FUSION SPLICING SYSTEMS. Fusion Splicers Cleavers Tools & Supplies Software

FUSION SPLICING SYSTEMS Fusion Splicers Cleavers Tools & Supplies Software

AFL is a value-added supplier. We strive to provide more than just a product and look far beyond the current sale in an effort to build a long term, business relationship with our customers. The Fusion Splicing team provides fast, dependable support after the sale centered on service, trust, and friendship in support of customer needs. Some of the positive, proactive things we do include: Free 24/7 technical support for all AFL customers - 800-866-3602 Free software upgrades that enhance equipment performance and customer satisfaction Free product demonstrations for guiding customers and understanding their needs Free training videos to enhance the customer learning experience Engineering support to assist with special splicing applications High quality repair service using only Fujikura approved parts and repair techniques Best in the industry repair turnaround time to minimize customer down time Optional expedited repair service for special time critical customer events Loaner equipment for special case circumstances, when available Large supply of inventory, enabling short lead-times for critical need products A staff dedicated to serving the customer s needs quickly and efficiently Thank you for choosing AFL and Fujikura fusion splicing products! Please visit us online at ww.aflglobal.com.

Table of Contents Field Fusion Splicing Equipment Splicers Single Fiber 70S... 2 62S... 4 22S... 6 19S... 8 12S... 10 Splicers Ribbon Fiber 70R.... 12 19R.... 14 12R.... 16 Cleavers CT-06 Cleaver.... 18 CT-30 Cleaver.... 19 CT-02 Pocket Cleaver.... 20 Strippers HJS-02 Hot Jacket Stripper.... 21 HJS-03 Hot Jacket Stripper.... 21 Splice Protection Splice Protection Sleeves.... 22 Ribbon Fiber Tools FST-12 Fiber Separation Tool.... 24 Fiber Arrangement Tools and Ribbon Forming Adhesive.... 25 Cleaning Splicer V-groove Cleaning Kit.... 26 CS-1 Cotton Swabs.... 26 Specialty Fusion Splicing Equipment Splicers LAZERMaster LZM-100 Laser Splicing System... 30 FSM-100M.... 32 FSM-100P... 32 FSM-100M+... 34 FSM-100P+... 34 Recoaters and Splice Protection FSR-05, FSR-06 and FSR-07 Fiber Recoaters... 37 Splice Protection Sleeves.... 39 Cleavers CT-32... 41 CT-38... 42 CT-100.... 43 CT-105 and CT-106... 44 PowerCleave... 46 Stripping, Cleaning & Fiber Prep Automation AFL PowerStrip... 47 HTS-12 High Tensile Stripper... 48 PCS-100 Stripper.... 49 APM-101 and APM-102 Automatic Preparation Machine.... 50 USC-03 Ultrasonic Cleaner... 51 Services Optimization Services... 52 Misc. Accessories Portable Tripod Workstation.... 27 ASW-02 Workstation.... 28 TJ-03 Temporary Joining Tool.... 29 1.12.2016 1

70S In case with lid detached Fujikura 70S Fusion Splicer The Fujikura 70S is the world s fastest and most robust core alignment fusion splicer. Incorporating the proven ruggedized features pioneered by Fujikura, the 70S has added automated and enhanced user control features to increase splicing efficiency. A user programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splice process, and opening upon splice completion. Fully programmable auto open sheath clamps open one or both sheath clamps, after the tensile test, to prepare the fiber for removal. A new automated clamshell design tube heater applies heat to both sides of the splice protection sleeve resulting in a 14-second shrink time. The result is a total splice process time of approximately 21 seconds! Ruggedness and durability are greatly enhanced by a mirror-less optical system and "severe-impact resistant" monitor. Battery capacity is now 200 splices/shrinks. An innovative transit case doubles as a built-in or mobile workstation and makes splicing easier than ever before. Features Automated and programmable wind protector 14-second automated tube heater Fully ruggedized for shock, dust and moisture Li-ion battery with 200 splices/shrinks per charge 5 mm cleave length for splice on connector or small package needs Sheath clamp or fiber holder operation On-board training and support videos Internet software upgrades Multi-function transit case with integrated workstation 70S Fusion Splicer (machine only) Includes: ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), S70C Sheath Clamp, USB Cable, Alcohol Pot, Screw Driver, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual and CC30 Transit Case with Carrying Strap 70S Fusion Splicer Kit (with cleaver) Includes: CT30A Cleaver, ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), S70C Sheath Clamp, USB Cable, Alcohol Dispenser, Screw Driver, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual, and CC30 Transit Case with Carrying Strap 70S Fusion Splicer Kit (with cleaver, battery and cord) Includes: BTR-09 Battery, DCC-18 Battery Charge Cord, CT30A Cleaver, ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), S70C Sheath Clamp, USB Cable, Alcohol Dispenser, Screw Driver, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual and CC30 Transit Case with Carrying Strap One Year Extended Warranty Two Year Extended Warranty S015580 S015590 S015591 S012996 S013000 2 2013, AFL, all rights reserved. PP-4-00059, Revision 3, 5.26.2015

Fujikura 70S Fusion Splicer Recommended Accessories for the 70S Cleavers CT-06A Cleaver CT-30A Cleaver Fiber Holders FH-60-250 Fiber Holder (pair) FH-60-900 Fiber Holder (pair) FH-60-160 Fiber Holder (pair) FH-60-LT900 Fiber Holder (pair) FH-60-LT900 Single Side Fiber Holder FUSEConnect Accessories FH-FC-20 (900 µm within 2.0 mm sheathing) (each) FH-FC-30 (900 µm within 3.0 mm sheathing) (pair) FH-FC-900 (900 µm cable) (each) CLAMP-FC-2000 (pair) CLAMP-FC-3000 (pair) Sheath Clamps CLAMP-S70C Sheath Clamp (Coating diameter from 100 µm - 1000 µm (5-16 mm cleave)) CLAMP-S70D Sheath Clamp (900 µm diameter loose tube fiber (5-16 mm cleave)) S015276 S014080 S014548 S014549 S014690 S015181 S015275 S014696 S014695 S014697 S014705 S014704 S015586 S015862 Batteries and Power Cords ADC-18 AC Adapter ACC-14 AC Power Cord BTR-09 Battery DCC-18 Battery Charge Cord DCC-12 Power Cord (connects AC Adapter to cigarette lighter socket) DCC-13 Power Cord (connects AC Adapter to power source via alligator clips) Miscellaneous ELCT2-20A Electrodes Portable Tripod Workstation (see product profile for more detail) ASW-02 Splicing Workstation (see product profile for more detail) JP-06 J-PLATE (70/19 Series) SL-01 Sleeve Loader Worktable Upper Worktable Lower Inner Box Set USB Cable CC-30 Transit Case S015585 S014536 S015581 S015582 S013552 S013556 S013532 S014773 S010532 S016100 S015674 S015779 S015780 S015979 S014777 S015587 PARAMETER VALUE Model 70S Fusion Splicer Applicable Fibers Single-mode (G.652 & G.657), Multimode (G.651), DS (G.653), NZDS (G.655) Cladding Diameter 80-150 μm Coating Diameter 100 μm to 1,000 μm Fiber Cleave Length 5 to 16 mm Typical Average Splice Loss 0.02 db with SM, 0.01 db with MM, 0.04 db with DS, 0.04 db with NZDS, measured by cut-back method relevant to ITU-T standards Splicing Time SM FAST mode 7 seconds; SM AUTO mode 10 seconds; AUTO mode 15 seconds with SM fiber Arc Calibration Method Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available Splicing Modes 100 preset and user programmable modes Splice Loss Estimate Based upon dual camera core axis alignment data Storage of Splice Result Last 2,000 results stored in the internal memory Fiber Display X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation Magnification 320X for single X or Y view, or 200X for X and Y view Viewing Method Dual cameras with 4.7 inch TFT color LCD monitor Operating Condition 0 to 5,000 m above sea level, 0 to 95%RH and -10 to 50 C respectively Mechanical Proof Test 1.96 to 2.25N Tube Heater Built-in tube heater with 30 heating modes; auto-start function Tube Heating Time Typical 14 seconds with FP-03 sleeve, 17 seconds with FP3 (40), 5-16 seconds with Fujikura micro sleeves Protection Sleeve Length 60 mm, 40 mm, micro Splice/Heat Cycles with Battery Typical 200 cycles with power save functions activated Electrode Life 3,000 Arc Discharges Power Supply Auto voltage selection from 100 to 240 V AC or 10 to 15 V DC with ADC-18, 14.8 V DC with BTR-09 battery Terminals USB 1.1 (USB-B type) for PC communication. Mini-DIN (6-pin) for HJS-02/03 Wind Protection Maximum wind velocity of 15 m/s. (34 mph) Dimensions 146 W x 159 D x 150 H (mm) / 5.75 W x 6.25 D x 5.9 H (inches) Weight 2.5 kg (5.5 lbs) with AC adapter ADC-18; 2.7 kg (5.95 lbs) with BTR-09 battery 3 2013, AFL, all rights reserved. PP-4-00059, Revision 3, 5.26.2015

Fujikura 62S Fusion Splicer The Fujikura 62S provides active core alignment splice loss performance while utilizing a conventional wind protector and tube heater design. An alternative to the fully automated core-alignment model 70S, the 62S includes an auto-start feature for both the splicing and tube heating process that minimizes the steps necessary to process splices. With a shrink time of 23 seconds with standard splice sleeves, the 62S ensures a high level of productivity. Incorporating the proven ruggedized features pioneered by Fujikura, durability is greatly enhanced by a mirrorless optical system and "severeimpact resistant" monitor. Battery capacity is 200 splices/shrinks. The transit case doubles as a built-in or mobile workstation and makes splicing easier than ever. Features 5,000 splices electrode life 23 second tube heating time with standard sleeves Fully ruggedized for shock, dust and moisture Li-ion battery with 200 splices/shrinks per charge 5 mm cleave length for splice on connector or small package needs Sheath clamp or fiber holder operation Internet software upgrades Multi-function transit case with integrated workstation 62S Fusion Splicer (machine only) Includes: ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), S21A Sheath Clamp, Sleeve Loader, USB Cable, Alcohol Pot, Screwdriver, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual and CC-24 Transit Case with Carrying Strap 62S Fusion Splicer Kit (with CT-06A cleaver) Includes: CT-06A Cleaver, ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), S21A Sheath Clamp, Sleeve Loader, USB Cable, Alcohol Pot, Screwdriver, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual and CC-24 Transit Case with Carrying Strap 62S Fusion Splicer Kit (with CT-06A cleaver, battery and cord) Includes: BTR-09 Battery, DCC-18 Battery Charge Cord, CT-06A Cleaver, ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), S21A Sheath Clamp, Sleeve Loader, USB Cable, Alcohol Pot, Screwdriver, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual and CC-24 Transit Case with Carrying Strap 62S Fusion Splicer Kit (with CT-30A cleaver) Includes: CT-30A Cleaver, ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), S21A Sheath Clamp, Sleeve Loader, USB Cable, Alcohol Dispenser, Screwdriver, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual and CC-24 Transit Case with Carrying Strap 62S Fusion Splicer Kit (with CT-30A cleaver, battery and cord) Includes: BTR-09 Battery, DCC-18 Battery Charge Cord, CT-30A Cleaver, ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), S21A Sheath Clamp, Sleeve Loader, USB Cable, Alcohol Dispenser, Screwdriver, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual and CC-24 Transit Case with Carrying Strap One Year Extended Warranty Two Year Extended Warranty S016279 S016282 S016283 S016280 S016281 S012996 S013000 4 2015, AFL, all rights reserved. PP-4-00097, Revision 0, 12.16.2015

Fujikura 62S Fusion Splicer Recommended Accessories for the 62S Cleavers CT-06A Cleaver CT-30A Cleaver Fiber Holders FH-60-250 Fiber Holder (pair) FH-60-900 Fiber Holder (pair) FH-60-160 Fiber Holder (pair) FH-60-LT900 Fiber Holder (pair) FH-60-LT900 Single Side Fiber Holder FUSEConnect Accessories FH-FC-20 (900 µm within 2.0 mm sheathing) (each) FH-FC-30 (900 µm within 3.0 mm sheathing) (pair) FH-FC-900 (900 µm cable) (each) CLAMP-FC-2000 (pair) CLAMP-FC-3000 (pair) Sheath Clamps CLAMP-S21A Sheath Clamp (Coating diameter from 100 µm - 1000 µm (5-16 mm cleave)) CLAMP-S21B Sheath Clamp (900 µm diameter loose tube fiber (5-16 mm cleave)) S015276 S014080 S014548 S014549 S014690 S015181 S015275 S014696 S014695 S014697 S014705 S014704 S016160 S016161 Batteries and Power Cords ADC-18 AC Adapter ACC-14 AC Power Cord BTR-09 Battery DCC-18 Battery Charge Cord DCC-12 Power Cord (connects AC Adapter to cigarette lighter socket) DCC-13 Power Cord (connects AC Adapter to power source via alligator clips) Miscellaneous ELCT2-20A Electrodes Portable Tripod Workstation (see product profile for more detail) ASW-02 Splicing Workstation (see product profile for more detail) JP-08 J-PLATE SL-01 Sleeve Loader USB Cable CC-24 Transit Case S015585 S014536 S015581 S015582 S013552 S013556 S013532 S014773 S010532 S016284 S015674 S014777 S016285 PARAMETER VALUE Model 62S Fusion Splicer Applicable Fibers Single-mode (G.652 and G.657), Multimode (G.651), DS (G.653), NZDS (G.655) Cladding Diameter 80 μm to 150 μm Coating Diameter 100 μm to 1,000 μm Fiber Cleave Length 5 to 16 mm Typical Average Splice Loss 0.02 db with SM, 0.01 db with MM, 0.04 db with DS, 0.04 db with NZDS, measured by cut-back method relevant to ITU-T standards Splicing Time ULTRA FAST mode 6 seconds; SM FAST mode 7 seconds; SM AUTO mode 10 seconds with SM fiber Arc Calibration Method Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available Splicing Modes 100 preset and user programmable modes Splice Loss Estimate Based upon dual camera core axis alignment data Storage of Splice Result Last 10,000 results stored in the internal memory Fiber Display X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation Magnification 320X for single X or Y view, or 200X for X and Y view Viewing Method Dual cameras with 4.7 inch TFT color LCD monitor Operating Condition 0 to 5,000 m above sea level, 0 to 95%RH and -10 to 50 C respectively Mechanical Proof Test 1.96 to 2.25N Tube Heater Built-in tube heater with 30 heating modes; auto-start function Tube Heating Time Typical 23 seconds with FP-03 sleeve, 17 seconds with FP3 (40), 5-16 seconds with Fujikura micro sleeves, 15 seconds with slim 60 mm and 40 mm sleeves Protection Sleeve Length 60 mm, 40 mm, micro Splice/Heat Cycles with Battery Typical 200 cycles with power save functions activated Electrode Life 5,000 Arc Discharges Power Supply Auto voltage selection from 100 to 240 V AC or 10 to 15 V DC with ADC-18, 14.8 V DC with BTR-09 battery Terminals USB 1.1 (USB-B type) for PC communication. Mini-DIN (6-pin) for HJS-02/03 Wind Protection Maximum wind velocity of 15 m/s (34 mph) Dimensions 146 W x 159 D x 150 H (mm) / 5.75 W x 6.25 D x 5.9 H (inches) Weight 2.5 kg (5.5 lbs) with AC adapter ADC-18; 2.7 kg (5.95 lbs) with BTR-09 battery 5 2015, AFL, all rights reserved. PP-4-00097, Revision 0, 12.16.2015

