User Guide Online Backup

User Guide Online Backup

Table of contents Table of contents... 1 Introduction... 2 Getting Started with the Online Backup Software... 2 Installing the Online Backup Software... 2 Configuring a Device... 4 Simple vs. Advanced View... 7 Simple Interface... 7 Advanced Interface... 7 Performing a One-off Backup... 8 Creating a Backup in Simple View... 8 One-off Backup... 10 Scheduling a Backup... 11 Creating a Backup in Advanced View... 12 One-off Backup... 15 Scheduling a Backup... 16 Backup Modes... 17 Full... 17 Incremental... 17 Differential... 17 SnapShot... 18 Restoring a Backup... 18 Restoring with the Simple View... 18 Restoring with the Advanced View... 20 Modifying the Online Backup Settings... 21 Managing Email Notifications... 21 Filtering Files during Backup Operations... 24 Enabling Anti-Virus Scanning... 25 Deleting Files from the Backup Server... 26 Page 1 of 28

Introduction The Online Backup service allows easy, fast, and reliable backups from multiple computers to one secure off-site storage server. Using our simple software you can create backups of your entire computer or individual files, schedule backups to run when convenient to your needs, restore files to any computer, and retrieve historical versions of your documents. Note: The Online Backup service is currently only available for Windows operating systems. The service is designed to ensure you have enough space for all of your files and data, with up to 1 Terabyte of storage available on your backup server. Getting Started with the Online Backup Software Our simple software will allow you to back up your data to your online backup space, schedule backups, and restore any backups to any computer. You are not limited to the number of computers you can install the software to, in order to back up your files. Installing the Online Backup Software Step 1 Run the Online Backup Client installer. Step 2 Ensure Backup Client is selected and click Install. Page 2 of 28

Note: The Online Backup Client requires Microsoft.NET Framework 3.5. If this is not already installed on your computer you will have the option to install at this stage before you install the Backup Client. Step 3 Select your preferred language and click Next, then Next again. Step 4 You will be presented with the licence agreement. Confirm you agree with the licence by selecting I accept the terms in the Licence Agreement and click Next. Step 5 Select Typical and click Next. Page 3 of 28

Quick tip: If you are an experienced user the Custom option will let you change the installation folder and select which components you would like to install. The Online Backup software installation will take a few moments to complete. You can open the application by clicking the icon on your desktop or in your Windows Start Menu. Configuring a Device Before you can start backing up your files you must configure a device, which stores all the connection details to your backup server. Step 1 The first time you open the Online Backup software after installation, you will be prompted to create a new device automatically, and you can skip to Step 3. If you are adding an additional device you will need to make sure you are using the Advanced view. Click the Switch to Advanced View button at the bottom of the window. Page 4 of 28

Step 2 Select the Device tab at the top of the window, and then click Add. Step 3 On the Account tab, enter a name to help you identify the backup server in the Device Name text field. Step 4 Enter 88.208.254.19 in the Server Name or IP Address field. Step 5 Enter the Username you chose when you added the Online Backup service, and then enter and confirm your Password. Make sure Use my current Windows login credentials is not selected, and click Test Connection. Page 5 of 28

You should receive a confirmation that the connection test was successful. Step 6 The Security tab allows you to choose your secret key. The secret key is used to encrypt your data and ensures only users with your key can restore your backups. The default option is to use your Online Backup password as your secret key, which should be suitable for most users. It is possible to choose your own secret key to use instead of the password. Specifying another secret key will ensure that any other Online Backup clients on other computers that connect to the same account will not be able to restore your files. Important: If you specify your own secret key make sure you keep it safe. We do not keep a record of your secret key, and if you lose it you will not be able to restore your files. Step 7 If you connect through a Firewall/Proxy Server enter the details on the Proxy tab. Step 8 Click OK to create the new device. Page 6 of 28

