XPLORER V - XIRO - HD XPLORER V Platform 3-axis stabilized HD Camera 1080 Manufacturer:XIRODRONE Reference:AXR-16001 Loyalty points offered:291 Price:699.00 XPLORER V - XIRO - HD EVERYTHING YOU NEED IN A BOX The Xplorer-V is ready to fly right out of the box. It is equipped with a 1080p HD camera 3-axis stabilized Attach the propeller, install the battery and you enter the fascinating world of photography and aerial video.
XPLORER V3 AXIS STABILIZED PLATFORM CAMERA HD 1080 FLY WITHOUT WAITING The Xplorer Xiro is ready to fly out of the box. Attach the propeller, place the battery and take off! Anyone can fly with the Xplorer. EASY TO FLY The Xplorer Xiro is easy to fly thanks to the off buttonand automatic landing, the integrated GPS and automatic return button. VERY ROBUST AND MODULAR The Xplorer is a very robust Xiro drone. Its modular structure can evolve easily. KIT CONTENTS
Xplorer ready to fly Transmitter amplification system of WiFi range Stabilized Platform 3-axis camera with 1080p HD. LiPo 5200 mah Smart Battery Smart charger for drive battery Intelligent Charger for the transmitter Power for the intelligent charger 1 set of screws (4pcs) 1 set of spare propellers (4pcs) Multilingual Instruction Manual The Xplorer Xiro-V comes with a high performance HD camera attached to a stabilized platform on 3- axes. Xplorer-V offers the best of the best NACELLE STABILIZED 3-AXES The high accuracy 3-axis stabilization system achieves a great level of video recording from the air, stable, smooth and without interference. The camera operates in FPV guide or non-fpv and can be configured from the Xiro application. The vertical viewing angle can be adjusted from the application. WIFI BOOSTER SCOPE The transmitter is equipped with an amplifier in the 2.4 GHz range, which is used to increase the pad between your smartphone and the Xplorer. In an open area without obstacles, the transmission range of up to 500 m. CAMERA HD HIGH PERFORMANCE The high performance HD camera provides crystal clear pictures and videos as crystal.
It captures full HD video in 1080p / 30 frames / second and 720p / 60 frames / second and takes photos up to 14 megapixels. The camera supports burst mode, the timed captures and replays recordings. MICRO SD CARD 8 GB REMOVABLE PROVIDED The V Xplorer comes with a Micro SD card of 8GB. It accepts Micro SD cards up to 32GB. SUPPORTED FILE FORMAT ADOBE DNG RAW Captured photos to DNG raw saves all the original information for powerful post-processing. It thus supports the management of profiles for Adobe goals remove distortions. SETTING THE PARAMETERS OF THE REMOTE CAMERA The camera settings, including image quality, ISO speed, exposure compensation, white balance and capture size can be adjusted from the XIRO application. TIMING FOR SHARING ALBUMYou can sync photos and videos (recorded on the Micro-SD card) X- Plorer your-v directly to your smartphone. The Wi-Fi will do it and you do not need cables or computer. * RÈGLES D'USAGE D'UN DRÔNE DE LOISIR. "cliquez"
AMPLIFIER RANGE WI-FI The transmitter is equipped with a Wi-Fi range amplification system 2.4GHz which is used to enlarge the pad between your smartphone and the Xplorer. All flight information, the actual status of the device and the video images will be transmitted to a distance of 500 meters in an open area without obstacles. THE ÉMETEUR IS STANDING WITH THE CARRYING HANDLE SMARTPHONE SUPPORT The multi-angle universal support system works with most smartphones, it becomes a firmly fixed FPV monitor. The cradle is easy to use and can retract completely into the transmitter for easy storage and transport. CHECKING THE CAMERA ANGLE The multi-angle universal support system works with most smartphones, it becomes a firmly fixed FPV monitor. The cradle is easy to use and can retract completely into the transmitter for easy storage and transport. CONTROL INTENSITY LIGHTING Alter the intensity of the Xplorer control lights by turning the control dial on the left side of the transmitter. ISSUER LIGHT AND EASY TO CARRY The ergonomic design offers the best comfort during the flight. The suspension ring to perfectly balance the transmitter center, reducing driver fatigue. ALERTS BY VIBRATIONS ISSUER - 5.8 GHZ TECHNOLOGY BI-DIRECTIONAL Technology without wire bidirectional 5.8 GHz offers extremely link reliable between the transmitter and the Xplorer. The issuer is charged through a Micro USB cable and can operate up to three hours. The flight range is limited to 500 meters.
