Real4Test http://www.real4test.com Real IT Certification Exam Study materials/braindumps
Exam : 300-075 Title : Implementing Cisco IP Telephony & Video, Part 2 v1.0 Vendor : Cisco Version : DEMO Get Latest & Valid 300-075 Exam's Question and Answers 1 from Real4test.com. 1
NO.1 A local gateway is registered to Cisco TelePresence Video Communication Server with a prefix of 7. The administrator wants to stop calls from outside the organization being routed through it. Which CPL configuration accomplishes this goal? A) B) C) Get Latest & Valid 300-075 Exam's Question and Answers 2 from Real4test.com. 2
D) E) Get Latest & Valid 300-075 Exam's Question and Answers 3 from Real4test.com. 3
A. Exhibit A B. Exhibit C C. Exhibit B D. Exhibit D E. Exhibit E Answer: A NO.2 Which two configuration items must you verify when a Cisco Unified IP Phone fails to register to the secondary Call Manager server? (Choose two.) A. SRST Reference Configuration B. Date/Time Group Configuration C. Cisco Unified CM Group Configuration D. Application Server Configuration E. Device Pool Configuration Answer: A,C NO.3 How does Cisco Extension Mobility work? A. A user can log in to any IP phone in the cluster, that phone is dynamically configured with (he user configurations. B. A user an define several remote destinations so that a call to the IP phone rings their mobile and home destinations simultaneously. C. A user can move the phone anywhere within the cluster its calls will be routed out the local gateway. D. A user can choose one of several wireless IP phone models for mobile IP communication throughout the WLAN coverage area. E. A user can tog into any phone in the cluster and receive a DN from a predefined range. Answer: A Get Latest & Valid 300-075 Exam's Question and Answers 4 from Real4test.com. 4
NO.4 When you configure TEHO for long-distance calls and use the local PSTN gateways as fallback, how many route patterns do you require for a cluster with five sites that are located in different area codes? A. 5 when using a local route group B. 10 when not using a local route group C. 15 when not using a local route group D. 6 when using a local route group Answer: D NO.5 You want to perform Media Gateway Control Protocol gateway maintenance. For this purpose, you disable Media Control Gateway Protocol gateway using the no mgcp command. After you perform the maintenance, you want to enable the Media Control Gateway Protocol gateway. Which command should you use? A. mgcp yes B. mgcp enable C. mgcp active D. mgcp E. activate mgcp F. enable mgcp Answer: D NO.6 A CUCM cluster has been set up with one to one (1:1) call processing redundancy. What two occurrences will seen when the primary subscriber fails? (Choose two) A. The secondary subscriber will start its TFTP service B. The secondary subscriber will start its CallManager service C. 40 SCCP phones per second will be able to register to the secondary subscriber. D. 125 SIP phones per second will be able to register to the secondary subscriber E. 40 SIP phones per second will be able to register to the secondary subscriber. F. 125 SCCP phones per second will be able to register to the secondary subscriber. Answer: E,F NO.7 Which statement is true when considering a Cisco VoIP environment for regional configuration? A. To deploy a Cisco H.323 gatekeeper, you must configure MTP resources on the gatekeeper and only use B. 711 between regions. C. G.729 requires 24K of bandwidth per call. D. G.711 requires 128K of bandwidth per call. E. The default codec does not matter if you have defined a hardware MTP in your Cisco Unified Communications Manager environment. Answer: E Get Latest & Valid 300-075 Exam's Question and Answers 5 from Real4test.com. 5
NO.8 Which three options are overlapping parameters for roaming when a device is configured for Device Mobility? (Choose three.) A. codec B. extension C. MRGL D. network locale E. location F. device pool Answer: C,D,E Explanation The overlapping parameters for roaming-sensitive settings are Media Resource Group List, Location, and Network Locale. The overlapping parameters for the Device Mobility-related settings are Calling Search Space (called Device Mobility Calling Search Space at the device pool), AAR Group, and AAR Calling Search Space. Overlapping parameters configured at the phone have higher priority than settings at the home device pool and lower priority than settings at the roaming device pool. Reference: https://supportforums.cisco.com/document/77096/device-mobility NO.9 When implementing a dial plan for multisite deployments, what must be present for SRST to work successfully? A. translation patterns that apply to the local PSTN for each gateway B. incoming and outgoing COR lists C. dial peers that address all sites in the multisite cluster D. configuration of the gateway as