CA JCLCheck Workload Automation CA RS 1404 Service List

CA JCLCheck Workload Automation 12.0 1 CA RS 1404 Service List Description Hiper 12.0 RO62327 INVALID CAY6501 MESSAGE WITH MULTI-VOL DATASET AND NOSMS RO62328 INVALID CAY6501 MESSAGE WITH MULTI-VOL DATASET AND NOSMS RO64373 S0C4 IN JCLERR REXX TERMINATION PROCESSING RO64788 S0C4 ABEND IN JCLGETM RO64923 UNIX PATH SECURITY VALIDATION ERRORS RO65273 MISSING MESSAGE CAY6079 WITH IDCAMS ALTER RO65591 S0C4 ABEND PROCESSING IDCAMS DELETE RO65784 RESOLVE PANEL SYMLIB NOT CHECKED FOR MEM RO65935 BAD REPORT 8 IF STEPLIB IS TEMP RO65944 CTM OPTION NOT RETAINED IN OPTIONS RO65987 ABENDS0C1 WITH REMOTE VALIDATION RO66227 INCORRECT CAY6421E SCHENV MESSAGE RO66276 CAY6089E DATA SET IS NOT A PDS, AFTER CAY6081E RO66582 REFERBACK TO UNCATALOGED DATASET NOT REPORTED RO66666 JCLNEAT REMOVING () FROM GENERATION 0 RO66703 SOURCE RE-ASM FAILS IN JES3, MISSING $MODULE RO66754 BAD LINE NUMBERS DISPLAYED IN EDCHEK FOR ADRDSSU RO66757 INCORRECT MESSAGE CAY6309E RO66798 NO RELATIVE MESSAGE WHEN GDG NUMBER IS A ALPHA CHAR RO67360 INVALID CAY6072E MESSAGE IDCAMS DELETE RO67369 S0C4 IN CAZ2SYNM VALIDATING JCLCHECK STATEMENT RO67385 CAIRIM FOR SUBCHEK NOT ENABLE FIRST TIME IT RAN RO67584 IN-STREAM SYMBOL RESOLUTION ERROR Z/OS 2.1 RO67588 SET COMMANDS BEING PROCESSED AS PROC OVERRIDES RO67607 S0C4 ABEND APCDOC ONLY CAZ2JINT RO67652 JCLNEAT INCORRECT JCL FORMATTING RO67687 IDCAMS KEYWORD FRLOG NOT RECOGNIZED - CAY6037 RO67707 SYSTEM SYMBOLS INCORRECTLY RESOLVED RO67843 USER ADDED UTILITY USING $UPT VERB= FAILS RO67949 NO MESSAGE FOR INVALID IEBCOPY SELECT STATEMENT RO68026 UNIX PATH SECURITY VALIDATION RO68027 UNIX PATH SECURITY VALIDATION The CA RS 1404 service count for this release is 32

CA JCLCheck Workload Automation 11.0 2 CA RS 1404 Service List Description Hiper 11.0 RO67791 SOURCE RE-ASM FAILS IN JES3, MISSING $MODULE The CA RS 1404 service count for this release is 1

CA JCLCheck Workload Automation 3 CA RS 1404 Service List for CAZ1C00 FMID Service Description Hiper CAZ1C00 RO62327 INVALID CAY6501 MESSAGE WITH MULTI-VOL DATASET AND NOSMS RO64923 UNIX PATH SECURITY VALIDATION ERRORS RO65784 RESOLVE PANEL SYMLIB NOT CHECKED FOR MEM RO65944 CTM OPTION NOT RETAINED IN OPTIONS RO66666 JCLNEAT REMOVING () FROM GENERATION 0 RO67385 CAIRIM FOR SUBCHEK NOT ENABLE FIRST TIME IT RAN RO67652 JCLNEAT INCORRECT JCL FORMATTING RO68026 UNIX PATH SECURITY VALIDATION The CA RS 1404 service count for this FMID is 8

CA JCLCheck Workload Automation 4 CA RS 1404 Service List for CAZ2B00 FMID Service Description Hiper CAZ2B00 RO67791 SOURCE RE-ASM FAILS IN JES3, MISSING $MODULE The CA RS 1404 service count for this FMID is 1

CA JCLCheck Workload Automation 5 CA RS 1404 Service List for CAZ2C00 FMID Service Description Hiper CAZ2C00 RO62328 INVALID CAY6501 MESSAGE WITH MULTI-VOL DATASET AND NOSMS RO64373 S0C4 IN JCLERR REXX TERMINATION PROCESSING RO64788 S0C4 ABEND IN JCLGETM RO65273 MISSING MESSAGE CAY6079 WITH IDCAMS ALTER RO65591 S0C4 ABEND PROCESSING IDCAMS DELETE RO65935 BAD REPORT 8 IF STEPLIB IS TEMP RO65987 ABENDS0C1 WITH REMOTE VALIDATION RO66227 INCORRECT CAY6421E SCHENV MESSAGE RO66276 CAY6089E DATA SET IS NOT A PDS, AFTER CAY6081E RO66582 REFERBACK TO UNCATALOGED DATASET NOT REPORTED RO66703 SOURCE RE-ASM FAILS IN JES3, MISSING $MODULE RO66754 BAD LINE NUMBERS DISPLAYED IN EDCHEK FOR ADRDSSU RO66757 INCORRECT MESSAGE CAY6309E RO66798 NO RELATIVE MESSAGE WHEN GDG NUMBER IS A ALPHA CHAR RO67360 INVALID CAY6072E MESSAGE IDCAMS DELETE RO67369 S0C4 IN CAZ2SYNM VALIDATING JCLCHECK STATEMENT RO67584 IN-STREAM SYMBOL RESOLUTION ERROR Z/OS 2.1 RO67588 SET COMMANDS BEING PROCESSED AS PROC OVERRIDES RO67607 S0C4 ABEND APCDOC ONLY CAZ2JINT RO67687 IDCAMS KEYWORD FRLOG NOT RECOGNIZED - CAY6037 RO67707 SYSTEM SYMBOLS INCORRECTLY RESOLVED RO67843 USER ADDED UTILITY USING $UPT VERB= FAILS RO67949 NO MESSAGE FOR INVALID IEBCOPY SELECT STATEMENT RO68027 UNIX PATH SECURITY VALIDATION The CA RS 1404 service count for this FMID is 24

