PRECISION FARMING TRADE UP PROGRAM Valid until 24 th June 2014 Trade now your old display for a new FM750 or FM1000 And get FREE unlock codes For more information Contact your Regional Precision Farming Specialist. *If traded solution value = 3 unlock codes 1/10
Guidelines The purpose of the Display Tradeup program is to assist you in upgrading your customers to the latest Precision Farming technology. This will enable you to provide your customers with faster service and quicker turnaround times. Please read the following information carefully as all the procedures have to be accurately followed for you to qualify for this program. Program Rules The program is valid until 24 th June 2014. To order your replacement display and unlocks, please do the following: 1. Verify that product to trade is on the Trade In Value Sheet (see pages 7 to 10) and verify the number of unlocks, if any, that are needed for given product. 2. Select and order the SP part number (see page 3) that includes the appropriate number of unlocks you found in the Trade In Value Sheet (pages 7 to 10). 3. Complete the FM1000 and FM750 Display TradeUp Form (see page 4). The completed form must include the following information: The sales order number or purchase order number and the part number for the replacement display & passcode bundle. The serial number of the existing equipment. The description of the existing equipment (display, GPS, and Guidance system). Note: Partially filled out forms will be rejected; you will be required to resubmit the forms. Please review your form to avoid unnecessary delays. 4. Email the completed form to: tradeupprograms@cnh.com. They have to be received and approved by CNH before replacement orders are released or shipped. 5. Destroy the trade product as explained in the Proof of Destruction sheet (see page 5) (holes drilled and connector ends ground down as shown). 6. Photograph the destroyed product showing adequate destruction and serial numbers (see page 6) and send it by email to tradeupprograms@cnh.com Note: Because this program highly depends on the clarity and authenticity of photos received to prove the destruction process, CNH may use photo verification technology to validate photos.!! ATTENTION the picture of the traded product showing its serial number and proof of destruction needs to be sent within 30 days after the order date. Please see page 4 & 5 to find out how to provide proof of destruction. CNH retain the right to invoice at a regular price the unlock received.!! For more Information Contact your Precision Farming Specialist. 2/10
Bundle Part Numbers Select and order your TradeUp program bundle that includes the appropriate number of unlocks below. Display Number of Unlock Codes Part number Description Price 1 ZTN9481567SP Display with Upgrade DGPS to OmniSTAR XP/HP, Trade Up Component P/N: ZTN9400060, ZTN81507 FM750 2 ZTN9481569SP Display with Upgrade OmniSTAR XP/HP and RTK, Trade Up Component P/N: ZTN9400060, ZTN81507, ZTN81509 1,822 3 ZTN9481560SP Display with OmniSTAR XP/HP, RTK, and GLONASS, Trade Up Component P/N: ZTN9400060, ZTN81507, ZTN81509, ZTN81510 1 ZTN9336010SP Display with Upgrade DGPS to OmniSTAR XP/HP, Trade Up Component P/N: ZTN933006000, ZTN69520 FM1000 2 ZTN9336011SP Display with Upgrade OmniSTAR XP/HP and RTK, Trade Up Component P/N: ZTN933006000, ZTN69521 3,155 3 ZTN9336012SP Display with OmniSTAR XP/HP, RTK, and GLONASS, Trade Up Component P/N: ZTN933006000, ZTN69522 1 ZTN9336310SP Display with Radio and Upgrade DGPS to OmniSTAR XP/HP, Trade Up Component P/N: ZTN933006003, ZTN69520 FM1000 Radio 2 ZTN9336311SP Display with Radio and Upgrade OmniSTAR XP/HP, and RTK, Trade Up Component P/N: ZTN933006003, ZTN69521 4,416 3 ZTN9336312SP Display with Radio and Upgrade OmniSTAR XP/HP, RTK, and GLONASS, Trade Up Component P/N: ZTN933006003, ZTN69522 Refer to the Trade In Value Sheet to know how many unlocks you qualify for. 3/10
