XSP Series XSP LED Street/Area Luminaire Double Module Version B Product Description Designed from the ground up as a totally optimized LED street and area lighting system, the XSP Series delivers incredible efficiency without sacrificing application performance. Beyond substantial energy savings and reduced maintenance, Cree achieves greater optical control with our NanoOptic Precision Delivery Grid optic when compared to traditional cobra head luminaires. The XSP Series is the better alternative for traditional street and area lighting with quick payback and improved performance. Applications: Roadway, parking lots, walkways and general area spaces Performance Summary Shown with PT-H Tenon 6." (665mm) NanoOptic Precision Delivery Grid optic Assembled in the U.S.A. of U.S. and imported parts CRI: Minimum 70 CRI CCT: (+/- 300K); (+/- 500K) Limited Warranty : 0 years on luminaire/0 years on Colorfast DeltaGuard finish 4.6" (7mm) See http://lighting.cree.com/warranty for warranty terms Accessories Field-Installed 4" (368mm) Backlight Control Shield XA-SPBLS - Provides / mounting height cutoff Bird Spikes XA-SPBRDSPK Multi-Level Sensor location (ordered as an option) Shown with Type 5ME Optics Voltage Weight 0-77V 6 lbs. (.0kg) Ordering Information Example: BXSP-B-HT-ME-B--UL-SV 347-480V 9 lbs. (3.kg) BXSP B HT B Product Version Mounting Optic CCT Voltage Color Options Options BXSP B HT Horizontal Tenon Asymmetric LG* Type II Long ME* Type II 3ME* Type III 4ME* Type IV Symmetric 5ME Type V 5SH Type V Short B 0W 57K UL Universal 0-77V UH** Universal 347-480V BK Black BZ Bronze SV Silver WH White F Fuse When code dictates fusing, use time delay fuse Available for US applications only G Small Four Point Mounting Mounts to " (3mm) IP,.66" (4mm) O.D. horizontal tenon J Large Four Point Mounting Mounts to " (5mm) IP,.375" (6m) O.D. horizontal tenon ML Multi-Level Refer to ML spec sheet for details Available with UL voltage only High: 00%, Low : 6% N-Q9/Q8/Q7/Q6/Q5/Q4 Utility Label, NEMA 7-Pin Photocell Receptacle & Field Adjustable Output Must select Q9, Q8, Q7, Q6, Q5 or Q4 Settings Q3-Q are not available with N option External wattage label per ANSI C35 based on Q setting selected 7-pin receptacle per ANSI C36.4 Factory connected 0-0V dim leads Photocell and shorting cap by others / may only be adjusted down in the field Refer to page 6 for power and lumen values Q9/Q8/Q7/Q6/Q5/Q4/Q3/Q/Q Field Adjustable Output Must select Q9, Q8, Q7, Q6, Q5, Q4, Q3, Q, or Q / are fully adjustable in the field Refer to page 6 for power and lumen values R NEMA 7-Pin Photocell Receptacle 7-pin receptacle per ANSI C36.4 Factory connected 0-0V dim leads Photocell and shorting cap by others UTL Utility Label Includes exterior wattage label per ANSI C35 that indicates the maximum available wattage of the luminaire * Available with Backlight Shield when ordered with field-installed accessory (see table above) ** 347-480V utilizes magnetic step-down transformer. For input power for 347-480V, refer to the Electrical Data table Rev. Date: V5 R 0/7/07
XSP LED Street/Area Luminaire Double Module Version B Product Specifications CONSTRUCTION & MATERIALS Die cast aluminum housing Tool-less entry Mounts on " (3mm) IP,.66" (4mm) O.D. or " (5mm) IP,.375" (6m) O.D. horizontal tenon (minimum 8" [03mm] in length) and is adjustable +/- 5 to allow for fixture leveling (includes two axis T-level to aid in leveling) Luminaire secures with two mounting bolts standard; optional four point mounting available Exclusive Colorfast DeltaGuard finish features an E-Coat epoxy primer with an ultra-durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation and abrasion. Black, bronze, silver and white are available Weight: 0-77V: 6 lbs. (.0kg); 347-480V: 9 lbs. (3.kg) ELECTRICAL