SMD Terminal Blocks Small is Big

SMD Terminal Blocks Small is Big

SMD TERMINAL BLOCKS A compact and low-profi le PCB connection is required to achieve the most uniform light distribution, while minimizing shadowing. WAGO s surface-mount terminal blocks, with their combination of a fl at design and wide application scope, fully satisfy these demands. Furthermore, -, - and -pole terminal strips can be assembled without pole loss, providing complete fl exibility with just a few models. All SMD terminal blocks come in tape-and-reel packaging for full integration into an automated assembly process. Applications All the advantages of WAGO s SMD line of PCB terminal blocks enable them to be used in diverse applications. From compact, conventionally wired LED spotlights up to automatically wired, recessed ceiling luminaires, WAGO s three SMD terminal block lines provide the perfect connec- tion between driver and module. The terminal blocks accommodate a broad range of conductors making them highly versatile for worldwide applications. 5.6 mm 4.5 mm.7 mm Advantages: Low profile minimizes on-board shadowing Simple push-in termination of solid conductors Terminal strips of different lengths can be assembled without pole loss, reducing the number of variants and lowering production costs Available in pole configurations Delivery in tape-and-reel packaging for full integration into SMT soldering process Potential for signifi cant cost savings via automated pick-and-place assembly

SURFACE MOUNT TECHNOLOGY Surface-Mount Technology (SMT) means soldering electronic components directly onto PCB surface pads without drilling holes. The basic SMT process consists of applying solder paste to the PCB via solder-dispensing Automated assembly Printing (solder) Reflow Soldering Process SMT components SMD equipment, screen or stencil printing. SMT assembly is performed using fully automated placement machines. Surface-mount components are soldered to the board in infrared, convection or vapor phase ovens.

059 SERIES For the Smallest Sizes Low profile of just.7 mm : mm Terminate solid conductors from 6 to 0 (0.4 0.5 mm)* Simple push-in termination of solid conductors Easy conductor removal via operating tool Rating: 60 V,.5 kv/ (), A Available with poles Assemble terminal strips without losing any poles Available in tape-and-reel Inserting solid conductors via push-in termination Easy conductor removal, e.g., via the optional 06-859 Operating Tool *Conductor Data Connection technology PUSH WIRE 0.4 mm 6 sol. 6 V 60 V 0 V 4 5.5 mm / 0.6 0. in..5 kv.5 kv.5 kv A A A 7.9 7.4 6.5 _ UL 977 0.5 mm², pole 600 V 0 sol., or more poles 50 V 6 7.5 mm / 0. in. Nominal current UL A Note (conductor size) No reconnection of smaller conductor cross-sections Pole No SMD terminal blocks in tape-and-reel packaging, white Reel diameter: 0 mm 059-0/998-40 800 ( x 650) 059-0/998-40 000 ( x 750) 059-0/998-40 000 ( x 750) 0.5 0.8 ( Approvals per _ L _ () 8.7.5 _ 0. 0.75 mm /0.8 in..4 ().7 059 Series, mm Pin Spacing L = (pole no. x pin spacing) 0. mm

060 SERIES For Manual and Automated Wiring Systems 4.5 mm tall : 4 mm Terminate conductors from 4 to 8 (0. 0.75 mm) Simple push-in termination of solid conductors Push-buttons simplify insertion/removal of all conduc-tor types Ratings: 60 V,.5 kv/ (), 9 A Available with poles Assemble terminal strips without losing any poles Available in tape-and-reel packaging Inserting solid conductors via push-in termination. Inserting/removing fine-stranded conductors by lightly pressing on pushbutton (e.g., using a 06-860 Operating Tool). 0. 0.75 mm 0. 0.75 mm 6 V 60 V 0 V 0.5 mm.5 kv.5 kv.5 kv 4 8 Approvals per UL 977 7 9 mm / 0.8 0.5 in., pole 600 V, or more poles 0 V (UL) Pole No. 0.5 mm SMD terminal blocks with push-buttons in tape-and-reel packaging, white 060-45/998-404 500 (9 x 500) 060-45/998-404 9000 (9 x 000) 060-45/998-404 6750 (9 x 750)..7 Reel diameter: 0 mm L 4. 6. _. 4 6 _.5 (4) L = (pole no. x pin spacing) 0. m 4 4.5. 0.95 ) Push-in CAGE CLAMP Conductor Data Connection technology 4 4 mm /0.57 in.. 060 Series, 4 mm Pin Spacing