22S (with Cleaver for scale) Workstation in Transit Case Fujikura 22S Fusion Splicer The Fujikura 22S active cladding alignment fusion splicer bridges the long standing gap between core alignment and fixed v-groove fusion splicer technology. Moveable v-grooves eliminate splicer errors due to dust and other contaminants. Despite its incredibly small size, this ruggedized, full-featured unit offers unmatched versatility for splicing in the most challenging environments. The innovative transit case and work tray provide multiple options for the best utilization of available work space while the long life battery provides power for up to 200 splice cycles which include application of the splice protection sleeve. The Fujikura 22S incorporates features typically found only in more expensive models. Removable sheath clamps allow the use of fiber holders if desired. The large 4.7" monitor provides a crystal clear image, even in the brightest sunlight, for evaluating splice quality. The electrode life has been extended to 3,000 splices, minimizing downtime for replacement and stabilization. Software updates are accomplished via the internet allowing users to quickly update their software as new splice programs become available. The fully ruggedized chassis provides for shock, dust and moisture protection while the two camera observation system provides for accurate fiber alignment and loss estimation calculations. The Fujikura 22S is also fully compatible with the FUSEConnect line of fusion installable connectors. Backed by the best service team in the industry, the Fujikura 22S is the ideal splicer to use when portability, ruggedness, versatility and reliability are needed for your splicing application. Features Dual camera, active cladding alignment technology World s smallest active clad alignment splicer at 4.72"W x 7.44"D x 2.8"H Fully ruggedized for shock, moisture and dust resistance Transit case converts to easy to use workstation Extended life electrodes Long life battery (200 splices/shrinks per charge) Auto start tube heater Workstation on Transit Case Fujikura 22S Kit 1 Fujikura 22S Fusion Splicer Includes: Fujikura 22S Fusion Splicer, S21A Sheath Clamp, ADC-19 AC Adapter, BTR-11 Battery Pack (installed), ACC-09 Power Cord, ELCT2-12 Spare Electrodes (pair), Operation Manual on CD, Quick Reference Guide, AP-01 Alcohol Container,SD01 Screwdriver and CC-32 Transit Case Fujikura 22S Fusion Splicer Kit 1 Includes: Fujikura 22S Fusion Splicer, CT-30A Cleaver, S21A Sheath Clamp, ADC-19 AC Adapter, BTR-11 Battery Pack (installed), ACC-09 Power Cord, ELCT2-12 Spare Electrodes (pair), Operation Manual on CD, Quick Reference Guide, AP-01 Alcohol Container, SD01 Screwdriver and CC-32 Transit Case Fujikura 22S Fusion Splicer Kit 2 Includes: Fujikura 22S Fusion Splicer, CT-06A Cleaver, S21A Sheath Clamp, ADC-19 AC Adapter, BTR-11 Battery Pack (installed), ACC-09 Power Cord, ELCT2-12 Spare Electrodes (pair), Operation Manual on CD, Quick Reference Guide, AP-01 Alcohol Container, SD01 Screwdriver and CC-32 Transit Case One Year Extended Warranty Two Year Extended Warranty S016111 S016155 S016154 S012996 S013000 6 2016, AFL, all rights reserved. PP-4-00086, Revision 0, 1.8.16

Fujikura 22S Fusion Splicer Recommended Accessories for the 22S Cleavers FUSEConnect Accessories CT-06A Cleaver S015276 FH-FC-20 (900 µm within 2.0 mm sheathing) (each) S014696 CT-30A Cleaver S014080 FH-FC-30 (900 µm within 3.0 mm sheathing) (pair) S014695 Fiber Holders FH-FC-900 (900 µm cable) (each) S014697 FH-60-250 Fiber Holder (250 µm single fiber) S014548 CLAMP-FC-2000 (pair) S014705 FH-60-900 Fiber Holders (900 µm single fiber) S014549 CLAMP-FC-3000 (pair) S014704 FH-60-LT900 (900 µm loose buffer tube) S015181 Miscellaneous FH-60-LT900 Single Side Fiber Holder S015275 Worktable Set S016157 Sheath Clamps TS-01 Tripod Screw S015895 CLAMP-S21A Sheath Clamp S016160 ELCT2-12 Electrodes S014028 CLAMP-S21B Sheath Clamp S016161 ADC-19 AC Adapter S015523 Batteries ACC-09 Power Cord S014390 BTR-11 Battery Pack S016156 AP-01 Alcohol Container S015525 SD-01 Screwdriver S015526 CC-32 Transit Case S016158 PARAMETER VALUE Applicable Fibers Single-mode (G.652 & G.657), Multimode (G.651), DSF (G.653), NZDS (G.655) Cladding Diameter 125 μm Coating Diameter 100 μm to 3000 μm Fiber Cleave Length 5 mm to 16 mm Typical Average Splice Loss 0.03 db (SM), 0.01 db (MM), 0.05 db (DS) and 0.05 db (NZDS) Splicing Time Typical 9 sec with SM Arc Calibration Method Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available Splicing Modes Total 100 splice modes Splice Loss Estimate Based on dual camera cladding alignment data Storage of Splice Result Last 2,000 splices Fiber Display 4.7 inch TFT color LCD with X or Y view or both X and Y view simultaneously Magnification 200X magnification for X/Y view Viewing Method 2 axis CMOS camera Operating Condition Altitude: 0 to 3,660 m above sea level, -10 to 50 C, Humidity: 0 to 95% RH, non-dew Mechanical Proof Test 1.96 N Tube Heater 30 heating modes Tube Heating Time Typical 24 sec with FP-60 (60 mm) sleeve Protection Sleeve Length 60 mm, 40 mm, micro Splice/Heat Cycles with Battery Typical 200 cycles with BTR-11 Electrode Life 3,000 splices Power Supply Auto select from 100 V to 240 V with AC adapter, 14.8 V DC with installed battery Terminals USB 2.0 Wind Protection Maximum wind velocity of 15 m/s. (34 mph) Dimensions 120 x 189 x 71 (mm) / 4.72" x 7.44" x 2.8" (inches) Weight 1.14 kg (2.51 lbs) with battery 7 2016, AFL, all rights reserved. PP-4-00086, Revision 0, 1.8.16

19S In case with lid detached Fujikura 19S Fusion Splicer The Fujikura 19S is a low cost, fixed v-groove single fiber splicer with similar features found on the Fujikura 70S. Incorporating the proven ruggedized features pioneered by Fujikura, the 19S has added automated and enhanced user control features to increase splicing efficiency. A user programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splice process, and opening upon splice completion. Fully programmable auto open sheath clamps open one or both sheath clamps, after the tensile test, to prepare the fiber for removal. A new automated clamshell design tube heater applies heat to both sides of the splice protection sleeve resulting in a faster shrink time. Ruggedness and durability are greatly enhance by a mirror-less optical system and "severe-impact resistant" monitor. An innovative transit case doubles as a built-in or mobile workstation and makes splicing easier than ever before. Features Automated and programmable wind protector Fully ruggedized for shock, dust and moisture Li-ion battery with 180 splice/heat cycles per charge 5 mm cleave length for splice on connector or small package needs Sheath clamp or fiber holder operation On-board training and support videos Internet software upgrades Multi-function transit case with integrated workstation 19S Fusion Splicer (machine only) Includes: ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), S70C Sheath Clamp, USB Cable, Alcohol Pot, Screw Driver, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual and CC30 Transit Case with Carrying Strap 19S Fusion Splicer Kit (with cleaver) Includes: CT30A Cleaver, ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), S70C Sheath Clamp, USB Cable, Alcohol Dispenser, Screw Driver, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual, and CC30 Transit Case with Carrying Strap 19S Fusion Splicer Kit (with cleaver, battery and cord) Includes: BTR-09 Battery, DCC-18 Battery Charge Cord, CT30A Cleaver, ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), S70C Sheath Clamp, USB Cable, Alcohol Dispenser, Screw Driver, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual and CC30 Transit Case with Carrying Strap One Year Extended Warranty Two Year Extended Warranty S015679 S015680 S015681 S012996 S013000 8 2013, AFL, all rights reserved. PP-4-00072, Revision 3, 10.15.2014

Fujikura 19S Fusion Splicer Recommended Accessories for the 19S Cleavers CT-06A Cleaver CT-30A Cleaver Fiber Holders FH-60-250 Fiber Holder (pair) FH-60-900 Fiber Holder (pair) FH-60-LT900 Fiber Holder (pair) FH-60-LT900 Single Side Fiber Holder FUSEConnect Accessories FH-FC-20 (900 µm within 2.0 mm sheathing) (each) FH-FC-30 (900 µm within 3.0 mm sheathing) (pair) FH-FC-900 (900 µm cable) (each) CLAMP-FC-2000 (pair) CLAMP-FC-3000 (pair) Sheath Clamps CLAMP-S70C Sheath Clamp (Coating diameter from 100 µm - 1000 µm (5-16 mm cleave)) CLAMP-S70D Sheath Clamp (900 µm diameter loose tube fiber (5-16 mm cleave)) S015276 S014080 S014548 S014549 S015181 S015275 S014696 S014695 S014697 S014705 S014704 S015586 S015862 Batteries and Power Cords ADC-18 AC Adapter ACC-14 AC Power Cord BTR-09 Battery DCC-18 Battery Charge Cord DCC-12 Power Cord (connects AC Adapter to cigarette lighter socket) DCC-13 Power Cord (connects AC Adapter to power source via alligator clips) Miscellaneous ELCT2-20A Electrodes Portable Tripod Workstation (see product profile for more detail) ASW-02 Splicing Workstation (see product profile for more detail) JP-06 J-PLATE (70/19 Series) SL-01 Sleeve Loader Worktable Upper Worktable Lower Inner Box Set CC-30 USB Cable S015585 S014536 S015581 S015582 S013552 S013556 S013532 S014773 S010532 S016100 S015674 S015779 S015780 S015979 S015587 S014777 PARAMETER VALUE Model 19S Fusion Splicer Applicable Fibers Single-mode (G.652 & G.657), Multimode (G.651), DS (G.653), NZDS (G.655) Cladding Diameter 125 μm Coating Diameter 100 μm to 1,000 μm Fiber Cleave Length 5 to 16 mm Typical Average Splice Loss 0.05 db with SM, 0.02 db with MM, 0.08 db with DS, 0.08 db with NZDS, measured by cut-back method relevant to ITU-T and IEC standards Splicing Time SM FAST mode 9 seconds; SM AUTO mode 11 seconds; AUTO mode 11 seconds Arc Calibration Method Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available Splicing Modes 100 preset and user programmable modes Splice Loss Estimate Based upon dual camera cladding axis offset alignment data Storage of Splice Result Last 2,000 results to be stored in the internal memory Fiber Display X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation Magnification 320X for single X or Y view, or 200X for X and Y view Viewing Method Dual cameras with 4.73 inch TFT color LCD monitor Operating Condition 0 to 3,660 m above sea level, 0 to 95%RH and -10 to 50 C respectively Mechanical Proof Test 1.96 to 2.25N Tube Heater Built-in tube heater with 30 heating modes; auto-start function Tube Heating Time 17 seconds with FP3 (40), 5-16 seconds with Fujikura micro sleeves Protection Sleeve Length 60 mm, 40 mm, micro Splice/Heat Cycles with Battery Typical 180 cycles with power save functions activated Electrode Life 3,000 Arc Discharges Power Supply Auto voltage selection from 100 to 240 V AC or 10 to 15 V DC with ADC-18, 14.8 V DC with BTR-09 battery Terminals USB 1.1 (USB-B type) for PC communication. Mini-DIN (6-pin) for HJS-02/03 and SH-8 tube heater Wind Protection Maximum wind velocity of 15 m/s. (34 mph) Dimensions 146 W x 159 D x 150 H (mm) / 5.75 W x 6.25 D x 5.9 H (inches) Weight 2.3 kg (5.1 lbs) with AC adapter; 2.5 kg (5.5 lbs) with battery 9 2013, AFL, all rights reserved. PP-4-00072, Revision 3, 10.15.2014

12S (with Cleaver for scale) Workstation in Transit Case Fujikura 12S Fusion Splicer The Fujikura 12S is the world s smallest, lightest and most portable fusion splicer available today. Despite its incredibly small size, this ruggedized, full-featured unit offers unmatched versatility for splicing in the most challenging environments. The innovative transit case and work tray provide multiple options for the best utilization of available work space while the long life battery provides power for up to 100 splice cycles which include application of the splice protection sleeve. The Fujikura 12S incorporates features typically found only in more expensive models. The large 4.5" monitor provides a crystal clear image, even in the brightest sunlight, for evaluating splice quality. The electrode life has been extended to 3,000 splices, minimizing downtime for replacement and stabilization. Software updates are accomplished via the internet allowing users to quickly update their software as new splice programs become available. The fully ruggedized chassis provides for shock, dust and moisture protection while the two camera observation system provides for accurate fiber alignment and loss estimation calculations. The Fujikura 12S is also fully compatible with the FUSEConnect line of fusion installable connectors. Backed by the best service team in the industry, the Fujikura 12S is the ideal splicer to use when portability, ruggedness, versatility and reliability are needed for your splicing application. Features World s smallest splicer at 4.76"W x 6.38"D x 2.24"H Fully ruggedized for shock, moisture and dust resistance Transit case converts to easy to use workstation Dual camera, fixed v-groove alignment technology Extended life electrodes Long life battery (100 splices/shrinks per charge) Workstation on Transit Case Fujikura 12S Kit 1 Fujikura 12S Fusion Splicer Includes: Fujikura 12S Fusion Splicer, ADC-19 AC Adapter, BTR-10 Battery Pack (installed), FH-60-250 Fiber Holders (pair), FH-60-900 Fiber Holder, ACC-09 Power Cord, ELCT2-12 Spare Electrodes (pair), Operation Manual on CD, Quick Reference Guide, AP-01 Alcohol Container, SD01 Screwdriver and CC-29 Transit Case Fujikura 12S Fusion Splicer Kit 1 Includes: Fujikura 12S Fusion Splicer, CT-30 Cleaver, ADC-19 AC Adapter, BTR-10 Battery Pack (installed), FH-60-250 Fiber Holders (pair), FH-60-900 Fiber Holders (pair), ACC-09 Power Cord, ELCT2-12 Spare Electrodes (pair), Operation Manual on CD, Quick Reference Guide, AP-01 Alcohol Container, SD01 Screwdriver and CC-29 Transit Case Fujikura 12S Fusion Splicer Kit 2 Includes: Fujikura 12S Fusion Splicer, CT-06 Cleaver, ADC-19 AC Adapter, BTR-10 Battery Pack (installed), FH-60-250 Fiber Holders (pair), FH-60-900 Fiber Holders (pair), ACC-09 Power Cord, ELCT2-12 Spare Electrodes (pair), Operation Manual on CD, Quick Reference Guide, AP-01 Alcohol Container, SD01 Screwdriver and CC-29 Transit Case One Year Extended Warranty Two Year Extended Warranty S015521 S015522 S015530 S012996 S013000 10 2013, AFL, all rights reserved. PP-4-00028, Revision 4, 1.22.2015

Fujikura 12S Fusion Splicer Recommended Accessories for the 12S Cleavers CT-06 Cleaver (for single fibers) CT-30 Cleaver (for single to 12 ribbon fibers) Fiber Holders FH-60-250 Fiber Holder (pair) FH-60-900 Fiber Holder (pair) FH-60-LT900 Fiber Holder (pair) FH-60-LT900 Single Side Fiber Holder FUSEConnect Accessories FH-FC-20 (900 µm within 2.0 mm sheathing) (each) FH-FC-30 (900 µm within 3.0 mm sheathing) (pair) FH-FC-900 (900 µm cable) (each) CLAMP-FC-2000 (pair) CLAMP-FC-3000 (pair) S015588 S014076 S014548 S014549 S015181 S015275 S014696 S014695 S014697 S014705 S014704 Batteries BTR-10 Battery Pack Miscellaneous Worktable Set TS-01 Tripod Screw ELCT2-12 Electrodes ADC-19 AC Adapter ACC-09 Power Cord AP-01 Alcohol Container SD-01 Screwdriver CC-29 Transit Case USB Cable S015527 S015817 S015895 S014028 S015523 S014390 S015525 S015526 S015524 S014777 PARAMETER VALUE Model 12S Fusion Splicer Applicable Fibers Single-mode (G.652 & G.657), Multimode (G.651), DSF (G.653), NZDS (G.655) Cladding Diameter 125 μm Coating Diameter 250 μm or 900 μm Fiber Cleave Length 5 mm to 13 mm Typical Average Splice Loss 0.05 db (SM), 0.02 db (MM), 0.08 db (DS) and 0.08 db (NZDS) Splicing Time Typical 15 sec with SM Arc Calibration Method Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available Splicing Modes Total 100 splice modes Splice Loss Estimate Based on dual camera cladding alignment data Storage of Splice Result Last 2,000 splices Fiber Display 4.5 inch TFT color LCD with X or Y view or both X and Y view simultaneously Magnification 100X magnification for X/Y view Viewing Method 2 axis CMOS camera Operating Condition Altitude: 0 to 3,660 m above sea level, -10 to 50 C, Humidity: 0 to 95% RH, non-dew Mechanical Proof Test 1.96 N Tube Heater 30 heating modes Tube Heating Time Typical 30 sec with FP-03 (60 mm) sleeve Protection Sleeve Length 60 mm, 40 mm, micro Splice/Heat Cycles with Battery Typical 100 cycles with BTR-10 Electrode Life 3,000 splices Power Supply Auto select from 100 V to 240 V with AC adapter, 14.8 V DC with installed battery Terminals USB 2.0 Wind Protection Maximum wind velocity of 15 m/s. (34 mph) Dimensions 121 x 162 x 57 (mm) / 4.76 x 6.38 x 2.24 (inches) Weight.776 kg (1.71 lbs) with battery 11 2013, AFL, all rights reserved. PP-4-00028, Revision 4, 1.22.2015

