Doepke The insulated consumer unit range consists of four enclosure sizes to enable any combination from 1 to 16 usable ways. Designed to meet BSEN60439-3 these easy to install consumer units accept the complete range of Doepke RCDs which have been manufactured to BSEN61008, and both the Doepke 6KA and 1OKA BSEN60898 MCB ranges. MAIN SWITCH OPTIONS 20 RCD 100A, 2 pole, 2 module Split Load Twin Tariff Dual RCD A combination of any of the above. choice of 25A, 40A, 63A, 80A 100A or 125A - 30mA 2 pole 2 module Two 100A 2 pole 2 module isolators. Split Load with 2 RCDs protecting circuits. (choice as RCD above) www.doepke.co.uk
CONSUMER UNITS The modern home of today uses many need, consumer units must be able to protection for the circuits and the people who use and install them. were made aware of the need to produce reliable in service and looked good in any We believe that our product designed and the very best of German manufactured way in consumer unit design. sales@doepke.co.uk S protection devices, is now leading the E manufactured in the UK and incorporating R location. Flexible neutral/live copper links Large capacity brass terminal Easily removable busbar protection cover M3.5 Inserts for rail and terminal fixings RCD s in two modules up to 125 amps Large terminal capacity for fork or pin busbar Two module 100 amp isolator as standard Contact position indicator on protection devices High quality German manufactured RCD s and MCB s British designed and assembled consumer unit U a product that was stylish, quick to install, T range and our protection devices, we Clearly legible identification markings Pre-printed self adhesive circuit labels Choice of eight rear fixing holes Interchangeable 100amp busbar A When we designed our consumer unit Soft magnolia colour with tinted polycarbonate door M3.5 captive front cover fixing screws Trunking entries top and bottom 25mm double insulated tail entries 16mm earth cable entries Knockouts that really do knockout E offer more control and higher levels of.. F electrical appliances and to meet this 21
Doepke DESIGNED TO MEET BSEN60439-3 These easy to install consumer units accept the complete range of Doepke RCDs, which have been manufactured to BSEN61008, and both the Doepke 6KA and 1OKA MCB ranges conforming to BSEN60898. The units are built using a DIN rail mounting. The busbar supplied has the maximum number of ways for each size of enclosure. In some applications a few ways will be redundant. as main switch Rating Usable Ways Reference 100A 2 * DC 2ND 100A 4 DC4 100A 8 DC8 100A 12 DC12 100A 16 DC16 * ND = No Door RCD as main switch RCD Rating Usable Ways Reference 63A 30mA 2 * DCR 2/63ND 63A 30mA 4 DCR 4/63 63A 30mA 8 DCR 8/63 80A 30mA 4 DCR 4/80 80A 30mA 8 DCR 8/80 80A 30mA 12 DCR 12/80 80A 30mA 16 DCR 16/80 100A 30mA 8 DCR 8/100 100A 30mA 12 DCR 12/100 100A 30mA 16 DCR 16/100 125A 30mA 12 DCR 12/125 125A 30mA 16 DCR 16/125 22 www.doepke.co.uk
CONSUMER UNITS SPLIT LOAD CONSUMER UNITS The split load units are also built using a DIN rail mounting so that the position of the split can be determined on installation. The busbar is supplied complete and must be cut and trimmed at the appropriate position. * Other RCD combinations available, please ask. Split Load - Dual RCD * RCD 1 RCD 2 Usable Rating Rating Rating Ways Reference 100A 63A 30mA 63A 30mA 8 DC 08SL/63/63 100A 63A 30mA 63A 30mA 12 DC 12SL/63/63 100A 80A 30mA 63A 30mA 12 DC 12SL/80/63 Split Load Rating RCD Rating Usable Ways Reference 100A 63A 30mA 6 DC 6SL/63 100A 63A 30mA 10 DC 10SL/63 100A 63A 30mA 14 DC 14SL/63 100A 80A 30mA 10 DC 10SL/80 100A 80A 30mA 14 DC 14SL/80 100A 100A 30mA 10 DC 10SL/100 100A 100A 30mA 14 DC 14SL/100 Twin Tariff 1 2 Rating Rating Usable Ways Reference 100A 100A 6 DCTT 6SL 100A 100A 10 DCTT 10SL 100A 100A 14 DCTT 14SL sales@doepke.co.uk 23