You are now ready to perform your first backup or create a backup schedule. Simple vs. Advanced View The Online Backup software has two interfaces for you to choose between: Simple and Advanced. Simple Interface The Simple interface is the default interface and provides an uncluttered and easy to use interface which most users will find suitable. It provides a Home tab with the following four options: Refresh my Backup: Run your default backup job to backup new copies of your files to the server. Setup my Backup: Use a simple wizard to perform a one-off backup or create a backup schedule. Restore: Restore files from a previous backup. Online Storage: Configure your default device settings, including updating the login details, security options, and proxy settings. As well as removing all but the most necessary backup options, the Simple Interface also uses wizards for any configuration tasks to helpfully guide you through the process. You can only manage one backup device in the Simple interface. If you have created more than one Online Backup account in your control panel and wish to use one client on one computer to backup to multiple accounts, you will need to use the Advanced interface. Advanced Interface The Advanced interface provides several additional options and features from the Page 7 of 28

Simple interface, and is recommended for experienced users. It gives much more control and flexibility over the configuration of your backups. Using the additional tabs at the top of the window you can access: Home: The home tab provides shortcuts to backup documents, emails, music, and pictures as well as shortcuts to backup and schedule tasks. Backup: Shows a list of the files on your local machine. Simply select the file(s) you want to backup and click Backup. Restore: Shows a list of previous backups, select the file(s) you want to restore and pull them straight down to your computer. Logs: View log files from previous backups. Useful for troubleshooting information. Schedule: Manage your backup schedules in one place. Device: Add and manage your devices. The Simple interface only allows one device, but in the Advanced interface you can manage as many Online Backup accounts as you wish. Delete: Allows you to delete files from your storage server. Status: The status tab shows the status of any active jobs. This tab is also available in the Simple view. Performing a Backup The Online Backup software makes it very easy to perform or schedule a backup of one or more files at the click of a few buttons. This article assumes you have already created your Online Backup server device. If you haven t see the chapter Configuring a Device on page 4. There are several ways to back up your files, and the method you use may depend on whether you are using the Simple or Advanced view. Creating a Backup in Simple View Step 1 On the Home tab click Setup My Backup. Page 8 of 28

Step 2 The Backup Wizard will appear. Choose which files you would like to back up: Entire Drive: Back up all the files on your entire hard disk drive, including operating system files. Personal Files: This will back up all files and folders within your "My Documents" folder. Let me choose specific files to backup: Select this option if you want to choose which files or folders are backed-up. Step 3 Select whether you want to backup all files, or only the files that have been modified since your last backup. All files will be backed up if they are not found on the server. Page 9 of 28

Step 4 Select the Online Backup server device you would like to back your files up to and click Next. Step 5 If you selected Let me choose specific files to backup in Step 2 you will be prompted to select the files and folders to backup. When you are finished click Next. Step 6 This step will depend on whether you want to create a one-off backup or schedule a backup to run at regular intervals. One-off Backup Select Run my backup now to run the one-off backup immediately, and click Finish. Page 10 of 28

The process will take several minutes to several hours; depending on the size and number of files you are backing up, and the speed of your connection. A progress bar will display during the backup. Scheduling a Backup Select Run my backup later and several scheduling options will appear. Select how often you would like to run the backup from the Schedule Type drop down list and choose the dates and times in the Schedule Settings box on the right. Click Finish to create the schedule. Page 11 of 28

Creating a Backup in Advanced View Step 1 Click Backup Wizard on the Home tab. Step 2 The Backup Wizard will appear. Select what you would like to backup from the following options: All of my <drive>: Choose to backup all files and folders on your entire hard drive. Smart select: Choose whether to backup your My Documents folder, email, music, or pictures. Page 12 of 28

Let me select items manually: Choose which files to backup. Use previously saved job: If you have performed a backup in the past you can re-run it again. Step 3 If you selected Let me select items manually choose the files and folders you wish to backup and click Next. Step 4 Enter a name to help you recognise this backup in the Backup Name field. Click the Backup to button and choose your Online Backup server device. Page 13 of 28