70R In case with lid detached Fujikura 70R Fusion Splicer The Fujikura 70R is equipped with a precision, fixed v-groove for splicing single fibers or ribbon fiber up to 12 fibers. Incorporating the proven ruggedized features pioneered by Fujikura, the 70R has added automated and enhanced user control features to increase splicing efficiency. A user programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splice process, and opening upon splice completion. A new auto-start clamshell design tube heater applies heat to both sides of the splice protection sleeve resulting in a 40-second shrink time for 12-fiber ribbon. The result is a total splice process time of approximately 55 seconds! Ruggedness and durability are greatly enhanced by a mirror-less optical system and "severe-impact resistant" monitor. Battery capacity is now 110 splices/shrinks. An innovative transit case doubles as a built-in or mobile workstation and makes splicing easier than ever before. Features Automated and programmable wind protector 40-second automated tube heater Fully ruggedized for shock, dust and moisture Li-ion battery with 110 splices/shrinks per charge On-board training and support videos Internet software upgrades Multi-function transit case with integrated workstation 70R Fusion Splicer (machine only) Includes: ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), FH-50-12 Fiber Holder, USB Cable, Alcohol Dispenser, Screw Driver, Sleeve Loader, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual and CC30 Transit Case with Carrying Strap 70R Fusion Splicer Kit (with cleaver) Includes: CT30 Cleaver, HJS-02 Stripper, ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), FH-50-12 Fiber Holder, USB Cable, Alcohol Dispenser, Screw Driver, Sleeve Loader, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual and CC30 Transit Case with Carrying Strap 70R Fusion Splicer Kit (with cleaver, battery and cord) Includes: BTR-09 Battery, DCC-18 Battery Charge Cord, CT30 Cleaver, HJS-02 Stripper, ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), FH-50-12 Fiber Holder, USB Cable, Alcohol Dispenser, Screw Driver, Sleeve Loader, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual and CC30 Transit Case with Carrying Strap One Year Extended Warranty Two Year Extended Warranty S015669 S015670 S015671 S012996 S013000 12 2013, AFL, all rights reserved. PP-4-00071, Revision 3, 5.26.2015

Fujikura 70R Fusion Splicer Accessories Recommended for the 70R Cleavers and Strippers CT-30 Cleaver HJS-02 Hot Jacket Stripper Fiber Holders (pairs) FH-50-12 FH-50-10 FH-50-8 FH-50-6 FH-50-4 FH-50-2 FH-50-250 (250 μm coated single fiber) FH-50-900 (900 μm jacketed single fiber) FH-60-LT900 (pair) FH-60-LT900 Single Side Fiber Holder FUSEConnect Accessories FH-FC-20 (900 µm within 2.0 mm sheathing) (each) FH-FC-30 (900 µm within 3.0 mm sheathing) (pair) FH-FC-900 (900 µm cable) (each) CLAMP-FC-2000 (pair) CLAMP-FC-3000 (pair) S014076 S010340 S013828 S013824 S013820 S013816 S013812 S013808 S013800 S013804 S015181 S015275 S014696 S014695 S014697 S014705 S014704 Batteries and Power Cords ADC-18 AC Adapter BTR-09 Battery DCC-18 Battery Charge Cord DCC-12 Power Cord (connects ADC-13 to cigarette lighter socket) DCC-13 Power Cord (connects ADC-13 to power source via alligator clips) ACC-14 AC Power Cord Miscellaneous ELCT2-20A Electrodes Portable Tripod Workstation (see product profile for more detail) ASW-02 Splicing Workstation (see product profile for more detail) JP-06 J-PLATE (70/19 Series) FST-12 Fiber Separation Tool FAT-04 Fiber Arrangement Tool FAA-03A Ribbon Forming Adhesive (4 oz. bottle) FAA-03A Ribbon Forming Adhesive (0.5 liter bottle) CC-30 Transit Case S015585 S015581 S015582 S013552 S013556 S014536 S013532 S014773 S010532 S016100 S014012 S010212 S008720 S008622 S015587 PARAMETER VALUE Model FSM-70R Fusion Splicer Applicable Fibers Single-mode (G.652 & G.657), Multimode (G.651), DS (G.653), NZDS (G.655) Fiber Count Single, 2, 4, 5, 6, 8, 10, 12 Cladding Diameter 125 µm Coating Diameter Ribbon: 0.25 mm to 0.4 mm, Single: 250 µm and 900 µm Fiber Cleave Length 10 mm Typical Average Splice Loss 0.05 db with SM, 0.02 db with MM, 0.08 db with DS, 0.08 db with NZDS; measured by cut-back method relevant to ITU-T standards Splicing Time Typical 15 seconds with standard single-mode fiber Arc Calibration Method Automatic, real-time by using results of previous splice when in AUTO mode; manual arc calibration function available Splicing Modes 100 preset and user programmable modes Splice Loss Estimate Based upon dual camera cladding alignment data Storage of Splice Result Last 2000 splice results stored in the internal memory Fiber Display X or Y, or both X and Y simultaneously; front or rear monitor display options with automatic image orientation Magnification 35X to 90X Viewing Method Dual cameras with 4.7 inch TFT color LCD monitor with anti-reflective coating Operating Condition 0 to 3,660 m above sea level, 0 to 95% RH, and -10 to 50 C respectively Mechanical Proof Test 1.96 to 2.25 N Tube Heater Built-in tube heater with 30 heating modes; auto-start function Tube Heating Time Typical 40 seconds with FP-5 sleeve, 17 seconds with FP3 (40), 5-15 seconds with Fujikura micro sleeves Protection Sleeve Length 60 mm, 40 mm, Micro Splice/Heat Cycles with Battery Typical 110 cycles with power save functions activated Electrode Life 1,500 Arc Discharges Power Supply Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-18, 14.8V DC with BTR-09 battery Terminals USB 2.0 (USB-B type) for PC communication and Mini-DIN (6-pin) for HJS-02/03 Wind Protection Maximum wind velocity of 15m/s (34 mph) Dimensions 146 W x 159 D x 150 H (mm) / 5.7 W x 6.3 D x 5.9 H (inches) Weight 2.3 kg (5.1 lbs) with AC adapter; 2.5 kg (5.5 lbs) with battery 13 2013, AFL, all rights reserved. PP-4-00071, Revision 3, 5.26.2015

19R In case with lid detached Fujikura 19R Fusion Splicer The Fujikura 19R is equipped with a precision, fixed v-groove for splicing single fibers or ribbon fiber up to 4 fibers. Incorporating the proven ruggedized features pioneered by Fujikura, the 19R has added automated and enhanced user control features to increase splicing efficiency. A user programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splice process, and opening upon splice completion. A new auto-start clamshell design tube heater applies heat to both sides of the splice protection sleeve resulting in a 18-second shrink time for 4-fiber ribbon. The result is a total splice process time of approximately 29 seconds! Ruggedness and durability are greatly enhance by a mirror-less optical system and "severe-impact resistant" monitor. Battery capacity is now 140 splices/shrinks. An innovative transit case doubles as a built-in or mobile workstation and makes splicing easier than ever before. Features Automated and programmable wind protector 18-second automated tube heater Fully ruggedized for shock, dust and moisture Li-ion battery with 140 splices/shrinks per charge On-board training and support videos Internet software upgrades Multi-function transit case with integrated workstation 19R Fusion Splicer (machine only) Includes: ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), FH-50-4 Fiber Holder, USB Cable, Alcohol Dispenser, Screw Driver, Sleeve Loader, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual and CC30 Transit Case with Carrying Strap 19R Fusion Splicer Kit (with cleaver) Includes: CT30 Cleaver, ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), FH-50-4 Fiber Holder, FH-50-250 Fiber Holder, FH-50-900 Fiber Holder, HJS-02 Stripper, USB Cable, Alcohol Dispenser, Screw Driver, Sleeve Loader, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual and CC30 Transit Case with Carrying Strap 19R Fusion Splicer Kit (with cleaver, battery and cord) Includes: BTR-09 Battery, DCC-18 Battery Charge Cord, CT30 Cleaver, ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), FH-50-4 Fiber Holder, FH-50-250 Fiber Holder, FH-50-900 Fiber Holder, HJS-02 Stripper, USB Cable, Alcohol Dispenser, Screw Driver, Sleeve Loader, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual and CC30 Transit Case with Carrying Strap One Year Extended Warranty Two Year Extended Warranty S015659 S015660 S015661 S012996 S013000 14 2013, AFL, all rights reserved. PP-4-00073, Revision 3, 5.26.2015

Fujikura 19R Fusion Splicer Recommended Accessories for the 19R Cleavers and Strippers CT-06 Cleaver CT-30 Cleaver HJS-02 Hot Jacket Stripper Fiber Holders FH-50-250 FH-50-900 FH-50-4 FH-50-2 FH-60-LT900 (pair) FH-60-LT900 Single Side Fiber Holder FUSEConnect Accessories FH-FC-20 (900 µm within 2.0 mm sheathing) (each) FH-FC-30 (900 µm within 3.0 mm sheathing) (pair) FH-FC-900 (900 µm cable) (each) CLAMP-FC-2000 (pair) CLAMP-FC-3000 (pair) S015588 S014076 S010340 S013800 S013804 S013812 S013808 S015181 S015275 S014696 S014695 S014697 S014705 S014704 Batteries and Power Cords ADC-18 AC Adapter ACC-14 AC Power Cord BTR-09 Battery DCC-18 Battery Charge Cord DCC-12 Power Cord (connects AC Adapter to cigarette lighter socket) DCC-13 Power Cord (connects AC Adapter to power source via alligator clips) Miscellaneous ELCT2-20A Electrodes Portable Tripod Workstation (see product profile for more detail) ASW-02 Splicing Workstation (see product profile for more detail) JP-06 J-PLATE (70/19 Series) FST-12 FAT-04 Fiber Arrangement Tool FAA-03A Ribbon Forming Adhesive (4 oz. bottle) FAA-03A Ribbon Forming Adhesive (0.5 liter bottle) USB Cable CC-30 Transit Case S015585 S014536 S015581 S015582 S013552 S013556 S013532 S014773 S010532 S016100 S014012 S010212 S008720 S008622 S014777 S015587 PARAMETER VALUE Model FSM-19R Fusion Splicer Applicable Fibers Single-mode (G.652 & G.657), Multimode (G.651), DS (G.653), NZDS (G.655) Fiber Count Single, 2, 4 Cladding Diameter 125 µm Coating Diameter Ribbon: 0.25 mm to 0.4 mm; Single: 250 µm and 900 µm Fiber Cleave Length 10 mm Typical Average Splice Loss 0.05 db with SM, 0.02 db with MM, 0.08 db with DS, 0.08 db with NZDS, measured by cut-back method relevant to ITU-T standards Splicing Time SM FAST mode - 11 seconds; SM AUTO mode - 15 seconds; Auto mode - 15 seconds Arc Calibration Method Automatic, real-time by using results of previous splice when in AUTO mode, manual arc calibration function available Splicing Modes 100 preset and user programmable modes Splice Loss Estimate Based upon dual camera cladding alignment data Storage of Splice Result Last 2000 splice results stored in the internal memory Fiber Display X or Y, or both X and Y simultaneously; front or rear monitor display options with automatic image orientation Magnification 90X Viewing Method Dual cameras with 4.7 inch TFT color LCD monitor with anti-reflective coating Operating Condition 0 to 5,000 m above sea level, 0 to 95% RH, -10 to 50 C respectively Mechanical Proof Test 1.96 to 2.25 N Tube Heater Built-in tube heater with 30 heating modes; auto-start function Tube Heating Time Typical 40 seconds with FP-5 sleeve, 17 seconds with FP3 (40), 5-16 seconds with Fujikura micro sleeves Protection Sleeve Length 60 mm, 40 mm, micro Splice/Heat with Battery Typical 140 cycles with power save functions activated Electrode Life 2,000 Arc Discharges Power Supply Auto voltage selection from 100 to 240V AC or 10 to 15V DC with AC Adapter, 13.2V DC with battery Terminals USB 2.0 (USB-B type) for PC communication, Mini-DIN (6-pin) for HJS-02/03 Wind Protection Maximum wind velocity of 15m/s (34 mph) Dimensions 146 W x 159 D x 150 H (mm) / 5.7 W x 6.3 D x 5.9 H (inches) Weight 2.3 kg (5.1 lbs) with AC adapter; 2.5 kg (5.5 lbs) with battery 15 2013, AFL, all rights reserved. PP-4-00073, Revision 3, 5.26.2015

12R (with Cleaver for scale) Workstation in Transit Case Fujikura 12R Fusion Splicer The Fujikura 12R is the world s smallest, lightest and most portable fusion splicer available today. Despite its incredibly small size, this ruggedized, full-featured unit offers unmatched versatility for splicing in the most challenging environments. The innovative transit case and work tray provide multiple options for the best utilization of available work space while the long life battery provides power for up to 100 splice cycles which include application of the splice protection sleeve. The Fujikura 12R incorporates features typically found only in more expensive models. The large 4.5" monitor provides a crystal clear image, even in the brightest sunlight, for evaluating splice quality. The electrode life has been extended to 1,500 splices, minimizing downtime for replacement and stabilization. Software updates are accomplished via the internet allowing users to quickly update their software as new splice programs become available. The fully ruggedized chassis provides for shock, dust and moisture protection while the two camera observation system provides for accurate fiber alignment and loss estimation calculations. The Fujikura 12R is also fully compatible with the FuseConnect line of fusion installable connectors. Backed by the best service team in the industry, the Fujikura 12R is the ideal splicer to use when portability, ruggedness, versatility and reliability are needed for your splicing application. Features World s smallest splicer at 4.76"W x 6.38"D x 2.24"H Fully ruggedized for shock, moisture and dust resistance Transit case converts to easy to use workstation Dual camera, fixed v-groove alignment technology Extended life electrodes Long life battery (100 splices/shrinks per charge) Workstation on Transit Case Fujikura 12R Fusion Splicer Includes: ADC-19 AC Adapter, BTR-10 Battery Pack (installed), FH-50-4 Fiber Holders (Pair), ACC-09 Power Cord, ELCT2-12 Spare Electrodes (Pair), Operation Manual on CD, Quick Reference Guide, AP-01 Alcohol Container, SD01 Screwdriver and CC-29 Transit Case Fujikura 12R Fusion Splicer Kit Includes: CT-30 Cleaver, ADC-19 AC Adapter, BTR-10 Battery Pack (installed), FH-50-4 Fiber Holders (Pair) FH-50-250 Fiber Holders (Pair), FH-50-900 Fiber Holders (Pair), ACC-09 Power Cord, HJS-03 Hot Jacket Stripper, ELCT2-12 Spare Electrodes (Pair), Operation Manual on CD, Quick Reference Guide, AP-01 Alcohol Container, SD01 Screwdriver and CC-29 Transit Case S015571 S015667 Fujikura 12R Kit 16 2013, AFL, all rights reserved. PP-4-00060, Revision 1, 2.3.2014

Fujikura 12R Fusion Splicer Recommended Accessories for the 12R Cleavers & Strippers CT-30 Cleaver (for single to 12 ribbon fibers) HJS-03 Battery Powered Hot Jacket Stripper Fiber Holders FH-50-2 (2 ribbon fiber) FH-50-4 (4 ribbon fiber) FH-50-250 (250 µm single fiber) FH-50-900 Fiber Holders (900 µm single fiber) FH-60-LT900 (900 µm loose buffer tube) FH-60-LT900 Single Side Fiber Holder FUSEConnect Accessories FH-FC-20 (900 µm within 2.0 mm sheathing) (each) S014076 S013996 S013808 S013812 S013800 S013804 S015181 S015275 S014696 Batteries BTR-10 Battery Pack Miscellaneous Worktable Set TS-01 Tripod Screw ELCT2-12 Electrodes ADC-19 AC Adapter ACC-09 Power Cord AP-01 Alcohol Container SD-01 Screwdriver CC-29 Transit Case S015527 S015817 S015895 S014028 S015523 S014390 S015525 S015526 S015524 FH-FC-30 (900 µm within 3.0 mm sheathing) (pair) S014695 FH-FC-900 (900 µm cable) (each) S014697 CLAMP-FC-2000 (pair) S014705 CLAMP-FC-3000 (pair) S014704 PARAMETER VALUE Model Fujikura 12R Fusion Splicer Applicable Fibers Single-mode (G.652 & G.657), Multimode (G.651), DS (G.653), NZDS (G.655) Fiber Count Single to 4-fiber ribbon Cladding Diameter 125 μm Coating Diameter 250 μm and 900 μm Fiber Cleave Length 10 mm Typical Average Splice Loss 0.05 db (SM), 0.02 db (MM), 0.08 db (DS) and 0.08 db (NZDS) Splice Time Typical 20 sec with SM Arc Calibration Method Automatic, real-time by using results of previous splice when in AUTO mode, manual arc calibration function available Splicing Modes Total 100 splice modes Splice Loss Estimate Based upon dual camera cladding alignment data Storage of Splice Result Last 2,000 splices Fiber Display 4.5 inch TFT color LCD with X or Y view or both X and Y view simultaneously Magnification 66X magnification in X or Y view; 33X magnification in X and Y view Viewing Method 2 axis CMOS camera Operating Condition 0 to 3,660 m above sea level (single fiber),0 to 95% RH non-dew, -10 to 50 C respectively Mechanical Proof Test 1.96 to 2.25 N Tube Heater 30 heating modes Tube Heater Time Typical 30 sec with FP-03 (60 mm) and FP-04 sleeves Protection Sleeve Length 60 mm, 40 mm, micro Splice/Heat with Battery Typical 100 cycles with BTR-10 Electrode Life 1,500 splices Power Supply Auto select from 100V to 240V with AC adapter, 14.8 V DC with installed battery Terminals USB 2.0 Wind Protection Maximum wind velocity of 15 m/s. (34 mph) Dimensions 121W x 162D x 57H (mm) / 4.76 W x 6.38 D x 2.24 H (inches) Weight with Battery 776 g / 1.71 lbs. 17 2013, AFL, all rights reserved. PP-4-00060, Revision 1, 2.3.2014

