RV-752/-754/-756 7 Rear view system VEHICLE 5.6 TFT LCD 7 LANGUAGE INSTRUCTION MANUAL Thank you for purchasing this product. For proper usages and application, Please read this instruction manual thoroughly PRINTED IN KOREA ver. 1.5
CONTENTS SAFEGUARD INSTRUCTIONS---------------------------------------- FEATURE ------------------------------------------------------ BOX CONTENTS -------------------------------------------------------- BEDIENELEMENTE ----------------------------------------------------- FUNCTION OF EACH PART ---------------------------------------- FUNCTION ------------------------------------------------------------ CONNECTIONS ---------------------------------------------------- INSTALLATION -------------------------------------------------- SPECIFICATION ------------------------------------------------- 2
SAFEGUARD INSTRUCTIONS 7 Rear view system Please read the Safety Rules carefully before using this product. Following the safety rules prevents users from damages related with the misuse of the product. It is very important to follow these safety rules. We state Caution and Warning to clarify any potential risk for a damage associated with the misuse of the product. CAUTION WARNING This information is for preventing damage or shorten the life time of the products. This information is for preventing bodily harm or even death and use should follow this safety rules. CAUTION Should install while power off. (After install products, connect DC jack) --- It may cause to electronic shock or malfunction. While stop driving (parking), set the car in motion. --- It may cause battery discharge.. Do not use multi socket or extended adaptor. --- It may cause unexpected heating, fire and malfunction. Unplug product when do not use for a long time. --- It may case fire by short circuit due to heating. Do not place near magnet. --- It may cause malfunction and trouble. 3
WARNING Do not put the product in place where sudden temperature increasing and should use on optimum voltage, temperature and humidity Do not get product wet and operate with wet hands. --- It may cause to electronic shock or malfunction. Do not place where interfere with visual field and watch or operate monitor during driving. Keep clean dust on power socket. Do not pull cord with a jerk, should catch a plug and pull. Do not use damaged cord. When clean exterior, power off and wipe with dry cloth. Do not clean exterior with volatility or oily solvent. Neither keep touching rubber and plastic for long time. Do not place where vibration and shock. Do not put a pin or needle on the hole or crack in the body. Do not use in problem condition as like smoking, smell something burn. Do not disassemble, repair and remodeling. 4
1 FEATURE 7 Rear view system CM-8 8bit MICRO controller TFT LCD with high resolution and low reflection All functions are displayed on screen (OSD function) PWM volume control Mode selection function Low energy consuming rate Language Display Selection (KOR-JPN-GER-ENG-SPA-FRE-ITA) 1 Cable solution Free voltage (From DC 12V to DC 24V) Dimmer selection function CM-32 1/3 COLOUR- CCD Sensor 6 IR LEDs for night view Built-in microphone Built-in heating function Waterproof (IP-67) Aluminum die-casting housing CM-42 1/3 SONY COLOR CCD image sensor 6 pcs of IR LEDs for night view Built-in microphone Built-in heating function Waterproof (IP-67) Aluminum die-casting housing Night vision using the CdS sensor. Automaticall tilt camera lens CM-46 1/3 SONY COLOR CCD image sensor 6 pcs of IR LEDs for night. Audio Function(Option) Heating function Built-in Waterproof (IP-67) Aluminum die-casting housing Night vision using the CdS sensor. Automatic shutter open(close) while moving reverse(forward). 5
BOX CONTENTS 2 7 Rear view system Monitor Stand Monitor Cable Cigar Cable Optional CM--32 CM-42 CM-46 Accessory Pack 3 FUNCTION OF EACH PART 7 Rear view system 1 S/BY LED 2 POWER 3 MODE 4 MENU 5 UP/DOWN Stand-by Display Power ON/OFF button CAM1 / CAM2 / AV selection function SETUP/PICTURE selection function SOUND/MENU level control 6
4 FUNCTION 7 Rear view system 1 POWER ON OFF 1) Press [POWER] button to the power. (STAND BY state is OFF) 2) Press [POWER] button again to off the power. 2 MODE It is a function to change video signal. CAM1 1) Press [MODE] button. 2) CAM1/CAM2/AV1 appears on the screen and it is disappearing 5 seconds after setting. 3MODE CAM1(AV1) CAM2(AV2) AV(AV3) 3 UP/DOWN Press VOL (VOL+/-) button on remote control or UP/DOWN button on monitor to adjust volume. VOLUME 30 VOLUME 7
4 MENU It is a function to select MAIN MENU (SETUP/PICTURE/CAMERA) 1) Press [MENU] button to select MAIN MENU, changed color in red when it is selected. SETUP PICTURE CAMERA 2) Press [MODE] button to select SUB MENU, UP/DOWN button to change SUB MENU. DIMMER LANGUAGE DIRECTION RESET ENGLISH 0 CONTRAST BRIGHTNESS COLOR TINT [ 1. SETUP ] DIMMER LANGUAGE ENGLISH DEUTSCH ITALIANO FRANCAIS ESPAnOL 한국어 日本語 DIRECTION DIMMER LANGUAGE DIRECTION RESET ENGLISH 0 ENGLISH 180 DIMMER LANGUAGE DIRECTION RESET RESET A factory default reset will clear all of OSD information. 8
[ 2. PICTURE USER ] 1) MODE button to select CONTRAST, BRIGHTNESS, COLOR, TINT MENU. (Selected menu in red) 2) Push VOLUME UP/DOWN button to change the settings of the diferent menu points. CONTRAST BRIGHTNESS COLOR TINT CONTRAST BRIGHTNESS COLOR TINT CONTRAST BRIGHTNESS COLOR TINT CONTRAST BRIGHTNESS COLOR TINT [ 3. CAMERA (OPTION) ] CAM1 NORMAL 1) Press the mode button to choose CAM1; CAM 2 will turn red. 2) Press the VOLUME UP, DOWN button. NORMAL/MIRROR sign will be appear in order to adjust the screen to the right or left or to reverse the image. NORMAL/ MIRROR signal will turn RED. 9
5 CONNECTIONS 7 Rear view system CAMERA1, 2, AV1 10 CAMERA(OPTION) CAMERA 1 CAMERA 2 BLACK(CAMERA1) GREEN(CAMERA2) VIDEO AUDIO DC INPUT MDM-026A (OPTION) CIGAR CABLE BLACK (CAMERA 1, Priority) FOR REAR VIEW Connect this line to + of reverse light lamp. GREEN (CAMERA 2) FOR SIDE VIEW Connect this line to + of side light lamp.
