Date: Quantity: Company: Project: Mesh RGB The Mesh unit comprises eight grid-elements, connected by flexible joints, giving it the ability to contour the most demanding surfaces. Each Mesh unit has 160 (5 x 32) individually controllable pixels. The control possibilities range from DMX and e:pix over DVI and its IP67 rated UVresistant material makes it suitable for a variety of outdoor applications. Product Specifications Light Source Color Range Color Resolution Viewing Angle 120 Luminous Flux Efficacy 160 (5 x 32) High intensity Nichia SMT LEDs 16.7 Million additive RGB colors 3 x 14-bit (Gamma correction) 113 lm (1 x Mesh grid; 1/8 x Mesh unit) 12.4 lm/w LED Pitch 62.5mm / 2.46 Luminance Housing Adjustment Options Dimensions (W x H x D) Weight Regulatory Listing & Safety Approval Operating Temperature Storage Temperature Environment Humidity 0 to 90% 600 cd/m 2 (nits) - (1 x Mesh grid; 1/8 x Mesh unit) Polycarbonate molding (CAST-UV protected) Grid sections (5 x 4 matrix) on hinge 296 x 2008 x 16mm 11.65 x 79 x 0.64 4.2kg / 9.2lbs (Mesh unit: 3kg/6.6lbs; Pixel distributor: 0.9kg/1.98lbs; Mounting wires: 0.3kg/0.66lbs) CE, FCC, cetlus, AAMA 501.1-05 20 C to 50 C ( 4 F to 122 F) 20 C to 70 C ( 40 F to 158 F) Outdoor (Mesh Unit - IP67 rated; - IP66 rated) Electrical Specifications Operating Voltage Power Consumption 24V DC 98W max. ( and Mesh Unit) System Specifications Power/Data Interface Control Power Supply Addressing Options TX CONNECT Smart DMX512 / e:pix LED Engine Smart 150W Indoor / Outdoor Auto-Addressing LED CHARACTERISTICS Because LEDs are semiconductor devices, their performances are subject to inherent variability commonly found in semiconductor industry. To improve consistency in performance across the same product, LED manufacturers sort LEDs into bins according to different preset parameters, such as forward driving voltage, illumination, etc. Whereas binning is a sorting function, it is not a correction process. Inherent variability in the manufacturing process results always in different binning distributions according to different production lots. Traxon uses automatically binned LEDs on its products, thereby minimizing output variations within the model range. As with all electronic devices, LED output degrades over time a term called lumen depreciation. This also explains why it is nearly impossible to expect photometric performances of two LED products with different service life spans to be the same. The rate of LED degrade is a complicate function of many factors such as operating efficiency, duration of continuous operation, and more significantly, environmental conditions (ambient temperature for example). If allowed working under optimal operating temperature range and with good ventilation, LED devices enjoy long service lives over conventional light sources. When using/installing LED devices, care should be taken to ensure that the devices will operate within the operating conditions specified in respective product literature. Lumen measurement compiles with LM-79-08 standard. Lumen maintenance is calculated based on LM-80 compliant measurement. Product Specification 05/16 V2.3 1 of 10
