ECP-PTU Series 14-Point High-Voltage Programmable Power Terminal Unit Controller Applications Control of equipment such as: roof top units, fan coils, heat pumps, ventilator units, terminal units, lighting systems, refrigeration systems, etc. Control of many other types of HVAC and lighting equipment, as well as power measurement applications Features Supported Platforms LNS Niagara AX Framework Interoperability Based on LONWORKS technology for peer-to-peer communication between controllers LONMARK certified according to the Interoperability Guidelines Version 3.4 Hardware Controller power voltage ranging from 85 to 265VAC 6 universal inputs (jumper-less selection). Input types include: Resistance, 0-10VDC, 4-20mA, Digital and Pulse 4 digital relay (on/off) outputs (up to 277VAC) 4 digital (triac) outputs (up to 265VAC). Output types include: Digital, PWM or floating 1 1 Smart-Sensor supported 1 Integrated EnOcean 868.3MHz wireless receiver (ECP-PTU-W model) 1 Separable base plate allows base with connectors to be shipped to site for installation while engineering is done at the office Din-rail mounting integrated into the fire retardant plastic enclosure Transmit, receive and power LED indicators Status indicator on each output Software Can be programmed by EC-Program or ECgfxProgram More than 60 network variables NVIs & NVOs of changeable type and length Support of fan-in binding for zoning applications Programmable Object Configuration, code and label stored in the controller itself for advanced backup purposes Many programming features available such as PID loops, timers, optimum start, etc. View all internal points (e.g. constants, variables, ) Scheduler Objects All schedules are stored in Flash memory Schedule network variables are of changeable type and length Seven weekday templates per scheduler Four holiday templates per scheduler The are microprocessor-based programmable power terminal unit (PTU) controllers designed to control various building automation applications. Designed to control equipment such as rooftop units, fan coils, heat pumps, ventilator units and terminal units, the ECP- PTU Series can also be used for any lighting control and power measurement applications. The uses the LonTalk communication protocol and is LONMARK certified using the Sensor profile (#1) for its input objects and the Actuator profile (#3) for its output objects. The ECP-PTU wireless series features an integrated wireless receiver that can be used with a variety of wireless sensors and contacts. Distech Controls products offer sophisticated features within a user-friendly interface and this is why ease-of-use has been made their primary characteristic. The can be programmed by using either the EC-gfxProgram graphical programming interface or the EC-Program configuration tool. Both programming tools are available as a plug-in used by any LONWORKS-based software such as Distech Controls Lonwatcher or as a wizard used by a multi-protocol platform software supporting LONWORKS devices such as Distech Controls EC-Net AX Pro powered by the Niagara AX Framework. Distech Controls EC-gfxProgram is a state-of-the-art building automation system programming tool that replaces textual coding with object-oriented programming. The block object toolbox is a vast library of components and functions that users can simply drag and drop to create a control sequence. EC-gfxProgram was developed with Windows user interface (UI) standards using Visual Basic.Net. The EC-Program plug-in is unique in the controls industry because it combines a userfriendly interface with the power and flexibility of a code editor and compiler. Distech Controls EC-Program plug-in uses a unique and simplified version of BASIC that has been developed in-house and that is custom made to suit controls requirements. 1. Available only when programmed with EC-gfxProgram.
Product Warranty & Total Quality Commitment All Distech Controls product lines are built to meet rigorous quality standards and carry a two-year warranty. Distech Controls is an ISO 9001 registered company. Distech Controls' products provide both the contractor and the end user with the flexibility of using best-ofbreed products in system design. Available Controller Models ECP-PTU 14-Point High-Voltage Programmable Power Terminal Unit Controller - 6 universal inputs - 4 digital relay outputs (up to 277VAC) - 4 digital (triac) outputs (up to 265VAC ECP-PTU-W 14-Point High-Voltage Programmable Power Terminal Unit Wireless Controller Same as ECP-PTU but with integrated 868.3MHz receiver with internal antenna. Not intended for installation inside of a metal enclosure. ECP-PTU ECP-PTU-W (with External Antenna) 14-Point High-Voltage Programmable Power Terminal Unit Wireless Controller Same as ECP-PTU but with integrated 868.3MHz receiver with external antenna. Recommended when installed in a metal enclosure. All controller models requiring the external antenna must have the antenna ordered at the initial purchase. The external antenna cannot be added to the controller at a later time.
