Device Management System [R 31] 1. What is InnovativeField Organizer? InnovativeField Organizer (hereinafter IFO) is a device management system for smart field devices that supports FOUNDATION fieldbus and HART Communication Protocol. 1.1. Features xcontributes to fast commissioning using improved methods of adjusting, checking, and testing field devices and control valves before startup/restart of plant. xonce plant operation has started, IFO monitors the status of field devices 24 hours a day, 365 days a year to detect any changes in the device at the earliest stage possible. xwith full-time connection HART communication, IFO monitors the status of operating devices with outstanding communication performance. xduring plant operation, control valves are continuously diagnosed online. xsupplies quantified indicators for control valves for conditionbased maintenance. xifo can be introduced without affecting DCS software simply. xthe status of devices is displayed in conformity with alarm standard 107 of the European user association NAMUR (hereinafter NAMUR NE107) and with Fieldbus Foundation FF912. 1.2. Advantages xsupports quick and accurate plant startup by providing strong support for device connection checks, configuration/calibration, inspections, and loop tests before the plant starts. xonce the plant has started operation, the operation status of field devices is monitored 24 hours a day, 365 days a year. By detecting field device abnormalities at an early stage, IFO brings the opportunities to prevent unscheduled plant shutdown. xifo assists plant managers to make the transition from timebased maintenance to condition-based maintenance, allowing them to create appropriate maintenance plans based on the actual degree of deterioration of control valves as indicated by CV diagnostic data. 2. Function Overview 2.1. Display of Device Status The operation status of field devices is displayed in a tree format that corresponds to the management hierarchy or system configuration of the plant equipment. This format provides operators and maintenance staff with a device management screen that can be viewed easily, offering excellent convenience and device visibility. Figure 1. Device Management Screen In the device tree, IFO displays device status with symbols that comply with NAMUR NE107 (NAMUR, 2006). When an alert status is detected for a device, a message is recorded with a time stamp of the occurrence time and is saved as alert history information Symbols compliant with NAMUR NE107 Symbol Maintenance Required Out of Specification Check Function Failure 1
2.2. Adjustment and Setting Field devices made by manufacturers other than Azbil Corporation can be adjusted and set using the device type manager (DTM) or Device (DD/EDD) provided by the field device manufacturer. 2.7. Diagnostics Application In addition to the internal self-diagnostics executed by field devices, sophisticated device-specific diagnostic mechanisms and management functions specially made for the devices, which cannot be realized by a DTM only, are provided as optional plugin applications for IFO. 2.7.1 PLUG-IN Valstaff (Control Valve Diagnostic Maintenance Support Package) PLUG-IN Valstaff makes the major valve management functions of Valstaff, Azbil Corporation's control valve maintenance support system, available on IFO. In combination with Azbil s AVP Smart Valve Positioner, PLUG-IN Valstaff provides online CV diagnostics, positioner auto-setup, automated step response test, and valve signature test *. * Valve signature test can be executed combining with Smart Valve Positioner 700 series. Figure 2. DTM for Azbil Corporation's AVP302 For field devices that support FOUNDATION fieldbus, the device description (DD) or electronic device description (EDD) provided by the manufacturer can also be used to adjust the device settings. 2.3. Tag Commissioning IFO user can be easily and quickly checked whether exact field devices are connected or not. Then the report can be created. 2.4. Support for Loop Tests Quick trial run preparations, pre-startup preparations, and loop tests are supported. Conventional, troublesome three or five point checks using simulated signal input from a handheld terminal can be automated and accompanied by operation testing and report creation. This function is available for HART devices that support HART command 40. 2.5. Support for Interlock Test and Sequence Tests IFO provides a batch handling tool for outputting simulated signals. When an IFO user executes the DCS Interlock Test or Sequence Test, this tool can be used to instruct simulated signal output to many field devices in one operation. With conventional methods, many people would be required in order to input simulated signals to multiple field devices. This function is available for HART devices that support HART command 40. 