SECTION R Rectangular Indicator Lights Round Indicator Lights Large Format Indicator Lights Round DC LED Indicator Lights Round AC LED Indicator Lights Flashing Series LED Lights R3 R4 - R6 R7 R8 - R10 R11 - R12 R13
R2 SECTION T # E163296 - Vol:1 # E163296 - Vol:2 # 029592 Indicator Lights Type Page 31, 31ML-2 Rectangular Indicator Lights R3 32 Series Round Indicator Lights for 1/2 dia. Holes R4 39, 39U Round Indicator Lights for 5/16 dia. Holes R5 41, 65 Round Indicator Lights for 5/16 dia. Holes R6 L32 Large Format Indicator Lights for 1/2 dia. Hole R7 L39, L39U, L41 Round DC LED Indicator Lights for 5/16 dia. Hole R8 - R9 L58 Round DC LED Indicator Lights for 5/16 dia. Hole &.196 dia. Hole R9 L59U Round DC LED Indicator Lights for.250 dia. Hole &.1/4 dia. Hole R10 LA32 Round AC LED Indicator Lights for 1/2 dia. Hole R11 LA39, LA39U, LA41 Round AC LED Indicator Lights for 5/16 dia. Hole R11 - R12 32FL Flashing Series LED Lights for 1/2 dia. Hole R13 Electrical Devices Incorporated reserves the right to discontinue, modify designs and change specifications without incurring obligation. While every effort is made to ensure that descriptions, specifications and other information in this catalogue are correct, no warranty is given in respect thereof and the company shall not be liable for any error herein. Copyright 2011 Electrical Devices Inc
RECTANGULAR 1.281" X.395" MOUNTING HOLE R3 31 Series - Rectangular indicator light. Is perfect where a large light source is required. They are available in a wide variety of lens colours and voltages. Plated bezels are standard. They snap fit into a 1.281 X.395 (32.54 X10.03mm) mounting hole, up to.090 (2.28mm) thick panel, no other hardware is required. They are available with.250 x.032 (6.35mm x.81mm) or.187 x.020 (4.75mm x.51mm) brass male tabs. You can also get them with wire leads. AWM-1015/TEW-105ºC, 600V. Standard leads are 20AWG black, 6 long; stripped 1/2. 31 Series - Rectangular indicator light with message. Is perfect where a large light source is required to illuminate a message. They are available in a wide variety of lens colours and voltages. Plated bezels are standard. They snap fit into a 1.281 X.395 (32.54 X10.03mm) mounting hole, up to.090 (2.28mm) thick panel, no other hardware is required. They are available with.250 x.032 (6.35mm x.81mm) or.187 x.020 (4.75mm x.51mm) brass male tabs. You can also get them with wire leads. AWM-1015/TEW-105ºC, 600V. Standard leads are 20AWG black, 6 long; stripped 1/2. 31ML- 2 Series- Twin indicator. The 31ML-2 series incorporates two 31 series indicator lights in a common bezel. All 31 series variations are available. The mounting hole is 1.281 x.8125 (32.54 x 20.64mm) COMMON FEATURES: - Housing is ABS flame retardant, lenses are polycarbonate. - Terminals are brass.250 X.032 /.187 X.020 or lead wires. - To specify options, legends, etc, please specify in clearly worded text after the part number. - Standard legends are 10 point type. 31 31 G1-2111 - T3 VOLTAGE TERMINATION 31ML-2 SERVICE / VOLTAGE : SINGLE INDICATOR LAMP VOLTAGE CURRENT LIFE (HOURS) 31 NEON 125VAC 1/3W 25,000 31H NEON 250VAC 1/3W 25,000 31G1 INCANDESCENT 6.3V.20A 20,000 31G3 INCANDESCENT 14V.08A 15,000 31G18 INCANDESCENT 28V.04A 15,000 TERMINATION 6 WIRE LEADS 6.187 X.020 BRASS MALE TABS.250 X.032 BRASS MALE TABS T3 T4 COLOUR RED 2111 GREEN 2112 AMBER 2113 BLUE 2114 CLEAR 2117
