AR-R5700 Serial Installation Guide 1
Contents 1 Introduction of AR-R5700serial 03 1-1 Discrimination 03 1-2 Packing List 03 2 Procedure of Assembly/Disassembly 04 2-1 Installing the 2.5 or3.5 Disk Drive(HDD)... 04 2-2 Installing the Memory card 07 2-3 Installing Extension PCI card 2-4 Installing CPU and HeatsinkModule 08 10 2
1. Introduction of AR-R5700 Series AR-R5700 series is a 1U height, rack-mounted system product. It is designed mainly for networking applications. With powerful Intel CPU core & an expansion module in option for optical/copper-wire LAN interface, AR-R5700 can satisfy the user requirements in performance and complex networking configurations. Besides, excellent operating temperature at least 45 reliability, it can be installed in more severe environment than a generally commercial network device. AR-R5700 has diverse physical interface in the front panel (fiber interface in option), such as up to 10 Giga LAN ports, two fiber LAN ports in option, build-in LEDs, 2 USB Ports, one Console port, Power Button, Reset Button, and Keyboard/Mouse interface. In addition, the system can be extended SSD/memory capacity via adding-in DRAM module and CF card according to the users needs. 1.1 Discrimination (included Rubber Foot) Description CPU Board Dimensions AR-R5500 AR-B5700series 440 44 448 (mm) 3
1.2 Packing List Description Q ty AR-R5700serial 1 Power Core 1 CD 1 KB/MS Cable 1 Mounting Bracket (+screw) 2 Console cable 1 SATA Cable (HDD) 1 Quick user manual 1 4
2. Procedure of Assembly/Disassembly 2-1 Installing the 2.5 /3.5 Hard Disk Drive (HDD) The following are step-by-step installation. 1. Remove the AC-power via un-plug the power cord of AR-R5700. 2. Unlock the two screw-nuts on top-edge to remove the top-cover out from AR-R5700, as Fig-01. Fig. 01 Remove the top cover 3. Insert the rubbers into the HDD bracket in four edges. 4. Place HDD body into the HDD bracket and lock HDD and Bracket together by screws (4pcs), as Fig-02. Fig-02 HDD bracket with HDD body 5
5. Connect the SATA cable to the SATA connector of HDD, 6. Place the HDD module (HDD+HDD bracket) back to the case 7. Fix the HDD bracket to the chassis by four screws, as Fig-03. Installing screws Fig-03. Lock HDD bracket with SATA cable 6
8. Tighten the two screw-nuts on the top edge of AR-R5700, as Fig-04. Fig-04 Lock the top cover 7
2-2 Installing CF card The following are step-by-step installation. 1. Unlock the two screw-nuts on top-edge to remove the top-cover out from AR-R5700, as Fig-05. Fig-05 Lock the top cover 2. Install the CF card & Min-PCI device Insert the mini-pci module into the mini-pci socket Insert the CF card into the CF card socket Fig-06 Install the card 8
2-3 Installing Extension Module Options (PCI-E) The following are step-by-step installation for PCI-E Module (LAN expansion module). 1. Unlock the two screw-nuts on top-edge to remove the top-cover out from AR-R5700, as Fig-05 & Fig-07. Extension LAN Module Fig-07 AR-R5700series Extension Module Options View 9
2. Remove the dummy bracket (default for AR-R5700) out from the PCI-E slot via unlock the screws on the front-side of chassis, as shown in Fig-08. Unscrew PCI-E slot Take out PCI-E slot Unscrew Fig-08. Unlock the screws for PCI-E (Modules) card 3. Tighten the PCI-E cards (modules) via locking the screw-nuts as shown in Fig-09 Screw driver on lock Fig-09 Lock PCI card 10
2-4 Installing CPU and Heatsink Module The following are step-by-step instructions for CPU and Heatsink Module. 1. Take out the air-flow tunnel of AR-R5700, as Fig-11 Fig-11 Take out the air-flow tunnel 11
2. Take out the Heatsink Module via loosing the screws of the Heatsink Module, as Fig-12 Please put here thermal glue! Step-4 Step-2 Step-1 Step-3 Fig-12 Take out the Heatsink Module 12
Appendix CPU in support Intel Proc No Clock Speed Cache FSB Note processor E8400 3G 6M 1333 processor E8300 2.83G 6M 1333 processor E6700 2.66G 4M 1066 processor E6600 2.4G 4M 1066 processor E6400 2.133 2M 1066 processor E4300 1.8 2M 800 processor E2160 1.8 1M 800 Celeron D processor 440 2.0GHz 512K 800 Celeron D processor 420 1.6GHz 512K 800 Note: Standard product support CE, FCC Class A only. For extra certification, it is belonged to customer s demands. 13