Step 5 Select the Write Mode and Backup Mode you wish to use. The different backup modes are explained in the chapter Backup Modes on page 17. Step 6 Select the options you want for your backup and click Next. Use Software Compression: If you enable this option your backups will be compressed, reducing the backup space required on the server but increasing the time it takes to backup and restore your files. Verify Data After Backup: Select this option to check the data was copied successfully after the backup is complete. Enable Open File Backup: If this option is selected any files that are currently in use will be closed before backup. If it is not selected any open files will be ignored. Enable Virus Scanning: This option scans each file for viruses and notifies you if one is found. You can choose to ignore the warning and continue to back up the files, or to skip the file. Note: The virus software provided with the Online Backup software is only able to detect the presence of viruses. It is not able to clean infected files. Page 14 of 28

The following steps will depend on whether you are creating a one-off backup, or scheduling a backup to run at regular intervals. One-off Backup Step 7 Select Run now from the Type of Schedule drop down list. Step 8 If you want to run the Online Backup software under a different Windows user, select Run as specific user and enter the necessary login credentials. Step 9 Click Finish. The process will take several minutes to several hours, depending on the size and number of files you are backing up, and the speed of your connection. A progress will display during the backup. Page 15 of 28

Scheduling a Backup Step 7 Select how often you would like the schedule to run from the Type of Schedule drop down list. Step 8 Click the Job Name drop down and select a file. Step 9 In the Scheduling Information box select the first date and time and the frequency with which you would like the backup schedule to run. Step 10 If you want to run the Online Backup software under a different Windows user, select Page 16 of 28

Run as specific user and enter the necessary login credentials. Step 11 Click Finish. Backup Modes The Online Backup software offers four different backup modes when creating a oneoff or scheduled backup job: Full, Incremental, Differential, or SnapShot. Full Performs a full backup of all selected files, regardless of whether or not they have changed since the last backup. Incremental Backs up all files that have been modified since the last Full or Incremental backup. For example if the first backup occurs on a Monday all files will be copied. Another backup on Tuesday will back up only the files that have been modified since the Monday backup. Another backup on Wednesday will only back up files that have been modified since the Tuesday backup and so on. Differential Backs up all files that have not been modified since the last full backup. If the first backup occurs on Monday all files will be copied. Another Differential backup on Tuesday will back up all files modified since Monday, and another backup on Wednesday will ignore Tuesdays backup and will also backup all files modified since the Monday backup. In fact, all Differential backups will backup files modified since the Monday backup until another Full backup of all files is made. Page 17 of 28

SnapShot Fully backs up all of the selected files, but does not mark them as backed up. For example, if a full backup occurs on Monday, a SnapShot backup on Tuesday will also back up all selected files. However an Incremental or Differential backup on Wednesday will ignore the Tuesday backup completely and back up files that were modified since the Monday backup. Restoring a Backup You can restore data from your Online Backup server to your computer in a few simple steps. The method you use to back up your files you use may depend on whether you are using the Simple or Advanced view. Restoring with the Simple View Step 1 On the Home tab click Restore. Step 2 In the Media box at the top of the Restore Wizard, select the backup containing the files you wish to restore. This will be located under your chosen device name. Page 18 of 28

Quick tip: You can also sort your backups by the date they were created by clicking To Time Mode. Step 3 Select the files you want to restore. You can select entire drives or folders from the panel on the left or individual files from the right hand panel. Step 4 Click Next. Step 5 Choose what you would like to happen if the Online Backup software restores a file that already exists on your machine. The default is to replace the file on your computer with the backup copy, but you can choose to keep your local file or only update if the backup copy is newer than your local copy. Page 19 of 28

Step 6 The Online Backup client will restore your files to their original location by default. However, you can specify to restore the files to a different folder on your local machine. Step 7 Click Finish to begin the restore process. This process may take anything from a few minutes to several hours. Restoring with the Advanced View Step 1 Click the Restore tab. Step 2 Under Restore Files By Device select the backup containing the files you wish to restore. This will be located under your chosen device name. Quick tip: You can also sort your backups by the date they were created by clicking To Time Mode. Page 20 of 28

