GET PROFESSIONAL, NOW!

NEUE PRODUKTE GET PROFESSIONAL, NOW! 3812-0576 ALLE WERKZEUG-SETS: 3812-0577 WE SUPPORT THE SPORT

ALL CATEGORIES COMBINATION SPANNER DIN 3113 form A/ISO 7738 form A 5,5 mm 3812-0277 6 mm 3812-0278 7 mm 3812-0279 8 mm 3812-0280 9 mm 3812-0281 10 mm 3812-0282 11 mm 3812-0283 12 mm 3812-0284 13 mm 3812-0285 14 mm 3812-0286 15 mm 3812-0287 (CONT) 16 mm 3812-0288 17 mm 3812-0289 18 mm 3812-0290 19 mm 3812-0291 20 mm 3812-0292 21 mm 3812-0293 22 mm 3812-0294 24 mm 3812-0295 27 mm 3812-0296 30 mm 3812-0297 1/4" 3812-0306 5/16" 3812-0298 3/8" 3812-0299 7/16" 3812-0300 1/2" 3812-0301 9/16" 3812-0302 5/8" 3812-0303 11/16" 3812-0304 3/4" 3812-0305 1/8 DOUBLE ENDED RING SPANNER StahlwilleSTABIL offset DIN 838/ISO 10104 (metric sizes) 8 x 10 mm 3812-0309 10 x 11 mm 3812-0310 10 x 13 mm 3812-0311 12 x 13 mm 3812-0312 14 x 15 mm 3812-0313 16 x 17 mm 3812-0314 18 x 21 mm 3812-0315 22 x 24 mm 3812-0316 24 x 27 mm 3812-0317 27 x 30 mm 3812-0318 SET COMBINATION SPANNERS Standard packing: Roll-up wallet made of extremely tough textile with Velcro fastener Imperial Content: 7/16; 1/2; 9/16; 5/8; 11/16; 3/4; 13/16; 7/8 Metric Content mm : 9; 10; 11; 12; 13; 14; 17; 19; 22 Imperial 3812-0307 Metric 3812-0308 DOUBLE ENDED RING SPANNER TORX For external TORX Straight DOUBLE OPEN ENDED SPANNER DIN 3110 ISO 10102 (metric sizes) 6 x 7 mm 3812-0266 8 x 9 mm 3812-0267 10 x 11 mm 3812-0268 12 x 13 mm 3812-0269 14 x 15 mm 3812-0270 16 x 17 mm 3812-0271 18 x 19 mm 3812-0272 18 x 21 mm 3812-0273 20 x 22 mm 3812-0274 24 x 27 mm 3812-0275 30 x 32 mm 3812-0276 E6 x E8 3812-0319 E10 x E12 3812-0320 DOUBLE ENDED RING STARTER ISO 3318 10 x 13 mm 3812-0321

SOCKET 1/4" SOCKET 1/4" LONG VERSION Extra deep SOCKET 1/4" TORX For external TORX ALL CATEGORIES 4 mm 3812-0322 4,5 mm 3812-0323 5 mm 3812-0324 5,5 mm 3812-0325 6 mm 3812-0326 7 mm 3812-0327 8 mm 3812-0328 9 mm 3812-0329 10 mm 3812-0330 11 mm 3812-0331 12 mm 3812-0332 13 mm 3812-0333 5/32" 3812-0334 3/16" 3812-0335 7/32 3812-0336 1/4" 3812-0337 9/32" 3812-0338 5/16" 3812-0339 11/32" 3812-0340 3/8" 3812-0341 7/16" 3812-0342 1/2" 3812-0343 8 mm 3812-0344 9 mm 3812-0345 10 mm 3812-0346 11 mm 3812-0347 12 mm 3812-0348 13 mm 3812-0349 14 mm 3812-0350 1/4" 3812-0351 5/16" 3812-0352 3/8" 3812-0353 7/16" 3812-0354 1/2" 3812-0355 UNIVERSAL JOINT 1/4" 54 mm 3812-0382 E6 3812-0357 E7 3812-0358 E8 3812-0359 E10 3812-0360 SCREWDRIVER-SOCKET 1/4" BORE HOLE With hollow point For inside TORX (TORX TAMPER RESISTANT). T8 3812-0369 T9 3812-0370 T10 3812-0371 T15 3812-0372 T20 3812-0373 T25 3812-0374 T27 3812-0375 T30 3812-0376 T40 3812-0377 2/8 ADAPTOR - 1/4" - 3/8" 1/4" socket x 3/8" plug (6.3 x 10) 25 mm 3812-0383 SCREWDRIVER-SOCKET 1/4" INHEX For socket head. ADAPTOR - 1/4" - 1/2" 1/4" socket x 1/2" plug (6.3 x 10) 28 mm 3812-0384 DRIVE HANDLE 1/4" 150 mm 3812-0366 RATCHET + QUICK RELEASE Fine tooth 80 teeth With QuickRelease safety lock and 2-component handle For use in confined spaces Re-engages after movement