FM1000 and FM750 Display TradeUp Return Form Please fill out this form carefully and email it with the photos proof of destruction to tradeupprograms@cnh.com to participate in the Display Tradeup program. Your details Dealer name Dealer contact Dealer phone number Email Sales order number for FM1000 /FM750 display Serial number of trade in equipment Description of trade in equipment (manufacturer name and model) For more information on how to fill out this form please contact your Precision Farming Specialist. 4/10
Proof of Destruction This bulletin describes how dealers can decommission CNH products in the field, and provide Proof of Destruction In Field (DIF), as an alternative to returning products. Process This process should only be used if authorized by CNH as part of the Trade In program. If products are destroyed without instruction or authorization from CNH, the dealer will be responsible for the cost or repair. Locate the serial number label of the product to be destroyed. Take care not to damage or deface in any way the serial number. A clear photograph of the number will be required at the end of the process. Use a hand grinder or drill to cut in to the sealed unit or connectors in such a way as to render the product unusable and beyond repair. The damage to the unit should be adjacent to the serial number label such that both can be seen in a single photograph. See examples on the following page. Take a photograph of the serial number and the damage. Make sure that the numbers are in focus and can be clearly read. Save the photograph to your computer and give them a name that describes the product and the serial number, such as <name>_<serial #>.* For example: Ag252_5432E12345 FM1000_4325E23451 FM750_3425E34512 Photographs can be sent as JPEG or as PDF format. The resolution of the photograph should be at least 1024x768 pixels, and the serial number must be legible. Send the photograph to the contact at CNH as instructed by the program documents. Dispose of the product using your local waste electronic equipment regulations. Audit provisions Destroyed products should be retained for 30 days after submitting the necessary photograph. CNH retains the right to audit any DIF claims within 30 days. After 30 days, you are permitted to dispose of the product in a safe and environmentally acceptable way, without any further approvals. 5/10
Display Receiver 6/10
Trade In Value Sheet Entry Level Tradein products Trade in value Photo Name FM750 or FM1000 Display EZGuide Plus With steering system TJet Centerline 220 With steering system Outback SLite With steering system Raven Cruizer and Cruizer II With steering system AgGPS 170 With nav. controller Trimble Nav. 1 controller EZGuide 500 DGPS EZGuide 500 XP/HP EZ Guide 500 RTK FMD AgGPS 252 DGPS AgGPS 252 XP/HP AgGPS 252 RTK (When traded with applicable display) 7/10
AgGPS 262 DGPS AgGPS 262 XP/HP AgGPS 262 RTK (When traded with applicable display) AgGPS 332 DGPS AgGPS 332 XP/HP AgGPS 332 RTK (When traded with applicable display) AgGPS 432 DGPS AgGPS 432 RTK AgGPS 442 GLONASS (When traded with applicable display) JD Display GS 1800 JD Display GS1+antenna JD Display GS 2600/2630 SF3000 receiver (any accuracy) Ag Leader Integra Ag Leader Versa Ag Leader EDGE Ag Leader Insight 8/10