CA JCLCheck Workload Automation 12.0 6 CA RS 1404 - PTF RO62327 12.0 RO62327 RO62327 M.C.S. ENTRIES = ++PTF (RO62327) INVALID CAY6501 MESSAGE WITH MULTI-VOL DATASET AND NOSMS An invalid CAY6501 Message may be issued when NOSMS option is used with a multi-volume dataset. Invalid CAY6501 message JCL is not properly validated. None. PRODUCTS AFFECTED: CA JCLCheck R12.0 JCLCHK 928 OBTAIN MUST SPECIFY EADSCB=OK If the target of an OBTAIN macro may be an EAV (Extended Address Volume), the EADSCB=OK parameter must be specified on the OBTAIN macro. Otherwise, the OBTAIN macro may return with return code 24. Whenever the OBTAIN macro is used against an EAV, the macro may return with return code 24 and that particular function will abort. Whenever the OBTAIN macro is used against an EAV, the macro may return with return code 24 and that particular function will abort. When running JCLCheck against Extended Address Volumes, there is no circumvention. JCLCHK 933 Copyright (C) 2013 CA. All rights reserved. R00086-AJ6120-SP1 DESC(INVALID CAY6501 MESSAGE WITH MULTI-VOL DATASET AND NOSMS). FMID (CAZ1C00) PRE ( RO56302 ) SUP ( RO54357 RO54859 RO54941 TR54357 TR54859 TR54941 TR62327 ) ++IF FMID(CAZ2C00) REQ( RO62328).

CA JCLCheck Workload Automation 12.0 7 CA RS 1404 - PTF RO62328 12.0 RO62328 RO62328 M.C.S. ENTRIES = ++PTF (RO62328) INVALID CAY6501 MESSAGE WITH MULTI-VOL DATASET AND NOSMS An invalid CAY6501 Message may be issued when NOSMS option is used with a multi-volume dataset. Invalid CAY6501 message JCL is not properly validated. None. PRODUCTS AFFECTED: CA JCLCheck R12.0 JCLCHK 928 OBTAIN MUST SPECIFY EADSCB=OK If the target of an OBTAIN macro may be an EAV (Extended Address Volume), the EADSCB=OK parameter must be specified on the OBTAIN macro. Otherwise, the OBTAIN macro may return with return code 24. Whenever the OBTAIN macro is used against an EAV, the macro may return with return code 24 and that particular function will abort. Whenever the OBTAIN macro is used against an EAV, the macro may return with return code 24 and that particular function will abort. When running JCLCheck against Extended Address Volumes, there is no circumvention. JCLCHK 933 Copyright (C) 2013 CA. All rights reserved. R00086-AJ6120-SP1 DESC(INVALID CAY6501 MESSAGE WITH MULTI-VOL DATASET AND NOSMS). PRE ( RO53749 RO55504 RO55854 RO56298 RO56652 RO57344 ) SUP ( TR61296 TR62328 TR64800 ) ++IF FMID(CAZ1C00) REQ( RO62327).

CA JCLCheck Workload Automation 12.0 8 CA RS 1404 - PTF RO64373 12.0 RO64373 RO64373 M.C.S. ENTRIES = ++PTF (RO64373) S0C4 IN JCLERR REXX TERMINATION PROCESSING An s0c4 abend may occur during REXX termination processing. Control Blocks needed for message processing are not present. S0C4 ABEND in JCLERR JCLCheck terminates abnormally. None. JCLCHK 941 Copyright (C) 2014 CA. All rights reserved. R00095-AJ6120-SP1 DESC(S0C4 IN JCLERR REXX TERMINATION PROCESSING). PRE ( RO60863 RO63259 ) SUP ( TR64373 )

CA JCLCheck Workload Automation 12.0 9 CA RS 1404 - PTF RO64788 12.0 RO64788 RO64788 M.C.S. ENTRIES = ++PTF (RO64788) S0C4 ABEND IN JCLGETM An S0C4 abend may occur in JCLGETM in entry routine JCLPUTM attempting to free a specific storage area. S0C4 Abend in JCLCheck. JCLCheck terminates abnormally. None. JCLCHK 943 Copyright (C) 2013 CA. All rights reserved. R00100-AJ6120-SP1 DESC(S0C4 ABEND IN JCLGETM). SUP ( AC60361 RO60370 TR59762 TR60370 TR64788 )