of 4.5 Construction without prevents foreign object damage Registered design 1/4" 3812-0368 3/8" 3812-0449 1/2" 3812-0501 3 mm 3812-0361 4 mm 3812-0362 5 mm 3812-0363 6 mm 3812-0364 8 mm 3812-0365 CLIP-STRIP SOCKET 1/4" For socket retention With 9 or 10 retaining clips Supplied without sockets 1/4" 3812-0367 3/8" 3812-0448 UNIFLEX SOCKET 1/4" 10 mm 3812-0356 QUICKRELEASE EXTENSIONS 1/4" Patent 54 mm 3812-0379 102 mm 3812-0380 330 mm 3812-0381 SLIDING T-HANDLE 1/4" 116 mm 3812-0378

ALL CATEGORIES BIT-RATCHET Easy change of direction (anticlockwise, clockwise and fixed) by simply twisting the locking ring Ergonomically designed, non-slip 2-component handle for optimum force transmission Storage compartment for 6 bits in the handle; push button to open (Size 1) For BITS screwdriver inserts with external hex 1/4" DIN 3126/ISO 1173 Type C 6.3 1/4" sockets can be used with Adaptor No 3115/1 (external hex and square drive 1/4") Easy bit change thanks to internal hex. drive with magnet Knurled spin section for faster screw advance Heavy-duty mechanism with 48 teeth (7.5 working angle) 250 mm 3812-0386 95 mm 3812-0387 QUICK-RELEASE SET 1/4" 19PCS In sturdy, stackable ABS plastic case 19 pieces Content: 13 sockets with hexagon No 40: sizes 3.5; 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13 mm 1 ratchet No 415QR 2 extensions No 405QR/2 (54 mm) & No 405QR/6 (150 mm) 1 universal joint No 407QR 1 drive handle No 400QR 1 T-handle No 404QR Quick-Release Set 3812-0388 SOCKET SET 1/4" + INCH In sturdy & stackable ABS plastic case 33 pieces Content: 25 sockets with hexagon : No 40: sizes 3.2; 3.5; 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm No 40a: sizes 3/16; 7/32; 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16" 1 ratchet No 415 2 extensions No 405/2 (54 mm) & No 405/6 (150 mm) 1 extension flexible No 406 (152 mm) 1 universal joint No 407 1 drive handle No 400 1 flexible handle No 403 1 T-handle No 404 3/8 BIT HOLDER 1/4" Socket Hexagon 1/4" inside hexagon DIN 3126/ISO 1173 D 6.3. Internal hex drive with a collar-thrust spring Bits are easy to insert, lock securely in position and can be removed just as easily; even hex bits with a wide groove (Type E, DIN 3126/ISO 1173) Bit Holder 1/4" 3812-0385 SOCKET 3/8" 8 mm 3812-0390 9 mm 3812-0391 10 mm 3812-0392 11 mm 3812-0393 12 mm 3812-0394 13 mm 3812-0395 14 mm 3812-0396 15 mm 3812-0397 16 mm 3812-0398 17 mm 3812-0399 18 mm 3812-0400 19 mm 3812-0401 20 mm 3812-0402 1/2" 3812-0403 9/16" 3812-0404 19/32" 3812-0405 5/8" 3812-0406 11/16" 3812-0407 3/4" 3812-0408 13/16" 3812-0409 7/8" 3812-0410 SOCKET 3/8" LONG VERSION Extra deep SPARK PLUG SOCKET 9/16" 3812-0411 5/8" 3812-0412 11/16" 3812-0413 3/4" 3812-0414 14 mm 3812-0417 20,8-13/16 3812-0418 Socket Set 1/4" 3812-0389 Extra deep With rubber insert EXTENSION BAR 3/8" Swivel angle 15 each side Max. torque 80 Nm. UNIVERSAL JOINT 3/8" 76 mm 3812-0450. SLIDING T-HANDLE 3/8" 165 mm 3812-0451 76 mm 3812-0452 160 mm 3812-0453 16-5/8" 3812-0415 18-11/16" 3812-0416 46 mm 3812-0454 3812-0456 QUICKRELEASE EXTENSIONS 3/8" ADAPTOR 3/8" Patent Maximum torque 62 Nm 3812-0455 76 mm 3812-0455 160 mm 3812-0456

