Date : Oct 25 th 2017 DJI Assistant 2 : v 1.1.7 Inspire2 Firmware : v 1.1.0010 MG-1S Firmware : v 1.3.2.0 N3 Firmware : v 1.7.1.5 N3-AG Firmware : v 1.0.2.0 A3 Firmware : v 1.7.1.5 A3-AG Firmware : v 1.0.2.0 Mavic Firmware : v 01.03.09.00 M100 Firmware : v 1.03.01.00 Phantom4 Pro Firmware : v 1.4.602 M600 Firmware : v 1.0.1.65 Phantom4 Firmware : v 2.0.106 M600 Pro Firmware : v 1.0.1.65 Osmo Mobile Firmware : v 1.6.0.80 Snail 430-R Firmware : v 1.0.0.3 D-RTK Firmware : v 1.0.0.21 Takyon Z14120 Firmware : v 1.12.2.7 Datalink Pro Firmware : v 1.0.0.14 Takyon Z415-M / Z425-M Firmware : v 1.5.0.3 Lightbridge 2 Firmware : v 1.1.60 Takyon Z420/318 Firmware : v 1.5.0.0 430-Lite ESC Firmware : v 1.0.0.3 E5000 Firmware : v 1.0.0.4 Ronin-MX-SRW-60G Firmware : v 1.00.00.01 M200 Firmware : v 1.01.0303 M210 Firmware : v 1.01.0303 M210 RTK Firmware : v 1.01.0303 Spark Firmware : v 01.00.0500 Phantom4 Advanced Firmware : v 1.0.128 MG-1S RTK Firmware : v 1.1.0.0 MG-1S DATALINK PRO Firmware v 1.1.0.0 MG-1S DATALINK 3 Firmware : v 1.1.0.0 MG-1S Base Station Firmware : v 1.1.0.0 MG-1S Handheld Device Firmware : v 1.1.0.0 Datalink3 Ground Firmware : v 1.2.0.0 Datalink3 Air Firmware : v 1.2.0.0 DJI Goggles Firmware : v 01.03.09.00 Ronin2 Firmware : v1.0.1.17 What s new: 1. Added D-RTK module firmware updating support for the M210 RTK. 2. Added DataLink Pro module firmware updating support for the M210 RTK. 3. Fixed bugs causing M600 or M600 PRO activation failure in some circumstances.
Date : Aug 31 st 2017 DJI Assistant 2 : v 1.1.6 Inspire2 Firmware : v 1.1.0010 MG-1S Firmware : v 1.3.2.0 N3 Firmware : v 1.7.1.5 N3-AG Firmware : v 1.0.2.0 A3 Firmware : v 1.7.1.5 A3-AG Firmware : v 1.0.2.0 Mavic Firmware : v 01.03.09.00 M100 Firmware : v 1.03.01.00 Phantom4 Pro Firmware : v 1.4.602 M600 Firmware : v 1.00.01.20 Phantom4 Firmware : v 2.0.106 M600 Pro Firmware : v 1.00.01.20 Osmo Mobile Firmware : v 1.6.0.80 Snail 430-R Firmware : v 1.0.0.3 D-RTK Firmware : v 1.0.0.21 Takyon Z14120 Firmware : v 1.12.2.7 Datalink Pro Firmware : v 01.00.00.12 Takyon Z415-M / Z425-M Firmware : v 1.5.0.3 Lightbridge 2 Firmware : v 1.1.60 Takyon Z420/318 Firmware : v 1.5.0.0 430-Lite ESC Firmware : v 1.0.0.3 E5000 Firmware : v 1.0.0.4 Ronin-MX-SRW-60G Firmware : v 1.00.00.01 M200 Firmware : v 1.00.0100 M210 Firmware : v 1.01.0200 M210 RTK Firmware : v 1.01.0200 Spark Firmware : v 01.00.0500 Phantom4 Advanced Firmware : v 1.0.128 MG-1S RTK Firmware : v 1.1.0.0 MG-1S DATALINK PRO Firmware : v 1.1.0.0 MG-1S DATALINK 3 Firmware : v 1.1.0.0 MG-1S Base Station Firmware : v 1.1.0.0 MG-1S Handheld Device Firmware : v 1.1.0.0 Datalink3 Ground Firmware : v 1.2.0.0 Datalink3 Air Firmware : v 1.2.0.0 DJI Goggles Firmware : v 01.03.09.00 Ronin2 Firmware : v1.0.1.17 What s new: Spark 1. Fixed bugs. 2. Optimized the Wi-Fi Settings page. 3. Fixed bugs on the Data Upload page. MG-1S Base Station and MG-1S Handheld Device 1. Added support for updating firmware. 2. Added new language options. MG-1S 1. Added info for both the Obstacle Avoidance Radar and Radar Gimbal. MG-1S RTK 1. Added RTK settings. 2. Added support for updating firmware. 3. Added support for uploading flight data. MG-1S DATALINK PRO 1. Added support for Run mode 2. Added support for updating firmware. MG-1S DATALINK 3 1. Added support for updating firmware. A3, N3
