Xitanium LED driver Datasheet Xitanium LED drivers linear LV isolated FO Offering flexibility and differentiation opportunities Xitanium LED drivers are designed to operate LED solutions for general lighting application such as linear lighting for office and industry applications. Flexibility and differentiation possibilities in luminaire design is assured thanks to application-oriented operating windows. High reliability underpinned by 5 year warranty is enhanced by specific features that protect the connected LED module, e.g reduced ripple current and thermal derating. Most drivers feature central D operation. enefits Features Application Flexibility and differentiation Application oriented operating windows office, industry and retail opportunities Freedom of interchangeability by addressing market standards Assurance of camera and scanner friendly performance Flicker- and noise free diing One-stop shop for OEMs LEDset addressing the new interface standard for LED modules and LED drivers real 21 height Low ripple output current (4) Amplitude modulation (AM) diing of Touch & DALI LED drivers omplete portfolio offering: Power ratings: 17W, 36W, 75W, 110W and 150W isolated and non-isolated drivers DALI prograable DALI, 1-10V diable fixed output versions Industry extreme (ixt) versions available
Electrical input data Rated input voltage range 220...240 Vac Performance range Rated input voltage 230 Vac Rated input frequency range 50...60 Hz Performance range Rated input current 0.2 A Rated input power 41 W Power factor 0.9 Total harmonic distortion 20 Efficiency 88 Rated input voltage D range 186...250 Vdc Performance range Rated input current D range 0.18 Adc Performance range Input voltage A range 202...254 Vac Operational range Input frequency A range 47.5...63 Hz Operational range Input voltage D range 168...275 Vdc Operational range Isolation input to output SELV Electrical output data Regulation method onstant urrent Output voltage 27...54 Vdc Output voltage max. 60 V Peak voltage at open load Output current 0.3...1 A Full output current setting Output current tolerance ±5 Output current ripple LF 4 Output current ripple HF 15 Output power 11...37 W Full output ontrol method Fixed Galvanic Isolation Ripple = peak / average Electrical data controls input Logistical data Product name Order code 871869646887600 Logistic code 12N 9290 009 58706 EAN3 8718696468883 Pieces per box 24 2/8
Wiring & onnections Input wire cross-section 0.5...1.5 2 WAGO744, solid wire 16...20 AWG WAGO744, solid wire Input wire strip length 8...9 Output wire cross-section 0.5...1.5 2 WAGO744, solid wire 16...20 AWG WAGO744, solid wire Output wire strip length 8...9 Maximum cable length 4000 Total length of wiring including LED module, one way Insulation Insulation input input output LEDset housing Re-inforced Re-inforced output Re-inforced LEDset Re-inforced housing 3/8
Dimensions and weight Length (A1) 360 Width (1) 30 Height (1) 21 Fixing hole diameter (D1) 4.1 Fixing hole distance (A2) 350 Weight 250 gram Operational temperatures and humidity Ambient temperature -20...+50 Higher ambient temperature allowed as long as Tcase-max is not exceeded. Tcase-max 75 Maximum temperature measured at Tcase-point Tcase-life 75 Measured at Tcase-point Maximum housing temperature 110 In case of a failure Relative humidity 10...90 n-condensing Ambient temperature -25...+85 Relative humidity 5...95 Storage temperature and humidity 4/8 n-condensing
Lifetime Driver lifetime 50,000 hours Measured temperature at Tcase-point is Tcase-life. Maximum failures = 10 Mains switching cycles > 100,000 switches See Design-in guide for detailed explanation Remark Set output current (AO) LEDset See Design-in guide. Default output current: 300 ma LED module temperature derating (MTP) onstant Lumen Over Lifetime (LO) D emergency diing (DemDIM) orridor mode Energy metering Diagnostics Remark Prograable features Features Open load protection Yes Automatic recovering Short circuit protection Yes Automatic recovering Over power protection Yes Automatic recovering Hot wiring Suitable for fixtures with protection class I and II per IE60598 ertificates and standards Approval marks E / ENE Ingress Protection classification 20 5/8
Inrush current Inrush current Ipeak 13 A Input voltage 230V Inrush current Twidth 270 µs Input voltage 230V, measured at 50 Ipeak Drivers / M 16A type 24 pcs M Rating Relative number of LED drivers 10A 63 13A 81 16A 100 (stated in datasheet) 20A 125 25A 156 10A 104 13A 135 16A 170 20A 208 25A 260 Driver touch current / protective conductor current Typical touch current (ins. lass II) < 0.3 ma peak Acc. IE61347-1. LED module contribution not included Mains surge iunity (diff. mode) 1 kv Acc. IE61000-4-5. 2 Ohm, 1.2/50us, 8/20us Mains surge iunity (co. mode) 2 kv Acc. IE61000-4-5. 12 Ohm, 1.2/50us, 8/20us Surge iunity 6/8
Graphs Operating window Power factor versus output power Efficiency versus output power 7/8
THD versus output power 2017 Philips Lighting Holding.V. All rights reserved. This document contains information relating to the Philips Lighting portfolio, intended for companies who may be interested in developing their product offering. te that the information provided is subject to change. Philips Lighting does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any coercial offer and does not form part of any quotation or contract. Date of release: October 9, 2017 v3 www.philips.com/technology