DIN-Rail Ethernet to Fiber Media Converter v1.0 / Jan, 013 IMC-P111FX / IMC-P111P Series Features IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) to 1x100Base-FX fiber or 1x100Base-FX SFP socket Designed for Railway application and fully compliant with the requirement of IEC 61850-3 and IEEE 1613 Leading EN50155-compliant Ethernet switch for rolling stock application Supports 1 port 10/100Base-T(X) auto-negotiation and auto-mdi/mdi-x Support Ethernet to fiber or Ethernet to SFP port Support LFP (Link Fault Pass-through) function Supports full/half duplex operation Supports store and forward transmission Supports relay output for power failed alarm Provided DIP-Switch to setting function High reliability and rigid IP-30 housing DIN-Rail and wall mounting enabled Introduction IMC-P111 series is a cost-effective solution for the conversion between 10/100Base-T(X) and 100Base-FX interface; it allows you to extend communication distance by optical fiber. IMC-P111 series are designed for power substation application and rolling stock application, fully compliant with the requirement of IEC 61850-3 and IEEE 1613. IMC-P111 series supports MDI/MDIX auto detection, so you don t need to use crossover wires. IMC-P111 series with wide operating temperature range from -40 ~ 85 O C and accepts a wide voltage range power inputs, so it is suitable for harsh operating environments. IMC-P111 series also support the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. Use the DIP-Switch to enable the LFP function, then IMC-P111 series will force the link to shutdown as soon as noticed that the other link has failed, giving the application software a chance to react to the situation. Therefore, the IMC-P111 series is reliable media converter and can satisfy most demand of power substation and rolling stock application. -38
DIN-Rail Ethernet to Fiber Media Converter v1.0 / Jan, 013 Ethernet Switch Media Converter Device Server IMC-P111FX IES-1050A IMC-P111FX Access Point Wireless Dimensions IMC-P111-LV Series VPN Router Cellular MM Gateway IMC-P111-HV Series pplication Accessories (Unit=mm) Management Software Network Designed for Rugged Excellence -39
DIN-Rail Ethernet to Fiber Media Converter v1.0 / Jan, 013 Specifications Physical Ports ORing Media Converter Model IMC-P111FX-MM IMC-P111FX-SS IMC-P111P 10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX 1 1 1 Fiber Ports Number 1 1 - Fiber Ports Standard 100Base-FX 100Base-FX - Fiber Mode Multi-mode Single-mode - Fiber Port Specification Fiber Diameter (µm) 6.5/15 µm 50/15 µm 9/15 µm - Fiber Optical Connector SC SC - Typical Distance (Km) Km 30 Km - Wavelength (nm) 1310 nm 1310 nm - Max. Output Optical Power (dbm) -14 dbm -8 dbm - Min. Output Optical Power (dbm) -3.5 dbm -15 dbm - Max. Input Optical Power (Saturation) Min. Input Optical Power (Sensitivity) 0 dbm 0 dbm - -31 dbm -34 dbm - Link Budget (db) 7.5 db 19 db - 100Base-FX SFP port - - 1 Technology Ethernet Standards Processing DIP-Switch setting Alarm DIP-Switch DIP-Switch 1 DIP-Switch LED Indicators Power Indicator 10/100Base-T(X) RJ45 port indicator 100Base-FX fiber port indicator LFP statue indicator Fault indicator Duplex indicator Power LV Model Input Power HV Model Input Power Power consumption (Typ.) IEEE 80.3 for 10Base-T IEEE 80.3u for 100Base-T(X) and 100Base-FX IEEE 80.3x for Flow control Store-and-Forward DIP-Switch 1 for LFP mode selection : (ON) enable / (OFF) disable DIP-Switch for Ethernet speed selection : (ON)10Mbps / (OFF) 10/100Mbps Auto-negotiate DIP-Switch 3 for Ethernet full/half duplex selection : (ON) Half-duplex / (OFF) Full/Half-Duplex Auto-negotiate DIP-Switch 4 for fiber full/half duplex selection : (ON) Half-Duplex / (OFF) Full-Duplex Power-1 failed warning : (ON) enable, (OFF) disable Power- failed warning : (ON) enable, (OFF) disable Green : Power LED x 3 (ON : power input on-line / (OFF) power input off-line Green for port Link/Act (ON) Link up / (Blinking) Acting / (OFF) Link down Amber for port duplex indicator (ON) Full-Duplex / (OFF) Half-Duplex Green for fiber port Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down Amber for fiber port duplex indicator (ON) Full-Duplex / (OFF) Half-Duplex Amber LED (ON) LFP function fail / (OFF) LFP function disable Amber : Indicate unexpected event occurred Green for port duplex indicator (ON) Full-Duplex / (OFF) Half-Duplex Triple DC inputs. Dual 1~48VDC on 7-pin terminal block, one 1~45VDC on power jack Dual 100~40VAC power inputs on 8-pin terminal block LV model : 1 Watts, 40VAC/5.8Watts) LV model : 1 Watts 40VAC/5.8Watts) LV model : 1 Watts 40VAC/5.8Watts) -40