Photometrics Candela Distribution +/-180-90 90 10 Light Output Color Luminous Flux (lm) Power (Watts) Efficacy (lm/w) White 113 9.1 12.42 Red 36.5 3.2 11.41 Green 64 3.2 20.00 Blue 19.6 3.2 6.13 Luminance: 600 cd/m 2 (nits) 20 30 40 0 Measured on: White Beam angle (50% Imax): 118.3 Illuminance Distance 10cm/3.9 25cm/9.8 50cm/9.7 75cm/29.5 100cm/39.4 Lux 3751 600 150 67 38 50% lmax (diameter) 33cm/13.0 84cm/33.1 167cm/65.7 251cm/98.8 335cm/131.9 Measured on: White Illuminance at a Distance 1.0 0.8 ISO-Illuminance Unit: [lx] 0.6 0.4 0.2 0 0 2.0 0.2 1.5 0.4 0.6 1.0 0.8 0.5 1.0 1.0 0.8 0.6 0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 Coordinate Scale: d/h Height: 4 m Max. Illuminance: 2.34 lx Photometric measurements are carried out by an independent laboratory. IES and LDT files are available for download from the Traxon website. Product Specification 05/16 V2.3 2 of 10
Dimensions 62.50mm/2.46 31.25mm/1.23 62.50mm/2.46 62.50mm/2.46 296mm/11.65 62.50mm/2.46 (typ.) 62.50mm/2.46 2007.95mm/79.05 251mm/9.88 56.50mm/2.22 19.27mm/0.76 296mm/11.65 Product Specification 05/16 V2.3 3 of 10
Dimensions 321.60mm/12.66 290mm/11.42 89.80mm/3.54 99.30mm/3.91 312.50mm/12.30 56.50mm/2.22 77.80mm/3.06 Mount Wire (2x) 2500mm/98.4 50mm/2 (2x) ø2mm/0.08 Stainless Steel Wire 50mm/2 (2x) 8 pairs wire lock stopper assy End Loop (2x) Product Specification 05/16 V2.3 4 of 10
Mounting Stainless steel wire mounted behind Mesh unit mounted above Mesh unit mounted above back-to-back Mesh units Product Specification 05/16 V2.3 5 of 10
System Diagram System Diagram - Outdoor System INDOOR OUTDOOR Butler S2 TX Connect Data Indoor/Outdoor Bridge Cable (5m/16.4ft) A TX Connect Data Butler S2 Indoor/Outdoor Bridge Cable (5m/16.4ft) DMX/RDM Output Engine CONTROLLER 512 DMX Channels per output C LED Engine Smart 150W Outdoor AC 110V/220V 50/60Hz CABLING LENGTHS A to B: 100 meters CONTROLLER to FIXTURE. C to D: 35 meters POWER SUPPLY to FIXTURE. To construct a longer Data Bridge Cable, use Indoor Data Cable and Outdoor RJ45 Housing. RJ45 Male Connector Housing IP67 TX Connect Smart Outdoor Interconnection Cable 5m/16.4ft, 15m/49.2ft and 30m/98.4ft available To additional unit. B D (Included with Mesh RGB) Dot Pitch: 62.5mm/2.46 Mesh/String Lead Extension Cable (2.5m/8.2ft) (Max. 2 extensions per lead) 32 Dots 1937.5mm/76.28 Dot Pitch: 62.5mm/2.46 Mesh RGB 5 Dots Product Specification 05/16 V2.3 6 of 10
System Diagram System Diagram - Indoor System Butler S2 Butler S2 DMX/RDM Output Engine A CONTROLLER 512 DMX Channels per output AC Power Cord AC 110V/220V 50/60Hz CABLING LENGTHS A to B: 100 meters CONTROLLER to FIXTURE. C to D: 35 meters POWER SUPPLY to FIXTURE. TX Connect Data Indoor/Outdoor Bridge Cable (5m/16.4ft) TX Connect Data Indoor/Outdoor Bridge Cable (5m/16.4ft) C LED Engine Smart 150W Indoor Product also includes 1x 30cm TX Connect Smart Interconnection Cable INDOOR OUTDOOR Mesh/String Lead Extension Cable (2.5m/8.2ft) (Max. 2 extensions per lead) To additional unit. TX Connect Smart Indoor/Outdoor Bridge Cable (5m/16.4ft) (Included with Mesh RGB) B D 32 Dots 1937.5mm/76.28 Dot Pitch: 62.5mm/2.46 Mesh RGB Dot Pitch: 62.5mm/2.46 5 Dots Product Specification 05/16 V2.3 7 of 10