CT-06 Fiber Cleaver The CT-06 fiber optic cleaver is an improved version of the previously released CT-05 providing high quality cleaving at an economical price. Designed for cleaving single fibers only, this cleaver is best suited for the installation of field installable connectors and mechanical splices. The rugged yet scaled-down design offers cleave quality approaching that of more expensive high precision cleavers. The long-life, 16-position circular blade performs cleaving operation in one single step. A manual scrap collector is included. Features Dedicated for single fiber cleaving Simple and single-step operation Blade life up to 48,000 cleaves Compact and light weight Equipped with fiber scrap collector Shown in CC-28 Carrying Case PARAMETER Applicable Fiber Fiber Count Coating Diameter VALUE Conventional silica optical fiber Single fiber Cladding Diameter 125 µm 0.25 to 0.9 mm Cleave Length CT-06-10 mm with fiber holder CT-06A - 5 to 20 mm with 250 μm coated fiber CT-06A - 10 to 20 mm with 900 μm fiber Cleave Angle Capability Average 1 Dimensions (W x D x H) 113.5 mm x 82 mm x 42 mm (4.5" x 3.2" x 1.7") Weight 225 g (0.5 lbs) Blade Lifetime 48,000 fibers (1,000 fibers x 3 heights x 16 positions) Included with Cleaver: AD-10 Adapter Plate (CT-06A) CC-28 Carrying Case Hex Wrench Scrap Collector Instruction Manual APPLICATION FIBER HANDLING SYSTEM CLEAVE LENGTH CT-06 Single Fibers: 250 to 900 µm coating, 125 µm cladding Purchased seperately FH-50-250 FH-60-250 FH-50-900 FH-60-900 10 mm S015588 CT-06A Accessories Single Fibers: 250 to 900 µm coating, 125 µm cladding CB-05 Replacement Blade for CT-06 Cleaver CC-28 Carrying Case for CT-06 Cleaver AD-10 Single Fiber Adapter Plate AD-30B Adapter Plate (16 mm cleave length) AD-30C Adapter Plate for 2 & 3mm Cord AD-10 Adapter Plate (Included) 250 µm: 5 to 20 mm 900 µm: 8 to 20 mm S015276 S015689 S015700 S014817 S014100 S015896 18 2013, AFL, all rights reserved. PP-4-00065, Revision 2, 10.15.14

*Delivered as shown CT-30 Fiber Cleaver The CT-30 Cleaver sets the standard for portability, reliability and ease of use. Available for either single fiber or ribbon splicing (up to 12 fiber ribbons) applications, the CT-30 Cleavers are compatible with all AFL fusion splicers. The improved version offers a larger base for a more stable platform, improved visibility when placing the fiber, and three scrap collection options. Designed for excellent portability, the CT-30 is equally at home in a splicing van or in a bucket truck and is ideal for FTTx applications. The 16-position blade yields 48,000 single-fiber cleaves, or 4,000 12-fiber ribbon cleaves before requiring replacement, and the built-in scrap collector conveniently stores fiber shards until they can be safely discarded. The CT-30 Cleaver is packaged with three scrap collection options that allow the user to tailor it to their cleaving preferences. The CT30 is delivered with the SC-01 Side Cover installed for users that prefer not to use an automated scrap collection system. For those that prefer an automated scrap collection system, the FC-02 Fiber Collector and two scrap box options are included. The FDB-02 Scrap Box is a smaller bin for users seeking a compact profile. The FDB-03 Scrap Box is a larger bin with sweeping brush and static resistant surfaces for those users seeking to maximize scrap capacity. All scrap options are easily configured by the user. PARAMETER VALUE Applicable Fiber Conventional silica optical fiber Fiber Count Single and up to 12 fiber ribbon Coating Diameter 250 μm to 900 μm Cladding Diameter 125 μm Cleave Angle Capability typically <0.5 Blade lifetime 48,000 fiber cleaves (4,000 12-fiber cleaves) Dimensions (W x D x H) 69 mm x 82 mm x 41 mm (2.7" x 3.2" x 1.6") Weight 180 g (0.4 lbs) Shown in CC-21 Carrying Case APPLICATION FIBER HANDLING SYSTEM CLEAVE LENGTH CT-30 Fiber Ribbons Fiber Holders for the following: 10 mm S014076 (up to 12 fibers) FH-XXX, FH-50-XXX or FH-60-XXX versions CT-30A Single Fibers: 250-900 µm coating, 125 µm cladding AD-30A Adapter Plate 900 µm: 10-20 mm 250 µm: 6-20 mm S014080 Included with Cleaver: AD-30A Adapter Plate (CT30A only) FC-02 Fiber Collector FDB-02 Scrap Box (small) FDB-03 Scrap Box (large) SC-01 Side Cover (installed) CC-21 Carrying Case Hex Wrench (1.5 mm) Instruction Manual Accessories Replacement Blade for CT-30 Series Cleavers FC-02 Fiber Collector AD-30A Adapter Plate AD-30B Adapter Plate (Fixed 16 mm cleave length) AD-30C Adapter Plate for 2 & 3mm Cord FDB-02 Fiber Collector Scrap Box FDB-03 Large Fiber Collector Scrap Box SC-01 Side Cover HBA-01 Fiber Holder Base Attachment CC-21 Carrying Case for CT-30 Series Cleaver S012828 S014092 S014096 S014100 S015896 S014104 S014483 S014353 S014388 S014484 19 2002, AFL, all rights reserved. PP-4-00011, Revision 3, 2.3.14

CT-02 Pocket Cleaver The CT-02 Pocket Cleaver is the ideal, low cost solution for mechanical splicing and temporary terminations that don t require the precision of a high end cleaver. The new and improved version now includes a graduated scale for measuring cleave lengths from 6 to19 mm in both 1 mm steps and 2 mm steps. The CT-02 is not recommended for cleaving single-mode fibers prior to fusion splicing. PARAMETER Fiber count Fiber type VALUE Single Silica fiber Coating diameter 200 to 1000 µm Cladding diameter 125 µm Cleaving length Cleaving angle Blade life Dimensions Weight 6-19 mm Typical 1.0 degree 1000 times 100 mm (W) x 20 mm (D) x 35 mm (H) 75 g CT-02 (6-19 mm) S009836 20 2004, AFL, all rights reserved. PP-4-00006, Revision 1, 2.7.11

HJS-02 Hot Jacket Strippers The HJS-02, HJS-03 and HJS-03-24 hot jacket strippers provide superior ribbon andfield-ribbonized stripping performance. They conserve energy with a Power Save feature when the splicer is operated by battery power. A temperature selection switch provides easy field optimization for different fibers or operating conditions. An optional single-fiber adapter may be used to provide easy single-fiber capability for difficult-to-strip fibers. These strippers accept all Fujikura field and factory splicer designed fiber holders. The HJS-03 is a battery powered hot jacket stripper specifically designed for use withthe SpliceMate fusion splicer but it can be used in other applications. The HJS-03-24 hot jacket stripper is designed for smooth and controlled stripping of 24-fiber ribbon. HJS-03 MODEL HJS-02, HJS-03 HJS-03-24 Applicable Fiber Count 1 to 12 Fiber Ribbon 1 to 24 Fiber Ribbon Ribbon Thickness 250 µm to 400 µm 250 µm to 400 µm Stripping Length 35 mm maximum 35 mm maximum Typical Heating Time 3 second Normal Mode 8 second Power Save Mode 3 second Normal Mode 30 second Power Save Mode Standard Heating Temperature 100ºC 100ºC Dimensions (W x D x H) 107 mm x 40 mm x 29 mm 149 mm x 58 mm x 36 mm Weight 195 g (0.43lb) 300 g (0.66 lb) Power Supply 12V DC 12V DC Operating Conditions -10ºC to 50ºC -10ºC to 50ºC Storage Conditions -40ºC to 80ºC -40ºC to 80ºC HJS-03-24 with Power Assist Tool Strippers HJS-02 Hot Jacket Stripper (12 fibers max.) Includes DCC-11 HJS-02-80 Hot Jacket Stripper (80 µm cladding) Includes DCC-11 HJS-03 Battery Powered Hot Jacket Stripper HJS-03-24 Hot Jacket Stripper (24 fibers max.) HJS-03-24PA Power Assist Tool for HJS-03-24 AC Power Operation ADC-09 AC Adapter (for HJS-02, HJS-03 and HJS-03-24) ACC-09 AC Power Cord (for ADC-09) DC Power Operation DCC-11 DC Power Cord for HJS-02/HJS-03 (for FSM-17R/50R/18R/60R) DCC-03 DC Power Cord for HJS-02/HJS-03 (for FSM-30R/40R24) Miscellaneous SAD-01 Single Fiber Adapter for HJS-02 S010340 S013264 S013996 S012960 S012964 S014389 S014390 S013852 S006126 S010428 21 2002, AFL, all rights reserved. PP-4-00031, Revision 4, 8.7.12

Splice Protection Sleeves AFL offers a wide selection of fiber protection sleeves to meet any application. The FP series is the industry standard for durable and lasting protection of single fiber splices in field installations, while the FP-04(T) and FP-05 provide the same durable protection for 8 and 12 fiber ribbon respectively. The FPS01 and FPS04 series are specially designed for optical components, where small packaging is a priority. These micro sleeves provide the known reliability of Fujikura sleeves in the smallest possible lengths. This easy and cost effective method is a great alternative to recoating. The FPS01 and FPS04 series offer a wide range of options to accommodate various coating sizes, and are manufactured in a variety of lengths. This gives great flexibility in designing optical modules. Standard Sleeves: Dimensions & Applicable Fiber SLEEVES FOR SINGLE FIBERS UP TO 900 MICRONS SLEEVE LENGTH FIBER CLEAVE LENGTH SLEEVE DIAMETER AFTER SHRINK PACKAGING FP-60 60 mm 16 mm 3.1 mm (max.) 1000 Box/100 Pack S015915 FP-40 40 mm 10 mm 3.1 mm (max.) 1000 Box/100 Pack S015916 FP-03(34) 34 mm 10 mm 3.1 mm (max.) 500 Box/10 Pack S000453 SLEEVES FOR TFOCA CABLE (DUAL 900 μm) FIBER COUNT SLEEVE LENGTH FIBER CLEAVE LENGTH SLEEVE DIAMETER AFTER SHRINK PACKAGING FP-D900 2 40 mm 10 mm 3.6 mm (max.) 1000 Box & 50 Pack S014413 SLEEVES FOR RIBBON FIBERS FIBER COUNT SLEEVE LENGTH FIBER CLEAVE LENGTH SLEEVE DIAMETER AFTER SHRINK PACKAGING FP-04(T) Up to 8 fibers 40 mm 10 mm 4.1 mm (max.) 250 Box/25 Pack S002105 FP-05 Up to 12 fibers 40 mm 10 mm 4.5 mm (max.) 250 Box/5 Pack S003027 FP-05-28 Up to 12 fibers 28 mm 10 mm 4.5 mm (max.) 250 Box/25 Pack S014720 FPS04-30 Up to 4 fibers 30 mm 10 mm 2.4 mm (max.) 1,000 Box/25 Pack S010848 FPS08-28 Up to 8 fibers 28 mm 10 mm 3.4 mm (max.) 500 Box/25 Pack S013560 FPS24-40 Up to 24 fibers 40 mm 10 mm 8 mm (max.) 200 Box/5 Pack S013004 PARAMETER VALUE Outer tube FP-60/40/03 series FP-04(T) / FP-05 Polyethylene Inner tube Ethylene-Vinyl Acetate (Polyolefin Copolymer) Strength member Operation condition (after shrink) Storage condition (before shrink) FP-60/40/03 series FP-04(T) / FP-05 Stainless steel Quartz glass -40 to 75 C, 0 to 95% RH (Non dew) -40 to 60 C, Non dew FP-03 series FPS01 series FP-40 series FP-60 series FP-04(T)/05 FPS04-30 FPS08-28 22 2002, AFL, all rights reserved. PP-4-00051, Revision 5, 8.1.14

Splice Protection Sleeves Micro Sleeves: Dimensions & Applicable Fiber FPS01-400 SERIES FOR SINGLE FIBERS UP TO 400 MICRON FIBER SLEEVE LENGTH FIBER CLEAVE LENGTH SLEEVE DIAMETER AFTER SHRINK PACKAGING FPS01-400-12 12 mm 4 mm 1.5 mm 50 Pack S014088 FPS01-400-15 15 mm 4 mm 1.5 mm 50 Pack S012668 FPS01-400-20 20 mm 8 mm 1.5 mm 50 Pack S012672 FPS01-400-25 25 mm 10 mm 1.5 mm 50 Pack S012676 FPS01-400-34 34 mm 15 mm 1.5 mm 50 Pack S012680 FPS01-400-40 40 mm 16 mm 1.5 mm 1,250 Box S011914 FPS01-900 SERIES FOR SINGLE FIBERS UP TO 900 MICRON FIBER SLEEVE LENGTH FIBER CLEAVE LENGTH SLEEVE DIAMETER AFTER SHRINK PACKAGING FPS01-900-15 15 mm 4 mm 2.3 mm 50 Pack S012684 FPS01-900-20 20 mm 6 mm 2.3 mm 50 Pack S012688 FPS01-900-25 25 mm 6 mm 2.3 mm 50 Pack S011954 FPS01-900-34 34 mm 13 mm 2.3 mm 50 Pack S012692 FPS01-900-45 45 mm 16 mm 2.3 mm 50 Pack S012696 PARAMETER MODEL VALUE Outer tube FPS01 series / FPS04-30 Polyethylene Inner tube Strength member Operation condition (after shrink) Storage condition (before shrink) FPS01 series FPS04-30 / FPS08-28 Ethylene-Vinyl Acetate (Polyolefin Copolymer) Stainless steel Quartz glass -40 to 75 C, 0 to 95% RH (Non dew) -40 to 60 C, Non dew Type Variations FULL SCALE 23 2002, AFL, all rights reserved. PP-4-00051, Revision 5, 8.1.14

FST-12 Fiber Separation Tool The FST-12 Fiber Separation Tool is used to quickly, accurately and reliably split ribbons into sub-groups or individual fibers. The ergonomic FST-12 design enables safe and reliable, one-handed operation for use in diverse fiber deployment environments, such as aerial and remote-site applications. Features and Benefits Enables separation of groups of fibers or single fibers and is not limited to only even-numbered groupings. One-handed operation allows the operator s other hand to guide and control the ribbon at all times, minimizing the potential for accidental damage to the fibers or ribbon. Hand-held method eliminates the need to utilize valuable work surface space for operation and is the ideal solution for remote-site and aerial operations such as bucket truck or ladder-sling applications. Performing two overlapping separations of the ribbon allows any single fiber or any sub-group of fibers to be extracted from the ribbon, even in mid-span taut-sheath operations where minimal ribbon length is available. Standard tool designed for fiber counts up to 12-fiber ribbon. PARAMETER Ribbon Thickness Ribbon Width Fiber Pitch Fiber Coating Material VALUE 250 to 360 micron 3.2 mm (12-fiber) 250 micron UV cured resin Separation Ratios: 12-fiber Ribbon 1:11, 2:10, 3:9, 4:8, 5:7, 6:6 Environmental Conditions: Operating Temperature Storage Temperature Dimensions Weight -10 to +40 C, 0 to 95% RH (non-dew) -40 to +80 C, 0 to 95% RH (non-dew) 157 L x 27 W x 124 H (mm) 6.18 L x 1.06 W x 4.88 H (in.) 220 g / 7.76 oz. FST-12 Fiber Separation Tool Includes: 12-fiber ribbon jaw set, instructional manual and color coded quick reference guide S014012 24 2005, AFL, all rights reserved. PP-4-00016, Revision 2, 2.7.11

