Structural Engineering Training courses : Course BIM Structural Diploma Revit Structure Robot Structure Analysis Autocad Structure Detailing Navis Works
BIM Structural Diploma BIM structural diploma maximize the BIM workflow optimization and gives the engineer the full capabilities to perform Detailed structural layouts, structural design & structural shop drawings through a complete process depends on a revit based model used for modeling detailing and design.
BIM Structure Diploma ( Training course Course Levels Duration Out puts Revit Structure Two levels 40 hrs Structural models and sheets Robot Structure one level 28 hrs Structural analysis ) : 5% discount BIM Structure Diploma ( Training course Course Levels Duration Out puts Revit Structure Two levels 40 hrs Structural models and sheets Robot Structure one level 28 hrs Structural analysis Autodesk Navisworks one level 28 hrs Simulation & Clash detection ) : 10% discount BIM Structure Diploma ( Training course Course Levels Duration Out puts Revit Structure Two levels 40 hrs Structural models and sheets Robot Structure one level 28 hrs Structural analysis Autodesk Navisworks one level 28 hrs Simulation & Clash detection Autocad structural detailing one level 28 hrs Structural shop drawing ) : 15% discount
Revit Revit structure : Autodesk Revit software is the leading Building Information Modeling (BIM) solution for structural engineering firms that enables engineers and designers to integrate a multi-material physical model with an independently editable analytical model for structural analysis, design, and documentation. For structure engineers, drafters & students
Revit structure Training course 1. Revit STRUCTURE Essential course 2. Revit STRUCTURE Advanced course* * All the advanced trainings perquisite the trainee to have its essentials first. Training course : course Duration hrs Revit STRUCTURE Essential course 25 Revit STRUCTURE Advanced course 15 Training materials : Autodesk official training materials Prerequisites : There are no required prerequisites for the Essential course. All the advanced trainings perquisite the trainee to have its essentials first. Attendance : structure engineers & drafters.
1. Revit Structure Essential course CONTENT: Course Objectives : To take full advantage of Building Information Modeling, the Autodesk Revit Structure Fundamentals training course has been designed to teach the concepts and principles from building design through construction documentation using the Autodesk Revit Structure software. This training course is intended to introduce students to the user interface and the basic building components of the software that makes it a powerful and flexible structural modeling tool. The goal is to familiarize you with the tools necessary to create, modify, and document your parametric model. Course outline: The topics include the following: Introduction to the Autodesk Revit Structure software Basic Drawing and Editing Tools Setting up Levels and Grids Working with Views Starting a structural project based on a linked architectural model Adding structural Columns and Walls Adding Foundations and structural slabs Structural Reinforcement Beams and Framing Systems Project Practices to reinforce learning Construction Documents Annotating Construction Documents Detailing Scheduling
2. Autodesk Revit Structure Advanced Course Objectives : The Autodesk Revit Structure Advanced training introduces experienced users of the Autodesk Revit Structure software to more advanced techniques and concepts beyond what was learned in the Autodesk Revit Structure 2014 Fundamental training. It is intended to broaden your knowledge and maximize your use of the Autodesk Revit Structure software. This training offers detailed information and practical exercises regarding creating families (tapered columns, precast slabs, tapered moment frame, and trusses), preparing the Autodesk Revit software analytical model for analysis and project sharing. Course outline: 1. Concepts and Techniques for working with Families 2. Creating Structural Families 3. Creating Trusses 4. Working with Structural Settings 5. Setting Up Analytical Views 6. Creating and Placing Loads for Structural Analysis 7. Project Team Collaboration working with Worksets
Robot Structural Analysis Professional Robot Structural Analysis Professional Autodesk Robot Structural Analysis calculates a wide range of structural models. Using a comprehensive collection of design codes, results are delivered in minutes, not hours. Seamless workflow with 3D bidirectional links to Autodesk companion products; provide a scalable, country-specific analysis solution for many different types of structures. This includes; buildings, bridges, civil and specialty structures For structural engineers
Robot Structural Analysis Training course 1. Robot Structural Analysis Professional course Training course : course Duration hrs Robot Structural Analysis Professional course 28 Training materials : Autodesk official training materials Prerequisites : Completion of the Revit Structure course. Attendance : structure engineers.
