1000N central tube cable w 2 2 fibres, glass elements and black FireBur sheath, VDE UDQ(ZN)BH Application and installation This cable can be used for LAN and WAN backbones, telecom access lines, fibre to business and fibre to the building drop connections as well as fibre to the home drop and access connections. With its FireBur LSHF sheathing this cable is ideal for mixed indoor and outdoor installation. It is equally suited for installation in ducts and on trays. Standards ISO 11801 2 nd edition, EN 501731:2002, IEC 0791 Flame resistance IEC 033212, IEC 0751, IEC 0752, IEC 1032 Construction Loose tube Ø2.8 mm jelly filled loose tube with 2 1 fibres; Ø3.5 mm loose tube with 2 fibres Fibre colour code 1 Red 13 Yellow w/mark every 70 mm 2 Green 3 Blue Yellow 5 White Grey 7 Brown 8 Violet 9 Turquoise 10 Black 11 Orange 12 Pink 1 White w/mark every 70 mm 15 Grey w/mark every 70 mm 1 Turquoise w/mark every 70 mm 17 Orange w/mark every 70 mm 18 Pink w/mark every 70 mm 19 Yellow w/mark every 35 mm 20 White w/mark every 35 mm 21 Grey w/mark every 35 mm 22 Turquoise w/mark every 35 mm 23 Orange w/mark every 35 mm 2 Pink w/mark every 35 mm 1 of 3
Strength member Waterblocked EGlass fibre elements Sheath 1.0 mm black FireBur sheath, UV stabilised, IEC 50290227 Sheath marking Draka I/O CT LSHF 1.0 kn <Fibre count> <Fibre type><fibre brand><item No>05<Batch Number><Meter mark> UDQ(ZN)BH <Fibre count> <Fibre family> <Mode field diameter> /125 <Transmission Class> Physical properties Nominal outer diameter Nominal weight Maximum installation tensile strength Short term tensile strength Permanent tensile strength Compressive strength (crush) Impact IEC 07912 Method E3 E Limits 2 1 fibres:.0 mm 18 2 fibres:.5 mm 2 1 fibres: 0 kg/km 18 2 fibres: 5 kg/km 1000 N (fibre strain less than 1/2 of proof test level) 750 N (fibre strain less than 1/3 of proof test level) 500 N (no attenuation change, fibre strain less than 1/ of proof test level) 1500 N 15 Nm (no attenuation change, no broken cable elements) Torsion Kink Min. bending radius, unloaded Min. bending radius, loaded Temperature range Water penetration E7 0 1 F1 F5B 5 cycles ± 1 turn The cables do not form a kink when a loop is drawn together to a diameter of 100 mm R = 0 mm R = 100 mm Storage: 0 C to +0 C Installation: 30 C to +0 C Operation: 30 C to +0 C. No water on free end Heat of combustion 21 fibres: 30 MJ/km = 0.18 kwh/m 2 fibres: 800 MJ/km = 0.22 kwh/km Product codes ordering information Prysmian Prysmian Group Draka Fibre Fibre type Fibre group material description Material count data material code sheet code 0019958 DR I/O CT LSHF 1.0kN OM2B BK DR I/O CT LSHF 1.0kN OM2B BK DR I/O CT LSHF 1.0kN 8 OM2B BK DR I/O CT LSHF 1.0kN 12 OM2B BK DR I/O CT LSHF 1.0kN 2 OM2B BK 8 12 2 MaxCapBBOM2 50/125 multi mode MaxCapBBOM2 50/125 multi mode MaxCapBBOM2 50/125 multi mode MaxCapBBOM2 50/125 multi mode MaxCapBBOM2 50/125 multi mode C3 C3 C3 C3 C3 001990 DR I/O CT LSHF 1.0kN OM3B BK DR I/O CT LSHF 1.0kN OM3B BK MaxCapBBOM3 50/125 multi mode MaxCapBBOM3 50/125 multi mode C31 C31 001991 DR I/O CT LSHF 1.0kN 8 OM3B BK 8 MaxCapBBOM3 50/125 multi mode C31 001992 DR I/O CT LSHF 1.0kN 12 OM3B BK 12 MaxCapBBOM3 50/125 multi mode C31 001993 DR I/O CT LSHF 1.0kN 2 OM3B BK 2 MaxCapBBOM3 50/125 multi mode C31 0032535 DR I/O CT LSHF 1.0kN OMB BK DR I/O CT LSHF 1.0kN OMB BK DR I/O CT LSHF 1.0kN 12 OMB BK 12 MaxCapBBOM 50/125 multi mode MaxCapBBOM 50/125 multi mode MaxCapBBOM 50/125 multi mode 002077 8 2 of 3