CA JCLCheck Workload Automation 12.0 10 CA RS 1404 - PTF RO64923 12.0 RO64923 RO64923 M.C.S. ENTRIES = ++PTF (RO64923) UNIX PATH SECURITY VALIDATION ERRORS When JCLCheck security checking is active, if the JCL contains a UNIX PATH, JCLCheck displays security-related error (and warning) messages. The particular error (and warning) messages depends on the specific security product installed at the site. JCLCheck displays security-related error (and warning) messages. The particular error (and warning) messages depends on the specific security product installed at the site. JCLCheck displays security-related error (and warning) messages and continues to function. Omit (or comment-out) the UNIX PATH statements or do not activate JCLCheck security checking. JCLCHK 946 Copyright (C) 2013 CA. All rights reserved. R00102-AJ6120-SP1 DESC(UNIX PATH SECURITY VALIDATION ERRORS). FMID (CAZ1C00) PRE ( RO56649 RO56743 RO60862 ) SUP ( TR64923 )

CA JCLCheck Workload Automation 12.0 11 CA RS 1404 - PTF RO65273 12.0 RO65273 RO65273 M.C.S. ENTRIES = ++PTF (RO65273) MISSING MESSAGE CAY6079 WITH IDCAMS ALTER Missing CAY6079 message for a non-existent PDS when checking IDCAMS ALTER statements. Missing CAY6079 message. JCL error may not be detected. None. JCLCHK 945 Copyright (C) 2013 CA. All rights reserved. R00105-AJ6120-SP1 DESC(MISSING MESSAGE CAY6079 WITH IDCAMS ALTER). PRE ( RO53749 RO55854 RO56298 RO56652 RO56744 RO57344 RO60863 RO61320 RO61710 RO63084 RO64463 RO64948 ) SUP ( TR65273 )

CA JCLCheck Workload Automation 12.0 12 CA RS 1404 - PTF RO65591 12.0 RO65591 RO65591 M.C.S. ENTRIES = ++PTF (RO65591) S0C4 ABEND PROCESSING IDCAMS DELETE --------------------------------------------------- It is possible to abend with an S0C4-11 while processing an IDCAMS delete statement for a Generation Data Group base dataset. CA Jclcheck batch Jobs abend with S0C4. Termination of batch Jclcheck job. Reduce the number of Jcl members processed or run with Jclcheck option 'NOCSI'. JCLCHK 949 Copyright (C) 2014 CA. All rights reserved. R00106-AJ6120-SP1 DESC(S0C4 ABEND PROCESSING IDCAMS DELETE). PRE ( RO53749 RO55854 RO56298 RO56652 RO60863 RO61710 ) SUP ( TR65591 )

CA JCLCheck Workload Automation 12.0 13 CA RS 1404 - PTF RO65784 12.0 RO65784 RO65784 M.C.S. ENTRIES = ++PTF (RO65784) RESOLVE PANEL SYMLIB NOT CHECKED FOR MEM On the JCKSPF Resolve ISPF Panel for WA EE (ESP) the SYMLIB field requires a sequential file to be specified or a PDS with the member name included, ie. dsn(mem). This SYMLIB field is not checked for validity before passing to ESP for processing. ESP does issue message 'ESP390E DATASET IPSNESP.CNTL.SYMLIB PARTITIONED BUT NO MEMBER SPECIFIED' which is displayed by JCLCheck, but the field isn't validated before the JCLCheck job is run. 'ESP390E DATASET IPSNESP.CNTL.SYMLIB PARTITIONED BUT NO MEMBER SPECIFIED' message in REPORT 20 - RESOLUTION PRE-PROCESSOR report. A bad SYMLIB value is not detected until JCLCheck runs. Use the Report 20 to detect the problem with SYMLIB. JCLCHK 953 Copyright (C) 2014 CA. All rights reserved. R00108-AJ6120-SP1 DESC(RESOLVE PANEL SYMLIB NOT CHECKED FOR MEM). FMID (CAZ1C00) PRE ( RO54317 ) SUP ( TR65784 )

CA JCLCheck Workload Automation 12.0 14 CA RS 1404 - PTF RO65935 12.0 RO65935 RO65935 M.C.S. ENTRIES = ++PTF (RO65935) BAD REPORT 8 IF STEPLIB IS TEMP When a temporary dataset is used in a STEPLIB concatenation, the dataset name displayed on the PXREF report (Report 8) is invalid. REPORT 8 dataset name shows periods or other characters. Report 8 shows garbage in the dataset name, all other fields are correct. none. JCLCHK 954 Copyright (C) 2014 CA. All rights reserved. R00110-AJ6120-SP1 DESC(BAD REPORT 8 IF STEPLIB IS TEMP). PRE ( RO56298 RO56652 ) SUP ( TR65935 )

CA JCLCheck Workload Automation 12.0 15 CA RS 1404 - PTF RO65944 12.0 RO65944 RO65944 M.C.S. ENTRIES = ++PTF (RO65944) CTM OPTION NOT RETAINED IN OPTIONS In panel JCK0203 'CA JCLCheck ADDITIONAL PROCESSING OPTIONS' if CTM is specified for the RESOLVE option, it will not be retained and redisplayed the next time the panel is entered. This will prevent use of the Resolve Panel for Control-M. Resolve Panel (option 7) cannot be used by Control-M. CTM option is not redisplayed in the panel after exit and re-enter. Control-M resolve panel cannot be accessed from JCKSPF. Edit clist JCKMAIN and change 'CMT' to 'CTM' in the one line it occurs in near line 285. JCLCHK 955 Copyright (C) 2014 CA. All rights reserved. R00111-AJ6120-SP1 DESC(CTM OPTION NOT RETAINED IN OPTIONS). FMID (CAZ1C00) PRE ( RO56297 ) SUP ( TR65944 )