Step 3 Select the files you want to restore. You can select entire drives or folders from the panel on the left or individual files from the right hand panel. Step 4 Click Restore in the bottom-right of the Online Backup client main window. The restore process may take anything from a few minutes to several hours. Modifying the Online Backup Settings The Online Backup client has a number of configuration settings to make the software work in the way that best suits your needs. On the Home tab, expand the Settings panel on the left of the window and click Default Settings. Managing Email Notifications The Online Backup software can send email notifications containing the log files or Page 21 of 28

errors created during a backup process. This is useful if you schedule backups to occur on a regular basis when you are away from your computer. Step 1 Click on the Notification tab. Step 2 Under Log Creation Options, select the option that suits you. None: No log files are created. This is not recommended and should only be selected if you are low on disk space on your computer. Summary: This is the default option and stores general information on your backup jobs and any errors encountered. Detail: This option enables detailed log files, which will send out advanced information on the backup. This option will greatly increase the size of the emails and is only recommended for troubleshooting purposes. Step 3 In the Notification Options box, select E-mail. If you would like the log file created for the backup job to be emailed to you as an attachment select Attach log file in E-mail. Step 4 Select whether you want the notifications to be sent out only if errors or warnings are encountered during a backup job, or whenever a job is completed. Step 5 Click E-mail Settings. Step 6 In the User Information box enter your name and the email address of the mailbox you will be sending the email notification from. Page 22 of 28

Step 7 In the Server Information box, enter: SMTP Server Name: The host name or IP address of your SMTP server. For example smtp.ralphsdomainname.com. SMTP Server Port: The port to use to send the mail. 25 is the default. Use SSL: Select this if your email server uses a secure connection. My SMTP server requires authentication: Enter the username and password required. Retries: Set the number of times to retry if the email fails to send. The default is 1. Timeout Interval: This is the number of seconds to wait before retrying to send the email. The default is 5 seconds. Step 8 In the Recipient Information box enter the email address you would like to send the email notifications to. You can enter multiple email addresses in either the To or CC fields, separated by semi-colons (;). Step 9 Click Test Email Settings and the Online Backup client will attempt to send a test Page 23 of 28

message. If there are any errors check your User Information and Server Information settings are correct and try the test again. Filtering Files during Backup Operations You can set the Online Backup client to filter files during the backup process. You can filter files based on their file name, file type, dates created or modified, or attributes. For example you could set the software to back up all selected files except PDF's, or all files with the exception of read-only or system files. Step 1 Click on the Filters tab. Step 2 If you would like to ensure certain file types are copied, select Include Wildcard. To exclude certain file types select Exclude Wildcard. Enter the file types you would like to include or exclude in the relevant box, in the format *.<extension>. Separate file types with a comma. For example to include or exclude images, enter *.jpg, *.gif, *.png, *.bmp. Step 3 If you would like to filter any files by date, select the criteria in the Include Files with these Dates and Size box. You can select to filter by the date the file was created, modified or last accessed, or any combination of these dates. You can also choose to filter files by their file size, selecting files that are above a certain size, below a certain size, or between two specified sizes. Page 24 of 28

Step 4 If you would like to filter by attribute, select the required options in the Exclude Files with these Attributes box. You can filter read-only, hidden, or system files. Enabling Anti-Virus Scanning The Online Backup software is able to scan files for virus during a backup and notify you if any are found. You can choose whether to skip affected files or ignore the virus and copy the file. Note: The virus software provided with the Online Backup software is only able to detect the presence of viruses. It is not able to clean infected files. Click the Anti-Virus tab and select Enable Virus Scanning. Page 25 of 28

Choose whether to skip files that are found to contain a virus or to ignore the warning and back the file up regardless. Deleting Files from the Backup Server You can delete files from the Online Backup server if they are no longer required. Important: Be careful when deleting files from the backup server. Deletion will remove all historical versions of a file, and there is no way to recover deleted data. Step 1 The ability to delete files is only available in the Advanced view. If you are currently using the Online Backup software in Simple view, click Switch to Advanced View at the bottom of the window. Step 2 Click on the Delete tab. Step 3 In the left panel browse to the folder which contains the files and folders you want to delete. This will be listed under your device name. Page 26 of 28

Step 4 Select the files and folders you want to delete in the right-hand panel and click Delete in the bottom-right of the window. Quick tip: You can select multiple files or folders by holding the [CTRL] button on your keyboard while you click them. Step 5 Confirm you would like to delete the selected files by clicking Yes. Page 27 of 28