October 2007 THE FIVE PHASE CERTIFICATION AND APPROVAL PROCESS 1.0 PURPOSE

Similar documents
MAINTENANCE ORGANIZATION CERTIFICATION JOB AID AND SCHEDULE OF EVENTS

AIRWORTHINESS. AMO Number. Postal address. address PARTICULARS REGARDING THE APPLICANT

Advisory Circular. Subject: INTERNET COMMUNICATIONS OF Date: 11/1/02 AC No.: AVIATION WEATHER AND NOTAMS Initiated by: ARS-100

Reference No: 04/14. Issue Date: 16/10/14

ACCEPTABLE MEANS OF COMPLIANCE (AMC) GUIDE FOR ACCEPTANCE OF MANUALS REQUIRED BY AUA-OPS2

Certification in the various domains

This Advisory Circular relates specifically to Civil Aviation Rules Part 147. Published by Civil Aviation Authority PO Box 3555 Wellington 6140

RFM Procedure 3: Certification Body Approval for Chain of Custody Standard. Alaska Responsible Fisheries Management (RFM) Certification Program 17065

Qualification details

LAMPIRAN PERATURAN DIREKTUR JENDERAL PERHUBUNGAN UDARA NOMOR : KP 254 Tahun 2017 TANGGAL : 25 September Staff Instruction

CIVIL AVIATION REQUIREMENT SECTION 2 - AIRWORTHINESS SERIES E PART XII EFFECTIVE : FORTHWITH

SMS for Part 121 Notice of Proposed Rulemaking (NPRM)

ISSUE, CONVERSION, VALIDATION, EXTENSION AND RENEWAL OF AIRCRAFT MAINTENANCE ENGINEER S LICENSE

Accreditation Body Evaluation Procedure for AASHTO R18 Accreditation

CAAC/CAD (Hong Kong)/AACM (Macao)

AQMS AUDITOR APPLICATION GUIDE

Personnel Certification Program

European Aviation Safety Agency

Quality Assurance Procedure Use of Accreditation Body & FP Certification FZE Marks, Logos and Symbols

ISO/IEC 17065:2012 VERTICAL/FILE REVIEW ASSESSMENT

MARPA DOCUMENT MARPA Revision 1.1

2 ACCREDITED AUDITORS

PT. DIRGANTARA INDONESIA (PERSERO) DOA Initial Investigation Process By DGCA Republic of Indonesia

The International Civil Aviation Organization s (ICAO) Instructor Qualification Process

SECTION C CATEGORY A MAINTENANCE CERTIFYING MECHANIC

AUDIT PROGRAM. Revision 6 Dated September 29, Management Systems Analysis, Inc. P.O. Box 136, Royersford, PA

SAI GLOBAL PRODUCT SERVICES

USOAP Continuous Monitoring Approach (CMA) Workshop

NOMINATED REPRESENTATIVE AND SIGNATORIES: RESPONSIBILITIES, QUALIFICATION AND APPROVAL

AQMS AUDITOR AUTHENTICATION BODY AQMS AUDITOR APPLICATION GUIDE

PARAGRAPH INDEX QUALITY ASSURANCE INSTRUCTIONS TO SUPPLIERS NON DESTRUCTIVE TESTING

MARPA DOCUMENT MARPA 1100 DRAFT

IAF Mandatory Document for the Transfer of Accredited Certification of Management Systems

Global Wind Organisation CRITERIA FOR THE CERTIFICATION BODY

2 ACCREDITED AUDITORS

PMA Parts by Licensing Agreement

Audit Report. City & Guilds

Orion Registrar, Inc. Certification Regulations Revision J Effective Date January 23, 2018

SCHEME HANDBOOK REFCOM F GAS COMPANY CERTIFICATION SCHEME. Refcom F gas Company Certification Scheme Scheme Handbook V9.1 February 2017 Page 1 of 6

Guidance for Centre Internal Verification Procedures

Scheme Document SD 003

Air. CERTIFICATION PROCESS FOR CORE & SHELL v2.0. RESET Air PROCESS for Core & Shell v2.0. Copyright 2018 RESET

AMENDMENT TO THE COMPULSORY SPECIFICATION FOR SWITCHES FOR FIXED INSTALLATIONS (VC 8003)

THE REPUBLIC OF LIBERIA LIBERIA MARITIME AUTHORITY

CNAS-RC01. Rules for Accreditation of Certification Bodies

NEBOSH Part A accreditation criteria

IECEx Guide Guidance for Applications from Service Facilities seeking IECEx Certification