R4 ROUND 1/2 MOUNTING HOLE 32 Series Snap in 6.3V - 575V 1/2 MOUNTING HOLE NEON INCANDESCENT - 32 Series are rugged and offer excellent long life. The lights usually outlasts the product that they are being used on. - They are compact and very economical. They take up little space on the panel or behind it and deliver good light at a modest cost. - They can be easily snap fit into a.500 to.505 (12.7 mm to 12.83 mm) Dia. hole in panels.030 to.093 (.76mm to 2.36mm) thick. For thicker panels spring steel mounting clips are available. 1 23/64 (34.53mm) 1/16 (1.57mm) 5/8 (15.88mm) - Available in different lens styles - Available in neon or incandescent versions - Available with or without plated steel bezel - Available with standard 6 black 20AWG AWM-1015/ TEW-105ºC, 600V lead wires, or.187 x.020, brass male tabs - Housing is made of nylon - Lenses are made of polycarbonate - UL listed / CSA certified 3/16 (4.76mm) 27/64 (10.72mm) STANDARD 1/32 (0.79mm) FLUSH 27/64 (10.72mm) 27/64 (10.72mm) 1/4 (6.35mm).495(12.57mm) 1 3/32 (27.79mm) LAMP CHART: LAMP VOLTAGE CURRENT RATED (HRS) (OMIT) 125VAC NEON 1/3 W 25,000 G1 6.3V INCANDESCENT.20A 20,000 G3 14.0V INCANDESCENT.08A 15,000 G18 28.0V INCANDESCENT.04A 15,000 G21 36.0V INCANDESCENT.02A 20,000 BEZEL (OPTIONAL) LAMP HOUSING COLOUR TERMINATION 32 R G1-2 11 2-6 BEZEL LAMP HOUSING LENS LENS COLOUR TERMINATION 32 R (Optional) See lamp code chart above 1 - Black 2 - White (Standard) 11 - Standard 31 - Flush 1 - Red 2 - Green 3 - Amber 4 - Blue 7 - Clear T3-187 X 0.20 Brass Male Tabs 6-20AWG Black Wire, 6 long stripped 1/2 X - Specify lead, length, type, colour, termination FOR HIGH VOLTAGE APPLICATIONS - CHANGE TO: VOLTAGE TERMINATIONS UL 35 250VAC TAB TERMINALS OR WIRE LEADS - 18 AWG RED 35XJ 347VAC WIRE LEADS ONLY - 18 AWG RED UR 35XL 440VAC WIRE LEADS ONLY - 18 AWG RED 35XK 575VAC WIRE LEADS ONLY - 18 AWG RED Different wire lead types, lengths,end strips and terminations are available. Please consult factory for details.
ROUND 39 Series Snap-mount Fresnel Lens, Wire Leads 5/16 DIAMETER HOLE R5 Mounting: Snap-in front panel mount into a 5/16 (7.9mm) hole. Integral locking ears holds the light securely in place. Panel range:.030 to.052 (.76mm to 1.32mm) Housing: One-piece construction with integral lens nylon. Lens: Standard lens is Flush style. AWG Wire Leads, Black.Type AWM-1015/TEW-105ºC, 600V. For 250V, wire leads are red in colour. VOLTAGE VOLTAGE : VOLTAGE CURRENT LIFE (HOURS) (OMIT) 125VAC 1/3W 25,000 H 250VAC 1/3W 25,000 G1 6.3V.20A 20,000 G3 14.0V.08A 15,000 G18 28.0V.04A 15,000 39 H - 0381-6 : LENS COLOURS 0381 RED 0382 GREEN 0383 AMBER 0384 BLUE 0387 CLEAR 39U Series Snap-mount, Wire Leads Mounting: Snap-in front panel mount into a 5/16 (7.9mm) hole. Integral locking ears holds the light securely in place. Panel range:.030 to.052 (.76mm to 1.32mm) Bezel: Chrome Plated Brass Bezel is standard. Lens: Cylindrical Standard or Flush with a Diffusing Fresnel Pattern. AWG Wire Leads, Black. Type AWM-1015/TEW-105ºC, 600V. For 250V, wire leads are red in colour. 39U H - 231 3-6 13/32 (10.32mm) 7/64 (2.77mm) VOLTAGE HOUSING COLOUR 9/32 (7.14mm) 3/32 (2.36mm) FLUSH LENS 21/64 13/32 1 39/64 (40.87mm) (8.33mm)(10.32mm) 3/32 (2.36mm) 9/32 (7.14mm) STANDARD LENS VOLTAGE : VOLTAGE CURRENT LIFE (HOURS) (OMIT) 125VAC 1/3W 25,000 H 250VAC 1/3W 25,000 G1 6.3V.20A 20,000 G3 14.0V.08A 15,000 G18 28.0V.04A 15,000 HOUSING : 211 - STANDARD 231 - FLUSH LENS COLOUR 1 - RED 2 - GREEN 3 - AMBER 4 - BLUE 7 - CLEAR Different wire lead types, lengths, end strips and terminations are available. Please consult factory for details.
