Description The LFS-LAL large area light is the first of its kind in Lumecon s LED Fire Series. Combining a sleek fixture design with energy efficient performance allows this fixture to be used in parking lots, roadways, pathways and general area lighting applications replacing existing fixtures up to 1,000W HID one-for-one. Performance Data Model Watts Equiv (Type IV) (Type III) (Type II) (Type IV) (Type III) (Type II) LFS-LAL-285 Dimensions & Weights Delivered Lumens Efficacy 160W 400W HID 21,508 Lm 134 LPW 159W 400W HID 21,467 Lm 135 LPW 158W 400W HID 20,000 Lm 127 LPW 161W 400W HID 21,777 Lm 136 LPW 245W 1,000W HID 30,373 Lm 124 LPW 242W 1,000W HID 30,920 Lm 128 LPW 236W 1,000W HID 28,803 Lm 122 LPW 243W 1,000W HID 31,726 Lm 130 LPW 278W 1,000W HID 32,611 Lm 117 LPW Model Width Height Length Weight LFS-LAL 15 1/4 5 7/8 22 30 lbs. Technical Specifications Input Voltage: 120-277V or 347-480V. Housing: Die cast aluminum housing and front frame with textured architectural bronze powder coat finish over a chromate conversion coating. Housing features an integrated heat sink and driver compartment built into the fixture design. Optional photocell accessory available. Lens: Tempered clear glass lens. Mounting: Mounting arm designed for a square / round pole (standard). Additional mounting options include a pole mounting arm adaptor. Effective Projected Area (EPA): 0.67ft² (0.84ft² with arm) Color Temperature: 3000K WW, 4000K NW (standard), 5000K CW. LED Lifetime: All LED s are rated for a minimum of 100,000 hours of continuous operation at ambient temperatures from -40 F/-40 C to 95 F/35 C. Color Rendering Index (CRI): Minimum of 70 or higher. CRI 80+ or 90+ available upon request. Dimming: 0-10V standard dimming capability. Surge Protection: Thermally protected 20kA/ 40kV varistor type surge suppressor is included and meets ANSI C136.2-2015: Extreme Level. Also meets IEC61643-11 Class II / EN61643-11 Type 2, and US Dept of Energy MSSLC Model Spec for surge protection. The device is wired in series with the luminaire input power in order to interrupt power to the luminaire when consumed, protecting the LED power supply and circuit boards from additional electrical surges. Lumecon ETD System: The enhanced thermal dissipation system engines are thermally bonded to provide maximum thermal dissipation to the exterior of the fixture to ensure long life. To protect the light engine panel from moisture and corrosion, the LED light engine panel is uniformly coated with a UV stabilized acrylic polymer resin that meets MIL and ASTM dielectric standards, UL, and IPC standards for flammability, moisture resistance and thermal shock. Certification Data: CSA Listed to UL 1598, UL 8750 and CSA 22.2 No. 250 for Wet Locations. *Full compliance and test documentation is available for TM-21, LM-79, LM-80, ETL Listing to UL1598 and UL 8750. DesignLights Consortium (DLC) Qualified Product: Unless noted, not all versions of this product may be DLC qualified. For a complete list of Lumecon DLC Qualified Products visit: www.designlights.org. Manufacturing Origin: US Manufactured and Assembled. Buy American: Meets Buy American requirements within the ARRA. Warranty: 10 Year L70 performance based warranty. For full warranty terms, please visit our website: www.lumecon.com
Ordering Information LFS-LAL Options / Ordering Example: -DB-T5-C-1-NW-MAS-X-X WATTAGE COLOR DISTRIBUTION LENS VOLTAGE COLOR TEMPERATURE 160-160 Watts 240-240 Watts 285-285 Watts* *285 only available in T5 and 120/277V DB - Dark Bronze CC - Custom Color T5 - Type V T4 - Type IV T3 - Type III T2- Type II C - Clear Glass 1-120v - 277v 2-347 - 480v NW - Neutral CW - Cool WW - Warm MOUNTING METHODS PHOTOCELL (Not Available in 285 Watt Version) OCCUPANCY SENSOR ACCESSORIES MAS - Mounting Arm (Square Pole)* MAR - Mounting Arm (Round Pole)* PM - Pole Mount Arm Adaptor* SB - Swivel Bracket SF - Slip Fitter Y - Yoke *Designed to mount to a 4, 5 or 6 pole X - None R - Receptacle Only RS - Receptacle Only with Shorting Cap 7P - Seven-pin Twist Lock Photocell Receptacle Only (controls by others) PC1-120v - 277v Twist Lock Photocell* PC2-347v - 480v Twist Lock Photocell* * Includes receptacle X - None OC1 - On/Off OC2 - Dim/High LFS-LAL Wire Guard LFS-LAL Glare Shield If OCC Sensor Option is selected, mounting height specifications need to be clarified: Mounting height between 0-10 Mounting height between 10-20 OCC Sensor Patterns Mounting height over 20 + Option Samples LFS-LAL Mounted Arm (Square) LFS-LAL Mounted Arm (Round) LFS-LAL Pole Mount (Arm Adaptor) LFS-LAL Swivel Bracket LFS-LAL Slip Fitter LFS-LAL Yoke Mount LFS-LAL Wire Guard LFS-LAL Glare Shield
Photometric Data For.ies files of this product, please visit the downloads tabs on the LFS-LAL product page: http://lumecon.com/products/lfs-lal-large-area-light/ -T5 -T4 -T3 -T2 -T5 -T4 -T3 -T2 LFS-LAL-285-T5
Photometric Illustration For.ies files of this product, please visit the downloads tabs on the LFS-LAL product page: http://lumecon.com/products/lfs-lal-large-area-light/ -T3 -T5 -T2 -T3 -T5 -T2 LFS-LAL-285-T5
Performance Data ELECTRICAL LOAD DATA AC Current Load (A) Fixture Model Drive Current (ma) System Watts (W) 120V 277V 350 160.55 1.49 0.64 350 244.66 2.27 0.98 LFS-LAL-285 420 278.38 2.58 1.12 LUMEN MAINTENANCE Data in the table below references projected performance in a 25 C ambient and is based on 10,000 hours of LED testing. Performance data has been tested per IESNA LM-80-08 and projected per IESNA TM-21-11. Use the lumen maintenance factor that corresponds to the desired number of operating hours below to calculate LLF. Lumen Maintenance Factors @ 25 C, by hours: Fixture Model 0 25,000 50,000 70,000 100,000 1.0 0.93 0.87 0.83 0.76 1.0 0.93 0.87 0.83 0.76 LFS-LAL-285 1.0 0.90 0.83 0.77 0.70