1. Added a DJI Disclaimer and DJI UAS Products Terms of Use when activating DJI devices. M600, M600 Pro 1. Added a DJI Disclaimer and DJI UAS Products Terms of Use when activating. 2. Optimized the Basic Settings > Installation page. 3. Optimized the DJI Device > D-RTK page. 4. Added Playback and Record mapping options to the Tools > Function Channel page. M100 1. Added support for uploading flight data. Ronin2 1. Added support for updating firmware. 2. Added support for configuring gimbal motors. General 1. Optimized the firmware update page. 2. Optimized the Data Upload page. 3 Fixed bugs causing crashes when uploading or exporting data. 4. Fixed bugs causing crashes when exporting data during black box data transmission. 5. Added an FAQ on the Calibration page. 6. Added a Select All feature for exporting flight data. 7. Optimized the Restore > Backup page. 8. Added privacy policies.
Date : Jun 16 th, 2017 DJI Assistant 2 : v 1.1.2 / v 1.1.2-2 Inspire2 Firmware : v 1.0.0330 MG-1S Firmware : v 1.3.0.0 N3 Firmware : v 1.7.1.5 N3-AG Firmware : v 1.0.0.90 A3 Firmware : v 1.7.1.5 A3-AG Firmware : v 1.0.0.90 Mavic Firmware : v 01.03.0500 M100 Firmware : v 1.3.1.00 Phantom4 Pro Firmware : v 1.3.417 M600 Firmware : v 1.0.1.20 Phantom4 Firmware : v 1.2.503 M600 Pro Firmware : v 1.0.1.20 Osmo Mobile Firmware : v 1.1.0.30 Snail 430-R Firmware : v 1.0.0.3 D-RTK Firmware : v 1.0.0.21 Takyon Z14120 Firmware : v 1.10.2.6 Datalink Pro Firmware : v 1.0.0.12 Takyon Z415-M / Z425-M Firmware : v 1.5.0.0 Lightbridge 2 Firmware : v 1.1.30 Takyon Z420/318 Firmware : v 1.4.0.0 430-Lite ESC Firmware : v 1.0.0.3 E5000 Firmware : v 1.0.0.3 Ronin-MX-SRW-60G Firmware : v 1.0.0.1 M200 Firmware : v 01.00.0000 M210 Firmware : v 01.00.0000 M210 RTK Firmware : v 01.00.0000 Spark Firmware : v 1.00.00.06 Spark Remote Controller Firmware : v 00.00.01.31 What s new: Spark 1. Added support for updating firmware. 2. Added support for uploading flight data. 3. Added the black box data transmission feature. 4. Added Flight Simulator support. 5. Added Wi-Fi settings. Inspire 2 1. Added the black box data transmission feature. A3, N3 1. Fixed a System Typology UI bug. 2. Optimized functions in Function Channel. 3. Optimized battery simulation in the Simulator. 4. Fixed bugs in Basic Settings > Remote Controller. 5. Added an E5000 ESC setting in DJI Device. A3_AG & N3_AG 1. Added a Direct Channel option in Basic Settings > Remote Controller. 2. Added an E5000 ESC setting in DJI Device. M200, M210, M210-RTK 1. Added to support for exporting ADS-B LOGs.