SCREWDIVER-SOCKET 3/8" For socket head DIN 7422 ALL CATEGORIES SOCKET SET 3/8" In sturdy, stackable ABS plastic case Content: 18 pieces Content: 12 sockets with hexagon No 456: sizes 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19 mm 1 socket with bi-hexagon, long, with rubber insert, No 4600: size 16 mm - 5/8" 1 ratchet No 435 2 extensions No 427/3 (76 mm) & No 427/10 (240 mm) 1 T-handle No 425 1 universal joint No 428 Socket Set 3/8" Metric 3812-0457 SOCKET SET 3/8" INCH in sturdy, stackable ABS plastic case Content: 17 pieces 11 sockets with bi-hexagon No 45a: sizes 1/4; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16; 5/8; 11/16; 3/4; 13/16" 1 socket with bi-hexagon, long, with rubber insert No 4600: size 16 mm - 5/8" 1 ratchet No 435 2 extensions No 427/3 (76 mm) & No 427/10 (240 mm) 1 T-handle No 425 1 universal joint No 428 Socket Set 3/8" Inch 3812-0458 1/4" 3812-0429 5/16" 3812-0430 3/8" 3812-0431 3 mm 3812-0432 4 mm 3812-0433 5 mm 3812-0434 6 mm 3812-0435 7 mm 3812-0436 8 mm 3812-0437 10 mm 3812-0438 SCREWDIVER-SOCKET 3/8" TORX For inside TORX 4/8 INHEX SOCKET 1/2" For hexagon socket head DIN 7422 6 mm 3812-0478 7 mm 3812-0479 8 mm 3812-0480 10 mm 3812-0481 12 mm 3812-0482 14 mm 3812-0483 17 mm 3812-0484 19 mm 3812-0485 SOCKET 1/2" DIN 3124/ISO 2725-1 ASME B 107.5M E DIN EN 3709 (test loads) 10 mm 3812-0460 11 mm 3812-0461 12 mm 3812-0462 13 mm 3812-0463 14 mm 3812-0464 15 mm 3812-0465 16 mm 3812-0466 17 mm 3812-0467 18 mm 3812-0468 19 mm 3812-0469 20 mm 3812-0470 21 mm 3812-0471 22 mm 3812-0472 24 mm 3812-0473 27 mm 3812-0474 30 mm 3812-0475 32 mm 3812-0476 34 mm 3812-0477 INHEX SOCKET 1/2" TORX For inside TORX T40 3812-0488 T45 3812-0489 T50 3812-0490 T55 3812-0491 T60 3812-0492 T70 3812-0493 INHEX SOCKET 1/2" LONG TORX For inside TORX Extra long T40 Long 3812-0494 T45 Long 3812-0495 T30 Long 3812-0497 T50 Long 3812-0498 T55 Long 3812-0499 T60 Long 3812-0500 INHEX SOCKET 1/2" LONG With ball point hexagon For hexagon socket head Swivel angle up to 25 each side Special lengths. 5 mm, 238 mm long 3812-0486 8 mm, 238 mm long 3812-0487 T9 3812-0439 T10 3812-0440 T15 3812-0441 T20 3812-0442 T25 3812-0443 T27 3812-0444 T30 3812-0445 T40 3812-0446 T45 3812-0447 UNIFLEX SOCKET 3/8" SAE AS 954-E (American sizes) 10 mm 3812-0419 11 mm 3812-0420 12 mm 3812-0421 13 mm 3812-0422 14 mm 3812-0423 15 mm 3812-0424 16 mm 3812-0425 17 mm 3812-0426 18 mm 3812-0427 19 mm 3812-0428 SOCKET 1/2" 1 3/16" Metric sizes: DIN 3124/ISO 2725-1, E DIN EN 3709, ASME B 107.5 M American sizes: ASME B 107.1 Fed. Spec. GGG-W-641, SAE AS 954-E (test loads) 1 3/16" 3812-0459