System Diagram System Diagram - Outdoor System controlled by VMC A Use this cable to extend the LED Engine output cable to the Mesh unit. 60 PIXELS (12 MESH UNITS) Use this RJ45 connector housing to construct a longer Data Indoor/Outdoor Bridge Cable. RJ45 Male Connector Housing IP67 (DE.AC.0100000) C 1440 channels (3 x 480 ch) configured for each VMC output D TX Connect Data Outdoor Cable (DE.IC.0060000) 0.6m/1.97ft (DE.IC.0300000) 3m/9.84ft Mesh RGB (DO.MA.7014000) Video Micro Converter (VMC) 160185 Configured to grab 3840 pixels from DVI input. (Max. 4096.) ONE MESH RGB UNIT IS POWERED BY ONE LED ENGINE SMART 150W OUTDOOR. UP TO 3 MESH RGB UNITS CAN BE DAISY This wiring diagram shows only typical connections. Actual wiring depends on configuration of Mesh RGB units and installation. CHAINED PER VMC OUTPUT. CABLING LENGTHS DVI Source A to B: 100 meters CONTROLLER to FIXTURE. C to D: 35 meters POWER SUPPLY to FIXTURE. B 64 PIXELS (2 MESH UNITS) Configuration via Ethernet DVI IN (DVI-D/DVI-I) DVI OUT LCE2 fx Product Specification 05/16 V2.3 8 of 10 utor sh RGB) TX Connect Smart Outdoor Interconnection Cable Installation engineer should use appropriate 5m/16.4ft,15m/49.2ft and 30m/98.4ft available LED Engine Smart 150W Outdoor plugs for outdoor AC connection. TX Connect Data Indoor/Outdoor Bridge Cable (DE.AC.0000100) 5m/16.4ft
Ordering Fixtures DO.MA.7014001 Mesh RGB AA558850055 Standard Accessories (Included in Delivery) N/A 1x, 2x Mounting Brackets, 2x Mounting Wire + Stoppers, 2x ST Screws, 16x Screws (back-to-back mounting) N/A Optional Accessories DO.AC.0001500 Stainless Steel Wire, 10m AA612520055 DO.AC.0001700 16x Steel Wire Stoppers AA533150055 TX Control EN.LC.9300000 LCE2 AA629450035 EN.LC.9400000 LCE2 fx AA629460035 EN.BU.0000001 Butler S2 AB436200031 160185 Video Micro Converter (DMX/e:pix) AA438940235 Product Specification 05/16 V2.3 9 of 10
Ordering TX Connect DO.AC.0000700 Mesh/String Lead Extension Cable, 2.5m/8.4ft AA556160155 TE.AC.0000100 TX CONNECT Smart Indoor/Outdoor Bridge Cable, 5m/16.4ft AA438890055 DE.AC.0000100 TX CONNECT Data Indoor/Outdoor Bridge Cable, 5m/16.4ft AA508850055 TI.EC.0100000 TX CONNECT Smart Extension Cable, 1m/3.28ft A6342330055 TI.EC.0300000 TX CONNECT Smart Extension Cable, 3m/9.84ft A6342410055 TI.EC.0500000 TX CONNECT Smart Extension Cable, 5m/16.4ft AA580410055 TI.EC.1000000 TX CONNECT Smart Extension Cable, 10m/32.8ft A6342680055 TE.IC.0500000 TX CONNECT Smart Outdoor Interconnection Cable, 5m/16.4ft AA438920055 TE.IC.1500000 TX CONNECT Smart Outdoor Interconnection Cable, 15m/49.2ft AA438910055 TE.IC.3000000 TX CONNECT Smart Outdoor Interconnection Cable, 30m/98.4ft AA556320055 DI.IC.0300000 TX CONNECT Data Cable, 3m/9.8ft A63408C0055 DI.IC.0500000 TX CONNECT Data Cable, 5m/16.4ft AA556140055 DI.IC.1000000 TX CONNECT Data Cable, 10m/32.8ft A6341040055 DI.IC.2000000 TX CONNECT Data Cable, 20m/65.6ft AA556150055 DE.IC.0060000 TX CONNECT Data Outdoor Cable, 0.6m/1.97ft AA438800055 DE.IC.0300000 TX CONNECT Data Outdoor Cable, 3m/9.84ft AA438810055 DE.AC.0100000 RJ45 Male Connector Housing IP67 AA556100155 TX Power PS.IC.0010000 LED Engine Smart 150W Indoor 24V AA5571301HA PS.OA.0010000 LED Engine Smart 150W Outdoor 24V AA624100155 PS.AC.0000100 AC Power Cord (2m/6.6ft) - EU AA553860055 PS.AC.0000200 AC Power Cord (2m/6.6ft) - US AA556290055 PS.AC.0000300 AC Power Cord (2m/6.6ft) - UK AA556300155 PS.AC.0000400 AC Power Cord (2m/6.6ft) - AU AA556310055 Product Specification 05/16 V2.3 10 of 10