E5000 1. Added setting adjustment support. M600, M600 Pro 1. Updated the D-RTK help page under DJI Device. General 1. Optimized the display of device names
Date : April 25 th, 2017 DJI Assistant 2 : v 1.1.1 Inspire2 Firmware : v 1.0.330 MG-1S Firmware : v 1.2.0.0 N3 Firmware : v 1.7.0.0 N3-AG Firmware : v 1.0.0.90 A3 Firmware : v 1.7.0.0 A3-AG Firmware : v 1.0.0.90 Mavic Firmware : v 01.03.0500 M100 Firmware : v 1.3.1.00 Phantom4 Pro Firmware : v 1.3.509 M600 Firmware : v 1.0.0.80 Phantom4 Firmware : v 1.2.602 M600 Pro Firmware : v 1.0.0.80 Osmo Mobile Firmware : v 1.1.0.30 Snail 430-R Firmware : v 1.0.0.3 D-RTK Firmware : v 1.0.0.21 Takyon Z14120 Firmware : v 1.12.2.7 Datalink Pro Firmware : v 1.0.0.12 Takyon Z415-M / Z425-M Firmware : v 1.5.0.0 Lightbridge 2Firmware : v 1.1.30 Takyon Z420/318 Firmware : v 1.4.0.0 DataLink3 Firmware : v 1.1.0.0 E5000 Firmware : v 1.0.0.3 Ronin-MX - SRW-60G Firmware v 1.0.0.1 430-Lite ESC Firmware : v 1.0.0.3 What s new: P4A 1. Added support for updating firmware. 2. Added support for uploading flight data. 3. Added support for viewing flight data. 4. Added vision system calibration. 5. Added Flight Simulator support. DataLink3 1. Added support for updating firmware. M200,M210,M210-RTK 1. Added support for updating firmware. 2. Added support for uploading flight data. 3. Added support for viewing flight data. 4. Added vision system calibration. 5. Added SDK support. (Only for the M210 and M210-RTK) DJI Goggles 1. Added support for uploading data. Esc Snail 1. Fixed UI bugs A3/N3 1. Added support for ESC Hot Plug on the firmware update interface. 2. Fixed UI bugs 3. Added DataLink3 Remote Controller support. 4. Added a warning that tells users to remove propellers before updating. 5. Added an option that allows the motors to start one by one. 6. Added an option to prevent the Combination Stick Command from stopping the motors.
7. Added a control performance slider. DJI Assistant 2 Release Notes A3_AG & N3_AG 1. Fixed bugs that displayed incorrect remote controller modes. 2. Fixed an issue where altitude and distance limit switches displayed inconsistently. MG-1S 1. Added the Whitelist Unlock feature under the Tool menu. General 1. Added a verification code when signing into an account.
Date : March 27 th, 2017 DJI Assistant 2 : v 1.1.0-2 Inspire2 Firmware : v 1.0.240 MG-1S Firmware : v 1.1.0.0 N3 Firmware : v 1.7.0.0 N3-AG Firmware : v 1.0.0.90 A3 Firmware : v 1.7.0.0 A3-AG Firmware : v 1.0.0.90 Mavic Firmware : v 01.03.0500 M100 Firmware : v 1.3.1.00 Phantom4 Pro Firmware : v 1.3.417 M600 Firmware : v 1.0.0.80 Phantom4 Firmware : v 1.2.503 M600 Pro Firmware : v 1.0.0.80 Osmo Mobile Firmware : v 1.1.0.30 Snail 430-R Firmware : v 1.0.0.3 D-RTK Firmware : v 1.0.0.21 Takyon Z14120 Firmware : v 