EXTENSION BAR 1/2" Swivel angle 15 each side Max. torque 200 Nm ALL CATEGORIES 75 mm 3812-0503 SLIDING T-HANDLE 1/2" 300 mm 3812-0502 QUICKRELEASE EXTENSIONS 1/2" Patent 130 mm 3812-0452 255 mm 3812-0453 SOCKET SET 1/2" + INCH In sturdy sheet steel case Content: 45 pieces 39 sockets with bi-hexagon 22 No 50: sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 23; 24; 25; 26; 27; 28; 30; 32; 34 mm No 50a: sizes 3/8; 7/16; 1/2; 9/16; 19/32; 5/8; 11/16; 3/4; 25/32; 13/16; 7/8; 15/16; 1; 1 1/16; 1 1/8; 1 3/16; 1 1/4" 1 ratchet No 512 3 extensions No 509/3 (75 mm), No 509/5 (130 mm) & No 509/10 (255 mm) 1 T-handle No 506 1 universal joint No 510 Socket Set 1/2" 3812-0509 1/2" QUICK-RELEASE SET In sturdy, stackable ABS plastic case Content 22 pieces 16 sockets with hexagon No 52: sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24; 27; 30; 32 mm 1 ratchet No 512QR N 3 extensions No 509QR/3 (75 mm), No 509QR/5 (130 mm) & No 509QR/10 (255 mm) 1 T-handle No 506QR N 1 universal joint No 510QR 1/2" Quick-Release Set 3812-0510 5/8 UNIVERSAL JOINT 1/2" 71 mm 3812-0506 RATCHET INSERT TOOL 9X12 QUICKRELEASE With QuickRelease safety lock Insert/shell tools for torque wrenches Output square drive Outside Square in accordance with DIN 3120 Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003. This limit must not be exceeded if larger torque wrenches and tool holders are used Caution! Modified settings on torque wrench RATCHET INSERT TOOL 14X18 3/4" Size: 40 Fine tooth 60 teeth 3/4" Ratchet Insert Tool 3812-0573 1/4" 3812-0544 1/2" 3812-0574 3/8" 3812-0587 3812-0507 ADAPTOR 1/2" Maximum torque 202 Nm 3/8" 3812-0507 3/4" 3812-0508 SOCKET 3/4" DIN 3124/ISO 2725-1 ASME B 107.5 M AS-drive and HPQ high performance steel up to size 38 3812-0508 46 mm 3812-0511 55 mm 3812-0512 INSERT TOOL TORQUE 9X12 8 mm 3812-0546 10 mm 3812-0547 13 mm 3812-0548 17 mm 3812-0549 19 mm 3812-0550 1/4" 3812-0551 5/16" 3812-0552 3/8" 3812-0553 1/2" 3812-0554 9/16" 3812-0555 3/4" 3812-0556 INSERT TOOL TORQUE 14X18 Caution! Modified settings on torque wrench sizes 27 mm; 1"; 1 1/8" 13 mm 3812-0557 17 mm 3812-0558 19 mm 3812-0559 22 mm 3812-0560 24 mm 3812-0594 27 mm 3812-0561 7/16" 3812-0562 1/2" 3812-0563 9/16" 3812-0564 5/8" 3812-0565 11/16" 3812-0566 3/4" 3812-0567 13/16" 3812-0568 7/8" 3812-0569 15/16" 3812-0570 1" 3812-0571 1 1/8" 3812-0572

RATCHET INSERT TOOL 9X12 735 Fine tooth 60 teeth RATCHET INSERT TOOL 14X18 735 Fine tooth 60 teeth RATCHET INSERT 14X18 QUICK RELEASE with QuickRelease safety lock ALL CATEGORIES 3/8" 3812-0516 1/2" 3812-0517 1/2" 3812-0518 1/2" 3812-0575 6/8 TORQUE WRENCH 1-20 NM 1/4" DIGITAL Electronic torque wrench with permanently installed fine-tooth ratchet Indicating Slim, compact shape for smaller torques from 1 Nm upwards Measuring units: Nm, c Nm, ft lb, in lb Measurements independent of the point of application of force Additional functions using SENSOMASTER 4 software (freely available after registration at www.stahlwille.de/sensomaster): adjustable joints evaluation of tightening operation by means of coloured LEDs, buzzer and vibration calibrating interval adjustable logging function Supplied with 3.6 V lithium battery, type 14500 With certificate Display deviation value ± 4% 1-20 Nm 1/4" Digital 3812-0545 PIN PUNCH OCTOGONAL DIN 6450 Chrome vanadium Lacquered silver 150 x 2,5 mm 3812-0526 150 x 3 mm 3812-0527 150 x 4 mm 3812-0528 150 x 5 mm 3812-0529 150 x 6 mm 3812-0530 150 x 8 mm 3812-0531 CENTRE PUNCH OCTOGONAL DIN 7250 Chrome vanadium Lacquered silver. 