SYSTEM Voltage: 0-77V or 347-480V, 50/60Hz Factor: > 0.9 at full load Total Harmonic Distortion: < 0% at full load Class driver Integral 0kV surge suppression protection standard When code dictates fusing, a slow blow fuse or type C/D breaker should be used to address inrush current Designed with 0-0V dimming capabilities. Controls by others 0V Source Current: 05mA REGULATORY & VOLUNTARY QUALIFICATIONS culus Listed Suitable for wet locations Certified to ANSI C36.3-00, 3G bridge and overpass vibration standards Meets CALTrans 6 Vibration testing 0kV surge suppression protection tested in accordance with IEEE/ANSI C6.4. Meets FCC Part 5, Subpart B, Class A standards for conducted and radiated emissions Luminaire and finish endurance tested to withstand 5,000 hours of elevated ambient salt fog conditions as defined in ASTM Standard B 7 Meets Buy American requirements within ARRA DLC qualified versions available. Some exceptions apply. Please refer to https://www.designlights.org/search/ for most current information RoHS compliant. Consult factory for additional details Electrical Data* System Watts 0-77V System Watts 347-480V Total Current (A) 0V 08V 40V 77V 347V 480V B 0 06 0.86 0.49 0.43 0.38 0.30 0.3 * Electrical data at 5 C (77 F). Actual wattage may differ by +/- 0% when operating between 0-480V +/- 0% XSP Series Version B Ambient Adjusted Lumen Maintenance Ambient 5 C (4 F) 0 C (50 F) 5 C (59 F) 0 C (68 F) 5 C (77 F) Optic 5K hr Projected 50K hr Projected 75K hr Projected / Calculated 3 Asymmetric.04.0.0.0.00 Symmetric.05 0.94 0.86 0.80 3 0.74 Asymmetric.03.0.00.00 0.99 Symmetric.04 0.93 0.85 0.79 3 0.73 Asymmetric.0.00 0.99 0.98 0.98 Symmetric.03 0.9 0.85 0.78 3 0.7 Asymmetric.0 0.99 0.98 0.97 0.97 Symmetric.0 0.90 0.83 0.77 3 0.7 Asymmetric.00 0.98 0.97 0.96 0.96 Symmetric.00 0.89 0.8 0.76 3 0.70 00K hr Calculated 3 Lumen maintenance values at 5 C (77 F) are calculated per TM- based on LM-80 data and in-situ luminaire testing. Luminaire ambient temperature factors (LATF) have been applied to all lumen maintenance factors In accordance with IESNA TM--, Projected Values represent interpolated value based on time durations that are within six times (6X) the IESNA LM-80-08 total test duration (in hours) for the device under testing ((DUT) i.e. the packaged LED chip) 3 In accordance with IESNA TM--, Calculated Values represent time durations that exceed six times (6X) the IESNA LM-80-08 total test duration (in hours) for the device under testing ((DUT) i.e. the packaged LED chip)
XSP LED Street/Area Luminaire Double Module Version B Photometry All published luminaire photometric testing performed to IESNA LM-79-08 standards by a NVLAP accredited laboratory. To obtain an IES file specific to your project consult: http://lighting.cree.com/products/outdoor/street-and-roadway/xsp-series- LG 7653 5739 386 93 0 0 80. 4.7 36.6 36.6 4.7 Type II Long Distribution B 9,758 B U0 G 0,443 B U0 G RESTL Test Report #: PL0469-00 BXSP-B-**-LG-A--UL Lumens: 4,956 BXSP-B-**-LG-B--UL Lumens: 9,758 FC at grade * delivered at 5 C (77 F). Actual production yield may vary between -0 and +0% of initial delivered ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/07/03/tm-5-ratingsaddendum.pdf 7476 5607 3738 869 0 0 80. 4.7 36.6 36.6 4.7 Type II Long Distribution B 7,46 B U0 G 7,937 B U0 G RESTL Test Report #: PL045-00 BXSP-B-**-LG-A--UL w/xa-spbls Lumens: 3,837 BXSP-B-**-LG-B--UL w/xa-spbls Lumens: 7,46 FC at grade * delivered at 5 C (77 F). Actual production yield may vary between -0 and +0% of initial delivered ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/07/03/tm-5-ratingsaddendum.pdf ME 6556 497 378 639 0 0 70. 