Fiber Arrangement Tool The FAT-04 features an easy-to-use fiber arrangement method utilizing linear travel. The FAT-04 includes a spare paste applicator to allow ribbon making to continue even if one of the paste applicators needs cleaning. FAT-04 FAT-04 Fiber Arrangement Tool* SP-1 Foam Pads for FAT-04 (One set = 5 sheets of 25 pads each) Paste Applicator Blocks for FAT-04 (2 pieces) S010212 S009016 S010952 * FAT-04 includes 4 oz. FAA-03A ribbon forming adhesive, paste applicator blocks, cleaning swabs, CL-02 clips and SP-1 foam pads Ribbon Forming Adhesive A key advantage of our fiber arrangement tool is the use of the ribbon forming adhesive. Ribbons formed with this adhesive have excellent stripability, especially compared to ribbonizing methods using tape. Unlike tape methods, the paste does not gum-up the stripping tool and cause broken fibers. The paste holds the stripped coating residue into a single piece of debris that is easily cleaned from the stripper. If needed, the ribbon can be easily separated into individual fibers using alcohol. FAA-03A FAA-03A ribbon-forming adhesive (0.5 liter bottle) FAA-03A ribbon-forming adhesive (4 oz. dispensing bottle) S008622 S008720 25 2002, AFL, all rights reserved. PP-4-00015, Revision 4, 5.15.15

Splicer V-groove Cleaning Kit Today s splicing equipment is fast, efficient, and requires minimal maintenance due to advances in splicing technology. However, contamination in the V-groove of the splicer is still a primary source of trouble for the splicing technician. This is especially problematic when splicing with a fixed V-groove fusion splicer. Environmental contamination, such as dust, dirt and fiber coating debris, as well as the silica deposits generated during the fusion process eventually find their way to the surface of the v-groove. This contamination will offset the fibers and degrade performance. To help control this problem, a disciplined cleaning regimen and specific tooling is required to ensure the splice is right the first time. To solve cleaning needs, AFL offers the Splicer V-groove Cleaning Kit. This product integrates eight components into an affordable and effective inspection and cleaning solution for any fusion splicer. Small and lightweight, it fits easily into the Fujikura splicer transit case or it can be carried separately in its own carrying case. Kit Includes Scrubber Brush with stiff tapered nylon bristles Sweeper Brush with soft nylon bristles Eye Loupe with 3X to 12X magnification LED Pen Light with momentary or constant on switching Cleaning Fluid that is nonflammable and environmentally safe Lint-free Cotton Swabs Instruction Sheet with illustrations Canvas Carrying Case Refill Kit Includes To replenish the consumables within the kit, AFL provides a refill kit that includes the following components: Splicer V-groove Cleaning Refill Kit One can of FPF1 Cleaning Fluid One Scrubber Brush One Sweeper Brush Ten packs CS-1 Cotton Swabs (250 swabs) Splicer V-groove Cleaning Kit Splicer V-groove Cleaning Refill Kit CS-1 Cotton Swabs (pack of 25 swabs) S014397 S014416 S003719 CS-1 Cotton Swabs 26 2006, AFL, all rights reserved. PP-4-00058, Revision 2, 2.7.11

Portable Tripod Workstation Kit (splicer and cleaver not included) Cleaver mount assembly swings into and out of the work space Portable Tripod Workstation As splicing requirements have migrated from aerial to ground level locations, a sturdy splicing workstation with the ability to adjust for uneven ground surfaces has been missing from the splicing marketplace. That problem is solved with AFL s Portable Tripod Workstation the critical missing link in splicing productivity. The Portable Tripod Workstation offers both a sturdy work tray to support the splicer, cleaver and accessories, and a tripod to support the work tray. The two can be purchased together as a kit or separately for those users who prefer to use their own tripod or mounting mechanism. The work tray incorporates a unique cleaver mounting system that offers flexibility and convenience for the user. The cleaver mounting arm pivots into and out of the work space, as needed, and securely captures the CT-30, CT-20 and CT-04 style cleavers. The base of the cleaver mounting assembly can be moved to any one of four positions on the tray to accommodate user preferences. The tripod is solidly constructed but lightweight, weighing less than six pounds, and collapses to a length of only twenty-five inches. The telescoping legs offer flexible height adjustments from thirteen inches to sixty-one inches and the leg angle can be increased for unusual surfaces. Features Sturdy work tray supports the splicer, cleaver and accessories Tripod supports a load capacity of up to eleven pounds Independent telescoping tripod legs support uneven work surfaces Leveraged handles securely lock work tray into position Cleaver mount assembly swings cleaver into and out of the work space Optional cleaver mounting positions accommodate user preferences Compatible with all FSM-17, FSM-18, FSM-50, FSM-60 and 12/19/70 series models 2 3 1 4 Portable Work Tray showing the four mounting positions of the cleaver mount assembly (delivered as shown) Portable Tripod Workstation Kit Includes: Tripod with pan head and quick release platform (make and model of tripod may change without notice), portable work tray with cleaver mount assembly and canvas carrying case Portable Work Tray Includes: Portable work tray with cleaver mount assembly and canvas carrying case Tripod Includes: Tripod with pan head and quick release platform (make and model of tripod may change without notice) Optional Accessories TS-01 TRIPOD SCREW (required for 12S & 12R models) S014773 S014753 S014751 S015895 27 2009, AFL, all rights reserved. PP-4-00047, Revision 3, 10.15.14

Pole Mount Splicing Workstation Aerial mounting system ASW-02 Splicing Workstation The ASW-02 Splicing Workstation can be used with a fusion splicer and cleaver in aerial or terrestrial splicing applications. The ASW-02 provides a stable work surface and secure mounting of the splicer and cleaver to prevent accidental drops and equipment damage in challenging splicing locations. The ASW-02 Splicing Workstation consists of the work tray, a convenient pivoting cleaver mounting arm, a post for attachment to bucket or ladder mounting accessories, a tripod mount, and dual safety straps. An aerial mounting system is available for direct attachment of the workstation to a telephone pole, or for suspending the workstation from an aerial cable strand. The strand mounting system is fully adjustable to provide for optimal location of the workstation when minimal slack fiber is available, such as in a taut-sheath cable access scenario. In the aerial environment, the safety straps may be secured to the cable strand to provide security and aid with workstation position adjustment. The safety straps are also used to secure the workstation to the pole, and may be used to raise or lower the workstation. Features Provides direct to pole mounting as well as direct adjustable attachment to aerial strand Mounting post provided for attachment to bucket and ladder mounting accessories (utilizing any popular copper splicer-head mounting rigs) Tripod mount allows for placement in tight FTTH splicing applications Includes cable tie locations to secure cables during splicing Optimized to simplify taut sheath splicing applications Cleaver mount securely captures cleaver and allows operator to rotate it in and out of the workspace as needed Matte finish minimizes glare Compatible with all FSM-17, FSM-18, FSM-50, FSM-60 and 19/70 series models Safety Straps Mounting clamp ASW-02 Splicing Workstation (Full kit with aerial mounting system) Includes aerial mounting system to provide strand and pole mounting capability, a post for attachment to bucket or ladder mount accessories and a receptacle for tripod mounting and safety straps ASW-02 Splicing Workstation (Without aerial mounting system) Includes a post for attachment to bucket or ladder mount accessories and a receptacle for tripod mounting SO10532 SO13620 Cleaver mount Tray assembly Aerial Mounting System *Illustration for reference only. 28 2002, AFL, all rights reserved. PP-4-00003, Revision 3, 2.3.14

TJ-03 Temporary Joining Tool The TJ-03 is a temporary mechanical fiber splice for fiber and cable connections to test equipment such as OTDRs or fiber optic cable reels. The TJ-03 uses a precision ceramic V-groove to align up to 12 fibers simultaneously. The fibers are prepared for joining by using standard mass fusion fiber preparation tools (fiber holders, hot jacket stripper, and cleaver.) Using the TJ-03 in conjunction with an OTDR equipped with an optical switch provides rapid one button optical tests of 12 fibers. Features Precision ceramic V-groove alignment Built-in magnifier and lamp to inspect fiber placement in V-grooves TJ-03 Temporary Splice Kit Includes: Fiber Holders (1 pair) FH-50-12, CT-30 Cleaver, HJS-02 Hot Jacket Stripper, ADC-09 AC Adapter for HJS-02, and the ACC-09 Power Cord TJ-03 Temporary Splice (without fiber preparation tools) S012772 S010456 29 2002, AFL, all rights reserved. PP-4-00056, Revision 4, 5.23.13

LZM-100 2 mm to 125 μm Splice LZM -100 The LZM-100 LAZERMaster is a glass processing and splicing system that uses a CO 2 laser heat source to perform splicing, adiabatic tapering (to create MFAs or pump combiners), lensing, or other glass shaping operations with glass diameters of 2.3 mm or more. The high resolution optical analysis system works in conjunction with on-board firmware for fully automatic splicing, tapering and other glass shaping processes. High precision glass processing is enabled by the intuitive and user-friendly on-board firmware (virtually identical to that of the Fujikura FSM-100 ARCMaster splicers). Operations may also be performed manually and by PC control. A SpliceLab PC control GUI is supplied with the LZM-100 to provide additional features, greater flexibility and finer control. The SpliceLab GUI is pre-installed on the All-in-one computer. Customers can also create proprietary PC control algorithms using a complete set of PC control commands. Features CO 2 laser heat source eliminates electrode or filament maintenance, provides extremely stable operation and greatly reduces the need for periodic calibration Automated laser beam diameter control to fine tune the size of the heating area An advanced configurable system capable of producing tapers, ball lenses, combiners, MFAs, glass shaping and splicing Excellent performance for dissimilar diameter fiber splicing Ultra high strength splicing Redundant automated laser safety features 2.3 mm maximum fiber diameter (larger fibers may be spliced manually) Long travel / high resolution Z motion for long adiabatic tapers Automatic operation by on-board LZM-100 splicer firmware, manual operation or operation by PC (PC and SpliceLab GUI included with the LZM-100 system) Intuitive SpliceLab PC GUI: Easy to understand, navigate and operate Complete set of PC command codes enables users to develop proprietary processes Advanced Adiabatic Tapering Ball Lens 320 μm with 125 Splice to 80 μm Fiber LAZERMaster LZM-100 Glass Processing & Splicing System (Standard baseline LZM-100 system. Includes AC adapters & cords and SpliceLab PC software) LAZERMaster LZM-100 (with dual theta motors) All-in-one Computer (includes keyboard and mouse, monitor stand for mounting all-in-one computer. SpliceLab software pre-installed.) (required) End-View Observation & Alignment Option Side Table Work Surface Option (Work surface to provide additional area for accessories such as fiber preparation equipment. May be attached to the left or right side of the LZM-100 or both. Folds down against the side of the LZM-100 chassis when not needed or to allow easy movement through narrow doorways.) Cylindrical Lens & Lens Holder (optional) LZM-100 Training (USA) LZM-100 Training (International) ITEM NO. S015871 S015872 S015242 S015244 S015247 S015251 S015867 S015868 30 2012, AFL, all rights reserved. PP-4-00061, Revision 3, 7.24.14

Fiber Heating and Splicing Method Laser Safety Features Laser Beam Control Typical Splice Loss Typical Splice Strength Camera Field of View Fiber Observation Methods Applicable Fiber Diameter V-Groove Clamping System Fiber Handling Alignment Methods X/Y Alignment Resolution Maximum Z Travel Length Z Travel Resolution Maximum Taper Length Maximum Taper Ratio Maximum Taper Speed Splicing Control Fiber Tapering & Glass Shaping Control PC Control PC Option Interface Ports Electrical Power Operating Conditions Rotation Motors PM Fiber Alignment Methods End-View Observation & Alignment CO 2 Laser Metal cover with interlock, class 1 enclosure Automatic actuation of safety shutter Automatic laser power cutoff Triple redundancy Proprietary feedback system assures laser beam power stability Laser beam size and shape may be customized to meet specific user requirements 0.02 db for SMF (ITU-T G.652) >400 kpsi for SMF (ITU-T G.652) using appropriate fiber preparation equipment 2.7 mm PAS (Profile Alignment System) via transverse fiber observation. WSI (Warm Splice Image) and WTI (Warm Taper Image) End-view observation (Optional) 80 μm to 2300 μm for automatic alignment by PAS Larger diameter fibers may be aligned manually or by power meter feedback Infinitely variable from 80 μm up to 2300 μm Clamping bare fiber or fiber coating Patented split V-groove system Fujikura FSM-100, FSM-45 and FSM-40 splicer fiber holders Custom fixtures to meet specific customer requirements PAS (Profile Alignment System, automatic alignment by camera observation) Manual Other methods by PC control Power meter feedback via GPIB (Optional) End-view (Optional) 0.1 μm 150 mm (both left and right Z units) 0.125 μm theoretical 130 mm 10:1 standard (For uniform direction, one-pass tapering) Dual direction tapering offers greatly increased taper ratios, as does tapering with more than one tapering pass. 1 mm/sec standard (Optional 5 mm/sec) Internal firmware or operation by PC Internal firmware or operation by PC SpliceLab software will be provided Complete command set for PC control An all-in-one computer is required. Use of the SpliceLab software on a PC provides finer control and additional features compared to the LZM-100 internal firmware. Using another software application, the PC interface also allows for advanced maintenance functions such as the ability to confirm laser beam alignment, and align if required. USB 2.0 (For PC communications, data and image download, etc.) GPIB (Optional, for power meter feedback) 100-240 VAC 15-40oC Optional: Provides theta rotational motion for PM alignment for both left and right sides PAS (For PANDA and other PM fibers) IPA (Interrelation Profile Alignment, applicable to almost all PM fibers. Three distinct IPA methods available.) End-view (Optional) Power meter feedback (Requires polarizer and analyzer, as well as optional GPIB interface) Manual Other methods by PC control Optional internal end-view system Preliminary, subject to revision and refinement 31 2012, AFL, all rights reserved. PP-4-00061, Revision 3, 7.24.14

FSM-100M FSM-100P Features Split V-groove clamping system Plasma Zone fiber positioning PAS and WSI New IPA alignment method for PM fibers Enhanced sweep arc technology Zero degree fiber handling for LDF Special functions for glass processing capability Fiber profile memory function New arc calibration technology Short cleave length capability Fast and accurate PANDA splice mode Ergonomic, production friendly design User selectable display on dual LCD monitors Internet firmware updates FSM-100M and FSM-100P Fusion Splicers Whether splicing similar fiber types or double clad LDF fibers for high power lasers, the ARCMaster series splicers provide multiple solutions for diverse production needs. With State of the ARC technology, the ARCMaster sets the standard for fusion splicing with a multitude of new features designed to make splicing easier. The patent-pending split V-groove fiber clamping system accommodates optical fiber ranges from 60 to 2000 μm for cladding or coating without changing V-grooves or fiber clamps. The Plasma Zone fiber positioning system incorporates multiple fiber and electrode positioning techniques to provide unprecedented versatility for splicing LDF, heat sensitive or small diameter fibers. With a new fiber imaging technology, Interrelation Profile Alignment (IPA), alignment and splicing capabilities are possible with virtually any PM fiber type. Longer fiber tapering application is possible with Fujikura s Sweep Arc technology. Incorporating PAS (cold fiber image) and WSI (warm image) technologies, the optical analysis system provides a number of advanced features including improved loss estimation capabilities, fiber image performance with both LDF, small or heat sensitive fibers. Users can program multi-step glass processing operations to include non-splicing operations such as generating tapers or lenses. Dual LCD monitors provide enhanced data and graphical information that is user-selectable during each stage of the splicing process. Both units are designed with the needs for production in mind and are suitable for the most popular production workstations. ARCMaster FSM-100M Fusion Splicer (machine only) Includes: FH-100-250 fiber holders (pair), FH-100-900 fiber holders (pair), spare electrodes (pair), ADC-15 AC adapter, ACC-02 AC power cord, USB cable, dust cleaning swab set, operation manual and software on CD, and transit case ARCMaster FSM-100M Fusion Splicer Kit * ARCMaster FSM-100P Fusion Splicer (machine only) Includes: FH-100-250 fiber holders (pair), FH-100-400 fiber holders (pair), FH-100-900 fiber holders (pair), spare electrodes (pair), ADC-15 AC adapter, ACC-02 AC power cord, USB cable, dust cleaning swab set, operation manual and software on CD, and transit case ARCMaster FSM-100P Fusion Splicer Kit * One year extended warranty (extends factory warranty by one year) Two year extended warranty (extends factory warranty by two years) S014821 S014822 S014823 S014824 S012996 S013000 * Each splicer kit includes an HJS-02 Hot Jacket Stripper, a CT-32 Cleaver and a SPA-HJS-030 Spacer for HJS-02 in addition to the items listed above. 32 2011, AFL, all rights reserved. PP-4-00017, Revision 3, 2.3.14