CANADIAN PAYMENTS ASSOCIATION LVTS RULE 11 CHANGE MANAGEMENT, TESTING AND CERTIFICATION

New Zealand Certificate in Regulatory Compliance (Operational Practice) Level 4

Audit Report. The Prince s Trust. 27 September 2017

Ref No: RACS/PCS/10 Page 1 of 7. Revision No: 00 Revision Date: October 1, 2018 PRODUCT CERTIFICATION SCHEME FOR ELECTRICAL EQUIPMENT

Abu Dhabi Certification Scheme for Assistant Engineer Assessment and Surveillance Plan for Assistant Engineer

Audit Report. The Chartered Institute of Personnel and Development (CIPD)

GLOBAL MANAGEMENT CERTIFICATION SERVICES PRIVATE LIMITED PROCEDURE

C-BPVCA ADMINISTRATIVE PROCEDURES DELEGATED TO ASME CONFORMITY ASSESSMENT STAFF

Implementation of the NATS-only recommendations of the Independent Enquiry

Rules for LNE Certification of Management Systems

Abu Dhabi Certification Scheme for Beauty Salon Sector

Process for the Evaluation and Acceptance of Building Products in the USA

Standard COM-002-2a Communications and Coordination

DNO Connection Module. SP Energy Networks

PRODUCT CERTIFICATION SCHEME FOR MECHANICAL-CUSTOMIZED VEHICLES

Indonesia - SNI Certification Service Terms

PRODUCT CERTIFICATION SCHEME FOR ENERGY DRINKS

APPROVAL FCA103 ISSUED BY THE COMPETENT AUTHORITY OF THE UNITED STATES EXPIRATION DATE: March 31, 2019

Procedure for the Recognition of Foreign Testing Laboratories

Qualification details

USOAP Continuous Monitoring Approach (CMA) Workshop

Audit Report. Mineral Products Qualifications Council (MPQC) 31 March 2014

APPROVAL PROCESS TO BE FOLLOWED FOR PROVISIONAL ACCREDITATION OF CBs UNDER FM CERTIFICATION SCHEME

FIRE SAFETY GUIDELINES

LVTS RULE 11 CHANGE MANAGEMENT, TESTING AND CERTIFICATION 2018 CANADIAN PAYMENTS ASSOCIATION

Advisory Circular (AC)

IPC Certification Scheme IPC QMS/EMS Auditors

CERTIFICATION GUIDELINES FOR MANAGEMENT SYSTEM

Student Union Social Programming Board Constitution

GUIDE ON APPLICATION FOR ROUNDTABLE FOR SUSTAINABLE PALM OIL PRINCIPLES AND CRITERIA (RSPO P & C) INCLUDING GROUP CERTIFICATION

FedEx Express ASAP FAQs

ICAO Instructor Qualification Process

DEMOCRATIC SOCIALIST REPUBLIC OF SRI LANKA MERCHANT SHIPPING SECRETARIAT MINISTRY OF PORTS AND SHIPPING

A6 Training. A6.1 General. A6.2 Extract from the Health and Safety in Employment Act Training and supervision

Scheme Document. For more information or help with your application contact BRE Global on +44 (0) or

PRODUCT CERTIFICATION SCHEME FOR WATER PRODUCTS

IPC Certification Scheme IPC Management Systems Auditors

Audit Report. English Speaking Board (ESB)

Session 2: CORSIA MRV System: Monitoring of CO 2 Emissions. ICAO Secretariat

USDA ISO Guide 65 Program Accreditation for Certification Bodies

Missouri Housing Development Commission Certified Property Management Agent Program

t a Foresight Consulting, GPO Box 116, Canberra ACT 2601, AUSTRALIA e foresightconsulting.com.

MFC Power General Partner Ltd.,

Ferrous Metal Transfer Privacy Policy

AGENCY APPLICATION AND PARTICIPATION AGREEMENT MISSOURI POLICE CHIEFS CHARITABLE FOUNDATION CERTIFICATION PROGRAM

SIRIM QAS International Sdn. Bhd.