R6 ROUND 41 Series Quick-mount Fresnel Lens, Wire Leads 5/16 MOUNTING HOLE Mounting: Friction fit in 5/16 (7.9mm) hole. Speed nut is supplied for maximum security. Panel range:.250 (6.35mm) max. Bezel: Chrome Plated Brass Bezel is standard. Lens: Flush or Standard with a Diffusing Fresnel Pattern AWG Wire Leads, Black. Type AWM-1015/TEW-105º C, 600V. For 250V, wire leads are red in colour. 13/32 (10.32mm) 7/64 (2.77mm) 1 11/64 (29.74mm) VOLTAGE 41 G1-211 1-6 9/32 (7.14mm) 3/32 (2.36mm) FLUSH LENS 13/32 (10.32mm) 3/32 (2.36mm) VOLTAGE : VOLTAGE CURRENT LIFE (HOURS) (OMIT) 125V AC 1/3W 25,000 HOUSING : LENS TYPE LENS COLOUR 1 - RED 9/32 (7.14mm) H 250V AC 1/3W 25,000 G1 6.3V.20A 20,000 G3 14.0V.08A 15,000 211 - STANDARD 231 - FLUSH 2 - GREEN 3 - AMBER 4 - BLUE 21/64 (8.33mm) G18 28.0V.04A 15,000 7 - CLEAR STANDARD LENS 65 Series Snap-mount, Fresnel Lens, Wire Leads Mounting: Snap-in front panel mount into a 5/16 (7.9mm) hole. Integral locking ears holds the light securely in place. Panel range:.032 to.047 (.81mm to 1.19mm). Housing: One-piece construction with integral lens. Lens: Standard lens is Hi-Hat style. AWG Wire Leads, Black. Type AWM-1015/TEW-105º C, 600V insulation. For 250V, wire leads are red in colour. 65 H - 0137-6 VOLTAGE VOLTAGE : : VOLTAGE CURRENT LIFE (HOURS) LENS COLOURS (OMIT) 125VAC 1/3W 25,000 H 250VAC 1/3W 25,000 G1 6.3V.20A 20,000 G3 14.0V.08A 15,000 G18 28.0V.04A 15,000 0131 RED 0132 GREEN 0133 AMBER 0134 BLUE 0137 CLEAR Different wire lead types, lengths, end strips and terminations are available. Please consult factory for details.
DC LED LARGE FORMAT L32 Series-DC LEDS Snap-in Front Panel Mount Mounting: Snap-in fit in 1/2 (12.7mm) hole. Optional speed nut can be supplied for greater security Panel range:.030 (.78mm) to.093 (2.38mm) max. Bezel: Bright Zinc Plated, Steel. (OPTIONAL) Lens: Cylindrical with a diffusing fresnel pattern, standard or flush. Current: 20 ma typical 1/2 MOUNTING HOLE The large format L32 indicator light is supplied with a super bright LED positioned in the assembly for full illumination of the lens. The viewing angle is over 180 degrees. Dropping resistors are built-in on source voltages other than 2V DC. Termination: Available with standard 6 length, stripped 1/2, 20AWG, type AWM-1015/TEW-105º C, 600V. Red for positive & Black for negative. Also available in brass male tabs..187 x.020 as T3 and are marked for polarity. R7 FLUSH LENS : STANDARD LENS L32 R R 6-2 11 1-6 A B G AMBER BLUE GREEN R RED BEZEL (OPTIONAL) DC-VOLTS HOUSING COLOUR TERMINATION Y FR BC STANDARD DC-VOLTS YELLOW FLASHING RED BI - COLOUR RED / GREEN, 28V, : R - RED G - GREEN A - AMBER B - BLUE For details on: Housing Colour, Lens Code, Lens Colour Code, Terminations & more see page R4
R8 DC LED L39 Series-DC LED Snap-mount, Fresnel Lens; Wire Leads 5/16 MOUNTING HOLE Mounting: Snap-in front panel mount into a 5/16 (7.9mm) hole. Integral locking ears hold the light securely in place. Panel range:.030 to.052 (.762 to 1.32mm) Housing: One piece construction with integral lens, nylon. Lens: Standard lens is Flush style. AWG Wire Leads. Type AWM-1015/TEW-105º C,.600V. Red for positive and Black for negative DC-VOLTS : A B AMBER BLUE L39 R 2-0381 - 6 : LENS COLOURS G GREEN 0381 RED R RED 0382 GREEN STANDARD DC-VOLTS Y FR BC YELLOW FLASHING RED BI - COLOUR RED / GREEN 0383 AMBER 0384 BLUE 0387 CLEAR L39U Series-DC LED Snap-mount, Wire Leads Mounting: Snap in front panel mount into a 5/16 (7.9mm) hole. Integral locking ears hold the light securely in place. Panel range:.030 to.052 (.762 to 1.32mm) Bezel: Chrome Plate Brass Bezel is standard. Lens: Standard or Flush with a Diffusing Fresnel Pattern. AWG Wire Leads. Type AWM-1015/TEW-105º C, 600V. Red for positive and Black for negative L39U G 6-211 3-6 13/32 (10.32mm) 7/64 (2.77mm) DC-VOLTS : HOUSING : A B AMBER BLUE LENS TYPE LENS COLOUR 9/32 (7.14mm) 3/32 (2.36mm) FLUSH LENS 1 39/64 (40.87mm) 21/64 (8.33mm) 13/32 (10.32mm) G R Y FR GREEN RED YELLOW FLASHING RED 211 - STANDARD 231 - FLUSH 1 - RED 2 - GREEN 3 - AMBER 4 - BLUE BC BI - COLOUR RED / GREEN 7 - CLEAR STANDARD LENS 3/32 (2.36mm) STANDARD DC-VOLTS Different wire lead types, lengths, end strips and terminations are available. Please consult factory for details.