FSM-100M and FSM-100P Fusion Splicers Accessories for the FSM-100M and FSM-100P PARAMETER Applicable Fiber VALUE Silica based Single-mode and Multimode glass fiber: SMF (G.652), MMF (G.651), NZDSF (G.655), EDF, DCF, LDF and PMF, etc. Fiber Dimension Cladding diameter: 60 to 500 µm Coating diameter: 100 to 2,000 µm Cleave Length Glass clamping: 8 to 10 mm (standard 9mm) Coating clamping: 3 to 5 mm (standard 4mm) Typical Splice Loss SMF: 0.03 db MMF: 0.02 db NZDSF/LDF: 0.05 db PMF: 0.06 db (FSM-100P) Splicing Time SMF/MMF: 15 sec. NZDSF/LDF: 25 sec. PMF (PANDA): 35 to 50 sec. (FSM-100P) PMF (IPA): 90 to 300 sec. (FSM-100P) Polarization Cross-Talk PMF (PANDA): -40 db / 0.6 degree (FSM-100P) PMF (IPA): -32 db / 1.4 degree (FSM-100P) Return Loss 60 db or more Heating Time FP-03 (40 mm): 30 sec. FP-03 (60 mm): 35 sec. Micro sleeves: 55 sec. Sweep Length ±5 mm Electrode Life 2,500 Arc Discharges (SMF G.652 splicing at 1mm gap) Electrode Gap 1 to 3 mm Electrode Offset -0.3 to +0.1 mm Proof Test 1.96 N to 2.45 N Dimensions (mm) 311W x 232D x 160H Weight (excluding AC adapter) Operation Temperature FSM-100M: 7.7 kg FSM-100P: 7.9 kg 0 C to 40 C at 0 to 95% RH (Non-Dew) Storage Temperature -40 C to 80 C Monitor Type Dual 4.1 inch TFT color LCD monitors Magnification 125 µm: 187 to 300 X 250 µm: 58 to 300 X 400 µm: 58 to 93 X High Strength Accessories High Strength Preparation Kit Includes: USC-02, AFL PowerStrip and AFL PowerCleave Ultrasonic Cleaner (USC-02) HTS-12 High Tensile Stripper - includes 250 µm blades (400 µm available) AFL PowerStrip High Tensile Stripper AFL PowerCleave High Strength Cleaver Strippers HJS-02 Hot Jacket Stripper SPA-HJS-030 Spacer HJS-02-80 Hot Jacket Stripper (80 µm cladding) JS-02-900 (900 µm) Electrodes ELCT2-25 Spare Electrodes (pair) Cleavers CT-32 Cleaver CT-38 Cleaver ( for 80 µm cladding) Fiber Holders (Pairs) FH-100-060 Fiber Holder (55 µm - 71 µm) FH-100-100 Fiber Holder (94 µm - 117 µm) FH-100-125 Fiber Holder (118 µm - 139 µm) FH-100-150 Fiber Holder (140 µm - 169 µm) FH-100-180 Fiber Holder (170 µm -199 µm) FH-100-210 Fiber Holder (200 µm -239 µm) FH-100-250 Fiber Holder (240 µm -289 µm) FH-100-300 Fiber Holder (290 µm -339 µm) FH-100-350 Fiber Holder (340 µm -389 µm) FH-100-400 Fiber Holder (390 µm -489 µm) FH-100-500 Fiber Holder (490 µm -589 µm) FH-100-600 Fiber Holder (590 µm -689 µm) FH-100-700 Fiber Holder (690 µm -789 µm) FH-100-800 Fiber Holder (790 µm -889 µm) FH-100-900 Fiber Holder (890 µm -989 µm) FH-40-LT900 Fiber Holder Power and Cords ADC-15 AC Adapter (FSM-100M/P) ACC-02 AC Power Cord ADC-09 AC Adapter for HJS-02 ACC-09 AC Power Cord (for ADC-09) Miscellaneous CC-27 Transit Case (100 M/P) DCS-01 Dust Cleaning Swab HP Power Meter Coupling Adapter ILX Power Meter Coupling Adapter Fiber Holder Adapter for HP/ILX PM S013632 S014783 S012094 S012808 S009972 S010340 S012086 S013264 S010908 S002068 S014348 S014349 S014977 S014828 S014829 S014861 S014830 S014831 S014832 S014833 S014834 S014835 S014836 S014837 S014838 S014839 S014840 S013584 S014826 S001171 S014389 S014390 S014825 S014827 S012180 S012184 S012188 33 2011, AFL, all rights reserved. PP-4-00017, Revision 3, 2.3.14

FSM-100P+ FSM-100M+/FSM-100P+ Fusion Splicers The FSM-100M+ and FSM-100P+ specialty fusion splicers provide advanced capabilities suitable for fiber lasers, sensors, research and development and the medical field. New capabilities include an innovative end-view fiber observation system, XLDF (Extra Large Diameter Fiber) splicing capability using Plasma Zone Path Modulation, enhanced sweep arc technology and other features for glass processing and fiber tapering, and patented split V-groove clamping system. With State of the ARC technology, the ARCMaster series of fusion splicers sets a new standard for fusion splicing, providing the ultimate in performance and flexibility. FSM-100M+ Features: FSM-100M+/FSM-100P+ End-view observation system for alignment of non-circular, holey and other exotic fibers XLDF (Extra Large Diameter Fiber) splicing capability up to 1200 µm diameter fiber Patented split V-groove clamping system covers a range from 60 to 2000 µm Advanced Plasma-Zone control methods to optimize heating for specific fiber types Motorized electrodes to change electrode gap to optimize Plasma Zone shape Adjustable vertical height to position fiber within Plasma Zone Electrode oscillation produces Plasma Zone Path Modulation for XLDF splicing Enhanced ability for fiber shaping, glass processing, tapering, etc. Custom multi-step Special Functions programmability Long-travel sweep arc technology (fiber sweep motion up to +/- 18 mm) Long-travel left/right Z-drive mechanisms Three selectable arc calibration methods Conventional calibration method for standard fibers New melt-back method with new parameters for special fibers including XLDF Real-time calibration by arc brightness observation (with fiber brightness learning function) Dual 4.1 inch monitors with user-selectable information display Extensive PC connectivity functions (software upload, data upload/download, PC control) Features: FSM-100P+ Three alignment methods for PM fibers Fast PANDA mode alignment by PAS system New IPA mode for aligning all kinds of PM fibers (with learning function for expandable PM fiber auto-recognition database) End-view PM fiber alignment including ability to align PM fiber core Theta rotation for non-pm LMA fibers Provides best alignment of both LMA core and pump guide (inner clad) ARCMaster FSM-100M+ Fusion Splicer (machine only) S014813 Includes: FH-100-250 fiber holders (pair), FH-100-250-EV fiber holders (pair), FH-100-900, ELCT3-25-LDF Included electrode for LDF, ELCT3-25 STD Electrode (Installed), ADC-15 AC adapter, EV-LS01 End-View Light Source, ACC-02 AC power cord, USB cable, dust cleaning swab set, EC-01 Electrode Cleaner, operation manual and software on CD and transit case ARCMaster FSM-100P+ Fusion Splicer (machine only) S014815 Includes: FH-100-250 fiber holders (pair), FH-100-400 fiber holders (pair), FH-100-250-EV fiber holders (pair), FH-100-400-EV fiber holders (pair), FH-100-900, ELCT3-25-LDF Included electrode for LDF, ELCT3-25 STD Electrode (Installed), EV-LS01 End-View Light Source, ADC-15 AC adapter, ACC-02 AC power cord, USB cable, dust cleaning swab set, EC-01 Electrode Cleaner, operation manual and software on CD and Transit case One year extended warranty (extends factory warranty by one year) S012996 Two year extended warranty (extends factory warranty by two years) S013000 continued on next page > 34 2011, AFL, all rights reserved. PP-4-00018, Revision 4, 10.20.14

FSM-100M+/FSM-100P+ Fusion Splicers Accessories High Strength Accessories High Strength Preparation Kit S013632 Includes: USC-02, AFL PowerStrip and AFL PowerCleave Ultrasonic Cleaner (USC-02) S014783 HTS-12 High Tensile Stripper - includes 250 µm blades (400 µm available) S012094 AFL PowerStrip High Tensile Stripper S012808 AFL PowerCleave High Strength Cleaver S009972 Strippers HJS-02 Hot Jacket Stripper S010340 HJS-02-80 Hot Jacket Stripper (for 80 µm cladding) S013264 JS-02-900 (900 µm) S010908 Electrodes ELCT3-25 STD Electrodes S015184 ELCT3-25-LDF Electrodes S015015 Cleavers CT-32 Cleaver S014348 CT-38 Cleaver (for 80 µm cladding) S014349 Fiber Holders (Pairs) FH-100-60 Fiber Holder (55-71 µm) S014977 FH-100-60-EV Fiber Holder (55-71 µm) S014989 FH-100-100 Fiber Holder (94-117 µm) S014828 FH-100-100-EV Fiber Holder (94-117 µm) S014990 FH-100-125 Fiber Holder (118-139 µm) S014829 FH-100-125-EV Fiber Holder (118-139 µm) S014991 FH-100-150 Fiber Holder (140-169 µm) S014861 FH-100-150-EV Fiber Holder (140-169 µm) S014992 FH-100-180 Fiber Holder (170-199 µm) S014830 FH-100-180-EV Fiber Holder (170-199 µm) S014993 FH-100-210 Fiber Holder (200-239 µm) S014831 FH-100-210-EV Fiber Holder (200-239 µm) S014994 FH-100-250 Fiber Holder (240-289 µm) S014832 FH-100-250-EV Fiber Holder (240-289 µm) S014995 FH-100-300 Fiber Holder (290-339 µm) S014833 FH-100-300-EV Fiber Holder (290-339 µm) S014996 FH-100-350 Fiber Holder (340-389 µm) S014834 FH-100-350-EV Fiber Holder (340-389 µm) S014997 FH-100-400 Fiber Holder (390-489 µm) S014835 FH-100-400-EV Fiber Holder (390-489 µm) S014998 FH-100-500 Fiber Holder (490-589 µm) S014836 FH-100-500-EV Fiber Holder (490-589 µm) S014999 FH-100-600 Fiber Holder (590-689 µm) S014837 FH-100-600-EV Fiber Holder (590-689 µm) S015000 FH-100-700 Fiber Holder (690-789 µm) S014838 FH-100-700-EV Fiber Holder (690-789 µm) S015001 FH-100-800 Fiber Holder (790-889 µm) S014839 FH-100-800-EV Fiber Holder (790-889 µm) S015002 FH-100-900 Fiber Holder (890-989 µm) S014840 FH-100-900-EV Fiber Holder (890-1000 µm) S015003 FH-100-1000 Fiber Holder (990-1089 µm) S014978 FH-100-1000-EV Fiber Holder (990-1089 µm) S015004 FH-100-1100 Fiber Holder (1090-1189 µm) S014979 FH-100-1100-EV Fiber Holder (1090-1189 µm) S015005 FH-100-1200 Fiber Holder (1190-1289 µm) S014980 FH-100-1200-EV Fiber Holder (1190-1289 µm) S015006 FH-100-1300 Fiber Holder (1290-1389 µm) S014981 FH-100-1300-EV Fiber Holder (1290- - 1389 µm) S015007 FH-100-1400 Fiber Holder (1390-1489 µm) S014982 FH-100-1400-EV Fiber Holder (1390-1489 µm) S015008 FH-100-1500 Fiber Holder (1490-1589 µm) S014983 FH-100-1500-EV Fiber Holder (1490-1589 µm) S015009 FH-100-1600 Fiber Holder (1590-1689 µm) S014984 FH-100-1600-EV Fiber Holder (1590-1689 µm) S015010 FH-100-1700 Fiber Holder (1690-1789 µm) S014985 FH-100-1700-EV Fiber Holder (1690-1789 µm) S015011 FH-100-1800 Fiber Holder (1790-1889 µm) S014986 FH-100-1800-EV Fiber Holder (1790-1889 µm) S015012 FH-100-1900 Fiber Holder (1890-1989 µm) S014987 FH-100-1900-EV Fiber Holder (1890-1989 µm) S015013 FH-100-2000 Fiber Holder (1990-2100 µm) S014988 FH-100-2000-EV Fiber Holder (1990-2100 µm) S015014 FH-40-LT900 Fiber Holder S013584 continued > 35 2011, AFL, all rights reserved. PP-4-00018, Revision 4, 10.20.14

FSM-100M+/FSM-100P+ Fusion Splicers Accessories Power and Cords ADC-15 AC Adapter (FSM-100M/P) ACC-02 AC Power Cord ADC-09 AC Adapter for HJS-02 ACC-09 AC Power Cord (for ADC-09) Miscellaneous CC-27 Transit Case (100 M/P) DCS-01 Dust Cleaning Swab EC-01 Electrode Cleaner USB-01 USB Cable HP Power Meter Coupling Adapter ILX Power Meter Coupling Adapter Fiber Holder Adapter for HP/ILX PM S014826 S001171 S014389 S014390 S014825 S014827 S015024 S014777 S012180 S012184 S012188 PARAMETER Applicable Fiber VALUE Silica based Single-mode and Multimode glass fiber: SMF (G.652), MMF (G.651), NZDSF (G.655), EDF, DCF, LDF and PMF, etc. Fiber Dimension Cladding dia.: 60 to 1,200 µm; Coating dia.: 60 to 2,000 µm Cleave Length Typical Splice Loss Splicing Time Polarization Cross-Talk Return Loss Heating Time Sweep Range Electrode Life Electrode Gap Electrode Offset Proof Test Dimensions Weight Operation Temp. Storage Temp. Monitor Type Magnification Glass clamping 8 to 30 mm (standard 9 mm) Coating clamping 3 to 5 mm (standard 4 mm) SMF: 0.03 db; MMF: 0.02 db; NZDSF/LDF: 0.05 db; PMF: 0.06 db SMF/MMF: 15 seconds; NZDSF/LDF: 25 seconds; PMF (PANDA): 35 to 50 seconds (FSM-100P+); PMF (IPA): 70 to 300 seconds (FSM-100P+) PMF (PANDA): -40 db / 0.6 degree (FSM-100P+); PMF (IPA): -40 db / 0.6 degree (FSM-100P+) 60 db or more FP-03 (40 mm): 30 seconds; FP-03 (60 mm): 35 seconds; Micro sleeves: 55 seconds ±18 mm 2,500 Arc Discharges (SMF28 G.652 with 1 mm electrode gap) 1 to 3 mm -0.3 to +0.1 mm 1.96 to 2.45 N 470 mm (W) x 232 mm (D) x 160 mm (H) 8.0 kg (FSM-100M+) / 8.4 kg (FSM-100P+) excluding AC adapter. 0 to 40 C at 0 to 95 % RH (non-dew) -40 to 80 C at 0 to 95 % RH (non-dew) 4.1 inch TFT color LCD monitor x 2 pcs. 125 µm: 187 to 300 X, 250 µm: 3.5 to 300 X, 400 µm: 58 to 93 X, 1000 µm: 3.5 to 7.0 X 36 2011, AFL, all rights reserved. PP-4-00018, Revision 4, 10.20.14

FSR-05 FSR-05, FSR-06 and FSR-07 Optical Fiber Recoaters AFL offers a complete lineup of high quality fiber recoaters to address the small packaging needs of the fiber optic industry. The FSR series recoaters provide automatic operation with an easily exchangeable, low cost, mold design. A quick change resin bottle and pump assembly make messy, cumbersome, and time consuming acrylate changes a thing of the past. The pump system also provides a purge cavity for elimination of bubbles in the acrylate material. A programmable resin injection system provides an exact volume of resin to the mold cavity to ensure consistent and repeatable recoat performance. While the base model FSR-05 provides only recoating functions, the FSR-06 and FSR- 07 also provide programmable rate and force proof-testing capabilities up to 2 kgf or 10 kgf respectively. All of the recoaters are compatible with special recoating resins to provide higher stiffness recoating for 900 μm jacketed fibers, as well as specialty low-index resins for recoating of double-clad fibers. A USB - PC interface allows the user to control and store key parameters associated with the recoating process. The quartz mold technology provides very consistent recoating quality and have an estimated lifetime of 10,000 recoats per mold set. FSR-06 FSR-07 Features Easy mold, resin and pump exchange Quartz molds for high-quality, consistent recoating Wide selection of available mold sizes Automated operation Bubble elimination system Programmable resin injection Selectable proof tester PC interface with USB PARAMETER FSR-05 FSR-06 FSR-07 Applicable fiber coating Colored and non-colored Recoating diameter 195 μm, 255 μm, 280 μm, 450 μm, 670 μm, 1000 μm Custom sizes are available Recoating length 4 to 50 mm Recoating time Injection 20 sec/curing 4 sec (Jacket diameter 250 μm with 280 μm MOLD) Resin injection Volume and speed are programmable Recoat material UV curable Acrylate Recommended specification for other viscosity 2000-6000 cps Curing wavelength 365± 15 nm DSM Desotech DesoLite(R) 950-200 recommended Material of mold Quartz Recoat modes 100 modes All variables programmable Proof-test modes 30 modes Speed, force, time programmable Load application Linear Clamp Mandrel Tension 0.5 kgf ~ 2.0 kgf 0.5 kgf ~ 10.0 kgf Dimensions 252 mm (W) x 135 mm (D) x 169 mm (H) 252 mm (W) x 175 mm (D) x 169 mm (H) Weight 2.9 kg 4.3 kg 4.5 kg Power source AC 100 to 240 C /50 to 60 Hz (External AC adaptor ADC-19) LCD monitor 4.7 inch, Tilt angle PC interface USB 2.0 Type B mini Operating condition 10 to 30 C, 0 to 90% (non dew) Storage condition -40 to 60 C (non dew, no resin) 37 2015, AFL, all rights reserved. PP-4-00081, Revision 3, 1.7.16