Supported Platforms LONWORKS Network Services (LNS) LNS is a client-server platform that allows multiple users, running different LNS-compatible applications, to access a common source for directory, installation, management, monitoring and control services for the network system being managed. Distech Controls Lonwatcher is an example of a LonWorks-based network management tools that can use Plug-Ins to configure and monitor controllers and devices in the control system. Niagara AX Framework The Niagara AX Framework is the next generation of Niagara that builds on the multi-protocol, web-based concept of its predecessor. Niagara AX normalizes the development environment for building new software. Distech Controls EC-Net AX Pro is a multi-protocol software platform that can use Wizards to configure and monitor controllers and devices in the control system. Distech Controls Software LNS Plug-Ins and EC-Net AX Wizards EC-gfxProgram Graphical Programming Tool Distech Controls EC-gfxProgram is a programming tool that allows for the building of control sequences by dragging and dropping block objects and then linking the objects with a simple click, select and release. Choose the desired block objects from a vast library of commonly used functions as well as designing custom blocks. With a user-friendly interface and intuitive programming environment, EC-gfxProgram makes HVAC programming easier than ever. Refer to the EC-gfxProgram datasheet for more information. EC-Program Programming Tool Distech Controls EC-Program is unique in the controls industry because it combines a user-friendly GUI (Graphical User Interface) with the power and flexibility of a code editor and compiler. The EC-Program configuration tool uses a special and simplified version of BASIC that has been developed in-house and that is custom made to suit control requirements. Refer to the EC-Program datasheet for more information. EC-gfxProgram Software features: Block-oriented programming Live debugging allows user to view code execution, input/output values and to detect errors in real-time EC-Program Software features: Line-by-line programming High-precision integers with 2 decimals places (±83886.07) Uses integers ranging from ±32767 Direct support of SNVTs of 1 and 2 bytes (17 NVIs & 17 NVOs; changeable type and length) 5 NVI Fan-in bindings (changeable type) 3 NVI Hisel, Lowsel, Sum and Average (up to 85 NVs) 2 NVI Hisel and Lowsel 16 PID loops 2 Schedules. 2 changeable type and length NVI and NVO. Supported types are: SNVT_tod_event; SNVT_occupancy; and SNVT_hvac_mode Extensive block library of the most commonly used functions divided into 11 convenient categories containing over 80 block objects A code library to store favorite or most commonly used code or code sections Built-in screen to view and configure internal point values such as variables, constants, etc. 18 NVIs and 18 NVOs; changeable type and length 2 NVI Fan-in bindings 1 NVI High and Low selection 1 NVI Weighted Average 10 PID loops 4 Schedules. 4 changeable type and length NVO. Supported types are: SNVT_tod_event; SNVT_occupancy; and SNVT_hvac_mode Programming functions such as Reserved Words (SQRT, SWITCH, LIMIT, etc.) Up to 24 trend log objects for a total of 12,000 stored events in the controller Other Configuration Software EC-Scheduler Tool Distech Controls EC-Scheduler allows users to easily configure a week-based schedule and a special day schedule for holidays. Easily add and remove the special day event into the calendar by a simple click of the mouse! RTC Configuration Tool Distech Controls RTC Configuration Tool allows users to manage the time, date and daylight saving time for use with any device on the network.
Recommended Peripherals Supported Smart-Sensors (EC-gfxProgram Only) EC-Smart-Sensor-100: Occupancy override EC-Smart-Sensor-FC: Fan speed selection EC-Smart-Sensor-200: Fan speed selection Occupancy override HVAC mode selection EC-Smart-Sensor-FC-CF: Fan speed selection C/ F toggle button Temperature Sensors EC-SENSOR EC-SENSOR-LO EC-SENSOR-SLO-F EC-SENSOR-SLO-C EC-SENSOR-SLO-CW EC-SENSOR-AVG Room temperature sensor Room temperature sensor with LED and override push button Room temperature sensor with LED, override push button and setpoint adjustment ( F) Room temperature sensor with LED, override push button and setpoint adjustment ( C) Room temperature sensor with LED, override push button and setpoint adjustment (cool/warm) Averaging room temperature sensor, no setpoint (Up to 3 in parallel) Wireless Sensors (Wireless controllers with EC-gfxProgram only) SR04 Series Wireless, solar-cell powered room temperature sensor with optional setpoint adjustment, override button and fan speed control. SR04 rh Series Wireless, solar-cell powered room temperature/humidity sensor with optional setpoint adjustment and override button. SR65 Wireless, solar-cell powered outdoor temperature sensor. SR65 VFG Wireless, solar-cell powered surface temperature contact sensor. SR65 AKF Series Wireless, solar-cell powered duct temperature sensor. SR-PIR 360 Wireless motion detector. 2-channel Light Switch 4-channel Light Switch 2-/4-channel wireless light switches (European models). PTM265 PTM265D 2-/4-channel wireless light switched (North American models). For more information on these or other peripherals please refer to our web site at or contact.