BUTTON TAKEOFF / LANDING AUTOMATIC Press the button and the flight control system ensures takeoff. Press the same button to land safely. RETURN TO STARTING POINT Press the "Return Home" button and Xplorer comes back to where it took off. The "Return Home" mode is automatically activated if the Xplorer loses the connection to the transmitter or if the level of the battery reaches a critical value. When the distance between the point of return and Xplorer is more than 25 meters and the initial height less than 20 meters, the Xplorer goes up to 20 meters and returns to its starting point to land safely. 3 LEVELS OF FLIGHT CONTROL You can select three driving levels. The beginner mode to get familiar with the Xplorer. For example, speed, distance and altitude are limited to reduce the risk of losing control of your Xplorer. At each level, speed, range and altitude increases. IOC - INTELLIGENT CONTROL OF DIRECTION The Xplorer has a mode Intelligent Orientation Control (IOC). Normally the flight forward direction of a multirotor is the same as the direction of the nose. Using the Intelligent Orientation Control (IOC), the Xplorer will ignore its actual orientation, but will use the base as a reference. Push the stick forward and Xplorer depart from the starting point. Pull the handle back and the Xplorer will return to the starting point. This is an advanced feature offered as standard on all models Xplorer. ALERTS BY VIBRATIONS When driving, no need to look constantly indicators. The transmitter will vibrate if your attention is requested. For example, if the battery becomes too low or signal loss. INDICATORS LEDS The integrated LED indicators on the transmitter inform you about the state of the battery on the GPS, the connection with the Xplorer and Wi-Fi. 4 STEERING MODES You can choose from 4 different control modes. As standard, the transmitter is configured in Mode 2 (throttle left). But you can easily reprogram the transmitter to another without disassembly mode.
FLIGHT INFORMATION ON SMARTPHONE Download Xiro application on your smartphone and place it on the transmitter. The application is available for Android and Apple ios devices. You will have access to all data and real-time flight status as: Flight altitude Flight speed The distance The power of Wi-Fi The current connection status The level of the battery of the transmitter The level of the battery of the Xplorer
This information is available even if the camera is not turned on. REAL-TIME VIDEO You see exactly what your smartphone camera records from the sky. The modes FPV (First Person View) or non-fpv are both supported. REMOTE CONTROL SETTINGS CAMERA The settings of the camera, including image quality, ISO speed, compensation exposure, white balance and capture size can be adjusted from the XIRO implementation.. WIFI BOOSTER SCOPE The transmitter has a range amplification system Wifi 2.4GHz which is used to increase the effective range of connection between your smartphone and the Xplorer. All data in your flight, the current status of the device and the video images are transmitted to a distance of 500 meters in an open area without obstacles. GPS SYSTEM FLIGHT CONTROL The autopilot system with GPS provides position keeping, altitude and lock the stable stationary, which allow you to keep attention to take pictures and videos breathtaking. The flight control system GPS is available on all models Xplorer. FEATURE RETURN TO STARTING POINT If you are confused or have lost the Xplorer of view, do not worry, activatejust the back button on your transmitter. The Xplorer automatically beginsits return to the starting point sequence and will land at the place you have set as a starting point. In case it is low level, the Xplorer will first climb to a height of security and then begin its return. With the Xplorer, you always have control, even when the Xplorer began his sequence back to the starting point, you will still have control and will follow your orders. BACK IF BATTERY LOW The Xplorer automatically returns to its starting point when his weakened battery. BACK IF SIGNAL LOSSThe Xplorer automatically returns to its starting point if the distance tothe transmitter is beyond the maximum range or in case of total loss of signal betweenthe issuer and the
WAYPOINTS - WAYPOINTS STORING With your smartphone, you can schedule a flight plan with memory up to 16 waypoints. After registration, your Xplorer automatically follow the flight plan.
XPLORER SPECIFICATIONS Diagonal between the axes of engines: 350mm Weight (with battery): 995 gr Vertical accuracy - stationary (GPS mode): ± 0.5mtr Horizontal Accuracy - stationary (GPS mode): ± 1.5mtr Maximum speed: 15 m / s Maximum rate of climb: 6 m / s Maximum descent rate: 2.5 m / s Maximum tilt angle: 35 Maximum angular speed: 200 / s ACCU PROPULSION: 3S LiPo 11.1V Type: 5200mAh Capacity: 0-40 C. Temperature range when the load: 20 C-50 C Temperature range during discharge RADIO Frequency: 5727-5789MHz Voltage / current range: 3.7V / 500mA Range: 500 m Transmitting power: 25mW (EC) / 100mW (FCC) Receiver Sensitivity (1% PER): -93dBm Integrated battery: 3.7V 4000mAh AUGMENTER SCOPE WIFI Frequency: 2412-2462MHz Voltage / Current range: 3.7V / 500mA Range (open area): 500m Transmission power: 20dBm 3 AXIS STABILIZED PLATFORM Weight: 140g Current use: 600 ma Vibration angular range: ± 0.025 Control Range: Pitch: -90-0 Max speed control: Pitch -90 / s HD CAMERA FOR XPLORER V ONLY Weight: 60g Sensor size: 1 / 2.3 " Actual number of pixels: 14 Megapixels Resolution: 4384 x 3288 Camera angle: 140 / 110 / 85 HD Recording: 1080p30 / 720p60 Link to the product