Any Ag Leader/Auto Farm RTK antenna AutoFarm A5 display Outback Max Outback Max RTK With steering system 3 x GPS Upgrade Free Outback S3 Outback Sts Raven Envizio Pro and Pro II Raven Envizio Pro XL Raven Viper & Viper II Raven Viper Pro 3 x GPS Upgrade Free 9/10
Topcon X20 display Topcon X20 display Topcon X30 display for System 350 3 x GPS Upgrade Free Beeline Arro/TrueGuide with antenna and control box Leica Mojo with Antenna 10/10
DISPLAY TRADE UP PROGRAMME VALID UNTIL 24 JUNE 2014 Number of unlocks Old Net price Promo Net Price Discount % Discount Amount FM750 NH ZTN9481567SP FM750 NH with Upgrade DGPS to OmniSTAR XP/HP, Trade Up 1 3,424 1,892 45% 1,532 ZTN9400060 FM750 New Holland Egnos ready Europe 2,054 ZTN81507 FM750 Accuracy upgrade : Egnos to OmniSTAR XP/HP 1,370 ZTN9481569SP FM750 NH with Upgrade OmniSTAR XP/HP and RTK, Trade Up 2 4,794 1,892 61% 2,902 ZTN9400060 FM750 New Holland Egnos ready Europe 2,054 ZTN81507 FM750 Accuracy upgrade : Egnos to OmniSTAR XP/HP 1,370 ZTN81509 FM750 Accuracy upgrade : OmniSTAR XP/HP to RTK 1,370 ZTN9481560SP FM750 NH with OmniSTAR XP/HP, RTK, and GLONASS, Trade Up 3 5,141 1,892 63% 3,249 ZTN9400060 FM750 New Holland Egnos ready Europe 2,054 ZTN81507 FM750 Accuracy upgrade : Egnos to OmniSTAR XP/HP 1,370 ZTN81509 FM750 Accuracy upgrade : OmniSTAR XP/HP to RTK 1,370 ZTN81510 FM750 Accuracy upgrade : RTK to GLONASS 347 FM1000 NH ZTN9336010SP FM1000 NH with Upgrade DGPS to OmniSTAR XP/HP, Trade Up 1 4,655 3,155 32% 1,500 ZTN933006000 FM1000 New Holland Egnos ready Europe 3,250 ZTN69520 FM1000 GPS 1 Accuracy upgrade : Egnos to OmniSTAR HP/XP 1,405 ZTN9336011SP FM1000 NH with Upgrade OmniSTAR XP/HP and RTK, Trade Up 2 6,056 3,155 48% 2,901 ZTN933006000 FM1000 New Holland Egnos ready Europe 3,250 ZTN69521 FM1000 GPS 1 Accuracy upgrade : Egnos to to RTK 2,806 ZTN9336012SP FM1000 NH with OmniSTAR XP/HP, RTK, and GLONASS, Trade Up 3 6,210 3,155 49% 3,055 ZTN933006000 FM1000 New Holland Egnos ready Europe 3,250 ZTN69522 FM1000 GPS 1 Accuracy upgrade : Egnos to RTK Glonass 2,960 FM1000 w/ Radio NH ZTN9336310SP FM1000 NH with Radio and Upgrade DGPS to OmniSTAR XP/HP, Trade Up 1 5,953 4,416 26% 1,537 ZTN933006003 FM1000 New Holland Egnos ready + radio module 430470 MHz Europe 4,548 ZTN69520 FM1000 GPS 1 Accuracy upgrade : Egnos to OmniSTAR HP/XP 1,405 ZTN9336311SP FM1000 NH with Radio and Upgrade OmniSTAR XP/HP, and RTK, Trade Up 2 7,354 4,416 40% 2,938 ZTN933006003 FM1000 New Holland Egnos ready + radio module 430470 MHz Europe 4,548 ZTN69521 FM1000 GPS 1 Accuracy upgrade : Egnos to to RTK 2,806 FM1000 NH with Radio and Upgrade OmniSTAR XP/HP, RTK, and GLONASS, ZTN9336312SP Trade Up 3 7,508 4,416 41% 3,092 ZTN933006003 FM1000 New Holland Egnos ready + radio module 430470 MHz Europe 4,548 ZTN69522 FM1000 GPS 1 Accuracy upgrade : Egnos to RTK Glonass 2,960 PLM 372 ZTN57513363SP PLM 262 to PLM 372 GNSS Receiver, OmniSTAR, New Holland 1 3,860 2,208 43% 1,652 84588274 PLM 372 GPS Receiver Omnistar ready GNSS with mounting plate 3,860 ZTN57513367SP PLM 262 to PLM 372 GNSS Receiver, RTK, New Holland 2 4,558 2,524 45% 2,034 84588278 PLM 372 GPS Receiver RTK ready GNSS with mounting plate 4,558 ZTN57513366SP PLM 252 to PLM 372 GNSS Receiver, RTK, New Holland 2 4,558 3,155 31% 1,403 84588278 PLM 372 GPS Receiver RTK ready GNSS with mounting plate 4,558