mm PITCH METRIC CONNECTORS FOR PCB CONNECTION FCN-86 /87 SERIES OVERVIEW Fujitsu s mm hard metric connector F-PACK-3 (FCN-86/87 series) are connectors for connecting boards developed to support high-speed transmission/high density packaging of communication equipment, conforms to IEC 917 (DIN 43355) and IEC 6176-4-11, and supports compact PCI. Product meets Bellcor 117. To support high-speed transmission, these connectors implement low inductance, low cross-talk, and matching characteristic impedance (5 ohms), exhibiting superb transmission characteristics. Connection with the PCB is solderless (press fit) for both the plug/socket side, making mounting cost effective. Insertion connections are completely unnecessary since a polarity key is supported. Plug contact has a four level sequence structure that makes connection/disconnection in an active state possible. Terminals have a five level pin length to support various applications. New customized connectors can be supported by freely combining the pin lengths of contacts and terminals. For shield plate products, which support high-speed transmission based on standard products, 5 row 55, 95, 11, 11 (with key) and 15 contact, plugs support 77, 133, 154 and 175 contacts. The shield plate corresponds to the respective number of contacts, and the standard is post attachment. Sockets can also be shipped with shields pre-attached. 8 row products are also in the series. Consult factory for your requirements. Fujitsu has developed a new high density power connector (5% denser) to improve operability. A double press fit, which can connect two printed boards with one connector, greatly contributes to improved mounting and decreasing cost. Consult factory for details. 1
FCN-86/ 87 Series SPECIFICATIONS Standard connector Specification Power connector Operating temperature range -55 C to +15 C -4 C to +85 C C urrent rating 1 A DC max. (75 C) 7A DC/contact max. (75 C) Voltage rating 5V AC r.m. s 56V DC C ontact resistance mohms max. (DC mv,1ma) mohms max. (DC mv, 1mA) I nsulation resistance 1, Mohms min. (1V DC) 1, Mohms min. (1V DC) Dielectric strength Insertion/Withdrawl life 75V AC for 1 minute 6V AC for 1 minute 15 times 5 times I nsertion force.75n/pin min. N/connector max. W ithdrawl force.15n/pin min. 1N/connector min. CHARACTERISTICS MATERIALS impedance Transmission speed Near end cross talk Material 5 ohms 3 4.3 % max. Insulator Conductor Plating Material Polyester resin (UL94V-) Copper alloy Press fit: Solder Press fit other: PAGOS Contact area: Gold (PAGOS) Lead / press fit area: Solder CONFIGURATION OF F&T MM H.M. CONNECTOR 1. Basic configuration of socket/plug There are five types of sockets: three basic types: type A (11 contacts), type B (15 contacts), and type C (55 contacts), and a 11 contact and 95 contact types. Many coding keys are in the series to prevent insertion errors.
FCN-86 / 87 Series TRANSMISSION CHARACTERISTICS The transmission characteristics were designed to an optimum level by repeating various transmission characteristics simulations when the structure was designed, so as to improve the transmission characteristics of this connector. The characteristic impedance and the measurement device of the connector are shown below. Measurement Point Measurement Result a b c At Start Fujitsu Components 1 3 5 1 ns d e Ground Not connected Measurement signal Frequency: Hz 1.75 GHz 58 35 175 Impedance ( Ω) 45.3 to 64. 48. to 56. 8 49. to 54. 6 49.3 to 5. 8 Near/Far end cross talk: % 1.96/1.14 1.49/.78 1.6/.51.71/.7 Other Supplier At Start Frequency: Hz 1 3 5 1 ns 1.75 GHz 58 35 175 Impedance ( Ω) 47.4 to 66. 1 48. to 56. 8 49.5 to 59. 47.7 to 53. 5 Near/Far end cross talk: %.4/1.41 1.57/.98 1.14/.67.78/.35 3.m Delay Time signal 1.m V/Div. in out Impedance.m 49.n 1.p S/Div 5.n PC board part PC board part PC board part 1.Measurement voltage: Vin = 5.V.Rise time: Tr = 1, 3, 5, 1ns 3.Measurement device: TDR measurement device CSA83 and SD4 (Tektronix) 4.Measurement system Coaxial cable for measurement Plug 5 Ωtermination connector CSA 8.3 SD 4 Socket Measurement board 3
FCN-86 / 87 Series Compact PCI / VME P1 TYPE A HOT SWAP 11 SIGNAL CONNECTOR STRAIGHT PLUG (154 POSITIONS) DIMENSIONS MOUNTING HOLE LAYOUT 8. +. 3.7 (.39 +.8 ) (.146) 9.7+. (.38 +.8 ) 3.7 (.146) Thickness: 1.4 to 5.6 mm (.55 to. in.) Drill hole Diameter: φ.7 ±.5 mm (.8 in.) Through hole diameter (after plating): φ.6 ±.5 mm (.4) 13.45 (.53) 11. +. (.44 +.8 ) (.47) (.79) 3.7 (.146) ±.5 (.47±.) ±.5 (.79±.) x(11-1)=±.5 (.787±.) ±.5 (.79±.) 8±.5 (.315±.) 4±.5 (.157±.) x(11-1)=±.5 (.787±.) 154 - Ø.6±.5 (.4±.) (.79) x(11-1)= (.787) 4 (.945) 48 (1.89) x(11-1)= (.787) (.79) (.47) 3 -.1 (.118 ) -.4 Ø(.79.4) Ø +.1 ORDERING PART NUMBER: FCN-86P154-G/114-BCR P4 TYPE A MALE FEED THROUGH STRAIGHT PLUG (154 POSITIONS) DIMENSIONS 8. +. (.39 +.8 ) 11. +. (.44 +.8 ) 16 (.63) 16 (.63) MOUNTING HOLE LAYOUT Thickness: 1.4 to 5.6 mm (.55 to. in.) Drill hole Diameter: φ.7 ±.5 mm (.8 in.) Through hole diameter (after plating): φ.6 ±.5 mm (.4) (.47) (.79) x(11-1)=±.5 (.787±.) ±.5 (.79±.) 8±.5 (.315±.) x(11-1)=±.5 (.787±.) 4±.5 (.157±.) 13.45 (.53) (.79) x(11-1)= (.787) 4 (.945) x(11-1)= (.787) (.79) (.47) 3 -.1 (.118 ) -.4 ±.5 (.47±.) ±.5 (.79±.) Ø(.79.4 ) Ø +.1 154 - Ø.6±.5 (.4±.) 48 (1.89) ORDERING PART NUMBER: FCN-86P154G/41-BCR 4
FCN-86 / 87 Series Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda -chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-71 Fax: (81-3) 5449-66 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 5 E. Caribbean Drive Sunnyvale, CA 9489 U.S.A. Tel: (1-48) 745-49 Fax: (1-48) 745-497 Email: marcom@fcai.fujitsu.com Web: www.fcai.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 5 13 WV Hoofddorp Netherlands Tel: (31-3) 55691 Fax: (31-3) 55695 Email: info@fceu.fujitsu.com Web: www.fceu.fujitsu.com Asia Pacific Fujitsu Components Asia Ltd. 1E Pasir Panjang Road #4-1 Citilink Warehouse Complex Singapore 11859 Tel: (65) 6375-856 Fax: (65) 673-31 Email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 6/ 5