NEW PP PRODUCT LAUNCH SABIC PP FLOWPACT FPC45

NEW PP PRODUCT LAUNCH SABIC PP FLOWPACT FPC45

SABIC PP FLOWPACT FPC45 IN A NUTSHELL FPC45 new member in the FLOWPACT family fr rigid packaging FLOWPACT FPC45 is PP impact cplymer (blck cplymer) MFR = 45 g/10min Nucleated and antistatic High stiffness Gd rganleptics Ptential faster cycle time Istrpic perfrmance N. 1

Tensile Mdulus (MPa) SABIC PP FLOWPACT FPC45 BENCHMARKING 1800 1700 Flwpact FPC45 benchmarking (MFR 30-60) (based n datasheet values) FPC45 1600 1500 FPC55 1400 1300 412MN40 612MK46 1200 2 4 6 8 10 12 Charpy impact @23 C (KJ/m²) FLOWPACT FPC45 - gd perfrmance vs market references Superir stiffness/impact balance dwngauging pssibilities Gd perfrmance fr ht filling applicatins N. 2

Tp lad (N) SABIC PP FLOWPACT FPC45 TOP LOAD 4600 Tp lad 5L Fd cntainer 4200 3800 3400 3000 Benchmark 1 Benchmark 2 Benchmark 3 SABIC PP 612MK46 SABIC PP FPC45 FLOWPACT FPC45 Higher tp lad ptentially higher stackability, that enables mre flexibility n transprtatin and strage! N. 3

SABIC PP FLOWPACT FPC45 TOP LOAD SIMULATION Tp lad simulatin linear mdel 10L bucket 612MK46 E-md: 1.400MPa FPC45 E-Md: 1.700MPa Lid 1,1mm wall thickness 1,2mm wall thickness Displacement simulatin after tp lad pressure N. 4

Tp Lad SABIC PP FLOWPACT FPC45 TOP LOAD SIMULATION 3,0 2,5 323g 2,0 323g 293g 1,5 1,0 612MK46 1,20mm FPC45 1,20mm 13% lwer FPC45 1,05mm SABIC PP FLOWPACT FPC45 higher Tp Lad ptentially lighter packaging! N. 5

SABIC PP FLOWPACT FPC45 Prduct features: Pssibility f less packaging material ptential thinner walls High stackability (lwer transprtatin/strage cst) expected higher tp lad/stiffness Lwer prcessing cst ptential shrter cycle times Dimensinal stability lw warpage - same perfrmance in all directins (istrpic) Pssible slutin fr ht fill applicatins expected higher stiffness at higher temperatures Design freedm fr packaging gd mechanical prperties balance, ptentially allw wider design windw pprtunities SABIC FLOWPACT FPC45 a slutin fr rigid packaging! N. 6

Thank yu! N. 7

DISCLAIMER The prducts and services f SABIC are sld and rendered subject t SABIC s standard terms & cnditins f sale (GTCS), which are available free f charge upn request, by pst r digital. Standard terms & cnditins ther than the GTCS are dismissed and d nt apply. Althugh any infrmatin r recmmendatin cntained herein is given in gd faith, SABIC makes n warranty r guarantee, express r implied, (i) that the results r specificatins described herein will be btained under end-use cnditins, r (ii) as t the effectiveness r safety f any design incrprating SABIC s prducts, services r recmmendatins. This presentatin r dcument des nt cntain any calculatin, estimate r ther warranty r representatin that custmers and third parties may rely n. Custmers and third parties are respnsible fr making their wn determinatin as t the suitability f SABIC s prducts, services r recmmendatins fr the custmers particular intended use thrugh apprpriate end-use testing and analysis, and cmpliance with applicable laws and regulatins. Except as prvided in SABIC S GTCS, SABIC shall nt be respnsible fr any lss r damage resulting frm any use f its infrmatin, prducts r services described herein and SABIC assumes n liability whatsever in this respects. Nthing in any dcument r ral statement shall be deemed t alter r waive any prvisin f SABIC s GTCS r this Disclaimer, unless it is specifically agreed t in a writing signed by SABIC. N statement by SABIC cncerning a pssible use f any SABIC prduct, service r design is intended, r shuld be cnstrued, t grant any license under any patent r ther intellectual prperty right f SABIC r as a recmmendatin fr the use f such prduct, service r design in a manner that infringes any patent r ther intellectual prperty right. N. 8