TECHNICAL DESCRIPTI SGS Smart Gate Sensors Modular. Flexible. Self-synchronising.
SGS Smart Gate Sensors from SICK: Offering impressive versatility The latest opto-electronic know-how from SICK for countless new application areas Thanks to innovative Slim and Flat construction, the sophisticated and easy-to-use Click and Go assembly concept and the straightforward teach-in setup, the fl exibility of the SICK light grid has been signifi cantly increased for new areas of application. Whether for lifts, automatic doors, picking shelves or conveyor belts, the SGS light grid from SICK is the easy-to-install and reliable solution for many tasks. Its small size and the Slim and Flat principle open up completely new application areas. The light grids can be integrated into your application either slim or flat. You choose! Slim + Flat
Click and Go assembly concept Multiconnector for easy interlinking of several light grids Interfaces compatible with PNP industry standards Monitoring length 600 mm 00 mm Max. range: 0 m Response time: < 0 ms Resolution: 0 mm and 80 mm Easy Teach-in setup Muting function Optical synchronisation SICK SGS SMART GATE SENSORS
SGS Smart Gate Sensors Operating range m/7 m Through-beam light grid 0 mm beam spacing Optical synchronization Ultra slim housing for area saving installation Easy commissioning Dimensional drawing sender. 90 0 mm x (Beam ) + 7. = Housing height. 5.8 8. 5 M8 5 Last beam Beam spacing 0 mm Detection height, 6 beams First beam Connection: cable with plug M8, - and -pin Connections types All types All types Accessories Cables and connectors Mounting systems Receiver M8, -pin L+ Teach/ M Sender M8, -pin L+ Test M SGS SMART GATE SENSORS SICK
SGS Technical data SGS- S08 PPS W00 F08 PPS W00 S08 P7PS W00 F08 P7PS W00 S0 PPS W00 F0 PPS W00 S0 P7PS W00 F0 P7PS W00 Operating range 0... m 0... 7 m Beam spacing 0 mm Number of beams 8 6 Detection height 080 mm 00 mm Switching output ) PNP Switching mode ) Light-switching MDO ) /resolution 5 mm/5 mm Profile type Slim Flat Light source LED, infrared Synchronization Optical Voltage supply V ) S V DC ± 0 % Residual ripple < 0 % within V S tolerances Current consumption sender Typ. < 0 ma + 6 ma/beam Current consumption receiver Typ. < 65 ma Output current I A max. 00 ma Response time 5) parallel beam/ 0 ms/60 ms multiple scan Response time 5) coded version 0 ms/0 ms Parallel beam/multiple scan Initialisation period s Output load Capazitive load: 00 nf Inductive load: H EMC test CE 6097-5- High immunity to ambient light 50,000 lx (sun light) Connection type sender Plug, M8, -pin Connection type receiver Plug, M8, -pin VDE protection class Circuit protection 5) A, B, C Enclosure rating IP 65 Ambient temperature Operation 5 C... +55 C Storage 0 C... +70 C Mechanical resistance Vibration: 5 g/0-55/s IEC 68--6 Shock: 0 g/6 ms IEC 68--9 Weight 0 (5 g/beam) 80 (5 g/beam) Material Housing: PMMA Front lens: PMMA ) NPN on request ) =, when no light beam is interrupted ) Multiple scan/parallel beam ) Limit values 5) With resistive load 6) A = V S -connections reverse-polarity protected B = Outputs short-circuit protected C = Interference pulse suppression LED display Sender LED green, Power Receiver LED yellow, when no object Order information Type SGS-S08PPSW00* ) SGS-F08PPSW00* ) SGS-S08P7PSW00* ) SGS-F08P7PSW00* ) SGS-S0PPSW00* ) SGS-F0PPSW00* ) SGS-S0P7PSW00* ) SGS-F0P7PSW00* ) Order no. 05007 05008 05009 0500 050 050 050 050 * ) Not a safety component according to EU machine regulations SICK SGS SMART GATE SENSORS 5
