DVD Player for TXA-910DVD 1. Function explanation Keys Explanation Panel Remote When this key is pressed during stop, play will start. When this key is pressed during CD or DVD is playing. PLAY/PAUSE then it is changed to pause. When this key is pressed during CD or DVD is pausing. then it is changed to play. When this key is pressed during playing, the set is changed to stop. STOP The stop point is memorized. Then pressing PLAY/PAUSE key, the set will play from the stop point. When this key is pressed twice during playing. The set is changed to stop, then pressing PLAY/PAUSE key, the set will play from the beginning. FUNC When this key is pressed, mode is changed between USB and disk. In play state,press CUE key to carry out the fast play. Every press the key,the play speed will change for one time X2,X4,X8,X20 and normal in seguence. In play state,press this key to carry out the fast backward play. Every press the key, the backward play speed will change for one time. X2,x4,X8,X20 and normal in seguence. N/P Press the key to change the TV sysetem in the following seguence: PAL AUTO NTSC EJECT Press this key, the disk will move out. If the disk does not took away, press this key again, the disk will slot in. The defult is REPEAT ALL. IN MP3 WMA state,the repeat seguence is as following: REPEAT 1 REPEAT DIR REPAT ALL REPEAT In CD playing state, the repeat seguence is as following: REPEAT 1 REPEAT ALL After programming, the player will play the title, chapter or songs follow the programmed order. Press PROG button,the menu will display on the screen as following: PROGRAM PROG T C T C T C T C 1--:-- 5--:-- 9--:-- 13--:-- 2--:-- 6--:-- 10--:-- 14--:-- 3--:-- 7--:-- 11--:-- 15--:-- 4--:-- 8--:-- 12--:-- 16--:-- play clear
In the picture T means TITLE, C means CHAPTER. The divided unit of DVD disc is title,and can divide the title for several chapters. Usually one movie has one title. Some disc are not divided in this way, please pay attention to it when operate GOTO and PROG function. Input relevant title, chapter that you want with the arrows and number keys. Use to move the cursor to PLAY in the picture above, then press ENTER button.the player will start playing follow the programmed order. Also use the same way to move the cursor to CLEAR and press ENTER button, can clean the programmed order. Press PROG key again will exit the program mode. MUTE When this key is pressed during disc is playing, the set will mute the audio output. Press again will recovery the output. option POWER Power sw of the set. GOTO Press GOTO to reach the title, chapter or time you want. OSD In play state, Press OSD key, the play information of the disc will show on the screen. Press it again, the OSD information will disappear. PBC The key only act for VCD disc. AUDIO In play state, Press AUDIO key can choose different audio channels in the DVD disc. ZOOM In play state, press ZOOM key,the display screen will zoom by 2X, 3X, 4X, 1/2X, 1/3X, 1/4X and normal play. Press SLOW key,the set will become slow motion as following cycle: SLOW SF 1/2 SF 1/3 SF 1/4 SF 1/5 normal SF 1/7 SF 1/6 Cursor move keys and confirm keys. ENTER Press one of these keys will skip to the next track,long press one of these keys will search forward or backward. Press ANGLE key to choose different angles of the disc that recorded ANGLE with multi-angle. It is not useful when the DVD disc doesn t support multi-angle. RANDOM When this key is pressed, it will becomes random play mode. SUB-T In play state press SUB-T button to choose the different subtitles in the DVD disc. SETUP Press SETUP key to enter setup manual. TITLE Press TITLE key the screen will show title and manual for selection. VOL.- When this key is pressed, the volume will decrease by 1dB per step, the min. volume is 0dB. VOL.+ When this key is pressed, the volume will increase by 1dB per step, the max. volume is 40dB. 0~9;10+ You can use these keys to select the track you want directly. REV-SKIP - CUE
2. Basic specifications Items Product type Disc loading Specifications Digital Video Disc system with mechanic & electronic anti-shock CD,CD-R, CD-R/W, VCD, DVD, DVD-R, DVD-RW, MP3, WMA, MP4, JPG, USB/ SD CARD WMA, MP3, MP4 available. Slot-in Type Supply voltage DC 12V (10~14V) Power consumption Within 7W Dimensions Weight (approximate) 174mm(W) 153mm(D) 51.4mm(H) 1.1kg 3. Electrical Item performance for audio CDS Items Condition Specifications 1. Output level 1KHz 0dB 1.2V ±2dB 2. Output level difference between channels 1KHz 0dB Less than 2dB 3. Frequency response (using 1KHz 0dB as reference) 20Hz - 20KHz ±4dB 4. Separation 1KHz More than 60dB 5. THD 1KHz Less than 0.5% 6. S/N ration 1KHz More than 80dB * Addition: regarding items 4, 5 use 20KHz low-pass filter. Regarding item 6 use 20KHz low-pass filter and IHF-A curve filter.
4. Electrical performance for video CDS Items Specifications Composite video signal 1.0±0.2V 1 Signal level output level Line synchronous level 0.3±0.05V 2 Line resolution for video output (TV line) 450
MONACOR INTERNATIONAL GmbH & Co. KG Zum Falsch 36 28307 Bremen Germany Copyright by MONACOR INTERNATIONAL. All rights reserved. A-0000.99.01.02.2012