NZX Participant Compliance

Cooperation with other Certification Systems

CERTIFICATION CONDITIONS

ALGORITHMIC TRADING AND ORDER ROUTING SERVICES POLICY

EA-7/05 - EA Guidance on the Application of ISO/IEC 17021:2006 for Combined Audits

SCI QUAL INTERNATIONAL PTY LTD ENQUIRY & APPLICATION/RENEWAL FORM FOR CERTIFICATION

Code of Practice for the TL 9000 Certification Process. Release 8.0

Transcription:

Advisory Circular -AC-GEN003 October 2007 THE FIVE CERTIFICATION AND APPROVAL PROCESS 1.0 PURPOSE This Advisory Circular (AC) is issued to provide general inmation guidance on the Five Phase process applied in the certification approval organisations operators in compliance with the Tanzania Civil Aviation Regulations, 2006. 2.0 REFERENCE 2.1 Regulation 8(1) the Civil Aviation (Air Operator Administration) Regulation 2006 states that An Operator shall not engage in commercial air transport operation unless that operator holds a valid AOC issued by the Authority 2.2 Regulation 61(1) the Civil Aviation (Air Operator Administration) Regulations requires that an aircraft registered in the United Republic Tanzania shall not operate under an AOC unless it is maintained released to service by an AMO approved in accordance with the Civil Aviation (Approved Maintenance Organization) Regulations. 2.3 A person, other than-an air operators certificate or approved maintenance organisation certificate holder shall not operate an Aviation Training Organisation without or in violation, an Approved Training Organisation (ATO) certificate training specifications. [Ref: the Civil Aviation (Approved Training Organisations) Regulations, Part III]. 3.0 THE CERTIFICATION AND APPROVAL PROCESS 3.1 The following certification approval process provides a continuous interaction, from the s initial enquiry to the issue or denial the requested certificate/approval by the Tanzania Civil Aviation Authority. It ensures that the s proposed programmes, systems, arrangements, facilities, documentation, personnel intended methods compliance are thoroughly reviewed, evaluated tested. 3.2 There are five phases in the process air operator organisation certification CAA-AC-GEN003 October 2007 Page 1 8

approval respectively. Each phase is described in sufficient detail to provide a general understing the entire process. (See Appendix a detailed flow chart the entire certification or approval process). During certification, the process is followed in sequence in the order indicated below. In order to move to the next phase the preceding phase must be completed successfully. 1 PRE- APPLICATION 2 APPLICATION 3 DOCUMENT EVALUATION 4 DEMONSTRATION AND INSPECTION 5 CERTIFICATION 4.0 PRE-APPLICATION Prospective Applicant/Operator Pre-assessment Statement (PAPS/POPS) 4.1 The PAPS/POPS will be used to evaluate the complexity the proposed operation. This allows the establishment the certification team based on the complexity the certification. The assigned team leader (TL) will be designated as the principal spokesperson the Authority during the certification process. 4.2 An should conduct a thorough review the Tanzania Civil Aviation Regulations, 2006 other applicable regulations advisory material to gain meaningful insight into personnel, facility, equipment documentation requirements. As a result this review, the must address, in the PAPS/POPS, how these requirements will be met. NOTE: Submission the PAPS/POPS by the indicates intent to initiate the certification process. Pre-application Meeting 4.3 During this, the requirements which need to be attached to the mal application will be discussed which should include the following: a) Documentation Manuals: The should indicate all the documentations manuals to be used in compliance with the relevant regulations requirements the applicable operations. The manuals should allow the user to underst its content without further explanation must not contradict any regulatory requirements; (b) Compliance Statement: The compliance statement will ensure that all applicable regulatory requirements are addressed during the certification process. This is done by listing each applicable Tanzania Civil Aviation Regulations, 2006 section, in numerical sequence. After each listed regulation, there must be a brief narrative or specific reference to a manual/document that describes how the will comply with that regulation. The letter compliance must be reviewed to ensure that the has a clear understing the regulation that the proposed method compliance meets the intent the regulation. Personnel Requirements 4.4 Personnel requirements will include among others; a) Key personnel b) Their qualifications CAA-AC-GEN003 October 2007 Page 2 8

c) Training requirements d) Human factor human permance issues appropriate to the function that person in the organisation etc 5.0 FORMAL APPLICATION To begin the Formal Application Phase the team will receive the application attachments. As a rule, the team will meet with the after receiving the mal application package. All questions about the proposed operation, the mal application attachments should be resolved at this time. The should consist the certification team members all key management personnel from the s organization. 6.0 DOCUMENT COMPLIANCE In this phase, the s manuals other related documents attachments are carefully thoroughly reviewed either approved, accepted or rejected. This review ensures both conmity to the applicable regulations safe operating practices. The certification team members will conduct evaluation the submitted document/manuals in the fice. 7.0 DEMONSTRATION AND INSPECTION In this phase the certification team will conduct a thorough audit at the s premises to ensure that the s proposed procedures are effective that facilities equipment are in place meet regulatory requirements. The demonstration phase is carried out after satisfactory document compliance phase. 8.0 CERTIFICATION Once the meets the regulatory requirements the Tanzania Civil Aviation Regulations, 2006, the Authority will issue a certificate /or approval with the appropriate s specifications ratings. 9.0 CERTIFICATE VALIDITY Most the certificates issued have a 12 months validity period after initial certification or approval. The certificates approvals remain valid so long as the established stards at certification or approval are maintained complied with. By the Authority DIRECTOR GENERAL CAA-AC-GEN003 October 2007 Page 3 8