1. Robot Structural Analysis Professional course content Course Objectives : Analysis calculates a wide range of structural models. Using a comprehensive collection of design codes, results are delivered in minutes, not hours. Seamless workflow with 3D bidirectional links to Autodesk companion products; provide a scalable, country-specific analysis solution for many different types of structures. This includes; buildings, bridges, civil and specialty structures. Course outline: General information about ARSA interface User interface System configuration (set of materials, code settings) Definition of bar structure 2D Frame Geometry definition Library structures Supports definition Bar releases Load definition Definition of loads & load cases Weather conditions (2D frame) Definition of manual/automatic combinations Results analysis Presentation of results as diagrams/tables Settings and modification of tables Alternative ways of results presentation Preparation of calculation report Screen captures Calculation report settings Modification of screen captures Updated upon printing and JPG Screen captures
Verification and design of steel profiles Calculation parameters Steel design group definition Steel profile optimisation RC beams design Beam importation vs Manual definition RC design parameters Drawings and their parameters RC column design Spread footing design Definition of RC slab geometry RC slab supports Definition of supports (Nodal, Linear and Planar) Slab loads Surface and linear loads
AutoCAD Structural Detailing course* Who should attend? Structural Engineers, detailers and fabricators Course Objectives AutoCAD Structural Detailing: This course will assist users in starting an ASD project, building a "working catalog" of structural shapes, creating their structure though both beam and member placement, as well as connections. Inaddtion, the creation of customized structural detail views, drawings, and BOM's. Course length is 2 days, and can be customized to better suit users needs and current working demands. Course outline Introduction to ASD Steel User Interface Work frames and wire modelling Integration with Revit Structure Profiles Connection macros Parametric Structures Plates, Drills, Bolts and Welds Machining Positioning Edition Editing
Autodesk Navisworks Manage and simulate (mechanical, electrical, structural, architecture )
1. Autodesk Navisworks Training course 1. Autodesk Navisworks training simulate course course Duration hrs Autodesk Navisworks training course 24 Notes : All instructors are professionaly experienced All the above prices are for the trainings located at engosoft. Prerequisites : Completion of the Revit Structure course. Attendance : (mechanical, electrical structural, architecture ) engineers & Drafters.
1. Autodesk Navisworks manage and simulate course Course Objectives : Describe the main features and functionality of Autodesk Navisworks. Open and append 3D files of different formats and save in the Autodesk Navisworks format. Create links to object properties files and scheduling files in external databases. Perform visual project model reviews using the built-in review and reporting tools. Create construction simulations of a project model to check the validity of construction schedules. Use Animator and Scripter to create interactive animations for presentations and demonstrations. Add true-to-life materials, and lighting and backgrounds to project models, to create photorealistic output. Perform interference detection tests between 3D files of different disciplines to check integrity of the design. Course outline: Getting Started Core Concepts Appending/Merging Files NavisWorks Interface Navigating The Model Animation Timeliner Simulation Core Concepts Clash Detective TimeLiner
Autodesk quantity takeoff : Autodesk Quantity Takeoff building cost estimating software helps make material costing faster, easier, and more accurate Cost estimators can create synchronized, comprehensive project views that combine important information from building information modeling (BIM) tools such as Revit Architecture, Revit Structure and Revit MEP software together with geometry, images, and data from other tools. Automatically or manually measure areas and count building components, export to Microsoft Excel, and publish to DWF format Autodesk - 3D Design & Engineering Software for Architecture, Manufacturing, and Entertainment. Prepare your B.O.Q as fast as you can For All engineering Fields
Autodesk quantity takeoff Training course course Duration hrs Autodesk quantity takeoff Training course 24 Prerequisites : There are no required prerequisites for this course. Attendance : For All engineering Fields.
Autodesk quantity takeoff course ( details ): Course Objectives : After completing this course, students will be able to complete a QTO project. During the course, students will learn the interface of QTO and how to: organize a project, create takeoff items, perform quantity takeoff from 2D and 3D files, work with sheets, export takeoff data and publish a project. Course outline: Getting Started Overview Using DWF and non-dwf files Interface Menus and toolbars Palettes Canvas Organizing a Project Importing documents Organizing takeoff groups and items Creating Takeoff Items Creating assemblies Performing Quantify Takeoffs Takeoff methods Specifying scales Takeoff tools (automatic and manual) Working with sheets Sheet scales