Doepke IP55 CONSUMER UNITS The IP55 consumer units are assembled in the UK using very high quality plastic enclosures. Six enclosure sizes enable any combination between 2 to 32 usable ways. Designed to meet BSEN60439-3 these easy to install consumer units accept the complete range of Doepke RCDs which have been manufactured to BSEN61008, and both the Doepke 6KA and 1OKA MCB ranges conforming to BSEN60898. MAIN SWITCH OPTIONS 100A, 2 pole, 2 module. RCD choice of 25A, 40A, 63A, 80A or 100A - 30mA 2 pole 2 module. Split Load A combination of any of the above. Up to 14 way in a single row enclosure and from 20 to 32 way in a double row enclosure. Dual RCD Split Load with 2 RCDs protecting circuits. (choice as RCD above) (Twin Tarriff & Time delay versions to special order). The illustration shows the DC 10+10SL/80-IP55 double row split load. MCBs are included to show a complete unit. These are not supplied in the basic specification. 24 www.doepke.co.uk
IP55 CONSUMER UNITS with or RCD as main switch and single or double row Split Load The units are built using a DIN rail mounting. The busbar supplied has the maximum number of ways for each size of enclosure. In some applications a few ways will be redundant. Split Load - Dual RCD * RCD 1 RCD 2 Usable Rating Rating Rating Ways Reference 100A 63A 30mA 63A 30mA 8+10 DC 18SL/63/63-IP55 100A 80A 30mA 63A 30mA 8+10 DC 18SL/80/63-IP55 100A 80A 30mA 80A 30mA 8+10 DC 18SL/80/80-IP55 100A 80A 30mA 63A 30mA 14+16 DC 30SL/80/63-IP55 100A 80A 30mA 63A 30mA 14+16 DC 30SL/80/80-IP55 100A 80A 30mA 63A 30mA 14+16 DC 30SL/100/10-IP55 * Other RCD combinations available, please ask. RCD as main switch RCD Rating Usable Ways Reference 40A 30mA 2 DCR 2/40-IP55 40A 30mA 6 DCR 6/40-IP55 63A 30mA 2 DCR 2/63-IP55 63A 30mA 6 DCR 6/63-IP55 63A 30mA 10 DCR 10/63-IP55 80A 30mA 6 DCR 6/80-IP55 80A 30mA 10 DCR 10/80-IP55 80A 30mA 16 DCR 16/80-IP55 100A 30mA 10 DCR 10/100-IP55 100A 30mA 16 DCR 16/100-IP55 as main switch Rating Usable Ways Reference 100A 2 DC 2-IP55 100A 6 DC 6-IP55 100A 10 DC 10-IP55 100A 16 DC 16-IP55 Split Load Rating RCD Rating Usable Ways Reference 100A 63A 30mA 10+10 DC 20SL/63-IP55 100A 63A 30mA 16+16 DC 32SL/63-IP55 100A 80A 30mA 10+10 DC 20SL/80-IP55 100A 80A 30mA 16+16 DC 32SL/80-IP55 100A 100A 30mA 10+10 DC 20SL/100-IP55 100A 100A 30mA 16+16 DC 32SL/100-IP55 CONSUMER UNITS sales@doepke.co.uk 25
Doepke METAL CONSUMER UNITS The metal consumer units are manufactured in the UK to a very high standard of finish. Five enclosure sizes enable any combination between 1 to 22 usable ways. Finished in light grey, the units look good in either a domestic or commercial environment. The design complies with BSEN 60439-3 and accepts the full range of Doepke modular devices. The front cover is secured by M3.5 screws and the hinged metal flap has a magnetic fastening. MAIN SWITCH OPTIONS 100A 2pole 2 module RCD choice of 25A, 40A, 63A, 80A, 100A or 125A - 30mA 2 pole, 2 module Split Load A combination of any of the above. Dual RCD Twin Tariff Split Load with 2 RCDs protecting circuits. (choice as RCD above) Two 100A, 2 pole, 2 module isolators. 26 www.doepke.co.uk
METAL CONSUMER UNITS with or RCD as main switch CONSUMER UNITS The units are built using a DIN rail mounting. The busbar supplied has the maximum number of ways for each size of enclosure. In some applications a few ways will be redundant as main switch Rating Usable Ways Reference 100A 2 * DCM 2ND 100A 4 DCM 4 100A 8 DCM 8 100A 12 DCM 12 100A 16 DCM 16 100A 22 DCM22 * ND = No Door RCD as main switch RCD Rating Usable Ways Reference 63A 30mA 2 * DCMR 2/63ND 63A 30mA 4 DCMR 4/63 63A 30mA 8 DCMR 8/63 80A 30mA 4 DCMR 4/80 80A 30mA 8 DCMR 8/80 80A 30mA 12 DCMR 12/80 80A 30mA 16 DCMR 16/80 100A 30mA 8 DCMR 8/100 100A 30mA 12 DCMR 12/100 100A 30mA 16 DCMR 16/100 100A 30mA 22 DCMR 22/100 125A 30mA 12 DCMR 12/125 125A 30mA 16 DCMR 16/125 125A 30mA 22 DCMR 22/125 sales@doepke.co.uk 27
