Ultra Fine Pitch (0.25mm), Ultra Low Profile (1.44mm) Connector for Micro Coaxial Cable (Stacking Type) XSLS SERIES KEL CORPORATION KEL CONNECTORS,INC KEL Taiwan Co., Ltd. KEL Shanghai Co.,Ltd. www.kel.jp 6-17-7 Nagayama, Tama-shi, Tokyo 206-0025, Japan Phone: +81-42-374-5802 Fax: +81-42-374-5888 E-mail: info@kel.jp 1250 Oakmead Parkway, Suite 105, Sunnyvale, CA 94085-4035, U.S.A. Phone: +1-408-720-9044 Fax: +1-408-720-1989 E-mail: info@kelusa.com 3F No.82-2 Dong-Shoenn st. Shu-Lin, Taipei Hsien, Taiwan R.O.C. 238 Phone: +886-2-8686-9200 FAX: +886-2-8686-6925 Flat 9, 6/F, Jing 'an China Tower, 1701 West Beijing Rd., Jing 'an Dist., Shanghai 200040, China Phone: +86-21-64400051 FAX: +86-21-64400053 9001, JIS Q 14001 CM001 CAT.No.XSLSe-1108-001-AY
XSLS SERIES 0.25mm PITCH CONNECTOR FOR MICRO COAXIAL CABLE (STACKING TYPE) XSLS 00 XSLS 20 Number of packaging A : 500pcs. per reel B : 3000pcs. per reel C : 5000pcs. per reel Number of contacts 30 : 30 pin Type 00 : Receptacle PCB side connector SMT Series name XSLS : 0.25mm pitch connector for micro coaxial cable (#42 AWG / #44 AWG / #46 AWG) Stacking type Number of contacts 30 : 30 pin Type 20 : Plug Cable side connector Series name XSLS : 0.25mm pitch connector for micro coaxial cable (#42 AWG / #44 AWG / #46 AWG) Stacking type Plug (cable side) connector is composed of a base and a shell. But the packaging quantity per reel differ. (Base : 5000pcs/reel Shell : 10000pcs/reel) Please order with a quantity multiples of 10,000pcs when ordering the plug (cable side) connector. Please consult with your local sales office for orders with a quantity less than 10,000pcs. Ultra fine pitch 0.25mm Ultra low profile1.44mm FEATURES For micro coaxial cable #42 AWG,#44 AWG,#46 AWG May be applied to some discrete cables, please consult with your local sales office. Highly reliable design with effective contact displacement of 0.31mm It can be put through narrow areas such as small hinge holes even after cable assembly. Due to that the bottom of the connector is covered with resin, circuit may be printed under the connector. Nickel barrier of the board side contact prevents solder rise. Ground terminals on both ends of the connector improve the transmission characteristic. Ground terminals of the board side connector are also utilized as retention clips. Mold ribs between the contacts of the cable side connector improve the accuracy of the alignment of the cables and prevent solder bridge. Signal terminals are soldered by Pulse Heat in one shot and keep a stable & highly reliable connection Having the width of the cable side connector longer than the board side connector makes it is easy to insert and withdraw without using a jig. Can be automatic or manually placed RoHS compliance Insulator material SPECIFICATIONS : Glass-filled LCP UL94V-0), Black (XSLS00) Inorganic Filler LCP (UL94V-0), Black (XSLS20) Contact material : Copper alloy Contact plating : Gold over Nickel Retention clip material : Copper alloy Retention clip plating : Gold over Nickel Shell material : Stainless Shell plating : Gold over Nickel Current rating : 0.3A per contact Contact resistance : 100mΩ max. Dielectric withstanding voltage : 100V AC for 1 minute Insulation resistance : 50MΩ min. at 100V DC Operating temperature : -40 to +85 Insertion and withdrawal durability : 30 times 2
XSLS SERIES 0.25mm PITCH CONNECTOR FOR MICRO COAXIAL CABLE (STACKING TYPE) XSLS00 Receptacle Receptacle A Unit:mm(inch) B 0.18 (0.007) No.2( ) C Ref.D No.1( ) X-X Cross Section 3.05(0.120) 2.85(0.112) 2.35(0.093) No.1( ) C 0.25(0.010)pitch No.2( ) 3.05(0.120) E ( )There is no specific direction for mounting or mating due to that the connector is in rotational symmetric shape. Please pay attention to pin assignment and mating direction of the plug connector. X 0.88(0.035) 3(0.118) 0.08 (0.003) X' 2 F 2.23±0.05 (0.088±0.002) 4-0.66±0.03 (0.026±0.001) 1.83±0.05 (0.072±0.002) 0.97 (0.038) 4-1±0.05(0.039±0.002) Printed Circuit Board Layout (Component Side View) G±0.1 G±0.004 C±0.05(C±0.002) H 0.5±0.03 (0.020±0.001) 0.3±0.03 (0.012±0.001) 0.25±0.03(0.010±0.001)pitch 0.5±0.03 0.020±0.001 0.3±0.03 J 0.012±0.001 K Hatching part is open area of SMT metal retention clip. Do not pattern in this area. Ground mounting is recommended. 0.7(0.028) 0.86±0.03 (0.034±0.001) 0.86±0.03 (0.034±0.001) 0.635 (0.025) Product Table / Dimensions No.of contacts Part Number A 30 XSLS00-30- 10.65 (0.419) No.of contacts Part Number 30 XSLS00-30- 8.35 (0.329) B C D E 8.95 (0.352) 9.15 (0.360) Product Table Part Number XSLS00-30-A XSLS00-30-B XSLS00-30-C 7 (0.276) 3.375 (0.133) 6 (0.236) 3.625 (0.143) Packaging style Embossed tape Number of packaging 500 3,000 5,000 7.25 (0.285) F G H J K 8.15 (0.321) 3
XSLS SERIES 0.25mm PITCH CONNECTOR FOR MICRO COAXIAL CABLE (STACKING TYPE) Plug XSLS20 Plug 11.15(0.439) Unit:mm(inch) 0.51(0.020) 7(0.276) 9.65(0.380) 0.5 (0.020) Mating Drawing 0.7 (0.028) XSLS20- (Cable side connector) No.3 No.1 8.09(0.319) 7.25(0.285) 0.25 0.010 pitch 1.17 (0.046) 0.88 (0.035) XSLS00- - (PCB side connector) 1.06 (0.042) 1.44 (0.057) No.2 A No.4 No.30 2 1.97 (0.078) 7(0.276) 0.25(0.010)pitch XSLS20 BASE XSLS20 SHELL 11.15(0.439) 1.12 (0.044) 10.85(0.427) 1.09 (0.043) 1.82 (0.072) 2.29 (0.090) Packaging style Other Product Table No.of Number of contacts packaging 30 5,000 No.of Number of contacts packaging 30 10,000 Part Number XSLS20-30 Number of packaging 10,000 *XSLS20-30BASE and XSLS20-30SHELL are component parts of XSLS20-30. 4 *Specifications and dimensions are subject to change without notice.