CA JCLCheck Workload Automation 12.0 16 CA RS 1404 - PTF RO65987 12.0 RO65987 RO65987 M.C.S. ENTRIES = ++PTF (RO65987) ABENDS0C1 WITH REMOTE VALIDATION Chekplex/GTS gets a S0C1 abend when requested from EDCHK (EJCK). This may also occur in foreground in the CA JCLCheck ISPF panels. Message 'LAST CC WAS 28' is displayed in the ISPF Editor. S0C1 abend occurs in the GTS task. ChekPlex remote validation can't be done from EDCHK. Run remote validation in batch. JCLCHK 956 Copyright (C) 2013 CA. All rights reserved. R00113-AJ6120-SP1 DESC(ABENDS0C1 WITH REMOTE VALIDATION). PRE ( RO63096 ) SUP ( TR60893 TR61808 TR65987 )

CA JCLCheck Workload Automation 12.0 17 CA RS 1404 - PTF RO66227 12.0 RO66227 RO66227 M.C.S. ENTRIES = ++PTF (RO66227) INCORRECT CAY6421E SCHENV MESSAGE When processing the DB2 RUN command, JCLCheck displays error message CAY6421E when encountering the PARM parameter. This message is being displayed incorrectly because it is related to the SCHENV JOB card parameter. The following message is displayed when processing the DB2 RUN command PARM parameter: CAY6421E SCHEDULING ENVIRONMENT 'parm data' DOES NOT EXIST - REASON CODE '0426' After issuing the aforementioned error message, JCLCheck continues to function normally. None. JCLCHK 960 Copyright (C) 2014 CA. All rights reserved. R00117-AJ6120-SP1 DESC(INCORRECT CAY6421E SCHENV MESSAGE). PRE ( RO55854 RO56298 RO60863 ) SUP ( TR66227 )

CA JCLCheck Workload Automation 12.0 18 CA RS 1404 - PTF RO66276 12.0 RO66276 RO66276 M.C.S. ENTRIES = ++PTF (RO66276) CAY6089E DATA SET IS NOT A PDS, AFTER CAY6081E Message CAY6089E may be displayed to incorrectly state that a dataset is not a PDS or PDSE if the dataset was allocated previously in the same job as DISP=NEW and the dataset already exists. CAY6081E DISP OF CATLG INVALID FOR 'dsn' - DATA SET ALREADY CATALOGED CAY6089E DATA SET 'dsn' IS NOT A PDS CAY6089E message in not correct, but correcting the cause of the CAY6081E message will prevent the CAY6089E messages. Correct the CAY6081E error and rerun. JCLCHK 961 Copyright (C) 2014 CA. All rights reserved. R00118-AJ6120-SP1 DESC(CAY6089E DATA SET IS NOT A PDS, AFTER CAY6081E). PRE ( RO56298 RO56652 ) SUP ( TR66276 )

CA JCLCheck Workload Automation 12.0 19 CA RS 1404 - PTF RO66582 12.0 RO66582 RO66582 M.C.S. ENTRIES = ++PTF (RO66582) REFERBACK TO UNCATALOGED DATASET NOT REPORTED If a DSN referback refers to a dataset that is uncataloged and is specified with a vol=ser=, then while the original dataset can be found, the referback to the uncataloged dataset cannot be found by the zos system and the job will fail with a JCL error - dataset not found. CA JCLCheck does not detect this condition as an error. CA JCLCheck does not detect the error. The JCL will fail when submitted. Job contains error that will cause the job not to run that is not detected. none. JCLCHK 963 Copyright (C) 2014 CA. All rights reserved. R00121-AJ6120-SP1 DESC(REFERBACK TO UNCATALOGED DATASET NOT REPORTED). PRE ( RO53749 RO55854 RO56298 RO56652 RO57344 RO60863 RO61320 RO62328 RO63084 RO64463 RO64948 RO65273 ) SUP ( TR66582 ) ++HOLD (RO66582) SYSTEM FMID(CAZ2C00) REASON (DOC ) DATE (14017) COMMENT ( +----------------------------------------------------------------------+ CA JCLCheck Common Component Release 12.0 +----------------------------------------------------------------------+ *************************** * PUBLICATION * *************************** This PTF adds a new message. CAY6439E REFERBACK TO UNCATLG DSN NEEDS VOL=REF=, DSN NOT FOUND Reason: DSN referback points to a dataset that is referenced by VOLSER and is not cataloged. The referback will not be able to find the file unless a VOL parameter is added to the referback statement. Action: Add a VOL=REF= parameter referring to the same statement as the DSN referback. ).

CA JCLCheck Workload Automation 12.0 20 CA RS 1404 - PTF RO66666 12.0 RO66666 RO66666 M.C.S. ENTRIES = ++PTF (RO66666) JCLNEAT REMOVING () FROM GENERATION 0 JCLNeat invoked with the REXXMEM option is incorrectly reformatting generation 0 dataset names without a plus (+) or minus (-) prefix character. JCLNeat invoked with the REXXMEM option is incorrectly reformatting generation 0 dataset names without a plus (+) or minus (-) prefix character. Dataset name 'SYSTEM.PLEX.OPERLOG.DAILY(0)' becomes 'SYSTEM.PLEX.OPERLOG.DAILY0'. Invalid JCL is produced. If REXX reformatting is not required, remove the REXXMEM option. PRODUCT(S) AFFECTED: JCLCHK Release 12.0 JCLCHK 965 Copyright (C) 2014 CA. All rights reserved. R00123-AJ6120-SP1 DESC(JCLNEAT REMOVING () FROM GENERATION 0). FMID (CAZ1C00) PRE ( RO53748 RO55852 RO55971 RO56649 RO60862 ) SUP ( TR66666 )