SGS8 Smart Gate Sensors Operating range m/7 m Through-beam light grid 80 mm beam spacing Optical synchronization Ultra slim housing for area saving installation Easy commissioning Dimensional drawing sender. 90 0 mm x (Beam ) + 7. = Housing height. 5.8 8. 5 M8 5 Last beam Beam spacing 80 mm Detection height, beams First beam Connection: cable with plug M8, - and -pin Connections types All types All types Accessories Cables and connectors Mounting systems Receiver M8, -pin L+ Teach/ M Sender M8, -pin L+ Test M 6 SGS SMART GATE SENSORS SICK
SGS Technical data SGS8- S0F 7PS WA S0F 7PC WA Operating range 0... 7 m Beam spacing 80 mm Number of beams Detection height 00 mm Switching output ) PNP Switching mode ) Light-switching MDO ) /resolution 5 mm/ 85 mm Profile type Slim Flat Light source LED, infrared Synchronization Optical Voltage supply V ) S V DC ± 0 % Residual ripple < 0 % within V S tolerances Current consumption sender Typ. < 0 ma + 6 ma/beam Current consumption receiver Typ. < 65 ma Output current I A max. 5) 00 ma Response time 6) parallel beam/ 0 ms/60 ms multiple scan Response time 6) coded version 0 ms/0 ms Parallel beam/multiple scan Initialisation period s Output load Capazitive load: 00 nf Inductive load: H EMC test CE 6097-5- High immunity to ambient light 50,000 lx (sun light) Connection type sender Plug, M8, -pin Connection type receiver Plug, M8, -pin VDE protection class Circuit protection 7) A, B, C Enclosure rating IP 65 Ambient temperature Operation 5 C... +55 C Storage 0 C... +70 C Mechanical resistance Vibration: 5 g/0-55/s IEC 68--6 Shock: 0 g/6 ms IEC 68--9 Weight 0 g (5 g/beam x ) Material Housing: PMMA Front lens: PMMA ) NPN on request ) =, when no light beam is interrupted ) Multiple scan/parallel beam ) Limit values 5) = 50 ma and = 50 ma 6) With resistive load 7) A = V S -connections reverse-polarity protected B = Outputs short-circuit protected C = Interference pulse suppression LED display Sender LED green, Power Receiver LED yellow, when no object Order information Type SGS8-S0F7PSWA* ) SGS8-S0F7PCWA* ) Order no. 0505 0506 * ) Not a safety component according to EU machine regulations SICK SGS SMART GATE SENSORS 7
Menu control for parametrising the SGS Smart Gate Sensors flow diagram -IN MODE C s... 5 s RUN mode Func > 5 s/> 0 s if keylock Func Optimum light reception After 0 s automatically in RUN mode Func Light reception not optimised Activate alignment aid and align sensors After 0 s automatically in RUN mode Func No light received Activate alignment aid and check light path After 0 s automatically in RUN mode Crossed beam < s Parallel beam s... 5 s s... 5 s s... 5 s Alignment aid < s Alignment aid in s... 5 s s... 5 s s... 5 s Switching output < s Switching output s... 5 s s... 5 s s... 5 s Menu item Multiple scan Parallel beam: This function allows the user to parametrise the device for multiple scan of the sensor beams or operation in parallel alignment. With multiple scan, the light grid has an MDO of 5 mm and, with parallel beam, of 5 mm. Menu item Automatic sensor alignment Manual sensor alignment: In this option, the user decides bet ween manual and automatic alignment of the sensors. For fi ne adjustment, activation of the automatic alignment is recommended. Traffi c light function, LED x green, yellow. Menu item Output on: n = if all beams are free. = if a beam is interrupted. 8 SGS SMART GATE SENSORS SICK
