports AT and ATX mode Power Input Connector 1 x 2-pole Phoenix connector AT/ATX Selector Onboard AT/ATX mode switch by a 1 x 3-pin headers, Default support ATX mode Fuse Rating 7A / 125V Heatsink Construction Aluminum Alloy Dimensions (WxHxD) 250.2 mm (W) x 36 mm (H) x 123.6 mm (D) (9.85" x 1.41" x 4.86") Physical Form Factor Em-ITX Characteristics Board Dimension 17 cm (W) x 12 cm (L) (6.69" x 4.72") Weight 1 Kg (net weight of board plus heatsink only) Environmental Specification Operating Temperature -10 C up to 65 C for EITX-3002-1D10A1/2D10A1-10 C up to 55 C for EITX-3002-1D12A1/2D12A1 Storage Temperature -20 C ~ 70 C Operating Humidity 10% ~ 90%, relative humidity, non-condensing Software Compatibility Operation System Microsoft Windows XP, Windows 7, Windows XP Embedded, Windows Embedded Standard 7, Debian Linux Em-ITX I/O Cards EMIO-3210 Em-IO Card with 6 COM Ports and 2 Parallel Ports Requires special heatsink EMIO-3450 Em-IO Card with 2 Mini-PCIe Slots, 1 SIM Slot, GPS, WWAN, Wireless LAN Applications: Kiosk, factory automation Application: Vehicle, fleet management, logistic control Ordering Information System Built-in CPU EITX-3002-1D10A1 1.0GHz VIA Eden X2 1.0GHz Eden X2 CPU Based Fanless Em-ITX Board, with 1 x VGA, 1 x HDMI, 1 x LVDS, 2 x RS-232/422/485, 2 x RS-232, 8-bit Digital I/O, 6 x USB 2.0, 2 x GigaLAN, 1 x SATA II, 1 x CFast socket, DC-in 7~36V, EmIO AT/ ATX mode selectable EITX-3002-1D12A1 1.2GHz VIA Nano X2 E 1.2GHz Nano X2 E CPU Based Fanless Em-ITX Board, with 1 x VGA, 1 x HDMI, 1 x LVDS, 2 x RS- 232/422/485, 2 x RS-232, 8-bit Digital I/O, 6 x USB 2.0, 2 x GigaLAN, 1 x SATA II, 1 x CFast socket, DC-in 7~36V, EmIO AT/ATX mode selectable EITX-3002-2D10A1 1.0GHz VIA Eden X2 EITX-3002-1D10A1 with Full Cable Kit EITX-3002-2D12A1 1.2GHz VIA Nano X2 E EITX-3002-1D12A1 with Full Cable Kit
Optional Accessories *Note: The optional accessories may have minimum ordering quantity limitation. Please contact VIA Sales representative for more details. Function I/O Cable 99G33-100119 Dual USB 2.0 cable 99G33-191256 Touch sensor interface cable 99G33-050033 Print port cable 99G33-080185 Digital IO cable 99G33-080127 1-port COM port cable 99G30-09032B 3-port Audio Jack (3 x 3.5Ø) cable 99G33-290010 Thermal sensor cable 99G33-300011 HDMI to DVI cable External AC-to-DC Adapter and Power Cable 99G63-020246 AC-to-DC adapter, DC 19V/90W with 2-pole Phoenix Plug 99G33-02032C Power cord, 180 cm, USA type 99G33-02033C Power cord, 180 cm, Europe type 99G33-02034C Power cord with PSE mark, 180cm for Japan Wireless USB Module EMIO-1530-00A1 EMIO-1530-10A1 802.11 b/g Wireless LAN USB module for USA 802.11 b/g Wireless LAN USB module for Europe
Block Diagram Packing List DC IN(7~36V) SYSTEM POWER CRT VIA Eden X2 1.0G VIA Nano X2 E 1.2G V4 BUS CPU VCORE ISL6261 VID[6:0] +/- CPU_CLK Clock Generator +/- HCLK ICS9UM709 DDRIII SO-DIMM Items for EITX-3002-1D10A1/ 1D12A1 1 x EITX-3002 board 1 x SATA power cable 1 x Power cable, 2-pole Phoenix plug to DC-plug 1 x Screw pack of 7 pieces of Nickel- Plated Round Head M3*20mm screw 1x 2-port USB 2.0 cable 1 CHANNL LVDS (24 bits) SATAII AUDIO AMP(6W) Dimensions HDMI PORT GIGA LAN VT6130 X2 VL801 EMIO HDA VT1828S PCIE BUS HDA I/F VX900H USB BUS LPC BUS CFast USB 2.0 PORT X 6 Touch Panel SPI Flah ROM SIO F81865F LPT / DIO RS232/422/485 X2 RS232 X2 Item for EITX-3002-2D10A1/2D12A1 1 x EITX-3002 board 1 x SATA data cable 1 x SATA power cable 1 x Power cable, 2 pole Phoenix plug to DC-plug 1 x Screw pack of 7 pieces of Nickel- Plated Round Head M3*20mm screw 2 x 2-port USB 2.0 cables 1 x Touch sensor cable 1 x Digital IO cable 1 x 2-port COM port cable 1 x 3-port Audio Jack (3 x 3.5Ø) cable 1 x Thermal sensor cable 1 x Print port cable 250.15 86 16.35 236.15 160 160 100 51.62 123.6 110 82.2 105 110 100 37.5 52.5 36 58.38 Unit: mm * All product specifications are subject to change without notice. Update: Jun. 21, 2013. www.viaembedded.com