DIN-Rail Ethernet to Fiber Media Converter v1.0 / Jan, 013 Overload current protection Reverse polarity protection Physical Characteristic Enclosure Dimension (W x D x H) Weight (g) Environmental Storage Temperature Operating Temperature Operating Humidity Regulatory approvals Present Present on terminal block IP-30 5(W)x106.1(D)x144.3(H) mm (.05x4.18x5.68 inch.) LV model : 660 g HL model : 80 g -40 to 85 C (-40 to 185 F) -40 to 85 C (-40 to 185 F) 5% to 95% Non-condensing Power Automation IEC 61850-3, IEEE 1613 EMI EMS Shock Free Fall Vibration Safety Warranty Ordering Information IMC-P1 AB CC - DD-EE LV model : 660 g HL model : 80 g LV model : 650g HV model : 79g FCC Part 15, CISPR (EN550) class A, EN50155 (EN5011-3-, EN55011, EN5011-4) EN61000-4- (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 IEC60068--7 IEC60068--3 IEC60068--6 PEN60950-1 5years Ethernet Switch Media Converter Device Server Wireless Access Point Code Definition 10/100Base-T(X) Port Number 100Base-FX Fiber Port Number Option - 1: 1 port - 1: 1 ports Model Name Fiber Port Type Fiber Optical Mode Fiber Optical Connector -FX: 100Base-FX fiber -P: 100Base-FX SFP -MM: Multi-mode -SS: Single-mode Description -SC: SC connector VPN Router Cellular IMC-P111FX-MM-SC-LV IMC-P111FX-SS-SC-LV IMC-P111FX-MM-SC-HV_US IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and 1x100Base-FX, multi-mode, Km/1310nm, SC connector, low-voltage power inputs IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and 1x100Base-FX, single-mode, 30Km/1310nm, SC connector, low-voltage power inputs IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and 1x100Base-FX, multi-mode, Km/1310nm, SC connector, high-voltage power inputs, US power cord MM Gateway IMC-P111FX-SS-SC-HV_US IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and 1x100Base-FX, multi-mode, Km/1310nm, SC connector, high-voltage power inputs, UK power cord Available Model IMC-P111FX-MM-SC-HV_UK IMC-P111FX-SS-SC-HV_UK IMC-P111FX-MM-SC-HV_EU IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and 1x100Base-FX, SFP socket, lowvoltage power inputs IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and 1x100Base-FX, single-mode, 30Km/1310nm, SC connector, high-voltage power inputs, UK power cord IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and 1x100Base-FX, multi-mode, Km/1310nm, SC connector, high-voltage power inputs, EU power cord Accessories IMC-P111FX-SS-SC-HV_EU IMC-P111FX-MM-SC-HV_JP IMC-P111FX-SS-SC-HV_JP IMC-P111P-LV IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and 1x100Base-FX, single-mode, 30Km/1310nm, SC connector, high-voltage power inputs, EU power cord IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and 1x100Base-FX, multi-mode, Km/1310nm, SC connector, high-voltage power inputs, JP power cord IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and 1x100Base-FX, single-mode, 30Km/1310nm, SC connector, high-voltage power inputs, JP power cord IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and 1x100Base-FX, SFP socket, lowvoltage power inputs Management Software Network Designed for Rugged Excellence -41
Available Model Model Name IMC-P111P-HV_US IMC-P111P-HV_UK IMC-P111P-HV_EU IMC-P111P-HV_JP Packing List IMC-P111FX/P111P Quick Installation Guide Din-Rail Kit Wall-Mount Kit Description IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and 1x100Base-FX, SFP socket, highvoltage power inputs, US power cord IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and 1x100Base-FX, SFP socket, highvoltage power inputs, UK power cord IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and 1x100Base-FX, SFP socket, highvoltage power inputs, EU power cord IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and 1x100Base-FX, SFP socket, highvoltage power inputs, JP power cord Optional Accessories (Can be purchased separately) SFP100 series : 100Mbps SFP optical transceiver DR-45 series : 45 Watts power supply DR-75 series : 75 Watts power supply DR-10 series : 10 Watts power supply -4