CA JCLCheck Workload Automation 12.0 21 CA RS 1404 - PTF RO66703 12.0 RO66703 RO66703 M.C.S. ENTRIES = ++PTF (RO66703) SOURCE RE-ASM FAILS IN JES3, MISSING $MODULE The SMPE reassembly of JCLSRBJ using macro JCLSRBJG requires the JES2 $MODULE macro that clients may not have if they are a JES3 only enviroment. Applying a PTF that updates either of these two elements can cause the apply to fail. Since release 11, the need to assemble these at the installation is not longer required, since the code was changed to dynamically determine the release info at runtime. This PTF removes these elements. PTF apply fails in a JES3 environment PTF cannot be applied The PTF can be edited to remove the ++MAC (JCLSRBJG) and ++SRC (JCLSRBJ) from the PTF. The PTF will then apply. Contact CA support for assistance. JCLCHK 967 Copyright (C) 2014 CA. All rights reserved. R00125-AJ6120-SP1 DESC(SOURCE RE-ASM FAILS IN JES3, MISSING $MODULE). PRE ( RO60863 RO63259 ) SUP ( TR66703 )

CA JCLCheck Workload Automation 12.0 22 CA RS 1404 - PTF RO66754 12.0 RO66754 RO66754 M.C.S. ENTRIES = ++PTF (RO66754) BAD LINE NUMBERS DISPLAYED IN EDCHEK FOR ADRDSSU In ISPF Edit when using the EJCK or!jck commands to check the JCL, if the job contains ADRDSSU control cards the addrdssu statements will appear at wrong place in the member proceeded by a string containing an L, ie. ' L ' and the messages will not appear by the original ADRDSSU statements in the member. ADRDSSU statements listed in ==MSG> lines with ' L ', or L with other characters, displayed before the statements. All errors are reported, but the display looks bad. None. JCLCHK 968 Copyright (C) 2014 CA. All rights reserved. R00127-AJ6120-SP1 DESC(BAD LINE NUMBERS DISPLAYED IN EDCHEK FOR ADRDSSU). PRE ( RO54309 RO63096 ) SUP ( AR63096 RO60676 RO64169 TR60676 TR63155 TR64169 TR66754 )

CA JCLCheck Workload Automation 12.0 23 CA RS 1404 - PTF RO66757 12.0 RO66757 RO66757 M.C.S. ENTRIES = ++PTF (RO66757) INCORRECT MESSAGE CAY6309E Periodically, when a UNIT=AFF parameter points to a DD which represents a pre-existing data set, error message CAY6309E is displayed. This is incorrect. When the problem occurs, error message CAY6309E is displayed and JCLCheck continues processing the JCL. When the problem occurs, error message CAY6309E is displayed and JCLCheck continues processing the JCL. None. JCLCHK 969 Copyright (C) 2014 CA. All rights reserved. R00128-AJ6120-SP1 DESC(INCORRECT MESSAGE CAY6309E). PRE ( RO56652 RO61320 ) SUP ( TR66757 )

CA JCLCheck Workload Automation 12.0 24 CA RS 1404 - PTF RO66798 12.0 RO66798 RO66798 M.C.S. ENTRIES = ++PTF (RO66798) NO RELATIVE MESSAGE WHEN GDG NUMBER IS A ALPHA CHAR When a JCL DD statement is coded for a gdg dataset and the generation data group number is not numeric, no relative error message is displayed from CA JCLCheck. CA Jclcheck batch Jobs terminate with a condition code 8, with messages : CAY6099W, CAY6089E The Jclcheck batch job terminates with condition code 8. NO relative error message for the alpha character GDG number. None JCLCHK 971 Copyright (C) 2014 CA. All rights reserved. R00129-AJ6120-SP1 DESC(NO RELATIVE MESSAGE WHEN GDG NUMBER IS A ALPHA CHAR). PRE ( RO53749 RO55982 RO56298 RO56652 RO57344 RO60863 RO61320 RO63084 RO64463 RO64948 RO65273 RO66582 ) SUP ( TR55123 TR66798 ) ++HOLD (RO66798) SYSTEM FMID(CAZ2C00) REASON (DOC ) DATE (14045) COMMENT ( +----------------------------------------------------------------------+ CA JCLCheck Common Component Release 12.0 +----------------------------------------------------------------------+ *************************** * PUBLICATION * *************************** THIS FIX ADD A NEW MESSAGE THAT IS ISSUED WHEN A GENERATION Data Group dataset GDG number is not numeric. After reviewing the new messages below, you may apply this fix by adding the BYPASS(HOLDSYS(DOC)) phrase to the APPLY command. CAY6671E DATA SET 'dsn name(#)' GDG NUMBER NOT NUMERIC Reason: CA JCLCheck detected that a generation data group dataset GDG number was not numeric. Action: Enter a valid generation data group number then rerun JCLCheck Batch job. ).