an MGCP gateway Answer: A NO.10 You want to avoid unnecessary interworking in Cisco TelePresence Video Communication Server, such as where a call between two H.323 endpoints is made over SIP, or vice versa. Which setting is recommended? A. H.323 - SIP interworking mode. On B. H.323 - SIP interworking mode. Registered only C. H.323 - SIP interworking mode. Variable D. H.323 - SIP interworking mode. Reject E. H.323 - SIP interworking mode. Off Answer: B NO.11 Which three tests can you perform to verify redundancy in the customer environment? (Choose three.) A. Verify that media resources fail over to a secondary subscriber server when the publisher fails. B. Verify that the H.323 redundant connection is active. C. Verify that Cisco Unified IP phones running SCCP go into SRST mode when the WAN connection is disconnected. D. Verify that HSRP is active on the Cisco Unified Communications Manager subscriber servers. Get Latest & Valid 300-075 Exam's Question and Answers 6 from Real4test.com. 6
E. Verify that all phones are registered to a second subscriber server. F. Verify that SCCP fallback is configured in Cisco Unified Communications Manager. Answer: A,C,E NO.12 Which zone will the VCS Control use to route calls to the VCS Expressway? A. neighbor zone B. DNS zone C. ENUM zone D. traversal client zone Answer: D NO.13 On which two call logs is the media encryption enforced in a Collaboration Edge design? (Choose two) A. Expressway-E to Cisco Unified Communications Manager B. Expressway-C to internal endpoint C. Expressway-C to Cisco Unified Communications Manager D. Expressway-E to outside-located endpoint E. Expressway-C to Expressway-E Answer: D,E NO.14 Which command does an engineer execute to find out the Cisco Unified Communications Manager database replication status in CLI? A. utils dbreplication rebuild B. utils dbreplication clusterrest C. utils dbreplication quickaudit D. utils dbreplication runtimestate Answer: D Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/cli_ref/9_1_1/ CUCM_BK_C6AE17AA_00_cucm-cli-reference-guide-91/CUCM_BK_C6AE17AA_00_cucm-clireferencegui NO.15 In which two locations can you verify that a phone has a standby Cisco Unified communications manager? (Choose two) A. phone webpage B. Cisco Unified Serviceability C. RTMT D. phone menu Answer: A,D NO.16 Which statement about configuring the Cisco VCS Control and Cisco VCS Expressway is true? A. The Cisco VCS Expressway is the Traversal Server. B. The username on the Cisco VCS Control and Cisco VCS Expressway are local and do not need to Get Latest & Valid 300-075 Exam's Question and Answers 7 from Real4test.com. 7
match. C. You do not need to configure search rules for traversal calls. D. You need to configure the firewall to allow communication from the Cisco VCS Expressway to the Cisco VCS Control. Answer: A NO.17 When implementing a Media Termination Point, what determines the number of sessions that is supported on each DSP? A. the Cisco Unified Communications Manager node setting B. the size of the cluster that is being designed C. the number of full-duplex media streams D. the codecs that are used in universal transcoding mode Answer: D NO.18 Where do you specify the device mobility group and physical location after they have been configured? A. locale B. MRGL C. device mobility CSS D. DMI E. phones F. device pool Answer: F NO.19 Scenario: There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone. The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows. SX20 System information: Get Latest & Valid 300-075 Exam's Question and Answers 8 from Real4test.com. 8
DX650 Configuration: MRGL: DP: Locations: Get Latest & Valid 300-075 Exam's Question and Answers 9 from Real4test.com. 9
AARG: CSS: Movi Failure: Movie Settings: Get Latest & Valid 300-075 Exam's Question and Answers 10 from Real4test.com. 10
Which device configuration option will allow an administrator to assign a device to specific rights for Get Latest & Valid 300-075 Exam's Question and Answers 11 from Real4test.com. 11
making calls to specific DNs? A. Device Pool B. Media Resource Group List C. Calling Search Space D. Location E. AAR Group Answer: C NO.20 How can you configure VCS Expressway to make sure an external caller cannot reach a specific internal address? A. You add a search rule to block any call to the specific URI on the internal VCS Control. B. You block the call with search rule that has a high priority in the VCS Expressway. You make a transform on the VCS Expressway to direct the call to VCS Control, which can block the call. C. You add the specific URI in the firewall section of the VCS Expressway and block it. D. VCS Expressway only forwards calls to Cisco Unified Communications Manager who block calls. Answer: D Get Latest & Valid 300-075 Exam's Question and Answers 12 from Real4test.com. 12