0029959 DR I/O CT LSHF 1.0kN 2 OMB BK 2 MaxCapBBOM 50/125 multi mode 0020312 DR I/O CT LSHF 1.0kN MM1 BK OM1 2.5/125 multi mode C02 DR I/O CT LSHF 1.0kN MM1 BK OM1 2.5/125 multi mode C02 DR I/O CT LSHF 1.0kN 8 MM1 BK 8 OM1 2.5/125 multi mode C02 DR I/O CT LSHF 1.0kN 12 MM1 BK 12 OM1 2.5/125 multi mode C02 DR I/O CT LSHF 1.0kN 2 MM1 BK 2 OM1 2.5/125 multi mode C02 0027528 DR I/O CT LSHF 1.0kN SM2D BK OS2 Single mode G52.D C03e DR I/O CT LSHF 1.0kN SM2D BK OS2 Single mode G52.D C03e 00255 DR I/O CT LSHF 1.0kN 8 SM2D BK 8 OS2 Single mode G52.D C03e 001133 DR I/O CT LSHF 1.0kN 12 SM2D BK 12 OS2 Single mode G52.D C03e 0029590 DR I/O CT LSHF 1.0kN 2 SM2D BK 2 OS2 Single mode G52.D C03e DR I/O CT LSHF 1.0kN SM2D BK BendBright XS G.57.A2 C2 DR I/O CT LSHF 1.0kN SM2D BK BendBright XS G.57.A2 C2 PRYSMIAN GROUP 2010, All Rights Reserved All sizes and values without tolerances are reference values. Specifications are for product as supplied by Prysmian Group: any modification or alteration afterwards of product may give different result. The information contained within this document must not be copied, reprinted or reproduced in any form, either wholly or in part, without the written consent of Prysmian Group. The information is believed to be correct at the time of issue. Prysmian Group reserves the right to amend this specification without prior notice. This specification is not contractually valid unless specifically authorised by Prysmian Group. 3 of 3
C02: General purpose 2.5 µm fibre Properties of cabled OM1 fibre for use at 850 nm and at 1300 nm General and application This fibre is a gradedindex multimode fibre suitable for transmission speeds of up to 10 Gb/s (33m 10GBASESX). It has a 2.5 µm core diameter and a 125 µm cladding diameter. The fibre is designed for use at 850 and/or 1300 nm. This fibre is suitable for use in premises wiring application like LAN s with video, data and or voice services using LED, VCSEL and FabryPerot laser sources. Standards IEC 0793210 Category A1b ISO/IEC 11801 category OM1. EN 0793210: type A1b IEEE 802.3 2002. with amendment 802.3ae 2002. TIA/EIA92 AAAA ANSI/TIA/EIA58.B.3 2000 EN 501731:2007 category OM1 IBM Fibre Optic Channel Links; ESCON Optical properties Attenuation limit according to IEC 0793210, 850 nm IEC 079310 db/km 3.5 Attenuation limit according to IEC 0793210, 1300 nm IEC 079310 db/km 1.5 Inhomogeneity of OTDR trace for any two 1000 metre fibre IEC 079310 Max. 0.1 db/km lengths Cable attenuation Maximum attenuation value of cable at 850 nm IEC 079310 db/km 3.2 Maximum attenuation value of cable at 1300 nm IEC 079310 db/km 1.0 Bandwidth Overfilled (OFL) modal bandwidth at 850 nm IEC 079311 MHz km 200 Overfilled (OFL) modal bandwidth at 1300 nm IEC 079311 MHz km 00 Effective Modal Bandwidth (EMB) at 850 nm IEC 079319 MHz km Group index of refraction Group index of refraction at 850 nm IEC 0793122 1.9 Group index of refraction at 1300 nm IEC 0793122 1.91 C02_e Version 10.1 20120717 www.prysmiangroup.com Page 1 of 2
C02: General purpose 2.5 µm fibre Geometrical properties Core diameter IEC 0793120 µm 2.5 ± 2.5 Cladding diameter IEC 0793120 µm 125.0 ± 1.0 Cladding noncircularity IEC 0793120 % 1.0 Core noncircularity IEC 0793120 % 5 Corecladding concentricity error IEC 0793120 µm 1.5 Primary coating diameter uncoloured IEC 0793121 µm 22 ± 7 Primary coating diameter coloured IEC 0793121 µm 250 ± 15 Primary coating noncircularity IEC 0793121 % 5 Primary coatingcladding concentricity error IEC 0793121 µm Mechanical properties Proof stress level IEC 0793130 GPa 0.7 ( 1 %) Typical average strip force IEC 0793132 N 1.7 Strip force (peak) IEC 0793132 N 1.3 F peak.strip 8.9 PRYSMIAN GROUP 2012, All Rights Reserved All sizes and values without tolerances are reference values. Specifications are for product as supplied by Prysmian Group: any modification or alteration afterwards of product may give different result. The information contained within this document must not be copied, reprinted or reproduced in any form, either wholly or in part, without the written consent of Prysmian Group. The information is believed to be correct at the time of issue. Prysmian Group reserves the right to amend this specification without prior notice. This specification is not contractually valid unless specifically authorised by Prysmian Group. C02_e Version 10.1 20120717 www.prysmiangroup.com Page 2 of 2