Doepke SPLIT LOAD METAL UNITS The split load units are also built using a DIN rail mounting so that the position of the split can be determined on installation. The busbar is supplied complete and must be cut and trimmed at the appropriate position. * Other RCD combinations available, please ask. Split Load - Dual RCD * RCD 1 RCD 2 Usable Rating Rating Rating Ways Reference 100A 63A 30mA 63A 30mA 8 DCM 08SL/63/63 100A 63A 30mA 63A 30mA 12 DCM 12SL/63/63 100A 80A 30mA 63A 30mA 12 DCM 12SL/80/63 100A 63A 30mA 63A 30mA 18 DCM 18SL/63/63 100A 80A 30mA 63A 30mA 18 DCM 18SL/80/63 100A 80A 30mA 80A 30mA 18 DCM 18SL/80/80 Split Load Switch Rating RCD Rating Usable Ways Reference 100A 63A 30mA 6 DCM 6SL/63 100A 63A 30mA 10 DCM 10SL/63 100A 63A 30mA 14 DCM 14SL/63 100A 80A 30mA 10 DCM 10SL/80 100A 80A 30mA 14 DCM 14SL/80 100A 80A 30mA 20 DCM 20SL/80 100A 100A 30mA 10 DCM 10SL/100 100A 100A 30mA 14 DCM 14SL/100 100A 100A 30mA 20 DCM 20SL/100 28 www.doepke.co.uk
GARAGE & SHOWER UNITS GARAGE & SHOWER UNITS CONSUMER UNITS The garage units are supplied in two versions offering either IP55 or IP30 protection. Both have similar electrical specifications as well as fitted earth and neutral terminals and versatile cable entries. These units are recommended for use in Garages, Utility Rooms, House Extensions and Outbuildings. Dimensions (mm) H194 x W123 x D105 Dimensions (mm) H135 x W50 x D75 Garage/Utility Units Incoming Outgoing MCB Ratings RCD Rating 1 2 Reference 40A 30mA 16A 6A DGU1.IP55 40A 30mA 16A 6A DGU2.IP30 Shower Units Rating Reference 40A 30mA RCBO DSHR1.IP55 63A 30mA RCD+MCB DSHR2.IP55 The shower units are available in two different specifications, both in a high quality 4 module enclosure with transparent door giving IP55 protection. They are both fitted with earth and neutral terminals and are recommended for Showers, Jacuzzis and Water Features. sales@doepke.co.uk 29
Doepke TECHNICAL SPECIFICATIONS Insulated Consumer Units Dimensions (mm) Enclosures Reference Height Width Depth Reference DC 4 DCR 4 205 150 100 DE 6 DC 8 DCR 8 DC 6SL 205 220 100 DE 10 DC 12 DCR 12 DC 10SL DC 08SL 205 290 100 DE 14 DC16 DCR 16 DC 14SL DC 12SL 205 360 100 DE 18 The insulated consumer units are manufactured from high impact, flame retardent, ABS material, coloured magnolia. The removeable transparant hinged cover is manufactured from polycarbonate to protect the modular devices. The easy to remove cable knockout entries are on the top, bottom and at the rear of the enclosure. The range has been designed to comply with BSEN 60439-3. IP55 - Insulated Consumer Units Dimensions (mm) Enclosures Reference Height Width Depth Reference DC 2 DCR 2 194 123 105 DIMEF 4 DC 6 DCR 6 194 194 105 DIMEF 8 DC 10 DCR 10 DC 8SL 259 274 138 DIMEF 12 DC 16 DCR 16 DC 14SL DC 12SL 259 372 138 DIMEF 18 Metal Consumer Units Dimensions (mm) Enclosures The metal consumer unit range is manufactured from 1mm CR4 cold reduced mild steel, phosphate pre-treated and powder coated to RAL 7035. Cable knockouts are provided on the top, bottom and rear faces. The hinged metal cover is held in the closed position by a magnet. The range has been designed to comply with BSEN 60439-3. TP+N Distribution Boards 200 Reference Height Width Depth DTPN 4 569 420 140 DTPN 6 569 420 140 DTPN 8 730 420 140 DTPN 12 730 420 140 DTPN 16 1053 420 140 DTPN 24 1053 420 140 DTPNEX1 200 420 140 DC 20SL DC 18SL 384 274 138 DIMEF 2/24 DC 32SL DC 30SL 409 372 138 DIMEF 2/36 560 372 138 DIMEF 3/54 Reference Height Width Depth Reference DCM 4 DCMR 4 204 165 105 DME 6 DCM 8 DCMR 8 DCM 6SL 204 254 105 DME 10 DCM 12 DCMR 12 DCM 10SL DCM 08SL 204 307 105 DME 14 DCM 16 DCMR 16 DCM 14SL DCM 12SL 204 396 105 DME 18 DCM 22 DCMR 22 DCM 20SL 204 510 105 DME 24 The 200amp range of three phase and neutral distribution boards are manufactured from 1.2mm CR4 cold reduced mild steel, phosphate pre-treated and powder coated to RAL 7035. Removeable gland plates top and bottom are in 2mm steel and allows simple mounting of both extension and spreader boxes. The hinged and lockable door provides protection for the modular devices. The 200amp copper busbar requires one of our incoming kits to complete the distribution board. Complies with BSEN 60439-1+3. 50 www.doepke.co.uk