4.7 36.6 36.6 4.7 Type II Distribution B 9,6 B U0 G 0,680 B U0 G RESTL Test Report #: PL0348-00A BXSP-B-**-ME-A--UL Lumens: 5,70 BXSP-B-**-ME-B--UL Lumens: 9,6 FC at grade * delivered at 5 C (77 F). Actual production yield may vary between -0 and +0% of initial delivered ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/07/03/tm-5-ratingsaddendum.pdf 50 3759 506 53 0 0 0. 70 4.7 36.6 36.6 4.7 Type II Distribution B 8,66 B U0 G 9,85 B U0 G RESTL Test Report #: PL0348-00A BXSP-B-**-ME-A--UL w/xa-spbls Lumens: 4,03 BXSP-B-**-ME-B--UL w/xa-spbls Lumens: 8,66 FC at grade * delivered at 5 C (77 F). Actual production yield may vary between -0 and +0% of initial delivered ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/07/03/tm-5-ratingsaddendum.pdf
XSP LED Street/Area Luminaire Double Module Version B Photometry All published luminaire photometric testing performed to IESNA LM-79-08 standards by a NVLAP accredited laboratory. To obtain an IES file specific to your project consult: http://lighting.cree.com/products/outdoor/street-and-roadway/xsp-series- 3ME 868 6463 4309 54 0 0 0. 4.7 36.6 36.6 4.7 Type III Distribution B 9,6 B U0 G 0,680 B U0 G RESTL Test Report #: PL053-00A BXSP-B-**-3ME-B--UL Lumens: 0,074 BXSP-B-**-3ME-B--UL Lumens: 9,6 FC at grade * delivered at 5 C (77 F). Actual production yield may vary between -0 and +0% of initial delivered ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/07/03/tm-5-ratingsaddendum.pdf 350 640 760 880 0 0 0 65. 4.7 36.6 36.6 4.7 Type III Distribution B 8,70 B U0 G 9,078 B U0 G RESTL Test Report #: PL0397-00A BXSP-B-**-3ME-A--UL w/xa-spbls Lumens: 3,749 BXSP-B-**-3ME-B--UL w/xa-spbls Lumens: 8,70 FC at grade * delivered at 5 C (77 F). Actual production yield may vary between -0 and +0% of initial delivered ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/07/03/tm-5-ratingsaddendum.pdf 4ME 3979 984 990 995 0 0 0 45. Type IV Distribution RESTL Test Report #: PL047-00 BXSP-B-**-4ME-A--UL Lumens: 4,947 0 BXSP-B-**-4ME-B--UL Lumens: 9,758 FC at grade B 9,758 B U0 G 0,443 B U0 G * delivered at 5 C (77 F). Actual production yield may vary between -0 and +0% of initial delivered ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/07/03/tm-5-ratingsaddendum.pdf 3937 953 968 984 90 0 0 0 45. Type IV Distribution RESTL Test Report #: PL0454-00 BXSP-B-**-4ME-A--UL w/xa-spbls Lumens: 3,973 0 BXSP-B-**-4ME-B--UL w/xa-spbls Lumens: 7,806 FC at grade B 7,806 B U0 G 8,354 B U0 G * delivered at 5 C (77 F). Actual production yield may vary between -0 and +0% of initial delivered ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/07/03/tm-5-ratingsaddendum.pdf
XSP LED Street/Area Luminaire Double Module Version B Photometry All published luminaire photometric testing performed to IESNA LM-79-08 standards by a NVLAP accredited laboratory. To obtain an IES file specific to your project consult: http://lighting.cree.com/products/outdoor/street-and-roadway/xsp-series- 5ME 50 3736 50 80 0 0 868 934 90 90 0. Type V Distribution 60 60 B 8,069 B3 U G3 8,405 B3 U G3 30 RESTL Test Report #: PL0880-00 BXSP-B-**-5ME-B--UL Lumens: 8,74 BXSP-B-**-5ME-B--UL Lumens: 8,069 FC at grade * delivered at 5 C (77 F). Actual production yield may vary between -0 and +0% of initial delivered ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/07/03/tm-5-ratingsaddendum.pdf 5SH 30 66 5 755 0 0 0 45. Type V Short Distribution RESTL Test Report #: PL0880-00 BXSP-B-**-5SH-B--UL Lumens: 9,3 0 BXSP-B-**-5SH-B--UL Lumens: 8,555 FC at grade B 8,555 B3 U0 G3 8,9 B3 U0 G3 * delivered at 5 C (77 F). Actual production yield may vary between -0 and -0% of initial delivered ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/07/03/tm-5-ratingsaddendum.pdf Luminaire EPA Horizontal Tenon Mount Weight: 0-77V: 8 lbs. (8kg); 347-480V: lbs. (9kg) Single @ @ 80 3 @ 4 @ Tenon Configuration If used with Cree tenons, please add tenon EPA with luminaire