MUN-AOC-SFP+-DDM-XXX Series Active Optical Cable (AOC) Multi-Mode 4Gbps to 10Gbps GBE /FC, RoHS6 Compliant Features Built-in digital diagnostic function Electrical interface compliant to SFF-8431 Fiber link up to 300m on OM3 MMF Variable fiber length per customer request 850nm VCSEL transmitter, PIN photo-detector receiver Hot Pluggable SFP+ form factor Good EMI performance +3.3V power supply RoHS 6 compliant Operating case temperature: 0~+70 CCompliant with Digital Diagnostic Monitor Applications 10 Gigabit Ethernet 1x InfiniBand QDR. DDR, SDR High-performance computing clusters 4G and 8G Fiber Channel Applications Servers, switches, storage,host card adapters and datacenter Interface SFF-8472 Ordering Information Part No. Length Wavelength Interface Temp. DDMI MUN-AOC-SFP+-DDM-001 1m 850nm AOC Standard Yes MUN-AOC-SFP+-DDM-002 2m 850nm AOC Standard Yes MUN-AOC-SFP+-DDM-003 3m 850nm AOC Standard Yes MUN-AOC-SFP+-DDM-004 4m 850nm AOC Standard Yes MUN-AOC-SFP+-DDM-005 5m 850nm AOC Standard Yes 1
MUN-AOC-SFP+-DDM-006 6m 850nm AOC Standard Yes MUN-AOC-SFP+-DDM-007 7m 850nm AOC Standard Yes MUN-AOC-SFP+-DDM-008 8m 850nm AOC Standard Yes MUN-AOC-SFP+-DDM-009 9m 850nm AOC Standard Yes MUN-AOC-SFP+-DDM-010 10m 850nm AOC Standard Yes Product Description The MUN-AOC-SFP+-DDM-XXX Active Optical Cables are direct-attach fiber assemblies with SFP+ connectors. They have very good performance and built-in five digital diagnostic fuction. They are suitable for very short distances and offer a cost-effective way to connect within racks and across adjacent racks. MUN-AOC-SFP+-DDM-XXX Active Optical Cables length is up to 300 meters on OM3 MMF. Specification Absolute Maximum Ratings Parameter Symbol Min Typical Max Unit Notes Storage Temperature TSTG -20 - +85 ºC Supply Voltage Vcc3-0.3 3.6 V Operating Relative Humidity RH 0 - +85 % Input Voltage Vin -0.3 - Vcc+0.3 V Recommended Operating Conditions Parameter Symbol Min Typical Max Unit Notes Operating Case temperature Ta 0 - +70 ºC Supply Voltage VCC3 3.13 3.3 3.47 V 2
Power Consumption(per end) - - 0.65 W Data Rate - 10.3 - Gbps Data Speed Tolerance DR -100 - +100 ppm Optical Characteristics All parameters are specified under the recommended operating conditions with PRBS31 data pattern unless otherwise specified Parameter Symbol Min Typical Max Units Notes Transmitter Centre Wavelength λc 840 850 860 nm Average Optical Power Pavg -6 - - dbm Extinction Ratio ER 3.5 - - db Rise/Fall time Tr/Tf - - 50 ps Relative Intensity Noise RIN - - -128 db/hz Optical Return Loss Tolerance TOL - - 12 db Transmitter Reflectance RT - - -12 db Receiver Centre Wavelength λc 840 850 860 nm Overload, each lane OVL -1 - - dbm Receiver Sensitivity in OMA, each Lane SEN - - -11 dbm 3
Electrical Specifications Parameter Symbol Min Typical Max Units Notes Differential input impedance Zin 90 100 110 ohm Differential Output impedance Zout 90 100 110 ohm Differential input voltage amplitude ΔVin 100-1800 mvp-p Differential output voltage amplitude ΔVout 400-800 mvp-p Bit Error Rate BR - - E-12 Input Logic Level High VIH 2.0 - VCC V Input Logic Level Low VIL 0-0.8 V Dimensions Figure1 4
ESD This transceiver is specified as ESD threshold 1KV for high speed data pins and 2KV for all others electrical input pins, tested per MIL-STD-883, Method 3015.4 /JESD22-A114-A (HBM). However, normal ESD precautions are still required during the handling of this module. This transceiver is shipped in ESD protective packaging. It should be removed from the packaging and handled only in an ESD protected environment. Warning Handling Precautions: This device is easy to be damaged as a result of ESD.A static free environment is highly recommended. Follow guidelines according to proper ESD procedures. 5
Revision History Revision Revision History Release Date V1.2 Released. 22.08.16 Obtaining Document You can visit our website: http://www.municom.de or contact Municom GmbH listed at the end of the documentation to get the latest document. Notice Municom reserves the right to make changes to or discontinue any optical link product or service identified in this publication, without notice, in order to improve design and/or performance. Applications that are described herein for any of the optical link products are for illustrative purposes only. Municom makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Contact: Add: Fuchsgrube 4 D-83278 Traunstein GERMANY Tel: +49-861-16677-0 Fax: +49-861-16677-88 E-mail: Web: info@municom.de http://www.municom.de 6