1.10.2.6 Datalink Pro Firmware : v 1.0.0.12 Takyon Z415-M / Z425-M Firmware : v 1.5.0.0 Lightbridge 2 Firmware : v 1.1.30 Takyon Z420/318 Firmware : v 1.4.0.0 430-Lite ESC Firmware : v 1.0.0.3 E5000 Firmware : v 1.0.0.3 Ronin-MX - SRW-60G Firmware V1.0.0.1 What s new: Ronin-MX - SRW-60G Added support for firmware updates A3_AGR, N3_AGR Added support for ESC updates General Fixed bugs causing driver installation failure in Version 1.1.0
Date : March 2 nd, 2017 DJI Assistant 2 : v 1.1.0 Inspire2 Firmware Version : v 1.0.240 MG-1S Firmware Version : v 1.1.0.0 N3 Firmware Version : v 1.7.0.0 N3-AG Firmware Version : v 1.0.0.83 A3 Firmware Version : v 1.7.0.0 A3-AG Firmware Version : v 1.0.0.83 Mavic Pro Firmware Version : v 01.03.0500 M100 Firmware Version : v 1.3.1.00 Phantom4 Pro Firmware Version : v 1.3.417 M600 Firmware Version : v 1.0.0.80 Phantom4 Firmware Version : v 1.2.503 M600 Pro Firmware Version : v 1.0.0.80 Osmo Mobile Firmware Version : v 1.1.0.30 Snail 430-R Firmware Version : v 1.0.0.3 D-RTK Firmware Version : v 1.0.0.21 Takyon Z14120 Firmware Version : v 1.10.2.6 Datalink Pro Firmware Version : v 1.0.0.12 Takyon Z415-M/Z425-M Firmware Version : v 1.5.0.0 Lightbridge 2 Firmware Version : v 1.1.30 Takyon Z420/318 Firmware Version : v 1.4.0.0 430-Lite ESC Firmware Version : v 1.0.0.3 E5000 Firmware Version : v 1.0.0.1 What's new: MG-1S 1. Deleted in Basic Settings > Remote Controller > EXP: Max Ascent Speed, Max Attitude Angle, Max Yaw Angle Velocity, Max Descent Speed 2. Fixed in Flight Settings > Battery: Bug in Low Battery Warning Settings Inspire 2 1. Optimized user experience support A3, N3 1. Fixed in DJI Device > ESC Settings: Bugs causing ECS type identification error 2. Added in Simulator: Battery Simulation General 1. Added update function in Polygon No-fly Zone database for Phantom 4, Phantom 4 Pro, Mavic Pro, and Inspire 2
Date : Jan 18 th, 2017 DJI Assistant 2 : v 1.0.9-2 Inspire2 Firmware : v 1.0.0135 MG-1S Firmware : v 1.0.0.20 N3 Firmware : v 1.7.0.0 N3-AG Firmware : v 1.0.0.83 A3 Firmware : v 1.7.0.0 A3-AG Firmware : v 1.0.0.83 Mavic Firmware : v 1.3.2.0 M100 Firmware : v 1.3.1.00 Phantom4 Pro Firmware : v 1.01.201 M600 Firmware : v 1.0.0.80 Phantom4 Firmware : v 1.2.503 M600 Pro Firmware : v 1.0.0.80 Osmo Mobile Firmware v 1.1.0.30 Snail 430-R Firmware v 1.0.0.3 D-RTK Firmware : v 1.0.0.19 Takyon Z14120 Firmware : v 1.10.2.6 Datalink Pro Firmware : v 1.0.0.12 Takyon Z415-M / Z425-M Firmware : v 1.5.0.0 Lightbridge 2 Firmware : v 1.1.30 Takyon Z420/318 Firmware : v 1.4.0.0 D-RTK GNSS Firmware : v 1.0.0.21 E5000 Firmware v 1.0.0.1 What's new A3, N3 1. Added support for version matching between DJI Assistant 2 and flight control system. 2. Optimized the DJI Assistant 2 backup and recovery functionality.