FSR-05, FSR-06 and FSR-07 Optical Fiber Recoaters FSR-05 with 280 μm mold Includes: 280 μm mold, ADC-19 AC adapter, ACC-09 AC power cord, USB-01 USB Cable and M-FSR05 instruction manual. FSR-05 with 450 μm mold Includes: 450 μm mold, ADC-19 AC adapter, ACC-09 AC power cord, USB-01 USB Cable and M-FSR05 instruction manual. FSR-06 with 280 μm mold Includes: 280 μm mold, 2 kgf Proof Tester, ADC-19 AC adapter, ACC-09 AC power cord, USB-01 USB Cable, PC-02 Fiber protect cover and M-FSR05 instruction manual. FSR-06 with 450 μm mold Includes: 450 μm mold, 2 kgf Proof Tester, ADC-19 AC adapter, ACC-09 AC power cord, USB-01 USB Cable, PC-02 Fiber protect cover and M-FSR05 instruction manual. FSR-07 with 280 μm mold Includes: 280 μm mold, 10 kgf Proof Tester, ADC-19 AC adapter, ACC-09 AC power cord, USB-01 USB Cable, PC-03 Fiber protect cover and M-FSR05 instruction manual. S016103 S016276 S016104 S016186 S016105 Accessories Fiber protect cover for FSR-06: PC-02 Fiber protect cover for FSR-07: PC-03 Tube set: FSR-05-TUBE-01 Pump head: FSR-05-PUMP-01 UV resin bottle: FSR-05-BTL-01 Force gauge adaptor: FGA-02 MOLDS FSR-05-MOLD-195 FSR-05-MOLD-255 FSR-05-MOLD-280 FSR-05-MOLD-450 FSR-05-MOLD-670 FSR-05-MOLD-1000 S016107 S016108 S016109 S016110 S016112 S016113 S016133 S016134 S016106 S016135 S016136 S016137 Easy mold, resin, and pump exchange Factory installation is not required Bubble Separator Mold exchange Bubble Separator Performance Resin and pump exchange Spare Pump for quickly changing UV resin type: FSR-05-pump-01 38 2015, AFL, all rights reserved. PP-4-00081, Revision 3, 1.7.16

Splice Protection Sleeves AFL offers a wide selection of fiber protection sleeves to meet any application. The FP series is the industry standard for durable and lasting protection of single fiber splices in field installations, while the FP-04(T) and FP-05 provide the same durable protection for 8 and 12 fiber ribbon respectively. The FPS01 and FPS04 series are specially designed for optical components, where small packaging is a priority. These micro sleeves provide the known reliability of Fujikura sleeves in the smallest possible lengths. This easy and cost effective method is a great alternative to recoating. The FPS01 and FPS04 series offer a wide range of options to accommodate various coating sizes, and are manufactured in a variety of lengths. This gives great flexibility in designing optical modules. Standard Sleeves: Dimensions & Applicable Fiber SLEEVES FOR SINGLE FIBERS UP TO 900 MICRONS SLEEVE LENGTH FIBER CLEAVE LENGTH SLEEVE DIAMETER AFTER SHRINK PACKAGING FP-60 60 mm 16 mm 3.1 mm (max.) 1000 Box/100 Pack S015915 FP-40 40 mm 10 mm 3.1 mm (max.) 1000 Box/100 Pack S015916 FP-03(34) 34 mm 10 mm 3.1 mm (max.) 500 Box/10 Pack S000453 SLEEVES FOR TFOCA CABLE (DUAL 900 μm) FIBER COUNT SLEEVE LENGTH FIBER CLEAVE LENGTH SLEEVE DIAMETER AFTER SHRINK PACKAGING FP-D900 2 40 mm 10 mm 3.6 mm (max.) 1000 Box & 50 Pack S014413 SLEEVES FOR RIBBON FIBERS FIBER COUNT SLEEVE LENGTH FIBER CLEAVE LENGTH SLEEVE DIAMETER AFTER SHRINK PACKAGING FP-04(T) Up to 8 fibers 40 mm 10 mm 4.1 mm (max.) 250 Box/25 Pack S002105 FP-05 Up to 12 fibers 40 mm 10 mm 4.5 mm (max.) 250 Box/5 Pack S003027 FP-05-28 Up to 12 fibers 28 mm 10 mm 4.5 mm (max.) 250 Box/25 Pack S014720 FPS04-30 Up to 4 fibers 30 mm 10 mm 2.4 mm (max.) 1,000 Box/25 Pack S010848 FPS08-28 Up to 8 fibers 28 mm 10 mm 3.4 mm (max.) 500 Box/25 Pack S013560 FPS24-40 Up to 24 fibers 40 mm 10 mm 8 mm (max.) 200 Box/5 Pack S013004 PARAMETER VALUE Outer tube FP-60/40/03 series FP-04(T) / FP-05 Polyethylene Inner tube Ethylene-Vinyl Acetate (Polyolefin Copolymer) Strength member Operation condition (after shrink) Storage condition (before shrink) FP-60/40/03 series FP-04(T) / FP-05 Stainless steel Quartz glass -40 to 75 C, 0 to 95% RH (Non dew) -40 to 60 C, Non dew FP-03 series FPS01 series FP-40 series FP-60 series FP-04(T)/05 FPS04-30 FPS08-28 39 2002, AFL, all rights reserved. PP-4-00051, Revision 5, 8.1.14

Splice Protection Sleeves Micro Sleeves: Dimensions & Applicable Fiber FPS01-400 SERIES FOR SINGLE FIBERS UP TO 400 MICRON FIBER SLEEVE LENGTH FIBER CLEAVE LENGTH SLEEVE DIAMETER AFTER SHRINK PACKAGING FPS01-400-12 12 mm 4 mm 1.5 mm 50 Pack S014088 FPS01-400-15 15 mm 4 mm 1.5 mm 50 Pack S012668 FPS01-400-20 20 mm 8 mm 1.5 mm 50 Pack S012672 FPS01-400-25 25 mm 10 mm 1.5 mm 50 Pack S012676 FPS01-400-34 34 mm 15 mm 1.5 mm 50 Pack S012680 FPS01-400-40 40 mm 16 mm 1.5 mm 1,250 Box S011914 FPS01-900 SERIES FOR SINGLE FIBERS UP TO 900 MICRON FIBER SLEEVE LENGTH FIBER CLEAVE LENGTH SLEEVE DIAMETER AFTER SHRINK PACKAGING FPS01-900-15 15 mm 4 mm 2.3 mm 50 Pack S012684 FPS01-900-20 20 mm 6 mm 2.3 mm 50 Pack S012688 FPS01-900-25 25 mm 6 mm 2.3 mm 50 Pack S011954 FPS01-900-34 34 mm 13 mm 2.3 mm 50 Pack S012692 FPS01-900-45 45 mm 16 mm 2.3 mm 50 Pack S012696 PARAMETER MODEL VALUE Outer tube FPS01 series / FPS04-30 Polyethylene Inner tube Strength member Operation condition (after shrink) Storage condition (before shrink) FPS01 series FPS04-30 / FPS08-28 Ethylene-Vinyl Acetate (Polyolefin Copolymer) Stainless steel Quartz glass -40 to 75 C, 0 to 95% RH (Non dew) -40 to 60 C, Non dew Type Variations FULL SCALE 40 2002, AFL, all rights reserved. PP-4-00051, Revision 5, 8.1.14

CT-32 Precision Fiber Cleaver The CT-32 is a modified version of our standard cleaver model CT-30. The modifications allow use of a spacer system that provides for the full range of acceptable cleave lengths for use with our factory fusion splicer models FSM-45F and 45PM. The CT-32 also allows for a reduced cleave length of 8 mm on 900 µm jacketed fibers and as short as 3 mm on 250 µm and 400 µm coated fibers. Included with the CT-32 is a 1 mm spacer that allows for the recommended cleave lengths for use with our factory fusion splicer models. An optional 2 mm spacer can be purchased to expand cleave length options. *Delivered as shown PARAMETER VALUE Dimensions (W x D x H) 69 mm x 82 mm x 41 mm (2.7" x 3.2" x 1.6") Weight 180 g (0.4 lbs) Blade lifetime 48,000 cleaves (1,000 x 3 heights x 16 positions ) Cleave angle capability typically <0.5 Fiber count Single Fiber type Silica Optical Fiber Cladding diameter 125 µm Coating diameter 0.25 mm to 0.9 mm depending on fiber holder (FH-40 series) APPLICATION CT-32 Includes: CT-32 cleaver, SPA-40-CT-040 cleaver spacer, FC-02 fiber collector, FDB-02 scrap box (small), FDB-03 scrap box (large), SC-01 side cover, hex wrench, carrying case and instruction manual Single Fibers: 250 µm to 900 µm coating, 125 µm cladding S014348 Accessories Shown in CC-21 Carrying Case SPA-40-CT-050 Spacer (2 mm) Replacement Blade for CT-30 Series Cleavers FC-02 Fiber Collector FDB-02 Fiber Collector Scrap Box CC-21 Carrying Case for CT-30 Series Cleaver S014351 S012828 S014092 S014104 S014484 Application CLEAVE LENGTH REQUIRED CLEAVER SPACER (mm) PROVIDED OPTIONAL NOTE 10 SPA-40-CT-050 9 SPA-40-CT-040 8 5 SPA-40-CT-050 Short cleave length of 3 mm to 4 SPA-40-CT-040 5 mm available by stripping with 3 HJS-02 and SPA-040-HJS-030. (sold separately) 41 2006, AFL, all rights reserved. PP-4-00012, Revision 2, 8.30.12

CT-38 Precision Fiber Cleaver The CT-38 cleaver is designed for cleaving silica fibers with 80µm cladding. Utilizing the same one step design of our popular CT-30 cleaver, the CT-38 is quick, easy, and dependable. The 16 position blade yields 48,000 cleaves by providing for blade height and position adjustments. The cleaver can be used with either the FSM-45F and 45PM fiber holder system or with the optional AD-30A adapter plate for other applications. Application CT-38 FIBER PLACING Fiber Holder CLEAVE REQUIRED CLEAVER SPACER LENGTH NOTE PROVIDED OPTIONAL (MM) 10 SPA-40-CT-050 9 SPA-40-CT-040 8 5 SPA-40-CT-050 Short cleave length of 3 mm to 4 SPA-40-CT-040 5 mm available by stripping with 3 HJS-02 and SPA-040-HJS-030. (sold separately) CT-38A Fiber Plate 6 to 20 SPA-40-CT-050 Requires purchase of CT-38 and optional AD-30A. PARAMETER VALUE Dimensions (W x D x H) 69 mm x 82 mm x 41 mm (2.7" x 3.2" x 1.6") Weight 180 g (0.4 lbs) Blade lifetime 48,000 cleaves (1,000 x 3 heights x 16 positions ) Cleave angle capability typically <0.5 Fiber count Single Fiber type Silica Optical Fiber Cladding diameter 80 µm APPLICATION CT-38 (fiber holder) Includes: CT-38 cleaver, SPA-40-CT-040 cleaver spacer, hex wrench, carrying case and instruction manual Single Fibers: 165 µm coating, 80 µm cladding S014349 Accessories Replacement Blade for CT-30 Series Cleavers CC-21 Carrying Case for CT-30 Series Cleaver AD-30A Adapter Plate SPA-40-CT-050 Spacer S012828 S014484 S014096 S014351 42 2006, AFL, all rights reserved. PP-4-00013, Revision 3, 8.30.12

CT-100 Fiber Cleaver Precise cleaving is required for photonic splicing applications as the types of optical fiber become more diversified to meet new applications. In addition, angled cleaving is often required for low back-reflection fiber end preparation. The CT-100 has been developed to offer adjustability and versatility for these various fiber types and applications while offering superior cleaving performance beyond conventional cleavers that utilize a circular blade. The CT-100 is equipped with a motorized diamond blade that touches the fiber after tension has been applied providing high-strength cleaving capability. Features Diamond blade with long blade life Large diameter fiber cleaving capability (fiber diameter range 80 to 250 µm) Angle cleaving capability (0 to 15 degrees) Cleave counter Adjustable cleave length Dual power sources (4 AA batteries or AC adapter) PARAMETER Applicable Fiber Cleaving Performance VALUE Conventional silica optical fiber Typical 0.5 degrees Cladding Diameter 80 to 250 µm Coating Diameter 160 to 2000 µm Cleave Angle Capability Cleave Length Dimensions Weight Blade Lifetime DC Power Supply AC Power Supply Operating Conditions Storage Conditions 0 to 15 degrees (adjustable) 0 to 40 with Fiber Holder, FH-100 series or FH-40 series 140 mm (W) x 110 mm (D) x 95 mm (H) 900 g or less (excluding batteries) 20,000 fibers (1,000 fibers x 20 positions) 4 AA size batteries (approx. 2000 cleaves) 100 to 240 VAC / 50 to 60 Hz using ADC-16 Temperature: 0 to 40 C, Humidity: 0 to 95% RH (Non-condensing) Temperature: -40 to 80 C, Humidity: 0 to 95% RH (Non-condensing) CT-100 Advance Optical Fiber Cleaver Includes: ADC-16 AC adapter, ACC-09 AC power cord, 1.5 mm hex wrench, 2.5 mm hex wrench and instruction manual S014972 Accessories ADC-16 AC Adapter ACC-09 AC Power Cord CB-03 Cleaver Blade S015017 S014390 S015214 43 2011, AFL, all rights reserved. PP-4-00008, Revision 3, 5.24.13

CT-105 and CT-106 Fiber Cleavers When exceptional cleave quality is required for fibers up to 1,250 μm, the new large diameter CT-105/CT-106 cleaver family provides both flat and angled cleaves using an automatic clamping system with programmable force. The color LCD shows cleaving progress and recommended insert size depending on fiber coating and cladding diameter. Saving and storing cleaving programs to a PC or tablet is accomplished using a USB port. The LDF cleaver s extensive programming features allow for optimal results. CT-105 CT-106 Features Applicable up to 1,250 μm diameter fibers Automatic clamping system Up to 100 program modes can be stored Angled cleaving function on CT-106 20,000 cleave per blade for 125 μm fiber Fiber backstop standard on all cleavers PARAMETER CT-105 CT-106 Applicable optical fiber Glass optical fibers, capillary Number of fibers Single Cladding diameter 80-1,250 μm Coating diameter 160-3,000 μm Fiber clamping Automatic clamping Cleaving length 5-40 mm Angled cleaving - 0-15 (up to 800 μm cladding fiber) Blade life 20,000 fibers (Cladding diameter 125 μm) Number of cleaving mode Maximum 100 Language English/Japanese Monitor 4.7 inches color LCD Dimensions 240(W) 134(D) 155(H) mm 240(W) 134(D) 162.5(H) mm Weight 3.5 kg 3.8 kg Power supply AC adapter : ADC-19 Input : AC100 to 240 V (50 to 60 Hz) (max. 20 W) Operation condition 0 to 95% RH and 0 to 40 C (non-dew) Storage condition 0 to 95% RH and -40 to 80 C (non-dew) Terminal USB2.0 (Mini-B type) for PC communication CT-105 Large Diameter Optical Fiber Cleaver Includes: ADC-19 AC adapter, ACC-09 AC power cord, HEX-01 hex wrench, USB-01 USB Cable and M-CT105 instruction manual CT-106 Angled Large Diameter Optical Fiber Cleaver Includes: ADC-19 AC adapter, ACC-09 AC power cord, HEX-01 hex wrench, USB-01 USB Cable and M-CT105 instruction manual S016076 S016077 blade clamp backstop fiber backstop Angled Cleaving Angled cleaving from 0-15 is possible for fibers up to 800 µm (only for CT-106) Automatic Clamp Function Clamping optical fiber with programmable force automatically. No compressed air or torquewrenches required. Backstop A back stop is important for cleaving both very small and large diameter fibers and is standard on all CT-105/CT-106 cleavers. 44 2014, AFL, all rights reserved. PP-4-00080, Revision 1, 11.3.15