120 x 10 mm 3812-0523 CROSS-OUT CHISEL FLAT DIN 6451 Chrome vanadium steel Lacquered silver 150 mm long 3812-0522 COLD CHISELS FLAT DIN 6453 Chrome vanadium steel Lacquered silver 125 mm long 3812-0519 150 mm long 3812-0520 200 mm long 3812-0521 TORQUE WRENCH + CUT-OUT Click-type Mount for interchangeable insert tools 9 x 12 mm or 14 x 18 mm QuickRelease safety lock Rapid setting Dual stop signal Twin scales Nm/ft lb and Nm/in lb The measuring element is only under load while force is being applied, no need for manual reset to zero Can be applied for either clockwise or anticlockwise tightening by turning the inserts over Any force applied to the tool after the 'click' or applied in the opposite direction to the current function - e.g. forcible loosening of a jammed screw does not act on the trigger mechanism and cannot cause damage to it With certificate Display deviation value ± 4% 9x12, 6-50 Nm 3812-0513 14x18, 25-130 Nm 3812-0514 TORQUE WRENCH 721/30 1/2" CUT Standard MANOSKOP torque wrenches with permanently installed ratchet Click-type Rapid setting Dual stop signal Twin scales Nm/ft lb The measuring element is only under load while force is being applied, no need for manual reset to zero Any force applied to the tool after the 'click' or applied in the opposite direction to the current function e.g. forcible loosening of a jammed screw does not act on the trigger mechanism and cannot cause damage to it All the sensitive components are protected by the sturdy tubular steel housing Size 30 with push through square drive for anticlockwise torquing With certificate Display deviation value ± 4% 721/30 1/2", 60-300 Nm 3812-0515 TORQUE WRENCH 9X12 CUT-OUT Service MANOSKOP torque wrenches with mount for insert tools 9 x 12 mm Click-type Mount for interchangeable tools Rapid setting Dual stop signal The measuring element is only under load while force is being applied, no need for manual reset to zero Can be applied for either clockwise or anticlockwise tightening by turning the inserts over Any force applied to the tool after the 'click' or applied in the opposite direction to the current function e.g. forcible loosening of a jammed screw - does not act on the trigger mechanism and cannot cause damage to it With certificate Display deviation value ± 4% 9x12, 4-20 Nm 3812-0543