Appendix - Process Flow Chart. The flow charts on the following pages are representative the Air Operator Certificate (AOC), Approved Maintenance Organization (AMO) Aviation Training Organisation (ATO) Process. PRE-APPLICATION AOC, AMO ATO CERTIFICATION PROCESS PRE-APPLICATION MEETING Verify inmation on on POPS. Advise on on appropriate section TCARs Start Start Initial Initial inquiry inquiry or or request request about about Prospective Prospective obtains obtains TCARs TCARs Advisory Advisory Materials. Materials. Provides Provides POPS POPS Form Form to to prospective prospective receives receives reviews POPS acceptance reviews POPS acceptance completeness completeness (M-FSS Assigns a (M-FSS Assigns a Team) Team) Resubmitted? Acceptance Inm reasons reasons non acceptance. non acceptance. (letter) TL schedules conducts TL schedules conducts pre-application pre-application with with Ensure understs minimum requirements Formal Application (Emphasize initial compliance statement). Provide with certification inmation package & provide overview the the certification process. Advise to to submit Formal Application with required attachments as required attachments as far in advance far in advance intended operations as intended operations as possible. Corrective action taken? Team Team evaluates evaluates results the results the Inm, in in writing, reasons not not proceeding with certification? A Return POPS to to CAA-AC-GEN003 October 2007 Page 4 8

A A Appendix - Process Flow Chart. FORMAL APPLICATION AOC, AMO ATO CERTIFICATION PROCESS Applicant Applicant submits Formal Application with submits Formal Application with required required attachments attachments to to Office. Office. Team perms cursory review Team perms cursory review Formal Formal submissions. submissions. Manuals, Manuals, Qualifications, Qualifications, Compliance Compliance Statement, Statement, Etc., Etc., Evaluates Evaluates Resources Resources TL TL schedules schedules conducts conducts Formal Formal Application Application Resubmitted with corrections? Return Return application. application. Inm Inm reasons reasons nonacceptance. nonacceptance. tify tify FORMAL APPLICATION MEETING Review Review with with all all submissions. submissions. Resolve Resolve all all resource resource problem problem areas. areas. Resolve Resolve discrepancies discrepancies open open questions. questions. Review the thcoming Review the thcoming certification certification process process in in detail detail Discuss Discuss impact impact not not the the schedule schedule events. events. Corrective action taken? tify tify Return Return application. application. Inm Inm reasons reasons nonacceptance. nonacceptance. B CAA-AC-GEN003 October 2007 Page 5 8

Appendix - Process Flow Chart. DOCUMENT COMPLIANCE AOC, AMO ATO CERTIFICATION PROCESS Team Team reviews reviews Formal Formal Application, Application, Required Required Manuals, Manuals, s s documents documents B Letter Letter Compliance, Compliance, Training Training & compliance compliance C Qualifications, Qualifications, Lease/Contract Lease/Contract acceptance/approval acceptance/approval agreements, agreements, Etc., Etc., Corrective action taken? Return unsatisfactory documents, Inm reasons non-acceptance. tify tify CAA-AC-GEN003 October 2007 Page 6 8

C Appendix 1 - Process Flow Chart. INSPECTION AOC, AMO ATO CERTIFICATION PROCESS DEMONSTRATION AND INSPECTION EVALUATED IN THE FIELD Team Team evaluates evaluates 's 's demonstration compliance compliance Evaluate Evaluate Management Effectiveness, Inspect Inspect Station(s) Station(s) Facilities/Housing, Evaluate Evaluate Training, Training, Flight Flight Operations, Operations, Maintenance, Records, Records, etc., etc., Corrective action taken? tify tify Inm reasons reasons non-acceptance. non-acceptance. D CAA-AC-GEN003 October 2007 Page 7 8

Appendix - Process Flow Chart. CERTIFICATION AOC, AMO ATO CERTIFICATION PROCESS FINAL CERTIFICATION ACTIONS D Prepare Prepare Approve Approve Certificate Certificate Specific Specific Operating Operating Provision, Provision, Coordinate Coordinate with with Issue Certificate Operations Specifications Complete Distribute other internal Reports. Establish Surveillance File CAA-AC-GEN003 October 2007 Page 8 8