CA JCLCheck Workload Automation 12.0 25 CA RS 1404 - PTF RO67360 12.0 RO67360 RO67360 M.C.S. ENTRIES = ++PTF (RO67360) INVALID CAY6072E MESSAGE IDCAMS DELETE When processing an IDCAMS delete statement for a PDS dataset with a member name and FILE DD keyword, message CAY6072E displays incorrectly. CA Jclcheck batch Jobs terminate with a condition code 8, with messages : CAY6072E. The Jclcheck batch job terminates with condition code 8. None JCLCHK 980 Copyright (C) 2014 CA. All rights reserved. R00135-AJ6120-SP1 DESC(INVALID CAY6072E MESSAGE IDCAMS DELETE). PRE ( RO56298 RO56652 RO57344 RO62328 ) SUP ( TR67360 )

CA JCLCheck Workload Automation 12.0 26 CA RS 1404 - PTF RO67369 12.0 RO67369 RO67369 M.C.S. ENTRIES = ++PTF (RO67369) S0C4 IN CAZ2SYNM VALIDATING JCLCHECK STATEMENT An S0C4 abend may occur in JCLCheck when validating JCLCheck statements. S0C4 Abend in CAZ2SYNM. JCLCheck terminates abnormally, statements are not validated. None. JCLCHK 972 Copyright (C) 2014 CA. All rights reserved. R00136-AJ6120-SP1 DESC(S0C4 IN CAZ2SYNM VALIDATING JCLCHECK STATEMENT). PRE ( RO56298 RO60863 RO61710 RO64463 RO65273 RO67240 ) SUP ( TR66834 TR67369 )

CA JCLCheck Workload Automation 12.0 27 CA RS 1404 - PTF RO67385 12.0 RO67385 RO67385 M.C.S. ENTRIES = ++PTF (RO67385) CAIRIM FOR SUBCHEK NOT ENABLE FIRST TIME IT RAN --------------------------------------------------- CA JCLCheck option SUBCHEK is not enabled on the first execution of CAIRIM. Jobs submitted from a TSO edit session are not validated by CA JCLCheck. However if CAIRIM SUBCHEK option is done twice, the SUBCHEK option is enabled. CA JCLCheck does not validate JCL statements before the job is submitted. Jobs with JCL errors get submitted. Run CAIRIM for SUBCHEK option twice. JCLCHK 979 Copyright (C) 2014 CA. All rights reserved. R00137-AJ6120-SP1 DESC(CAIRIM FOR SUBCHEK NOT ENABLE FIRST TIME IT RAN). FMID (CAZ1C00) SUP ( TR67385 )

CA JCLCheck Workload Automation 12.0 28 CA RS 1404 - PTF RO67584 12.0 RO67584 RO67584 M.C.S. ENTRIES = ++PTF (RO67584) IN-STREAM SYMBOL RESOLUTION ERROR Z/OS 2.1 In-stream symbol resolution is being done incorrectly in some cases which causes utility control statements to be parsed improperly. Use of symbols in utility control statements may be parsed erroneously and reported incorrectly as errors. Valid utility control statements flagged incorrectly. None. PRODUCT(S) AFFECTED: CA JCLCheck WA Release 12.0 JCLCHK 983 Copyright (C) 2014 CA. All rights reserved. R00142-AJ6120-SP1 DESC(IN-STREAM SYMBOL RESOLUTION ERROR Z/OS 2.1). PRE ( RO56298 RO56652 RO64463 RO66503 RO67240 RO67580 ) SUP ( TR67555 TR67584 )

CA JCLCheck Workload Automation 12.0 29 CA RS 1404 - PTF RO67588 12.0 RO67588 RO67588 M.C.S. ENTRIES = ++PTF (RO67588) SET COMMANDS BEING PROCESSED AS PROC OVERRIDES When SET statements follow an EXEC for a procedure, the SET statements are processed with the overrides for the PROC. Depending on the usage of the set variables in the PROC and the number of steps in the PROC, JCLCheck could change the values of the variables used in the PROC resulting in incorrect values being substituted. Proceedure variables change in the middle of the PROC expansion. JCL is resolve incorrectly. Datasets that use the varibles may be referenced incorrectly. none. PRODUCT(S) AFFECTED: CA JCLCheck Release 12.0 JCLCHK 970 CAY6020E WITH PARM USING SYMBOLIC QUOTES When an EXEC parm uses symbolics to specify the quotes for the PARM, the ending symbolic may not resolve when the PARM exceeds one line. No 'SUBSTITUTION JCL -' appears for continuation line and message CAY6020E EXPECTED CONTINUATION NOT RECEIVED with a error severity of 8 is displayed for the EXEC statement. CAY6020E message is invalidly issued for a valid JCL statement. None. PRODUCT(S) AFFECTED: CA JCLCheck Release 12.0 JCLCHK 977 Copyright (C) 2014 CA. All rights reserved. R00143-AJ6120-SP1 DESC(SET COMMANDS BEING PROCESSED AS PROC OVERRIDES). PRE ( RO53749 RO55854 RO56298 RO56652 RO57344 RO60863 RO61320 RO61710 RO62328 RO64463 RO64948 RO65035 RO66503 RO67240 RO67369 RO67580 ) SUP ( RO66227 RO66757 RO67275 TR66227 TR66706 TR66757 TR67141 TR67275 TR67434 TR67588 )

CA JCLCheck Workload Automation 12.0 30 CA RS 1404 - PTF RO67607 12.0 RO67607 RO67607 M.C.S. ENTRIES = ++PTF (RO67607) S0C4 ABEND APCDOC ONLY CAZ2JINT An S0C4 Abend may occur in JCLCheck when called by APCDOC. S0C4 Abend in CAZ2JINT. Reports are not produced, job terminates abnormally. None. PRODUCT(S) AFFECTED: CA JCLCheck Release 12.0 JCLCHK 984 Copyright (C) 2014 CA. All rights reserved. R00144-AJ6120-SP1 DESC(S0C4 ABEND APCDOC ONLY CAZ2JINT). PRE ( RO56298 RO57344 ) SUP ( RO53758 RO54020 TR53010 TR53758 TR54020 TR67607 )

