www.greenelectricalsupply.com

Description The medium trapezoidal cutoff wall pack offers a sleek design and cutoff performance with a wide range of uses. It delivers the lighting needed for the exteriors of retail buildings, businesses, walkways, underpasses or door entrances. Features Heavy duty two piece, die-cast aluminium housing. Silicone gasketing provides protection against moisture. Mounts directly to.5 octagon, or square outlet box..5 NPS tapped holes provided in three locations for surface conduit entry for optional photocell control. Dar ron e powder coated finish for impact, corrosion and resistance. Integral cast-in aluminum hinges. Clear tempered glass lens is thermal and shock resistant. La eled L listed for wet locations. Can be used as an uplight for wall washing applications. Dark Sky Friendly. Driver is fully accessible from below the ceiling or wall. Driver is wired for dimming or non-dimming. Ordering Information: Example: (-0-0-UNV-WH-PC) Dimensions Stock configurations are offered for shorter lead times: 00050BZSP Series Wattage/Lumen Color Temp. Voltage Optics Finish Option Medium Trapezoidal Cutoff Wall Pack tandard for fi ture Contact factory for custom finish Delivered Lumens (5000K) Standard Color Temp. 5 With Optics 6 DLC Listed 7 ft mounting heignt lens standard. Contact factory for higher mounting. 0 0 0* 60 80 W,6 W,5,6 0W/600,6 60W/66,5,6 W,5 0 5 0 50 000K 500K 000K 5000K,5,6 UNV 7 80 (Step-Down Transformer used for Divider) T T Type Type BZ BL WH CU Bronze Black White Custom PC WSF WDF EMB MS ED Photocell Wired Single Fuse Wired Double Fuse Intergal Emergency Backup Motion Sensor w/dimming 7 Electronic Drivers elect Watt model, factory set at listed wattage when shipped. lease contact factory for information on selecta le wattages for this fi ture.

Photometric Data 0W-TYPE II 1 0 1 0W-TYPE III 1 0 1 1 0-1 - - - 1 0-1 - - - LEGEND 0.1 fc 0.5 fc 1.0 fc Performance Data CRI: CCT: 000K, 500K, 000K, 5000K Warranty: yr. Limited Warranty Dimming: vaila le with inputs dimming down to Operating Temperature: -0 to 65 C Max Ambient L70 Rating:, ours IP Rating: IP65 Driver Current: 50mA (w/o Optics) 700mA (w/optics) BUG Rating: 0W-Type II 0W-Type III W ype 0W-Type II 0W-Type III W ype Delivered Light Output and Equivalency Chart HID to LED Replacement DELIVERED LUMENS HID LED Replacement 100lm 50W 10W 600lm 70W 0W 900lm 100W 0W 500lm 150W 0W 7800lm 175W 60W 11700lm 50W 80W 15600lm 00W 10W 6000lm 750W 00W 100lm 1000W 0W Interested in upgrading from HID to LED lighting? Use the conversion table below to get a general idea of what wattage LED fixture will replace your current lighting system. Lumen output and overall performance will vary by fixture, so please contact our factory or your nearest sales rep regarding specific questions on what wattage will best suit your desired space and application.

Performace Data Projected LED Lumen Maintenance To calculate LLF, use the lumen maintenance factor that corresponds to the desired number of operating hours below. For other lumen maintenance values, contact factory. Operating Hours 0, 0,000 5,000 5,000 50,000 60,000 75,000, LM Factor.. 70. 60. 50. 0... 6 Electrical Load Drive Current (ma) 700 System Watts Current (A) 10 08 0 77 7 80 0W 0. 0.1 0.1 0.1- - 0W 1 ---- 0.09 0.07 Lumen vs Ambient Temperature se these factors to determine relative lumen output for average am ient temperatures from C. Ambient ºC Ambient ºF Lumen Multiplier 0º º. 50º. 0º. 5º 77º. 0º. 0. 0W 0. 0.7 0. 0.0 -- 700 60W 1 ---- 0.17 0.1 Higher wattage is due to electrical losses from step-down transformer. Emergency Battery Operation The emergency battery backup (EMB option) is integral to the luminaire - no external housing required! This design provides reliable emergency operation while maintaining the aesthetics of the product. he emergency attery will power the luminaire for a minimum duration of minutes (maximum duration of three hours) from the time supply power is lost, per nternational uilding Code ection and Life afety Code ection., provided luminaires are mounted at an appropriate height and illuminate an open space with no major obstructions. he e amples elow show illuminance of fc average and. fc minimum of the single engine ype product in emergency mode. 8 MH1 MH

Motion Sensor with Dimming FSP-11 he mounts in an outdoor lighting fi ture and provides multi level control ased on motion. he sensor also includes a photocell to measure the am ient light level. t controls DC L D drivers or dimming ballasts, as well as non-dimming ballasts and, with an SFP-LX Lens, in rated for wet and cold locations. ll control parameters are ad usta le via a wireless configuration tool capa le of storing and transmitting sensor profiles. Key Factors ully ad usta le high and low dimmed light levels. Designed for L D fi tures rated for e treme temperatures and up to, on off cycles old off setpoint with automatic cali ration option for convenience and added energy savings d usta le via handheld wireless configuration tool rated with choice of lenses for wet and outdoor locations, and mounting heights from to d usta le time delay and cut off delay Coverage & Dimensions he L lenses wor with motion sensors to provide multi level lighting control ased on motion and the am ient light level. our lens choices provide e i ility for varying mounting heights. FSP-L. 59.mm FSP-L 7. 81.mm 1 1 60 ft 1 6 6 1 6 8' ' 11' ' ' 7' 7' 11' ' 10 '1 lens, ma imum coverage diameter from height 0.78 19.7mm 1 6 6 1 7 7 1 6 6 1 7 lens, ma imum coverage diameter from height 0.9.6mm FSP-L FSP-L7. 81.mm. 59.mm 5 5 5' 10 15 7' 5' 18 15 1 9 6 6 9 1 15 18 1 lens, ma imum coverage diameter from height 0.78 19.7mm 5 5 ' ' 1 1 0 0 5 5 5' 5' 5 lens, ma imum coverage diameter from height 1.0 6.mm