Spectra i.net Quick Wiring and Installation Manual RJ45 Audio Out OP
Important Safety Instructions WARNING To reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture. Equipment should not be exposed to dripping or splashing and no objects filled with liquids should be placed on the equipment. 1. This manual is not a substitute for the complete Spectra i.net manual. Please read the entire Spectra i.net installation manual. Always use common sense! 2. Read these instructions. 3. Keep these instructions. 4. Heed all warnings. 5. Follow all instructions. 6. Do not use this apparatus near water. 7. Clean only with dry cloth. 8. Do not block any ventilation openings. Install in accordance with the manufacturer s instructions. 9. Do not install near any heat sources such as radiators, heat registers, stoves, or other equipment (including amplifiers) that produce heat. 10. Only use attachments/accessories specified by the manufacturer. 11. Unplug this equipment during lightning storms or when unused for long periods of time. 12. Refer all servicing to qualified service personnel. Servicing is required when the equipment has been damaged in any way, such as if the power-supply cord or plug is damaged; liquid has been spilled or objects have fallen into the equipment; the equipment has been exposed to rain or moisture; does not operate normally; or has been dropped. 13. Follow COMPLETE instructions for wiring the sound masking system and ALL system checks before powering the system on for the first time, to avoid irreversible damage to the components. Ensure proper polarity for wiring with regard to power, data and audio output. 14. Do NOT plug any Spectra i.net devices into a computer or network or like equipment other than Spectra i.net devices unless specifically asked to do so in the installation manual. 1
1. Makesureyouhavethecorrectdrawings. 2. MakesureyouhavereceivedandreviewedtheSpectrai.Net installationmanual. 3. Makesureyouhavereviewedallsafetyinstructions. 4. SecureOPs,i.LON,Routers,Hubs,andMPIimmediatelyastheyareexpensiveitems. 5. ReadthroughtheSpectrai.Net installationmanualcompletelyforallproperprocedures, hookups,andinstallationinstructions. 6. Verifyallapplicablelocalandfederalcodes. 7. Forpower,use16gauge,2conductorwire.ObservepolarityoryouwillDAMAGEtheOP equipmentirreversibly. 8. Reviewallaudioanddatawiringandconnectionsbeforebeginninginstallationof equipment. 9. Usecommonsense. RJ45 AudioOutOP WiringReview USE568BWiringStandardsforDataWiring WIREMUSTBEPLENUMRATED FollowAllApplicableCodes AUDIOWireConnection(RJ45)DATAWireConnection(RJ45)568B 8CONDUCTOR8CONDUCTOR UseplenumratedCat5e,8conductorwith RJ45connectors. UseplenumratedCat5e,8conductorwith RJ45connectors. The information contained herein is proprietary to Lencore Acoustics Corp. and copyright protected. No part of this manual can be copied, used or distributed without prior authorization from Lencore Acoustics Corp. Copyright 2008-2011 Page 2 2
AudioCable(Straight)8Conductor CableisrunfromOPtospeakersandfrom speakertospeaker. ThepinoutontheRJ45isstraight.Useonly8 conductor! HelpfulHint: UseadifferentcolorforyourCat5e/5Ecablesto easilyidentifyaudiovs.datacableruns. RJ45 AudioOutOP NOTE:Lencorerecommends longthroat connectorsforintegrityandeasyuse. AudioCable DataCable(Straight) 8Conductor CableisrunfromMPItothe1 st OPorfromi.Lontothe 1 st OP.CablesaretherunfromOPtoOP. ThepinoutontheRJ45isstraight. TIA/EIA 568Bwiringisstandard. RJ45 Pin1andPin2arethenetworkwires(orange\whiteand orangewires). NOTE:Lencorerecommends longthroat connectorsforintegrityandeasyuse. Pin3andPin6areforinitialization(green/whiteand greenwires). Pin4andPin5areforpaging(blueandblue/whitewires). Pin 7 and Pin 8 are for music (brown/white and brown wires). To request a complete installation manual or for more information contact Lencore at info@lencore.com www.lencore.com PH: 516.682.9292 3
Install OP s sequentially. Follow drawing for OP sequence and placement. 4
Schematic2 Spectrai.Net SoundMasking ConnectingSystemtoMPI 5
6
7
5 Spectra i.net Sound Masking Additional Power Supplies with Common Ground Between Power Zones Original Power Supply Notice the common ground between power zones. 8
Schematic 6 Spectra i.net Sound Masking Continuity Testing Diagram 9
10
NOTES: (Mark Any or All Changes on Drawings) (NOTE Any Unexpected Field Conditions) 11
LENCORE ACOUSTICS CORP. 1 Crossways Park Drive West Woodbury, NY 11797 516-682-9292 info@lencore.com www.lencore.com The information contained herein is proprietary to Lencore Acoustics Corp. and copyright protected. No part of this manual can be copied, used or distributed without prior authorization from Lencore Acoustics Corp. Copyright 2015 REV 5001-15-05 12