CA JCLCheck Workload Automation 12.0 31 CA RS 1404 - PTF RO67652 12.0 RO67652 RO67652 M.C.S. ENTRIES = ++PTF (RO67652) JCLNEAT INCORRECT JCL FORMATTING JCLNeat invoked with the REXXMEM option is truncating the data specified in the COND keyword on EXEC statements. JCLNeat invoked with the REXXMEM option is truncating the data specified in the COND keyword on EXEC statements. This statement: //JS0015 EXEC PGM=IDCAMS,COND=(0,EQ,JS0010) Is reformatted as: //JS0015 EXEC PGM=IDCAMS,COND=(0,EQ,JS0 Invalid JCL is produced. If REXX reformatting is not required, remove the REXXMEM option. PRODUCT(S) AFFECTED: CA JCLCheck WA Release 12.0 JCLCHK 985 Copyright (C) 2014 CA. All rights reserved. R00145-AJ6120-SP1 DESC(JCLNEAT INCORRECT JCL FORMATTING). FMID (CAZ1C00) PRE ( RO53748 RO55852 RO55971 RO56649 RO60862 ) SUP ( RO66666 TR66666 TR67652 )

CA JCLCheck Workload Automation 12.0 32 CA RS 1404 - PTF RO67687 12.0 RO67687 RO67687 M.C.S. ENTRIES = ++PTF (RO67687) IDCAMS KEYWORD FRLOG NOT RECOGNIZED - CAY6037 The IDCAMS keyword FRLOG is not recognized by CA JCLCheck and is flagged as an error. CAY6037E UNKNOWN KEYWORD "FRLOG" SPECIFIED IN OPERAND OF "CLUSTER" IDCAMS keywords do not pass verification. Run without CTLSCAN. Specify NOCTL option. PRODUCT(S) AFFECTED: CA JCLCheck Release 11.0 CA JCLCheck Release 12.0 JCLCHK 978 Copyright (C) 2014 CA. All rights reserved. R00146-AJ6120-SP1 DESC(IDCAMS KEYWORD FRLOG NOT RECOGNIZED - CAY6037). PRE ( RO55854 RO56298 RO60863 RO61320 RO61710 RO67240 ) SUP ( RO66178 RO66179 TR66178 TR66179 TR67687 )

CA JCLCheck Workload Automation 12.0 33 CA RS 1404 - PTF RO67707 12.0 RO67707 RO67707 M.C.S. ENTRIES = ++PTF (RO67707) SYSTEM SYMBOLS INCORRECTLY RESOLVED JCLCheck incorrectly resolving single character system symbols as null. JCLCheck incorrectly resolving single character system symbols as null. System symbol &SYSALVL. is set to '2' and resolved by JCLCheck as ''. Statements using the affected symbol(s) will be improperly processed and incorrectly flagged or passed. None. PRODUCT(S) AFFECTED: CA JCLCheck WA Release 12.0 JCLCHK 986 Copyright (C) 2014 CA. All rights reserved. R00148-AJ6120-SP1 DESC(SYSTEM SYMBOLS INCORRECTLY RESOLVED). PRE ( RO56298 ) SUP ( TR67707 )

CA JCLCheck Workload Automation 12.0 34 CA RS 1404 - PTF RO67843 12.0 RO67843 RO67843 M.C.S. ENTRIES = ++PTF (RO67843) USER ADDED UTILITY USING $UPT VERB= FAILS When customizing the JCLUPT table and using the $UPT VERB= option, the user provided utility checks may fail with a bad message such as CAY6006S VERB "M DV " IS UNKNOWN". CAY6006S VERB "M DV " IS UNKNOWN". Client provided utlity checks that use the VERB= option on the $UPT macro will not pass validation. Run checks without customized JCLUPT. Client utilites defined in customized table will not be checked. PRODUCT(S) AFFECTED: CA JCLCheck Release 12.0 JCLCHK 987 Copyright (C) 2014 CA. All rights reserved. R00149-AJ6120-SP1 DESC(USER ADDED UTILITY USING $UPT VERB= FAILS). PRE ( RO53749 RO54309 RO55504 RO55854 RO56298 RO56652 RO57344 RO60863 RO61710 RO62328 RO63096 RO63259 RO64463 RO64948 RO65273 RO66485 RO66503 RO67240 RO67369 RO67580 ) SUP ( AR63096 RO54516 RO60676 RO64169 RO64373 RO64519 RO65591 RO66754 RO67584 TR54516 TR60676 TR62458 TR63155 TR63919 TR64169 TR64373 TR64519 TR65591 TR66677 TR66754 TR67555 TR67584 TR67705 TR67843 )

