Date: Quantity: Company: Project: offers even color with a wide beam angle of 0 degrees. Its slim profile and plug and play TX Connect system ensure high design flexibility. With auto-addressing ON/OFF function, this fixture maximizes the number of products that can be controlled within a standard DMX universe. INDOOR Product Specifications Light Source Color Range Color Resolution Beam Angle 0 Luminous Flux Efficacy Lumen Maintenance Cover Lens High intensity SMT LEDs 6.7 million additive RGB color -bit (Gamma correction) 8 lm lm/w L70 @5 C - 50,000hrs Transparent PC LED Pitch.5mm / 0.96 Housing Adjustment Options Dimensions (L x W x H) Weight Regulatory Listing & Safety Approval Operating Temperature Beige ABS backcase 80 swing angle 95 x.7 x 5mm.6 x.76 x.8 0.kg / 0.lbs CE, FCC, cetlus 0 C to +0 C / F to +0 F Storage Temperature Environment Humidity 0 C to +70 C / F to +58 F Indoor 0~90%, non-condensing Electrical Specifications Input Voltage V DC Power Consumption 6W max. System Specifications Power / Data Interface TX Connect Smart Control DMX5, channels per pixel Power Supply LED Engine Smart 00W Indoor Addressing Options Auto Addressing ON/OFF LED CHARACTERISTICS Because LEDs are semiconductor devices, their performances are subject to inherent variability commonly found in semiconductor industry. To improve consistency in performance across the same product, LED manufacturers sort LEDs into bins according to different preset parameters, such as forward driving voltage, illumination, etc. Whereas binning is a sorting function, it is not a correction process. Inherent variability in the manufacturing process results always in different binning distributions according to different production lots. Traxon uses automatically binned LEDs on its products, thereby minimizing output variations within the model range. As with all electronic devices, LED output degrades over time a term called lumen depreciation. This also explains why it is nearly impossible to expect photometric performances of two LED products with different service life spans to be the same. The rate of LED degrade is a complicate function of many factors such as operating efficiency, duration of continuous operation, and more significantly, environmental conditions (ambient temperature for example). If allowed working under optimal operating temperature range and with good ventilation, LED devices enjoy long service lives over conventional light sources. When using/installing LED devices, care should be taken to ensure that the devices will operate within the operating conditions specified in respective product literature. Lumen measurement compiles with LM-79-08 standard. Lumen maintenance is calculated based on LM-80 compliant measurement. Product Specification 0/6 V.9 of 6
Photometrics Candela Distribution Light Output Cd: 0 5.09 0.8 5.8 90 75 60 Color Luminous Flux (lumens) Power (Watts) Efficacy (lm/w) White 8.90.7.7 Red 6.09.9 7.5 Green 50..89 6.6 Blue 9.5.08 8.56 0.7 6.6 0 5 0 5 Illuminance Distance 0cm/.9 5cm/9.8 50cm/9.7 7cm/9.5 00cm/9. Lux 0 8 5 0 50% lmax (diameter) 9cm/. 7cm/ 8. 5cm/ 57. 7cm/ 85. 90cm/. Illuminance at a Distance.5.5.75.5.5.0m m ISO-Illuminance Unit: [lx].5.5.75.0m 5.75.5.5.75.5.5.75.5.5.5.5.75.5.5.75.5.7 0.5m 0.5.75.5 0.5m.5 5.5.75.5.5.75.5 5.0m.0m m.0m 0.5m 0 0.5m.0m m.0m.5.75.5.5.5.0m m Coordinate Scale: d/h Height:.5 m Photometric measurements are carried out by an independent laboratory. IES and LDT files are available for download from the Traxon website. Product Specification 0/6 V.9 of 6
Dimensions.65mm/. 7.mm/..7mm/.8 5mm/. 7.8mm/6.8 FRONT 6.8mm/0.7 95mm/.6 80 TOP 5mm/. 0mm/5.5 5.8mm/. BOTTOM Auto-Addressing Configuration: OFF: Auto Addressing OFF ON: Auto Addressing ON(Default) Product Specification 0/6 V.9 of 6
Mounting Mounting with Base Bracket BH ST Screw x 0 7.8mm/6.8 6.8mm/0.7.5mm/0. 56mm/6. 0mm/5.5 Mount base bracket using screws and push unit onto the bracket rod. Ø7mm/0. 0mm/0.8 Ø.5mm/0. 0mm/.6 Base bracket dimensions (Bottom view) Adjust to desired angle and lock unit using the provided hex key. Do not over-tighten. Alternative Mounting Method Push the unit onto the rod. Ø6.5mm/0.5 Adjust to desired angle and lock unit using the provided hex key. Do not over-tighten. Mounting Accessories X BH ST x0 Screw Product Specification 0/6 V.9 of 6
System Diagram Butler S Butler S CONTROLLER Product Specification 0/6 V.9 5 of 6
Ordering Fixtures MB.CL.50000 A666055 Standard Accessories (included in delivery) TI.IC.000000 TX CONNECT Smart Indoor Interconnection Cable, cm/7" AA8900055 N/A x Cove Light Mounting Kit (x Screws, x mm Hex Key) N/A TX Control EN.BU.000000 Butler S AB6000 TX Connect TI.ZI.000000 TX CONNECT Smart Power/Data Injector Box A708600J TI.DO.000000 TX CONNECT Smart Data Extractor Box A70800J TI.EC.0050000 TX CONNECT Smart Indoor Extension Cable, 0.5m/.6ft AA55650055 TI.EC.000000 TX CONNECT Smart Indoor Extension Cable, m/.8ft A60055 TI.EC.000000 TX CONNECT Smart Indoor Extension Cable, m/9.8ft A60055 TI.EC.0500000 TX CONNECT Smart Indoor Extension Cable, 5m/6.ft AA5800055 TI.EC.000000 TX CONNECT Smart Indoor Extension Cable, 0m/.8ft A6680055 DI.IC.000000 TX CONNECT Data Cable, m/.8ft AA5560055 TX Power PS.IA.000000 LED Engine Smart 00W Indoor AA6090055 PS.AC.000000 AC Power Cord, m/6.6ft (EU) AA55860055 PS.AC.000000 AC Power Cord, m/6.6ft (US) AA55690055 PS.AC.000000 AC Power Cord, m/6.6ft (UK) AA5560055 PS.AC.000000 AC Power Cord, m/6.6ft (AU) AA5560055 Product Specification 0/6 V.9 6 of 6