2.6. Automated report generation of device parameters With this function the IFO user can generate a report on the configured parameters of all field devices connected to IFO in a single operation. With conventional methods, the user would have to back up the parameters of each field device in the plant using a handheld terminal. Then, the user would have to return to his/her desk and manually create a report on the device parameters. The contents of the generated report depend on the information which has been defined through the Device DTM or DD provided by device vendors. Figure 3. Stick-Slip Diagnostics 3. System Configuration 3.1. For Advanced-PS (TDCS3000) Field devices and IFO are connected to each other using HART communication. The input/output subsystems of PM-EX, PM100 (R15 and R20), and A-MC process controllers are configured in a base unit type in order to mount base unit type input/output modules that comply with HART communication. Input/output modules are connected to digital field devices by an analog signal (DC 4 20 ma) and are connected to the device management system by the device communication network (Ethernet). LCN network Input/output modules that comply with HART communication base unit format 4 20 ma HG NIM A-MC PM100 PM-EX InnovativeField Organizer Figure 4. IFO Configuration for Advanced-PS/TDCS3000 EIM Device communication network 2
3.2. For Harmonas-DEO R410 Digital field devices can be connected to IFO using HART communication or FOUNDATION fieldbus. When HART communication is used, the input/output subsystems of DOPC IV, DOPC III, DOPC II, DOPC, and HC process controllers are configured in a base unit type in order to mount base unit type input/output modules that comply with HART communication. Input/output modules are connected to digital field devices by an analog signal (DC 4 20 ma) and are connected to the device management system by the device communication network (Ethernet). When FOUNDATION fieldbus is used, a FOUNDATION fieldbuscompatible process controller (DOFC) is used to realize high-speed communications with IFO. 3.4. IFO system configuration which is independent from DCS IFO can be configured independent from DCS by using HNU (HART Network Unit). In this case, IFO can be connected HART devices only. HNU is HART communication interface which can connect HART devices simultaneously full-time. For details on system configuration, refer to the spec sheet for HNU (HART Network Unit ). DCS operator station (DCS external type) InnovativeField Organizer DOSS DOSS DCS Controller Device communication network (Ethernet) HC DOPC DOPC II DOPC III DOPC IV X-BUS Figure 5. IFO Configuration for Harmonas-DEO R410 3.3. For Harmonas-DEO except for R410 Digital field devices and IFO can be connected to each other using HART communication. When HART communication is used, the input/output subsystems of the DOPC III, DOPC II, DOPC, and HC process controllers are configured in a base unit type in order to mount base unit type input/output modules that comply with HART communication. Input/output modules are connected to digital field devices by an analog signal (DC 4 20 ma), and are connected to IFO by the device communication network (Ethernet). InnovativeField Organizer Device communication network (Ethernet) Input/output modules complying with HART communication base unit format 4 20 ma DOSS HC DOPC DOPC II DOPC III X-BUS DEO control network DOSS Input/output modules complying with HART communication base unit format 4 20 ma DOFC FOUNDATION fieldbus DEO control network Figure 6. IFO Configuration for Harmonas-DEO except for R410 DCS AI/AO Terminal Figure 7. IFO system configuration which is independent from DCS 4. System Specifications Application specifications Maximum number of supported devices Client/server configuration Computer platform 3000 devices/system HNU (HART Network Unit) Client/server configuration not supported (to be supported in a future version) HD-P955FDSC4E Name Desktop CPU-z620 Windows 7 Pro (64bit) (English), Xeon 3.66 GHz, 4 GB memory, 500 GB HDD (RAID1), DVD-RAM drive, 4-ch. Specifications LAN, 1 COM ports, 9 USB ports, DC power panel, video output (2-ch. DVI; a different cable is needed for an analog connection) For details on HART communication-compatible X-bus/FX-bus input/output devices, refer to the spec sheet for HART communication-compatible X-bus/FX-bus input/output devices. For detail information about IFO system configuration which is independent from DCS using HNU, refer to the spec sheet for HNU. For details on FOUNDATION fieldbus communication devices, refer to the spec sheet for the FOUNDATION fieldbus-compatible DOFC controller. CAUTION Azbil Corporation has verified only the model listed above as a computing platform on which IFO software can be run normally. Azbil Corporation strongly recommends running IFO software on the computing platform with the model number above. If the user installs IFO software on a computing platform whose behavior has not been checked by Azbil Corporation, the software s operation cannot be guaranteed. If the lack of a guarantee is acceptable and IFO is run on a computing platform which Azbil has not checked, please use a computing platform that meets the following conditions at a minimum. OS: Windows 7 Professional SP1 RAM: at least 2 GB (32 bit), at least 4 GB (64 bit) Free space on C drive: at least 20 GB Wired LAN 3
