Introduction to latest innovation in advanced industrial instrumentation UNIT 6 BASIC INSTRUMENTATION

Introduction to latest innovation in advanced industrial instrumentation UNIT 6 BASIC INSTRUMENTATION

Outline Simple block diagram of DCS ( Introductory) Simple block diagram of PLC ( Primary level ) Introduction to industrial application of controllers ( only List )

Simple block diagram of DCS ( Introductory) A distributed control system (DCS) is a computerized control system for a process or plant usually with a large number of control loops, in which autonomous controllers are distributed throughout the system, but there is central operator supervisory control.

Simple block diagram of DCS ( Introductory)

Simple block diagram of DCS ( Introductory) Level 0 contains the field devices such as flow and temperature sensors, and final control elements, such as control valves Level 1 contains the industrialized Input/output (I/O) modules, and their associated distributed electronic processors. Level 2 contains the supervisory computers, which collect information from processor nodes on the system, and provide the operator control screens. Level 3 is the production control level, which does not directly control the process, but is concerned with monitoring production and monitoring targets Level 4 is the production scheduling level. Levels 1 and 2 are the functional levels of a traditional DCS, in which all equipment are part of an integrated system from a single manufacturer. Levels 3 and 4 are not strictly process control in the traditional sense, but where production control and scheduling takes place.

Simple block diagram of PLC ( Primary level ) PLC stands for programmable logic control. It is computer designed to be used in industry. It controls the different process and is programmed According to the operational requirement of that process.

Simple block diagram of PLC ( Primary level ) Processor section (CPU) The processor section is brain of PLC which consists of RAM, ROM, logic solver and user memory. The central processing unit is heart of PLC. CPU controls monitors and supervises all operation within PLC. The CPU makes decision and executes control instructions based on the program instruction in memory. Input and output module The input module is a mediator between input devices and central processing unit (CPU) which is used to convert analog signal into digital signal. The output module is a mediator between output devices and central processing unit (CPU) which is convert digital signal into analog signal.

Simple block diagram of PLC ( Primary level ) Power supply Power supply is provided to the processor unit, input and output module unit. Power supply may be integral or separately mounted unit. Most of the PLC operates on 0 volts DC and 24 volts. Memory section The memory section is the area of the CPU in which data and information is stored and retrieved. Data Memory is used to store numerical data required in math calculation, bar code data etc. User memory contains user s application program.

Simple block diagram of PLC ( Primary level ) Programming device Programming devices are dedicated devices used for loading the user program into the program memory or edit it and to monitor the execution of the program of the PLC. It is also used to troubleshoot the PLC ladder logic program. Hand held terminal (HHT) or dedicated terminal or personal computer are programming devices commonly used in most of the PLCs.

Introduction to industrial application of controllers ( only List ) Industrial controllers are used in many applications like Continuous bottle filling system Traffic Control Batch Mixing Stage Air conditioning system Furnace Temperature Control Batch Temperature Control

Assignment Draw block diagram of PLC. Draw Block diagram of DCS. Draw block diagram PLC and explain function of each block. List only the applications of controller used in industry.

Thanks