ALL CATEGORIES ADAPTOR 3/8" American sizes: SAE AS 954-E Gunmetal finish 7/16" 3812-0578 1/2" 3812-0579 9/16" 3812-0580 5/8" 3812-0581 RING INSERT TOOLS 9X12 High-Performance-Quality, gunmetal finish For assembling and dismantling aero-engines 7/16" 3812-0582 1/2" 3812-0583 9/16" 3812-0584 5/8" 3812-0585 SCRAPER FOR USE ON GLASS For removing residues of adhesive and stickers from vehicle glass Blade 40 mm wide 0.3 mm thick Interchangeable with cover Scraper 3812-0532 7/8 ENGINEERS HAMMER With ash handles DIN 1041 PLASTIC HAMMER The hollow head is partially filled with steel shot which adds to the weight Prevents recoil With interchangeable heads made of medium-hard polyurethane and with a hickory handle FLAT ENGINEERS SCRAPER Special steel Three Square Scraper 3812-0534 300 g 3812-0591 500 g 3812-0592 1500 g 3812-0593 25 mm 3812-0588 35 mm 3812-0589 40 mm 3812-0590 THREE SQUARE ENGINEERS SCRAPER Special steel Three Square Scraper 3812-0533 WORKSHOP VERNIER CALIPER As per DIN 862 Vernier readings 1/20 mm and 1/128" Stainless steel In plastic pouch UNIVERSAL TRIMMING KNIFE Blade adjustable by means of slider 150 mm / 6" 3812-0535 Spare blades can be stored inside the handle Blade changes without tools With hanging hole Ideally suited for cutting card, rubber, leather, wood etc Tool body made of cast zinc. 160 mm 3812-0541 MAGNETIC LIFTERS Miniature magnetic lifter with tiny head, very powerful Loss of adhesion above 80 C 270 g 3812-0539 500 g 3812-0540 WORKSHOP VERNIER CALIPER With metal housing cover and metal buttons With data output (mini USB) Mechanical system made of stainless, hardened steel With or without thumb wheel (included in delivery for customer to fit if required) Large LCD display with clear read-offs, figures 9 mm high Display accuracy 0.01 mm/0.0005" Measuring tips ground fine and lapped With depth gauge Unit of measure in mm or imperial, zeroing possible at any position Incl. 2 x 3 V batteries (type CR 2032) 150 mm / 6" digital 3812-0536 CLAW LIFTER With ergonomic handle 540 mm long 3812-0542 WIRE BRUSH Wood Steel wire diameter 0.35 mm 290 mm 3812-0537 BRASS WIRE BRUSH For use on light alloys 290 mm 3812-0538

ALL CATEGORIES TOOL TROLLEY 7 easily removable drawers mounted in full extension rails with bearing cage guidance Three-stage safety logic: Central locking with a cylinder lock and fold-down key Individual locks prevent inadvertent opening in transit Topple-proof It is not possible to pull out more than one drawer at a time Drawers can be identified with multiple stickers per drawer (sheet of stickers included in delivery) Stainless steel handle with reinforced connection to body Impact protection strips with wrap-around bumper Wear and scratch-resistant worktop and ribbed protective base strip in stainless steel Oil and acid resistant wheels with carpet protection to prevent ingress of dirt and fibres into bearings, with two parking brakes Paper-roll holder 5 Standard colour shades, drawers in two colours (silver with black full-width handle) Perforations from both sides for Hooks No 8031-8041, e.g. for larger tools Match tool set: 37120577 8/8 Tool Trolley 95VA/7A Anthrazit 3812-0576 3812-0576 TOOL SET IN TOOL-CONTROL 215 tools In TCS inlays (Tool Control Sytem) 2x1/3, 2x2/3 and 5x3/3 inlays for 7 drawers (95VA/7A - 38120576) Tool Set in Tool-Control 3812-0577