5. License System 5.1. InnovativeField Organizer xinnovativefield Organizer base license License for number of device connection FNV-IFO3xE00 InnovativeField Organizer R3x base license 16 TAG entry edition FNV-IFO3xE01 InnovativeField Organizer R3x base license 100 TAG FNV-IFO3xE03 InnovativeField Organizer R3x base license 300 TAG FNV-IFO3xE05 InnovativeField Organizer R3x base license 500 TAG FNV-IFO3xE10 InnovativeField Organizer R3x base license 1000 TAG FNV-IFO3xE20 InnovativeField Organizer R3x base license 2000 TAG FNV-IFO3xE30 InnovativeField Organizer R3x base license 3000 TAG xinnovativefield Organizer AVP limited license for PLUG-IN InnovativeField Organizer R3x license for AVP only 16 TAG FNV-IFO3xEV1 entry edition License FNV-IFO3xEV2 InnovativeField Organizer R3x license for AVP only 25 TAG for number FNV-IFO3xEV3 InnovativeField Organizer R3x license for AVP only 50 TAG of AVP FNV-IFO3xEV4 InnovativeField Organizer R3x license for AVP only 100 TAG connection FNV-IFO3xEV5 InnovativeField Organizer R3x license for AVP only 200 TAG FNV-IFO3xEV6 InnovativeField Organizer R3x license for AVP only 300 TAG FNV-IFO3xEV7 InnovativeField Organizer R3x license for AVP only 500 TAG 6. External Storage Automatic backup and external storage is available for control valve diagnostic data collected by PLUG-IN Valstaff operating in IFO. For automatic back-up, after conferring with the client, we can use the external storage options listed below. Imation Corporation RDX Removable HDD Storage System USB3.0/RDX HDD Media Imation Corporation s web site: http://www.imation.com/en-us/ CAUTION When using external storage for automatic back-up, keeping your PC safe is a necessity. However, please do not install anti-virus software on the PC used for IFO. Instead, do virus-checking remotely from another PC. Also, if an external storage device whose operation we have not checked is used, Azbil Corporation cannot guarantee its operation or the integrity of the data. If the lack of a guarantee is acceptable and an external storage device which we have not checked is used, please use a device that meets the following conditions at a minimum. Device does not require special software (do not install software other than Azbil products on the PC used for IFO). Device does not incorporate a security function. IFO AVP limited licenses are limited license for PLUG-IN Valstaff use only. The user can connect only Azbil Corporation s smart valve positioner AVPx02 and AVPx03. To connect other devices, replace IFO license from AVP limited license to base license. xinnovativefield Organizer DCS connection license License for DCS connection FNV-IFO3xE-A FNV-IFO3xE-B FNV-IFO3xE-C FNV-IFO3xE-Y 5.2. PLUG-IN Valstaff xplug-in Valstaff base license InnovativeField Organizer R3x DCS connect license for APS/TDCS InnovativeField Organizer R3x DCS connect license for DEO R400 or earlier InnovativeField Organizer R3x DCS connect license for DEO R410 or later InnovativeField Organizer R3x DCS connect license for Other DCS License for number of device connection FNV-IFV3xE01 PLUG-IN Valstaff R3x license 16 TAG entry edition FNV-IFV3xE02 PLUG-IN Valstaff R3x license 25 TAG FNV-IFV3xE05 PLUG-IN Valstaff R3x license 50 TAG FNV-IFV3xE10 PLUG-IN Valstaff R3x license 100 TAG FNV-IFV3xE20 PLUG-IN Valstaff R3x license 200 TAG FNV-IFV3xE30 PLUG-IN Valstaff R3x license 300 TAG FNV-IFV3xE50 PLUG-IN Valstaff R3x license 500 TAG xplug-in Valstaff DMS connection license License for DMS connection FNV-IFV3xE-A PLUG-IN Valstaff R3x DMS connect license for IFO 4
About icons for safety precautions The safety precautions described in this document are indicated by the following icons. WARNING Warnings are indicated when mishandling this product might result in death or serious injury. CAUTION Cautions are indicated when mishandling this product might result in minor injury to the user, or only physical damage to the product. Example The indicated action is prohibited. Be sure to follow the indicated instructions. Safety precautions CAUTION Back up data and check for viruses regularly. Failure to do so may result in corrupted data or program malfunction. Do not install any anti-virus software into this PC. Check for viruses remotely from another PC. When using the loop check tool, exit these other tools first. Vendor DTM Device PLUG-IN Valstaff Device Watcher The loop check tool may operate in unexpected ways. Before executing an AI check, stop programs such as control programs and interlock programs. Failure to do so may change the input value for the DCS, resulting in an unexpected operation. Before executing an AO check, stop programs such as control programs and interlock programs. Also stop programs in the case of a DCS that is not made by Azbil Corporation. Otherwise, since an input value is written to the DCS, an unexpected operation may occur. 5
6
7
Valstaff is a trademark of the Azbil Corporation. FONDATION is a trademark of Fieldbus Foundation. HART is a trademark of HART Communication Foundation. Windows 7, Windows XP, Windows Vista, Windows Server 2003 and Windows Server 2008 are trademarks of Microsoft Corporation in the USA and other countries. Other product names, model nos., and company names may be trademarks of the respective company. Please read the "Terms and Conditions" from the following URL before ordering or use: http://www.azbil.com/products/bi/order.html Specifications are subject to change without notice. 1-12-2 Kawana, Fujisawa Kanagawa 251-8522 Japan URL: http://www.azbil.com/ (10) 8 1st Edition: Issued in Aug. 2014 No part of this publication may be reproduced or duplicated without the prior written permission of Azbil Corporation.