060 SERIES 8 mm Board-to-Board Link THR and Wave Soldering The -pole SMD terminal block with 8 mm pin spacing has joined WAGO s portfolio for the higher-rated voltages up to 60 V/6 kv/ in LED and industrial applications. Besides standard wiring, several LED modules can be easily assembled into a single string using board-to-board con-nection links. This minimizes labor (no manual wiring) and materials needed for connecting LED modules. WAGO s 060 Series THR PCB Terminal Blocks with soldering pins are ideally suited for THR and wave soldering. The 060 THR Series is available in both white and black housings. For more information, go to www.wago.com/060. 4 mm / 0.57 in. Pole No. 060-95/08-000 500 060-95/08-000 500 060-95/08-000 75 6 V 60 V 0 V.5 kv.5 kv.5 kv 4.5 060 Series, Board-to-Board Link Note: Only suitable for 060-45x, not for 060-40x min. 4.4 max. 6.4 max. min. 4.4 max. 6.4 max. 0. 0.75 mm 0. 0.75 mm 400 V 60 V 000 V 0.5 mm 6 kv 6 kv 6 kv 4 8 7 9 mm / 0.8 0.5 in. Approvals per UL 977 600 V (UL) Pole No. 060-85/998-404 0.5 mm SMD terminal blocks with push-buttons in tape-and-reel packaging, white 6750 (9 x 750)..7 Reel diameter: 0 mm.9. _ 6. _. 8 4 6 _.5 ( 4 ) 8 4.5. Push-in CAGE CLAMP 0.95 Connection technology Conductor Data 4 8 mm / 0.4 in.. 060 Series, 8 mm Pin Spacing

06 SERIES For Direct Power System Feed-In 5.6 mm tall : 6 mm Terminate conductors from 0 to 6 (0.5.5 mm) Simple push-in termination of solid conductors Push-buttons simplify insertion/removal of all conductor types Ideal for automated wiring systems Rating: 0 V, 4 kv/ (), 7.5 A 00 V UL 059 Available with poles Assemble terminal strips without losing any poles Available in tape-and-reel packagin The 06 THR Series is available in both white and black housings. Inserting/removing fine-stranded conductors by lightly depressing the pushbutton (e.g., using the optional 06-86 Operating Tool). 06 Series, 6 mm Pin Spacing 0.5.5 mm 0.5.5 mm 50 V 0 V 60 V 0.5 0.75 mm 4 kv 4 kv 4 kv 7.5 A 7.5 A 7.5 A 0 6 UL 059 7 0 mm / 0.8 0.9 in., pole 600 V, or more poles 00 V (UL) 0 A Pole No. 0.5 0.75 mm L.8 6.5 _. 6 7 6.5 _ 4.5 0.55.6. 5.8 5. ).8 4.6 SMD terminal blocks with push-buttons in tape-and-reel packaging, white 06-60/998-404 800 (9 x 900) 06-60/998-404 600 (9 x 700) 06-60/998-404 4050 (9 x 450) Reel diameter: 0 mm L = (pole no. x pin spacing) 0. mm 6.4 Push-in CAGE CLAMP 5.6 Connection technology. Conductor Data 5. 6 mm / in. _.7

Headquarters Sales Order Service Fax +49 57/ 887-0 +49 57/ 887 - +49 57/ 887-44 +49 57/ 887-844 69 WAGO is a registered trademark of WAGO Verwaltungsgesellschaft mbh. Copyright WAGO Kontakttechnik GmbH & Co. KG all rights reserved. The content and structure of the WAGO websites, catalogs, videos, and other WAGO media are subject to copyright. Distribution or modification to the contents of these pages and videos is prohibited. Furthermore, the content may neither be copied nor made available to third parties for commercial purposes. Also subject to copyright are the images and videos that were made available to WAGO Kontakttechnik GmbH & Co. KG by third parties. 0888-058/00-690 SMD FAMILY BROCHURE. US 0/06-00 Printed in Germany Subject to design changes WAGO Kontakttechnik GmbH & Co. KG Postfach 880 85 Minden Hansastraße 7 4 Minden info@wago.com www.wago.com