Date : Jan 5 th, 2017 DJI Assistant 2 : v 1.0.9 Inspire2 Firmware : v 1.0.0135 MG-1S Firmware : v 1.0.0.20 N3 Firmware : v 1.1.1.00 N3-AG Firmware : v 1.0.0.83 A3 Firmware : v 1.6.0.10 A3-AG Firmware : v 1.0.0.83 Mavic Firmware : v 1.3.2.0 M100 Firmware : v 1.3.1.00 Phantom4 Pro Firmware : v 1.01.201 M600 Firmware : v 1.0.0.80 Phantom4 Firmware : v 1.2.503 M600 Pro Firmware : v 1.0.0.80 Osmo Mobile Firmware v 1.1.0.30 Snail 430-R Firmware v 1.0.0.3 D-RTK Firmware : v 1.0.0.19 Takyon Z14120 Firmware : v 1.10.2.6 Datalink Pro Firmware : v 1.0.0.12 Takyon Z415-M / Z425-M Firmware : v 1.5.0.0 Lightbridge 2 Firmware : v 1.1.30 Takyon Z420/318 Firmware : v 1.4.0.0 D-RTK GNSS Firmware : v 1.0.0.21 E5000 Firmware v 1.0.0.1 What's new MG-1S, A3-AG, and N3-AG 1. Added support for Overview. 2. Added support for Basic Settings: Aircraft frame (only for A3-AG and N3-AG), installation (only for A3-AG and N3- AG), remote controller, and ESC settings. 3. Added support for Flight Settings: Propulsion Allocation, Sensitivity, Safety Settings, Battery, Intelligent Navigation (only for A3-AG and N3-AG), and Agricultural Application (only for A3-AG and N3-AG). 4. Added support for Tools: System Topology, Flight Record, Function Channel (only for A3-AG and N3-AG), Backup, Spray (only for A3-AG and N3-AG), and Shutter (only for A3-AG and N3-AG). 5. Added support for DJI Devices D-RTK 6. Added support for Simulator 7. Added support for SDK functions (only for A3-AG and N3-AG) 8. Added support for firmware updates 9. Added support for the display of Radar information (only for MG-1S) A3 1. More intuitive Sensitivity and Propulsion Allocation settings 2. Updated help section 3. Added Polyhedron IMU calibration option 4. Added DataViewer for Mac 5. Added Onboard SDK support 6. Added support for ESC updates 7. Added support for Tools > Shutter settings 8. Added data types in Dataviewer 9. Optimized Function Channels N3 1. Added support for Tools > Shutter settings 2. Added data types in Dataviewer 3. Optimized Function Channels
M600, M600 Pro 1. Added support for Function Channels 2. Added support for Tools > Shutter settings 3. Added Help sections for replacing signal cables of landing gears. (only for M600) Takyon Z14120 1. Added support for saving ESC data locally 2. Added support for DataViewer Mavic 1. Added DJI Goggle firmware updates through the remote controller 2. Added Mavic Pro firmware update through the remote controller Goggles 1. Added support for firmware updates Phantom 4 Pro 1. Added support for Factory Resetting in CrystalSky D-RTK 1. Added support for Flight Records General 1. Added support for DataViewer function in Phantom 4, Phantom 4 Pro, Mavic Pro, and Inspire 2.
Date : Dec 15 th, 2016 DJI Assistant 2 : v 1.0.8 Inspire2 Firmware : v 1.0.0135 M100 Firmware : v 1.3.1.00 N3 Firmware : v 1.0.0.80 M600 Firmware : v 1.0.0.43 A3 Firmware : v 1.5.0.0 M600 Pro Firmware : v 1.0.0.54 Mavic Firmware : v 01.02.0810 Snail 430-R Firmware : v 1.0.0.3 Phantom4 Pro Firmware : v 1.01.201 Takyon Z14120 Firmware : v 1.8.2.5 Phantom4 Firmware : v 1.2.503 Takyon Z415-M / Z425-M Firmware : v 1.5.0.0 D-RTK Firmware : v 1.0.0.18 Takyon Z420/318Firmware : v 1.4.0.0 Datalink Pro Firmware : v 1.0.0.12 Osmo Mobile Firmware : v 1.1.0.30 Lightbridge 2 Firmware : v 1.1.30 E5000 Firmware : v 0.0.1.0 What's new Inspire 2 1. Added support for firmware updates 2. Added support for Flight Records 3. Added support for visual calibration 4. Added support for Simulator 5. Added support for Licence Keys: Serial Number Search and Licence Key Activation N3 1. Added support for ESC updates Phantom 4 Pro 1. Added support for firmware updates 2. Added support for Flight Records 3. Added support for visual calibration 4. Added support for Simulator E5000 1. Added support for firmware updates Takyon Z14120 1. Added error code types in the Data Recorder 2. Added voice switching between English and Mandarin Chinese General 1. Added support for visual calibration in the Mavic, Phantom 4, Phantom 4 Pro, and Inspire 2. 2. Added one-click uploading of flight recorder and update logs to a server for fault analysis in the Mavic, Phantom 4, Phantom 4 Pro, and Inspire 2.