CA JCLCheck Workload Automation 12.0 35 CA RS 1404 - PTF RO67949 12.0 RO67949 RO67949 M.C.S. ENTRIES = ++PTF (RO67949) NO MESSAGE FOR INVALID IEBCOPY SELECT STATEMENT When processing an IEBCOPY select statement for a single member name enclosed in multiple parentheses, no error message is displayed. CA Jclcheck batch Jobs terminate with a condition code 0 when job is submitted to the internal reader, the job ends with a CONTROL STATEMENT ERROR. None JCLCHK 988 Copyright (C) 2014 CA. All rights reserved. R00150-AJ6120-SP1 DESC(NO MESSAGE FOR INVALID IEBCOPY SELECT STATEMENT). PRE ( RO53749 RO55854 RO56298 RO56652 RO57344 RO60863 RO61320 RO61710 RO63084 RO64463 RO64948 RO65273 RO66582 RO66798 RO67843 ) SUP ( RO65591 TR65591 TR67705 TR67949 ) ++HOLD (RO67949) SYSTEM FMID(CAZ2C00) REASON (DOC ) DATE (14085) COMMENT ( +----------------------------------------------------------------------+ CA JCLCheck Common Component Release 12.0 +----------------------------------------------------------------------+ *************************** * PUBLICATION * ***************************. This fix add a new message that is issued when a invalid. IEBCOPY select statement is detected by CA JCLCheck.. After reviewing the new messages below, you may apply this. fix by adding the BYPASS(HOLDSYS(DOC)) phrase to the APPLY. command.. CAY6610 SELECT STATEMENT HAS INVALID FORMAT. Reason:. CA JCLCheck detected that a iebcopy select statement. with a single member name was enclosed in multiple. parentheses.. Action:. Correct select statement and rerun batch job. ).

CA JCLCheck Workload Automation 12.0 36 CA RS 1404 - PTF RO68026 12.0 RO68026 RO68026 M.C.S. ENTRIES = ++PTF (RO68026) UNIX PATH SECURITY VALIDATION This enhancement provides security validation for UNIX PATHs. It is based on the PATHMODE and PATHOPTS parameters and various callable services. This is not a problem. This is an enhancement. This is not a problem. This is an enhancement. Do not use the SECURITY(UNIXPATH) JCLCheck sub-option. JCLCHK 973 Copyright (C) 2014 CA. All rights reserved. R00152-AJ6120-SP1 DESC(UNIX PATH SECURITY VALIDATION). FMID (CAZ1C00) PRE ( RO56649 RO56743 RO60862 ) SUP ( RO64923 TR64923 TR68026 ) ++IF FMID(CAZ2C00) REQ( RO68027). ++HOLD (RO68026) SYSTEM FMID(CAZ1C00) REASON (DOC ) DATE (14085) COMMENT ( +----------------------------------------------------------------------+ CA JCLCheck Release 12.0 +----------------------------------------------------------------------+ *************************** * PUBLICATION * *************************** In order to activate this feature, you should specify SEC(PATH) as one of the JCLCheck options. ).

CA JCLCheck Workload Automation 12.0 37 CA RS 1404 - PTF RO68027 12.0 RO68027 RO68027 M.C.S. ENTRIES = ++PTF (RO68027) UNIX PATH SECURITY VALIDATION This enhancement provides security validation for UNIX PATHs. It is based on the PATHMODE and PATHOPTS parameters and various callable services. This is not a problem. This is an enhancement. This is not a problem. This is an enhancement. Do not use the SECURITY(UNIXPATH) JCLCheck sub-option. JCLCHK 973 Copyright (C) 2014 CA. All rights reserved. R00152-AJ6120-SP1 DESC(UNIX PATH SECURITY VALIDATION). PRE ( RO53749 RO55504 RO55854 RO56298 RO56652 RO57344 RO60863 RO61320 RO62328 RO63084 RO64463 RO64948 RO65273 RO66798 RO67843 RO67949 ) SUP ( RO66582 TR66582 TR68027 ) ++IF FMID(CAZ1C00) REQ( RO68026). ++HOLD (RO68027) SYSTEM FMID(CAZ2C00) REASON (DOC ) DATE (14085) COMMENT ( +----------------------------------------------------------------------+ CA JCLCheck Common Component Release 12.0 +----------------------------------------------------------------------+ *************************** * PUBLICATION * *************************** In order to activate this feature, you should specify SEC(PATH) as one of the JCLCheck options. ).

CA JCLCheck Workload Automation 11.0 38 CA RS 1404 - PTF RO67791 11.0 RO67791 RO67791 M.C.S. ENTRIES = ++PTF (RO67791) DESC (SOURCE RE-ASM FAILS IN JES3, MISSING $MODULE) /*------------------------------------------------------------------- PRODUCT: CA-JCLCHECK-MVS Common Component RELEASE: 11.0 DATE: 21 FEB 2014 HYPER: NO STARTRAK PROBLEM PRODUCT NAME: CM-Z2 PROBLEM NUMBER: 967 --------------------------------------------------------------------- SOURCE RE-ASM FAILS IN JES3, MISSING $MODULE --------------------------------------------------------------------- The SMPE reassembly of JCLSRBJ using macro JCLSRBJG requires the JES2 $MODULE macro that clients may not have if they are a JES3 only enviroment. Applying a PTF that updates either of these two elements can cause the apply to fail. Since release 11, the need to assemble these at the installation is not longer required, since the code was changed to dynamically determine the release info at runtime. This PTF removes these elements. PTF apply fails in a JES3 environment PTF cannot be applied The PTF can be edited to remove the ++MAC (JCLSRBJG) and ++SRC (JCLSR from the PTF. The PTF will then apply. Contact CA support for assistance. --------------------------------------------------------------------- PROBLEM RESOLUTION: Apply the following PTF to the system. Reload any resident modules, or re-ipl if necessary. ***NOTE*** Retain the printed output for reference. -------------------------------------------------------------------*/. FMID(CAZ2B00) PRE (RO64130) SUP (T4N1261).