EPA PD-H4; PT-H PD-H4(90); PT-H(90) PD-H4(80); PT-H(80) PD-3H4(90); PT-3H(90) PD-4H4(90); PT-4H(90) 0.69 4.38.83.8 Tenon EPA Part Number EPA PD Series Tenons 0.09 PT Series Tenons 00 WM-L 03 XA-TMDA8 09 Tenons and Brackets (must specify color) Square Internal Mount Horizontal Tenons (Aluminum) - Mounts to 4" (0mm) square aluminum or steel poles PD-H4 Single PD-3H4(90) Triple PD-H4(90) Twin PD-4H4(90) Quad PD-H4(80) 80 Twin Wall Mount Brackets - Mounts to wall or roof WM-L Extended Horizontal Round External Mount Horizontal Tenons (Aluminum) - Mounts to.375"-3" (60-76mm) O.D. round aluminum or steel poles or tenons - Mounts to 3" (76mm), 5" (7mm), or 6" (5mm) square pole with PB-A* tenon PT-H Single PT-3H(90) Triple PT-H(90) Twin PT-4H(90) Quad PT-H(80) 80 Twin Direct Arm Pole Adaptor Bracket - Mounts to 3-6" (76-5mm) round or square aluminum or steel poles XA-TMDA8 Refer to the Bracket and Tenons spec sheet for more details * Specify pole size: 3 (3"), 5 (5"), or 6 (6") for single, double or triple luminaire orientation or 5 (5") or 6 (6") for quad luminaire orientation
XSP LED Street/Area Luminaire Double Module Version B Field Adjustable Output (Q9/Q8/Q7/Q6/Q5/Q4/Q3/Q/Q) Option Description: The Field Adjustable Output option enables luminaires within the XSP Series on this page to be tuned to the exact needs of a particular application through multiple levels of adjustment. When a setting other than Q9 is specified with the N option, that setting becomes the maximum wattage of the luminaire, and a NEMA label reflecting this wattage is affixed to the luminaire. Lumen output and power consumption can only be adjusted downward from the maximum wattage. Q Option & Lumen Data Q Option Setting CCT System Watts Lumen Values Optics Qualified on DLC QPL 0-77V 347-480V LG ME 3ME 4ME 5ME 5SH LG ME 3ME 4ME DLC Standard 9 8 7 6 5 4 9,758 9,6 9,6 9,758 8,069 8,555 7,46 8,66 8,70 7,806 LG, ME, 3ME, 4ME 0 06 57K 0,443 0,680 0,680 0,443 8,405 8,9 7,937 9,85 9,078 8,354 LG, ME, 3ME, 4ME 8,880 8,747 8,747 8,880 7,666 8,7 6,749 7,5 7,435 7,03 LG, ME, 3ME, 4ME 9 99 57K 9,503 9,79 9,79 9,503 7,985 8,465 7,3 8,358 8,6 7,60 LG, ME, 3ME, 4ME 8,39 8,66 8,66 8,39 7,0 7,58 6,378 7,09 7,06 6,73 LG, ME, 3ME, 4ME 83 90 57K 8,98 9,85 9,85 8,98 7,396 7,84 6,86 7,899 7,807 7,84 LG, ME, 3ME, 4ME 7,54 7,40 7,40 7,54 6,455 6,844 5,70 6,365 6,9 6,0 LG, ME, 3ME, 4ME 73 79 57K 8,04 8,4 8,4 8,04 6,74 7,9 6, 7,07 6,990 6,433 LG, ME, 3ME, 4ME 6,83 6,78 6,78 6,83 5,890 6,45 5,9 5,786 5,79 5,464 LG, ME, 3ME, 4ME 65 7 57K 7,30 7,476 7,476 7,30 6,36 6,505 5,556 6,430 6,355 5,848 LG, ME, 3ME, 4ME 5,95 5,863 5,863 5,95 5,083 5,390 4,54 5,04 4,984 4,76 LG, ME, 3ME, 4ME 56 6 57K 6,370 6,55 6,55 6,370 5,95 5,64 4,84 5,603 5,538 5,096 LG, ME, 3ME, 4ME, 5SH 3* * * 5,074 4,998 4,998 5,074 4,96 4,449 3,856 4,98 4,48 4,059 53 59 57K 5,430 5,554 5,554 5,430 4,37 4,634 4,7 4,776 4,7 4,344 3,903 3,845 3,845 3,903 3,8 3,4,966 3,306 3,68 3, 37 43 57K 4,77 4,7 4,7 4,77 3,36 3,564 3,75 3,674 3,63 3,34,830,787,787,830,340,48,5,397,369,64 9 34 57K 3,08 3,097 3,097 3,08,437,584,30,664,633,43 N/A N/A N/A * Not available with N option Electrical and lumen data at 5 C (77 F). Actual wattage and lumen output may differ by +/-0% when operating between 0-480V +/-0% 07 Cree, Inc. and/or one of its subsidiaries. All rights reserved. For informational purposes only. Content is subject to change. Patent www.cree.com/patents. Cree, NanoOptic, and Colorfast DeltaGuard are registered trademarks, and Precision Delivery Grid, XSP, and the Cree logo are trademarks of Cree, Inc. The UL logo is a registered trademark of UL LLC. NEMA is a registered trademark of the National Electrical Manufacturers Association. The DLC QPL logo is a registered trademark of Northeast Energy Efficiency Partnerships, Inc.