DC LED INIDICATOR LIGHTS L41 Series-DC LEDS Quick-mount, Fresnel Lens; Wire Leads Mounting: Friction fit in 5/16 (7.9mm) hole. Speed nut is supplied for maximum security. Panel range:.250 (6.35mm) max. Bezel: Chrome Plated Brass Bezel is standard. Lens: Flush or Standard with a Diffusing Fresnel Pattern. 5/16 MOUNTING HOLE AWG Wire Leads. Type AWM-1015/TEW-105º C, 600V Red for Positive & Black for Negative. R9 3/32 (2.36mm) 13/32 (10.32mm) HOUSING : 13/32 (10.32mm) 7/64 (2.77mm) 1 11/64 (29.74mm) 9/32 (7.14mm) 21/64 (8.33mm) 211 - STANDARD 231 - FLUSH : 1 - RED 2 - GREEN 3 - AMBER 4 - BLUE 7 - CLEAR A AMBER 9/32 (7.14mm) 3/32 (2.36mm) L41 Y 2-231 4-6 B G R Y BLUE GREEN RED YELLOW FR FLASHING RED DC-VOLTS BC BI - COLOUR RED / GREEN STANDARD DC-VOLTS DC LED INIDICATOR LIGHTS.196 MOUNTING HOLE L58 Series-DC LEDS Mounting:.196 (4.98mm) hole Panel range: to.187 (4.76mm) max. Housing: Plated brass with integral bezel. Termination: W - Standard length is 6 (152mm), stripped 1/2 ; 24AWG wire leads. Type AWM-1007/TR64-90º C,.015 insulation. Red for Positive and Black for Negative. L58D - R 6 - W 0.350" (8.90mm) DC VOLTS TERMINATION S - DIFFUSED R - RED G - GREEN Y - YELLOW 0.264" (6.70mm) 0.193" (4.80mm) 0.275" (7.00mm) STANDARD DC-VOLTS. ( For units over 2V DC, external dropping resistor is used)
R10 DC LED / LED MOUNTING HARDWARE L59U Series-DC LED Snap-mount High Efficiency 1/4 MOUNTING HOLE Mounting:.250(6.35mm) Hole, Snap-Fit. Panel Range: to.030 -.130 (.76mm-3.30mm) thick. Housing: Black nylon. Termination: W - Standard length is 6 (152mm), stripped 1/2 ; 24AWG wire leads. Type AWM-1007/TR64-90º C,.015 insulation. Red for Positive and Black for Negative. L59U C - G 2 - W A (0.77mm) AMBER B BLUE LED TYPE DC VOLTS TERMINATION G R Y GREEN RED YELLOW FR FLASHING RED STANDARD DC-VOLTS BC BI - COLOUR RED / GREEN. ( For units over 2V DC, external dropping resistor is used) LED TYPE D - DIFFUSED C - CLEAR Different wire lead types, lengths, end strips and terminations are available. Please consult factory for details.