Product Specifications Product Specifications Power Wireless Receiver 1 Voltage: 85-265VAC; 50/60HZ; Over-voltage category II Wireless Receiver: EnOcean RCM120 868.3MHz Pollution degree 2 Number of Wireless Inputs: 5 14 Protection: 2.0A Fast-acting breaking capacity fuse Inputs ECP-PTU series: Quantity: 6 - Maximum Consumption: 20VA Input Types: Universal (software configurable) Double insulation devices -Voltage: 0-10VDC -Current: 4-20mA with 249Ω external resistor Environmental (wired in parallel) Operating Temperature: 0 o C to 50 o C; 32 o F to 122 o F (indoor use) -Digital: Dry contact Storage Temperature: -20 o C to 70 o C; -4 o F to 158 o F -Pulse: Dry contact; 500ms minimum ON/OFF Relative Humidity: 0 to 90% Non-condensing -Resistor: General Thermistor 2 : 10KΩ Type 2, 3 Processor: Neuron 3150; 8 bits; 10MHZ Range: -40 o C to 150 o C; -40 o F to 302 o F Memory: Non-volatile Flash 64K (APB application) Platinum: Pt1000 (1KΩ) Non-volatile Flash 128K (Storage) Range: -40 o C to 150 o C; -40 o F to 302 o F Communication: LonTalk protocol Pt100 (100Ω) Channel: TP/FT-10; 78Kbps Range: -40 o C to 135 o C; -40 o F to 275 o F Status Indicator: Green LEDs: power status & LON TX Nickel 3 : Ni1000 (1KΩ) Orange LEDs: service & LON RX Range: -40 o C to 150 o C; -40 o F to 302 o F Communication Jack: LON audio jack mono 1/8" (3.5mm) Potentiometer: Translation table configurable on several points Enclosure Input Resolution: 16-bit analog / digital converter Material: Color: ABS type PA-765A Blue casing & grey connectors Dimensions overall: 7.7 x 4.7 x 2.0 (195.6mm x 119.4mm x 50.8mm) Outputs Measurement Category: CAT I Shipping Weight: 1.17lbs (0.53kg) Quantity: 8 Installation: Direct din-rail mounting or wall mounting through 3 Digital Relay Contacts: Up to 277VAC, N.O. contacts mounting holes (see figure above for hole positions) (Fan Speeds) 3A (inductive or resistive) Electromagnetic Compatibility All share the same common CE -Emission: EN61000-6-3: 2001; Generic standards for 1 Digital Relay Contact: Up to 277VAC, N.O. contacts residential, commercial and light-industrial (Heater) 3A (inductive) and 10A (resistive) environments Dedicated common -Immunity: EN61000-6-1: 2001; Generic standards for 4 Digital: 1A @ 20.4-265VAC Triac (digital - on/off, floating 3 residential, commercial and light-industrial or PWM) environments - PWM control: adjustable period from FCC: This device complies with FCC rules 2 seconds to 15 minutes part 15, subpart B, class B - Floating control: requires two consecutive outputs 3 Agency Approvals - Min pulse on/off: 500msec. - Adjustable drive time period UL Listed (CDN & US): UL61010-1 Process Control Equipment, Electrical Protect the output with an external 4A fast-acting, Material 4 : UL94-5VA high-breaking fuse. 1 common per pair of outputs 1. Available only on the ECP-PTU-W model and when programmed with EC-gfxProgram. 2. For temperature type inputs it is recommended that a 10KΩ thermistor be used due to better accuracy over the Pt1000, Pt100 or Ni1000. 3. Available only when programmed with EC-gfxProgram. 4. All materials and manufacturing processes comply with the Waste Electrical and Electronic Equipment (WEEE) directive and the RoHS directive. 5. Some wireless sensors may use more than one wireless input from the controller.
Functional Profile (with EC-gfxProgram) Functional Profile (with EC-Program) Specifications subject to change without notice. Distech Controls logo is a trademark of Distech Controls Inc.; LONMARK, LONWORKS, LonTalk, LON and LNS are registered trademarks of Echelon Corporation; Niagara AX Framework is a registered trademark of Tridium, Inc.; Windows, Visual Basic.Net is a registered trademark of Microsoft Corporation. *05DI-DSEPTUX-20* 05DI-DSEPTUX-20