6 INSTALLATION 7 Rear view system (1) Please set the place for Monitor installation. Clean the place where to install stand and install stand firmly after removing protect tape of stand bottom. (2) Fix the stand with enclosed screws. (3) Assemble the monitor to stand and fix it in the right angle. (4) Connect cable as follows. Cable Guidance Fix Knob (Bracket) Tapping Screw Stand Control Knob (Angle) Protect tape * Monitor Cable Connection Cable Guidance use Normal Connection 11
Cameras 1. Determine a position and a direction of installation so that the rear view can be effectively seen on the monitor screen. 2. Fix the camera bracket to the vehicle using the provided adhesive tape and tapping screws. 3. Place a camera and sun visor to fixed bracket and assemble them with enclosed screws. 4. Run the cable from the monitor to the camera. CM-32 Screws Sun visor Screws camera bracket camera bracket Selfadhesif glue CM-32A Camera Connector 1. CAMERA B+ (DC +12V) 2. HEATING B+ (DC +12V) 3. NC 4. VIDEO OUT 5. AUDIO OUT 6. NOR/MIR 7. GND 12
CM-42 CM-42A Camera connector 1. CAMERA B+ (DC +12V) 2. HEATING B+ (DC +12V) 3. STAND BY 4. VIDEO OUT 5. AUDIO OUT 6. N.C 7. GND CM-46 CM-46 Camera connector * When you install the sun visor, please be careful not to touch with shutter moving area. 1. CAMERA B+ (DC +12V) 2. HEATING B+ (DC +12V) 3. STAND BY 4. VIDEO OUT 5. AUDIO OUT(OPTION) 6. N.C 7. GND 13
14 7 SPECIFICATION 7 Rear view system CM-8 SPEZIFIKATIONEN PRODUKT NTSC PAL BILDSCHIRMGRÖßE 17,78 cm PIXEL 112,320(H) x 1440(RGB) x 234(V) Pixelabstand 0.107(W) x 0.3(H) mm BILDSCHIRM HELLIGKEIT 400 cd/m 2 ANZEIGEBEREICH 154 (W) x 86.6 (H) mm BLICKWINKEL 60 (H) / (U) / 40 (D) VOLT DC 12V - 24V STROMVERBRAUCH STROMAUFNAHME 400mA (DC 12V, nur Monitor) VIDEOSYSTEM Automatische Erkennung PAL/NTSC HORIZONTAL 15.734 KHz 15.625 KHz FREQUENZ VERTIKAL 60 Hz Hz EINGÄNGE Composite Video 75Ω 1Vp-p SPRACHEN 7 BETRIEBSTEMPERATUR -15 C ~ 65 C LAGERTEMPERATUR -30 C ~ 85 C GRÖßE 201(B) x 117(H) x 30,7(T) mm GEWICHT 0,4 Kg CM-32 Pick-up device Resolution Lens View angle Minimum illumination White balance Microphone Heizfunktion Lights Operating temperature Input voltage Dimensions Protection NTSC PAL 1/3 Colour- CCD 1/3 Colour- CCD 2.000 Pixels 290.000 Pixels F 2.0 120 (diagonal) 0.1 Lux auto yes yes 6xIR LED -15 C ~ 65 C DC 12V / 200mA Max. (W) x 44(H) x 57(T) mm (only camera) IP 67
CM-42 Pick-up device View of angle Minimum illumination Input voltage Operating temperature Dimensions Weight CM-46 Pick-up device View of angle Minimum illumination Input voltage Operating temperature Dimension Weight NTSC PAL 1/3 2,000 pixels COLOR CCD 1/3 290,000 pixels COLOR CCD 95 (H) / (V) / 120 (D) 0.1 lux DC 12V / 200mA Max. -15 C ~ 65 C (5 F ~ 149 F) 78.4(W) x 52.0(H) x 56.5(D) mm / 3.09(W) x 2.04(H) x 2.22(D) (Camera Only) 0.4kg / 0.88lbs (including bracket and sunvisor) NTSC 1/3 2,000 pixels COLOR CCD 1/3 290,000 pixels COLOR CCD 95 (H) / (V) / 120 (D) 0.1 lux DC 12V / 200mA Max. -10 C ~ 60 C 78(W) x 40(H) x 54(D) mm (Camera Only) 282g (Camera Only) * Design and specifications are subject to change without notice. 15
Tel. Fax. E-mail Internet +49 (0) 4154 / 93202-0 +49 (0) 4154 / 93202-20 info@camos-multimedia.com www.camos-multimedia.com 16 Address IMC GmbH (Germany) Nikolaus-Otto-Str. 16 D-22946 Trittau