AC LED LA32 Series-AC LEDS Snap-in Front Panel Mount Mounting: Snap-in fit in 1/2 (12.7mm) hole. Optional speed nut can be supplied for greater security Panel range:.030 (.78mm) to.093 (2.38mm) max. Bezel: Bright Zinc Plated, Steel. (OPTIONAL) Lens: Cylindrical with a diffusing fresnel pattern, standard or flush. Current: 20 ma typical We have pioneered the development of AC LED indicator lights which function with full efficiency on AC supply voltages. For applications up to 28VAC, a built-in series resistor is used. Termination: Available with standard 6 length, stripped 1/2, 20AWG, type AWM-1015/TEW-105º C,.600V, Black and White. Also available in brass male tabs..187 x.020 as T3. 1/2 MOUNTING HOLE R11 BEZEL (OPTIONAL) AC-VOLTS HOUSING COLOUR TERMINATION LA32 R G 12-2 31 2 - T3 STANDARD DC-VOLTS Size for 2, 6,12, 24V models, 28V AC LED 5/16 MOUNTING HOLE LA39 Series-AC LED Snap-mount, Fresnel Lens; Wire Leads Mounting: Snap-in front panel mount into a 5/16 (7.9mm) hole. Integral locking ears hold the light securely in place. Panel range:.030 to.052 (.762 to 1.32mm) Housing: One piece construction with integral lens, nylon. Lens: Standard lens is Flush style. AWG Wire Leads. Type AWM-1015/TEW-105º C,.600V, Black and White : AC VOLTS LA39 R 2-0381 - 6 LENS COLOURS 0381 RED 0382 GREEN 0383 AMBER 0384 BLUE STANDARD AC-VOLTS R - RED G - GREEN Y - YELLOW A - AMBER B - BLUE
R12 AC LED LA39U Series-AC LEDS Snap-mount, Wire Leads Mounting: Snap in front panel mount into a 5/16 (7.9mm) hole. Integral locking ears hold the light securely in place. Panel range:.030 to.052 (.762 to 1.32mm) Bezel: Chrome Plate Brass Bezel is standard. Lens: Standard or Flush with a Diffusing Fresnel Pattern. 5/16 MOUNTING HOLE AWG Wire Leads. Type AWM-1015/TEW-105º C,.600V, black and white. 13/32 (10.32mm) 7/64 (2.77mm) FLUSH LENS AC-VOLTS L39U G 6-211 3-6 9/32 (7.14mm) 3/32 (2.36mm) 1 39/64 (40.87mm) 21/64 (8.33mm) 13/32 (10.32mm) 211 - STANDARD 231 - FLUSH 1 - RED 2 - GREEN 3 - AMBER 4 - BLUE R - RED G - GREEN Y - YELLOW A - AMBER B - BLUE STANDARD AC-VOLTS STANDARD LENS 3/32 (2.36mm) LA41 Series-AC LEDS Quick-mount, Fresnel Lens; Wire Leads Mounting: Friction fit in 5/16 (7.9mm) hole. Speed nut is supplied for maximum security. Panel Range:.250 (6.35mm) max. Bezel: Chrome Plated Brass Bezel is standard. Lens: Flush or Standard with a Diffusing Fresnel Pattern. AWG Wire Leads. Type AWM-1015/TEW-105º C, 600V, Black and White. Life Expectancy: 100, 000 Hrs. L41 Y 2-231 4-6 3/32 (2.36mm) 13/32 (10.32mm) AC-VOLTS 13/32 (10.32mm) 21/64 (8.33mm) 9/32 (7.14mm) 7/64 (2.77mm) 1 11/64 (29.74mm) 211 - STANDARD 231 - FLUSH 1 - RED 2 - GREEN 3 - AMBER 4 - BLUE R - RED G - GREEN Y - YELLOW A - AMBER B - BLUE STANDARD AC-VOLTS 9/32 (7.14mm) 3/32 (2.36mm) Different wire lead types, lengths, end strips and terminations are available. Please consult factory for details.
AC LED LA32 Series-AC LEDS Snap-in Front Panel Mount 1/2 MOUNTING HOLE R13 The 32 Series is available with outboard circuitry to provide a flashing action of approximately 100 times per minute. This is ideal for those applications where a warning indicator is desirable. Wire leads are standard. The circuitry will pass through the 1/2 (12.7mm) mounting hole of the standard 32 Series. BEZEL (OPTIONAL) HOUSING COLOUR 32FL R - 2 11 1-6 STANDARD AC-VOLTS 32FL = 125V AC 35FL = 250V AC : R - RED G - GREEN A - AMBER B - BLUE For details on: Housing Colour, Lens Code, Lens Colour Code, Terminations & more see page R4 Different wire lead types, lengths, end strips and terminations are available. Please consult factory for details.
FOR CUSTOM ORDERS CONSULT FACTORY