CT-105 & CT-106 Fiber Cleavers Accessories CB-06 Replacement Blade AC adapter ADC-19 AC power cord ACC-09 Fiber Holder Inserts Master fiber holder insert kit (includes all available inserts listed below) INSERT-L-80 INSERT-L-125 INSERT-L-160 INSERT-L-250 INSERT-L-400 INSERT-L-500-750 S016078 S015523 S014390 S016098 S016085 S016086 S016087 S016088 S016089 S016090 Fiber Holder Inserts (continued) INSERT-L-1000-1250 INSERT-L-1500-1750 INSERT-L-2000-2250 INSERT-L-2500-3000 INSERT-U-80-400 INSERT-U-500-750 INSERT-U-1000-1250 INSERT-U-1500-1750 INSERT-U-2000-2250 INSERT-U-2500-3000 S016091 S016092 S016093 S016094 S016079 S016080 S016081 S016082 S016083 S016084 Height adjusting spacer (10 piece pack) SPA-CT105-30 (30 μm) S016095 SPA-CT105-50 (50 μm) S016096 SPA-CT105-100 (100 μm) S016097 Insert Selection Guide INSERT-U-80-400 INSERT-U-500-750 INSERT-U-1000-1250 INSERT-U-1500-1750 INSERT-U-2000-2250 INSERT-U-2500-3000 F R F R F R F R F R INSERT-L-80 60-100 INSERT-L-125 90-160 INSERT-L-160 115-200 INSERT-L-250 180-300 INSERT-L-400 280-500 INSERT-L-500-750 F 475-700 R 675-950 INSERT-L-1000-1250 F 925-1150 R 1125-1400 INSERT-L-1500-1750 F 1375-1700 R 1675-1900 INSERT-L-2000-2250 F 1875-2200 R 2175-2450 INSERT-L-2500-3000 F 2425-2750 R 2725-3175 Upper and lower inserts can be changed up or down depending on required fiber fit into the V-groove. Inserts 500 μm and above are double-sided. Therefore, the visible label when inserted indicates the size of the insert you are using. Upper and lower inserts are necessary for both left and right side clamps. Case 1: Cleaving fiber with a coating Case 2: Cleaving glass rod L: INSERT-U-xxx-xxx R: INSERT-U-xxx-xxx L: INSERT-U-xxx-xxx R: INSERT-U-xxx-xxx L: INSERT-L-xxx-xxx R: INSERT-L-xxx-xxx According to coating diameter According to cladding diameter Inserts according to both coating diameter and cladding diameter are necessary. L: INSERT-L-xxx-xxx R: INSERT-L-xxx-xxx According to coating diameter According to cladding diameter Two insert pairs of the same size according to rod diameter are necessary. 45 2014, AFL, all rights reserved. PP-4-00080, Revision 1, 11.3.15

photo PowerCleave To complement the line of world class splicing systems, AFL s PowerCleave combines the precision of an ultrasonic cleaver with the ease and improved fiber management of the Fujikura fiber holder system. The PowerCleave utilizes the tensile stress method to avoid touching or damaging the bare glass surface during cleaving, ensuring highly robust, reliable and durable splice results. The PowerCleave provides consistent flat ends even at cleave lengths as short as 3 mm. Specially designed for use with Fujikura s specialty market splicers, this advanced cleaving system allows for more reliability and greater splicing consistency with less dependence on operator technique. Features Tensile cleaving with ultrasonic blade Consistent, low-angle cleaves of short cleave-length fibers Fiber holder system reduces fiber handling Clean, reliable quality PARAMETER Fibers Cleaved Minimum Cleave Length Cleave Angle Blade Clamping System Case Battery Dimensions (L x W x D) Weight Operating Temperature Storage Temperature CE Conformity VALUE 80 µm - 200 µm (cladding diameter) 3 mm <0.6 typical (95% of cleaves) Diamond with an estimated life of over 20,000 cleaves Compatible with Fujikura specialty market fiber holder systems ABS impact resistant with non-slip feet and a 6.25 mm (.24 inch) BSW thread tripod mount for hard mounting to a workstation 9V alkaline (MN 1604), battery life approximately 10,000 cleaves 75 mm x 153 mm x 150 mm (3.0 x 6.0 x 5.9 inches) 1.1 kg (2.4 lbs) 0 C to 45 C (32 F to 113 F) -20 C to 60 C (-4 F to 140 F) Fully complies with all EC equipment guidelines according to the CE declaration of conformity PowerCleave Kit Includes: PowerCleave, Instruction manual, 2.5 mm x 60 mm screwdriver, 2 mm Allen wrench S009972 46 2002, AFL, all rights reserved. PP-4-00063, Revision 3, 5.29.12

AFL PowerStrip AFL PowerStrip is a thermal stripper used in high strength splicing. Using the proven blade and centering design of the Schleuniger FiberStrip 7030 in addition to the fiber holder system, the AFL PowerStrip automatically centers the fiber, heats the buffer or coating and strips the buffer at a controlled rate with perfect alignment. The fiber holder system reduces fiber handling, making this tool ideal for any production environment. Features 250 µm and 900 µm fiber capability Short cycle time Lightweight and portable PARAMETER Fibers Stripped - Single Buffered Fiber Clamping System Stripping Length Heater Temperature Range Heating Time Cycle Time Power Supply Dimensions (L x W x D) Weight CE Conformity VALUE Cladding diameter: 125 µm standard, 80 µm optional Coating diameter: 250 µm and 900 µm standard, 160 µm and 400 µm optional Fujikura fiber holder clamp; compatible with FSM-45F/PM and 100 series fiber holders Up to 35 mm 110 C to 150 C (230 F to 302 F) 1.5 to 13 seconds Approximately 5 seconds/cycle (after heating) Input: 100 to 240 V AC, 50/60 ± 3 Hz; Output: 12 V DC, 12 W, 1 A 209 mm x 57 mm x 45 mm (8.25 x 2.25 x 1.8 inches) 0.7 kg (1.5 lbs) Complies with all CE equipment guidelines AFL PowerStrip Kit Carrying case, fiber holder clamping system, blades and centralizers for 125/250 µm and 125/900 µm fiber, power supply 230 V AC or 100/120 V AC, power cord 2 m (6.5 feet), cleaning brush and tool set (hex keys, adjustment screwdriver) Coating Blades S012808 80/125 µm S014859 80/160 µm S012656 125/250 µm S012596 125/400 µm S012628 125/500 µm S014865 125/900 µm S012604 204/360 µm S014734 230/500 µm S014863 250/400 µm S014400 250/900 µm S014866 290/450 µm S014735 400/600 µm S014719 600/800 µm S014736 1000/1400 µm S014737 Centralizers 160 µm S012652 250 µm S012600 400 µm S012624 500 µm S014864 600 µm S014718 900 µm S012608 Power Supply 12 V DC W/PLUG ADPT S015185 * Custom blades and centralizers available on request. 47 2002, AFL, all rights reserved. PP-4-00048, Revision 3, 10.26.15

High Tensile Stripper The Fujikura high tensile stripper HTS-12 provides excellent strength performance when removing 250 µm and 400 µm buffer from optical fibers. Heating temperature and duration are fully adjustable for a variety of buffer materials. Self centering blades eliminate the need for an external guide and make replacement quick and easy. Designed for use with the FSM-40F/PM fiber holder system, the HTS-12 is an ideal solution for stripping when high strength fusion splices are a must. PARAMETER Applicable Fiber: Cladding Diameter Coating Diameter Stripping Length Temperature Settings Heating Time Power Supply Dimensions (W x D x H) Weight Operating Conditions VALUE 125 µm 250 µm / 400 µm (optional) 35 mm max 120º, 140º, 160º, or 180º C (adjustable) 3 seconds approximate 100 to 240 VAC (50 to 60 Hz) 140 x 60 x 60 (mm) / 5.51 x 2.36 x 2.36 (inches) 600 g / 1.3 lbs 0ºC to 40ºC, 10% to 85% RH (non-condensing) HTS-12 High Tensile Stripper w/ 250 µm Blades S012094 400 µm Blade for HTS-12 S011946 250 µm Blades for HTS-12 S011942 ADC-08 AC Adapter S010996 ACC-09 AC Power Cord S014390 48 2002, AFL, all rights reserved. PP-4-00030, Revision 1, 2.10.11

PCS-100 Polyimide Coating Stripper Polyimide coated optical fiber are now widely used in the oil and gas and medical industries. The polyimide coating has superior heat and chemical resistance to conventional UV curable coating material, but the coating requires additional care to remove. Dangerous chemical stripping using hot sulfuric acid or burning the coating off are common methods to strip the fiber due to the thin coating and strong coating adhesion to the fiber cladding. AFL s PCS-100 Polyimide Fiber Coating Stripper is the first tool that uses a mechanical stripping method, providing a safe, consistent and quick stripping solution. Features Quick stripping A razorblade is applied to the fiber with specific tension and the coating is precisely planed along the fiber automatically. The process requires less time than the conventional methods of acid or heat. For a 125 µm fiber, 4 stripping passes at 90º rotational positions are typically required, and complete stripping is accomplished within 25 seconds. Larger fiber sizes require more stripping passes (at smaller rotational angle increments). Safe, high quality stripping Because hot acid is not used, the operation is much safer. In addition, the fiber quality degradation is kept at a minimum as the glass surface is not damaged by oxidization of the coating during burning or arcing. Flexible Many parameters, such as the razor blade position and stroke, and fiber rotation angle are all adjustable for various fiber sizes and coating materials. STRIPPING PERFORMANCE Applicable Fiber Silica based Single-mode and Multimode glass fiber Applicable Coating Polyimide coating and UV curable resin coating Cladding Diameter Range 60 to 1200 μm Coating Diameter Range 60 to 1,500 μm Fiber Clamping Adaptable to range of fiber/coating sizes by selection of applicable pair of FH-100-XXX series fiber holders Strip Length 1 to 35 mm Stripping Time 4 stripping passes: 20 seconds 8 stripping passes: 35 seconds 12 stripping passes: 50 seconds Blade Life 350 fibers / blade (In the case of 4 strips per fiber) Stripping Modes 30 user-programmable modes Proof Modes 30 user-programmable modes PROOF TEST FUNCTION Maximum Proof Test Force 2 kgf Typical Proof Test Cycle Time 3 seconds DIMENSIONAL DATA Dimensions 230 mm (W) x 214 mm (D) x 151 mm (H) Weight 5.0 kg excluding AC adapter POWER SOURCE Power Input AC100 to 240 V (50 Hz to 60 Hz) OPERATION AND STORAGE CONDITIONS Operating Conditions Temperature: 0 to 40 C, Humidity: 0 to 95% RH (Non-condensing) Storage Conditions Temperature: -40 to 80 C, Humidity: 0 to 95% RH (Non-condensing) PCS-100 Polyimide Coating Stripper (Includes: FH-100-150, ADC-15 AC Adapter, ACC-02, Instruction manual and PCB-01 replacement blades.) S014973 Accessories FH-100-150 ADC-15 ACC-02 PCB-01 (Box of 50) S014861 S014826 S001171 S015018 49 2011, AFL, all rights reserved. PP-4-00045, Revision 1, 8.30.12

Features Automatic cleaning main components in the machine are automatically cleaned allowing a continuous sequence of fiber preparation operations. Automatic residue collector coating residue and glass scraps are collected in separate containers. Alcohol circulation system alcohol for cleaning is circulated in a closed system enabling a lengthy refill-free operation. Diamond blade a diamond blade is used for cleaving in the tension method cleaving process and provides consistent cleave quality. Reliable stripping method contact of the stripping blade to the fiber is prevented using guides in conjunction with the blade, minimizing damage to fiber during the stripping process. Production-friendly design provides ergonomic, smooth and simple operation. APM-101 and APM-102 Automatic Preparation Machine The APM-101 and APM-102 provide fiber optic preparation automation for assembly operations in a factory environment. Both perform all the operational steps required to strip, clean and cleave the fiber, automatically and with high repeatability. This includes stripping the fiber without degrading fiber quality, cleaning fiber with alcohol to remove coating residue, and cleaving consistently at a right angle to the fiber axis. The entire process is complete in as little as 21 seconds. The APM-101 is designed to accept the FH-100-250 fiber holder that is a component of Fujikura s FSM-100 series and LZM-100 splicing platforms. It can also accept the FH-40/45-250 fiber holder used with the FSM-40/45F and FSM-40/45PM splicing platforms. The APM-102 is designed to accept the FH-60-250 fiber holder used with Fujikura models 70S, 19S and 12S. PARAMETER VALUE Applicable fiber Single-mode and Multimode glass fiber Applicable cladding diameter 125 µm Applicable coating UV curable resin coating Applicable coating diameter 250 µm Fiber clamping for APM-101 FH-100-250 series or FH-40-250 fiber holder Fiber clamping for APM-102 FH-60-250 Cleave length 3 to 9 mm Cleave angle Typical 0.5 Operating time Typical 21 seconds (in the case of 125 µm diameter fiber with 250 µm coating) Daily maintenance Typically every 150 cycles Operation action 1 step (Press start button only) Air pressure 4 bar Operating Condition 0 to 40 C at 0 to 95% RH (non-dew) Storage condition -40 to 80 C at 0 to 95% RH (non-dew) Dimensions 170W x 260D x 120 H (MM) Weight 5.0 kg APM-101 Automatic Preparation Machine (requires FH-100-250 or FH-40/45-250 Fiber Holders) Includes: ADC-15 AC Adapter, ACC-02 Power Cord, ALC-01 Alcohol Container and REG-01 Air Pressure Regulator APM-102 Automatic Preparation Machine (requires FH-60-250 Fiber Holder) Includes: ADC-15 AC Adapter, ACC-02 Power Cord, ALC-01 Alcohol Container and REG-01 Air Pressure Regulator S014974 S015904 Optional Accessories ADC-15 AC Adapter ACC-02 AC Cord CSB-250 Coating Strip Blade CB-04 Cleaver Blade ALC-01 Alcohol Container REG-01 Air Pressure Regulator S014826 S001171 S015029 S015030 S015026 S015028 50 2011, AFL, all rights reserved. PP-4-00002, Revision 4, 10.20.14

USC-03 Ultrasonic Cleaner The Fujikura ultrasonic cleaner model USC-03 provides a simple and cost effective method for cleaning optical fibers when high strength fusion splices are required. This ultrasonic cleaner readily accepts all FH-40-XXX, FH-50-XXX, FH-60-XXX and FH-100-XXX series fiber holders. The Universal Fiber Holder Adapter, available as an optional accessory, enables the use of FH-XXX series fiber holders. The high frequency ultrasonic action cleans debris and coating residue without damaging the exposed cladding and a built-in timer ensures that the required cleaning time is consistently used for all fibers processed. This cleaner, when used in conjunction with high strength stripping and cleaving accessories, produces outstanding results for the most demanding high strength applications. Features Built-in timer assures correct cleaning time Adjustable high intensity vibratory cleaning action Adjustment knob allows fine-tuning of fiber submersion depth Alcohol bath lid prevents cleaning fluid evaporation when machine is idle Included Accessories PARAMETER Applicable Fibers Applicable Fiber Holders Recommended Fluid Tank Capacity Ultrasonic Frequency Fiber Cleaning Length Output Power Timer Range Power Requirement Operating Environment Storage Environment Dimensions (W x D x H) Weight VALUE Single optical fiber FH-40, 50, 60 and 100 series Ethyl-alcohol 24 cc to 45 cc 50 khz 54 mm (max), adjustable 10 W (max) 1 to 99 seconds AC 100 to 240 V / 50 Hz to 60 Hz 0oC to 40oC, 0 to 95% RH, non-condensing -20 C to 60 C, non-condensing humidity 95 x 190 x 157 (mm) / 3.74 x 7.48 x 6.18 (inches) 1 kg / 2.2 lbs USC-03 Universal Fiber Holder Adapter ADC-10 Power Adapter ACC-09 Power Cord S014783 S013568 S012548 S014390 51 2002, AFL, all rights reserved. PP-4-00064, Revision 3, 5.14.15

Optimization Services With the constant introduction of new fiber types as well as the mixing of fiber types in opto-electronic devices such as optical amplifiers and sensors, splicer optimization is essential in minimizing splice loss and keeping splices physically robust. AFL provides an optimization service to determine the optimal settings for any combination of fiber types in any of our splicers. This process involves changing over 50 splicer machine parameters, ranging from splicer arc power to fiber movement rate. These parameters change significantly with fiber characteristics such as fiber diameter, refractive index profile, and dopant composition. In the FSM-45F/PM and FSM-100M/P fusion splicers, optimization plays an important role in maximizing the benefits of sweep arc technology, which minimizes the effects of differences in mode field diameters in a pair of fibers, thereby minimizing splice loss. Splicers also include loss estimation functions, a separate loss estimation optimization is performed to maximize the accuracy of the loss estimation function on the machine to provide the most accurate splice loss readings. All of the parameters can be easily downloaded into a fusion splicer once complete. Please contact AFL for further information on specifications and ordering. 52 2002, AFL, all rights reserved. PP-4-00044, Revision 2, 2.10.11

Please Contact your AFL Sales Rep for information about any of our other products or services. TEST & INSPECTION FLX380 FlexTester High-Performance Micro OTDR C860 QUAD OTDR and Certification Test Kit M310 Multifunction Micro OTDR FIBER INSIDE PLANT FUSEConnect MPO, FC, SC, LC and ST Connectors Poli-MOD Patch and Splice Module Along with a broad range of products, we also offer professional training through the Light Brigade. Over 50,000 people have completed a Light Brigade training course making us the leading fiber optic training provider in the world.

www.aflglobal.com CAT-01007 1.15.2016