Xitanium LED driver Datasheet Xitanium LED drivers linear HV non-isolated Enabling future-proof LED technology Xitanium LED drivers are designed to operate LED solutions for general lighting applications such as linear lighting, as well as down lighting and spot/accent lighting. Reliability is enhanced by specific features that protect the connected LED module, e.g. hot wiring, reduced ripple current and thermal de-rating. Most drivers feature central D operation. In the coming years LEDs will continue to increase in efficiency, creating generation and complexity challenges for OEMs. With Xitanium LED drivers, flexibility in luminaire design is assured thanks to an adjustable output current. pplication-oriented operating windows offer the flexibility required to provide the stable lumen output and light quality levels that lighting specifiers and architects demand. enefits Features pplication High reliability underpinned by 5 year Up to 95 efficiency, lowest cost and 17W, 36W and 75W LED drivers for warranty Future-proof flexibility - smallest dimensions Operating windows - output current office applications 110W and 150W LED drivers for application-oriented operating can be adjusted via the Philips industry, warehouses, public areas, windows enable LED generation and MultiOne configurator (TD drivers) distribution centers and shopping or with a resistor outside the driver malls complexity management ompatibility - adjustable output current enables operation of various LED solutions from different manufacturers or OEM own designs Flicker and noise free diing with all Reduced ripple current and thermal de-rating for increased reliability Multiple versions - DLI diable & prograable, 1-10V diable, and fixed-output; Touch and DLI LED drivers due to ll T5 form factors but various lengths amplitude diing (M) Longer life time (100khrs), improved surge and burst (4kV) and Tambient (-40 to +60 ) specifications
Electrical input data minal input voltage 220...240 Vac performance range minal input frequency 50...60 Hz minal input current 0.35 Input voltage 220 Vac minal input power 80 W Power factor 0.9 Total harmonic distortion 20 @ full load. See graph. Efficiency 92 @230V @ full load minal input voltage D 186...250 Vdc minal input current D 0.37 Input voltage 220 Vdc, full load Input voltage 202...254 Vac Operational range Input frequency 47.5...63 Hz Maximum permissible range Input voltage D 168...275 Vdc Maximum permissible range Regulation method onstant urrent Output voltage 100...220 Vdc Output voltage max. 330 V Peak voltage at open load Output current 0.12...0.4 Full output current setting Output current tolerance ±5 Output current ripple LF 4 Ripple = peak / average Output power 21...75 W Full output ontrol method Fixed @230V @ full load @230V @ full load @ full load. See graph. Electrical output data Electrical data controls input Logistical data Product name Order code 871869644002500 Logistic code 12N 9290 009 50706 EN3 8718696440032 Pieces per box 24 2/7
Wiring & onnections Input wire cross-section 0.5...1.5 2 WGO744, solid wire 16...20 WG WGO744, solid wire Input wire strip length 8...9 Output wire cross-section 0.5...1.5 2 WGO744, solid wire 16...20 WG WGO744, solid wire Output wire strip length 8...9 Maximum cable length 4000 Total length of wiring including LED module, one way Insulation Insulation input output input n output n Dimensions and weight Length (1) 280 Width (1) 30 Height (1) 21 Fixing hole diameter (D1) 4.1 Fixing hole distance (2) 265 Weight 185 gram 3/7
Operational temperatures and humidity mbient temperature -20...+50 º Tcase-max 75 º Maximum temperature measured at Tc-point Tcase-life 75 º Measured at Tc-point Maximum housing temperature 110 º In case of a failure Relative humidity 10...90 n-condensing Storage temperature and humidity mbient temperature -25...+85 º Relative humidity 5...95 n-condensing Driver lifetime 50,000 hours Measured temperature at Tc-point is Tcase-life. Lifetime Maximum failures = 10 Prograable features Remark Set output current (O) LEDset See Design-in guide. Default output current: 120 m Remark LED module temperature derating (MTP) onstant Lumen Over Lifetime (LO) D emergency diing (DemDIM) orridor mode Energy metering Diagnostics Features Open load protection Yes utomatic recovering Short circuit protection Yes utomatic recovering Over power protection Yes utomatic recovering Hot wiring Suitable for fixtures with protection class I 4/7 per IE60598
ertificates and standards pproval marks / E / ENE Ingress Protection classification 20 Inrush current Inrush current Ipeak 19 Input voltage 220V Inrush current Twidth 280 µs Input voltage 220V, measured at 50 Ipeak Drivers / M 16 type 24 pcs M Rating Relative number of LED drivers 10 63 13 81 16 100 (stated in datasheet) 20 125 25 156 10 104 13 135 16 170 20 208 25 260 Driver touch current Typical touch current 0.3 m peak cc. IE61347-1. LED module contribution not included Surge iunity Mains surge iunity (diff. mode) 1 kv cc. IE61000-4-5. 2 Ohm, 1.2/50us, 8/20us Mains surge iunity (co. mode) 2 kv cc. IE61000-4-5. 12 Ohm, 1.2/50us, 8/20us 5/7
Graphs Operating window Power factor versus output power Efficiency versus output power 6/7
2015 Koninklijke Philips Electronics N.V. ll rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Data subject to change. Date of release: June 11, 2015 www.philips.com/technology