Leapfrog Geo 3.1
Flexible modelling from point data Leapfrog Geo 3.1 introduces new workflows for modelling using point data. A 3D selection tool allows simple, fast in-scene categorisation of millions of imported points. Use query filters and model evaluations to quickly identify points of interest and re-categorise these using the new 3D selection tool. Once points have been correctly categorised, the new guide points workflow sets up points for use in dynamic implicit surfaces. This new functionality improves many common workflows, including: Modelling from blasthole centroid data Import blasthole measurements into the Points folder and fix errors/re-categorise with the 3D point selection tool. Generate guide points from the points then add these to a surface in a Leapfrog model or use the guide points to build a new surface. Modelling from blasthole drillhole data Blastholes can be imported as short drillholes, usually with a single interval. This is an improvement on modelling them with the intrusion values workflow, which often produced surfaces that stepped around each blasthole due to the nature of intrusion value point spacing. Now, surfaces can be generated from the blasthole mid-point as opposed to the entire interval. Simply create interval midpoints from the blasthole intervals, then build guide points from these using the lithology/category column. The guide points can then be used in the same way as intrusion values. Categorise points and collars in the scene Select and assign points and collars into categories in Leapfrog s powerful 3D environment. Points can be selected in-scene and then assigned to a new category. Once saved, the new category column can be used in the same way as imported category information.
Guide points Guide points can now be created from category data in the project and added to surfaces. Category data that can be used to create guide points includes: Downhole category data Category data on imported points Interval midpoints Guide points are classified into Interior or Exterior, and each guide point is assigned a distance value that is the distance to the nearest point on the opposite side. LAS import for drillhole point measurements LAS 1.2 and 2 drillhole logs can now be imported into Leapfrog. This import workflow can handle multiple LAS files, and will convert them into a single drillhole points table. Imported LAS files can be viewed in 3D as a single object, and columns of data common across all LAS files can easily be used as input into a
Leapfrog numeric interpolant. Query filters are automatically created on import for each of the original LAS files, making it easy to see each of the individual files. LAS files are ideal data to view in the new drillhole Correlation tool introduced in Leapfrog 3.0. This tool lets you view category and numeric drillhole data in a simple and intuitive 2D interface. New interpretation tables can be made based on the correlations visible across all your data. Now LAS data such as downhole geophysics can easily be imported and can play a part in this interpretation. Extended multicore processing In 2014, Leapfrog introduced the ability to use up to 4 cores when processing. Leapfrog Geo 3.1 increases this capability to 8 cores. Those with high end computers with 8-core processors can now access all of their computer s power to significantly reduce processing times when tackling complex modelling problems. Reloading ESRI Geodatabases Imported GIS data from ESRI Geodatabases can be reloaded. ESRI Geodatabase and MapInfo batch files are now organised as a collection of objects in the project tree.
System requirements Operating system 1, 2 Supported Microsoft Windows 7 32bit (SP1) Microsoft Windows 7 64bit (SP1) Microsoft Windows 8 32bit Microsoft Windows 8 64bit Microsoft Windows 8.1 32bit Microsoft Windows 8.1 64bit Microsoft Windows 10 32bit Microsoft Windows 10 64bit Recommended System memory 4GB (minimum) 16GB RAM Free hard disk Legacy spinning hard disk 128 GB capacity Microsoft Windows 7 64bit (SP1) Microsoft Windows 8.1 64bit Microsoft Windows 10 64bit Solid state disk drive 512 GB capacity Display resolution 1280 x 720 (minimum) 1920 x 1080 (HD) or better Graphics8 Nvidia TM (Desktop hardware) GeForce 500 series3 GeForce 600 series3 GeForce 700 series3 Quadro 600 to Quadro 70003 Quadro K series3 GeForce GTX 550Ti7 GeForce GTX 650Ti7 GeForce GTX 7507 Quadro 50007 Quadro K20007 Nvidia TM (Mobile hardware) GeForce 500M series3 GeForce 600M series3 GeForce 700M series3 GeForce 800M series3 Quadro M series3 Quadro K500M to Quadro K5000M3 Quadro K510M to Quadro K5100M3 AMD TM / ATI TM (Desktop hardware) Radeon HD 6000 series3 Radeon HD 7000 series3 Radeon HD 8000 series3 Radeon R5 series3 Radeon R7 series3 Radeon R9 series3 Firepro V series3 Firepro W series3 AMD TM / ATI TM (Mobile hardware) Radeon HD 6000 series 3 Radeon HD 7000 series 3 Radeon HD 8000 series 3 FirePro M2000 3 FirePro M4000 3 FirePro M6000 3 FirePro M4100 3 FirePro M5100 3 FirePro M6100 3 FirePro M8900 3 GeForce GTX 560M7 GeForce GT 650M7 GeForce GT 735M7 GeForce 840M7 Quadro 4000M7 Quadro K3000M7 Quadro K2100M7 Radeon HD 65707 Radeon HD 77307 Radeon HD 86707 Radeon R7 2507 Radeon R9 2707 Firepro V39007 Firepro W50007 Radeon HD 6730M 7 Radeon HD 7690M 7 Radeon HD 8770M 7 FirePro M4000 7 FirePro M6000 7 FirePro M5100 7 FirePro M6100 7 FirePro M8900 7 Intel TM Integrated Graphics Intel HD Graphics 20004 Intel HD Graphics 30004 Intel HD Graphics 25005 Intel HD Graphics 40005 Intel HD Graphics 42006 Intel HD Graphics 44006 Intel HD Graphics 46006 Intel HD Graphics 50006 Intel HD Graphics 51006 Intel HD Graphics 52006 Notes: 1 Running Leapfrog in virtualised environment is not supported 2 Running Leapfrog via a remote desktop connection or other remote login system is not supported 3 Hardware configuration must include 512MB Video RAM or greater 4 Must be 2nd generation Intel Core TM i3, i5 or i7 CPU with 512MB Video RAM or greater 5 Must be 3rd generation Intel Core TM i3, i5 or i7 CPU with 512MB Video RAM or greater 6 Must be 4th generation Intel Core TM i3, i5 or i7 CPU with 512MB Video RAM or greater 7 Models with peak processing power greater than 600GFLOPS are recommended 8 Touch-screen hardware is not supported