FIGURATI MODE Auto teach AUTO s... 5 s Keylock s... 5 s Standard values s... 5 s Switching output s... 5 s Muting MUTING > 5 s or after 0 s (if not saved) automatically in RUN mode s... 5 s < s s... 5 s < s s... 5 s < s s... 5 s < s s... 5 s < s Auto teach in AUTO s... 5 s Keylock in s... 5 s Standard values in s... 5 s Switching output s... 5 s Muting in MUTING s... 5 s Menu item Automatic Teach-in on Automatic Teach-in off: After operation, the light grid becomes Auto Teach-in. The Teach-in button is locked. Unlock: press after > 0 s. Menu item Factory settings on Factory settings off: With this function, all parameters can be reset to the factory settings. Menu item Output on Output off: n = if all beams are free. = if a beam is interrupted. Menu item Muting function on Muting function off: = If a beam is permanently interrupted, the light grid goes after 60 s. = remains in as long as the beam is interrupted. SICK SGS SMART GATE SENSORS 9
Accessories Dimensional drawings and order information Mounting systems Retaining clip Type Retaining clip VZA-SLG Pieces Order no. 0859 0.96 Pieces 7.8.5 8..75 8. 7.8 8.7.5..97 8. 9. 0..5 Mounting bracket Type BEF-SLG Order no. 0850 0 SGS SMART GATE SENSORS SICK
Accessories Dimensional drawings and order information Mounting systems Mounting bracket Type BEF-SLG Pieces Order no. 0850 5 8.. 8. 7.80.5 5 7. SICK SGS SMART GATE SENSORS
807/008--0 GO/FD Printed in Germany (008-) Subject to change without notice The specified product features and technical data do not represent any guarantee 0 A c int Australia Phone +6 997 00 800 8 0 tollfree E-Mail sales@sick.com.au Belgium/Luxembourg Phone + (0) 66 55 66 E-Mail info@sick.be Brasil Phone +55 5-900 E-Mail sac@sick.com.br Ceská Republika Phone +0 57 9 8 50 E-Mail sick@sick.cz China Phone +85-76 6966 E-Mail ghk@sick.com.hk Danmark Phone +5 5 8 6 00 E-Mail sick@sick.dk Deutschland Phone +9 50-50 E-Mail info@sick.de España Phone + 9 80 00 E-Mail info@sick.es France Phone + 6 6 5 00 E-Mail info@sick.fr Great Britain Phone + (0)77 8 E-Mail info@sick.co.uk India Phone +9 0 8 E-Mail info@sick-india.com Israel Phone +97--999-0590 E-Mail info@sick-sensors.com Italia Phone +9 0 7 E-Mail info@sick.it Japan Phone +8 (0) 58 E-Mail support@sick.jp Nederlands Phone + (0)0 9 5 E-Mail info@sick.nl Norge Phone +7 67 8 50 00 E-Mail austefjord@sick.no Österreich Phone + (0) 6 6 8 8-0 E-Mail office@sick.at Polska Phone +8 87 0 50 E-Mail info@sick.pl Republic of Korea Phone +8-786 6/ E-Mail kang@sickkorea.net Republika Slowenija Phone +86 (0)-7 69 990 E-Mail office@sick.si România Phone +0 56 7 0 E-Mail office@sick.ro Russia Phone +7 95 775 05 E-Mail info@sick-automation.ru Schweiz Phone + 69 9 9 E-Mail contact@sick.ch Singapore Phone +65 67 7 E-Mail admin@sicksgp.com.sg Suomi Phone +58-9-5 5 800 E-Mail sick@sick.fi Sverige Phone +6 0 0 0 00 E-Mail info@sick.se Taiwan Phone +886 75-688 E-Mail sickgrc@ms6.hinet.net Türkiye Phone +90 6 587 7 00 E-Mail info@sick.com.tr USA/Canada/México Phone +(95) 9-6780 800-5-75 tollfree E-Mail info@sickusa.com More representatives and agencies in all major industrial nations at www.sick.com SICK AG Waldkirch Germany www.sick.com