Date : Nov 15 th, 2016 DJI Assistant 2 : v 1.0.7 N3 Firmware : v 1.0.0.80 M100 Firmware : v 1.3.1.00 A3 Firmware : v 1.5.0.0 M600 Firmware : v 1.0.0.43 Mavic Firmware : v 01.02.0810 M600 PRO Firmware : v 1.0.0.54 Osmo Mobile Firmware : v 1.1.0.30 Snail 430-R Firmware : v 1.0.0.3 Phantom4 Firmware : v 1.2.503 Takyon Z14120 Firmware : v 1.7.2.3 D-RTK Firmware : v 1.0.0.18 Takyon Z415-M / Z425-M Firmware : v 1.5.0.0 DATALINK PRO Firmware : v 1.0.0.12 Takyon Z420/318 Firmware : v 1.4.0.0 Lightbridge 2 Firmware : v 1.1.30 What's new N3 1. More intuitive Sensitivity and Propulsion Allocation settings 2. Updated help section 3. Added Polyhedron IMU calibration option 4. Added DataViewer for Mac 5. Added Onboard SDK support Mavic 1. Added factory Wi-Fi password reminder 2. Enabled remote controller log exports M600 PRO 1. Added support for M600 PRO Takyon Z14120 1. Enabled ESC parameters adjustment 2. Enabled ESC data analysis and deletion on the aircraft when connected to a computer Takyon Z420/318 1. Improved UI and UE SNAIL 430-R 1. Improved UI and UE 2. Integrated Snail driver software
Date : Oct 10 th, 2016 DJI Assistant 2 : v 1.0.6 A3 Firmware : v 1.5.0.0 M600 Firmware : v 1.0.0.39 Takyon Z415-M / Z425-M Firmware : v 1.5.0.0 Takyon Z420/318 Firmware : v 1.4.0.0 D-RTK Firmware : v 1.0.0.17 DATALINK PRO Firmware : v 1.0.0.12 Lightbridge 2 Firmware : v 1.1.30 M100 Firmware : v 1.3.1.00 Osmo Mobile Firmware : v1.1.0.30 Mavic Firmware : v1.2.0.0 Snail 430-R Firmware : v1.0.0.1 Phantom4 Firmware : v1.2.503 What s new Mavic,Phantom4 1. Added support for firmware updates 2. Added support for Flight Records 3. Added support for visual calibration SNAIL 430-R 1. Added page for Parameter Settings 2. Added support for updates A3 1. Optimized functions in the Dashboard, Basic Settings - Installation, Safety Settings, Battery, Tool - System Topology, and Flight Record. 2. Improved remote controller, EXP, and IMU calibration 3. Flight Record moved to Left Navigation Bar 4. Added DataViewer software (No Mac support) 5. Fixed bug causing crashes on the Sensitivity page Osmo Mobile 1. Added support for firmware updates DATALINK PRO 1. Fixed bug causing update failure
Date : Aug 8 th, 2016 DJI Assistant 2 : v 1.0.5 A3 Firmware : v1.3.0.0 M600 Firmware : v1.0.0.39 Takyon Z415-M / Z425-M Firmware : v1.5.0.0 Takyon Z420/318 Firmware : v1.4.0.0 D-RTK Firmware : v1.0.0.17 DATALINK PRO Firmware : v1.0.0.10 Lightbridge 2 Firmware : v 1.1.30 M100 Firmware : v 1.3.1.00 What s new Added support for Mac OSX 10.11 and higher. Added support for: A3, M600, Takyon Z415-M / Z425-M, Takyon Z420/318, D-RTK, DATALINK PRO, Lightbridge 2, and M100. Notes (1) Run DJI Assistant 2 from Finder the first time you use it on Mac OSX. Afterwards, use the DJI Assistant 2 icon in Finder or Launchpad. (2) The Mac version of DJI Assistant 2 does not support updating on the M100. If required, use a Wind ows computer to update. (3) To use the M600 or A3, upgrade OSX to version 10.11.
Date : Jul 5 th, 2016 DJI Assistant 2 : v 1.0.5 What s new Fixed issue of mounting offset values are incorrectly reset in A3. Added feature to enable factory restore in A3. Added support for D-RTK. Added support for retractable landing gear. Added support for DATALINK PRO. Added feature to enable configuration of ESC for Matrice 600. Bug fixes.
Date : Apr 28 th, 2016 DJI Assistant 2 : v 1.0.4 What s new Added support for Matrice 600 and A3. Fixed issue of RTK and GPS values are not mapped correctly in SDK when connecting to Matrice 100.