GPS TRACKER PHONE WATCH USER GUIDE

GPS TRACKER PHONE WATCH USER GUIDE

WELCOME TO YOUR KOKO GPS TRACKER PHONE WATCH With your KOKO GPS Phone Watch you can: Locate position Track and play back route history Send call alerts to relative persons Establish two way voice phone calls with 16 contacts Find and chat with friends Record sports performance by Pedometer Obtain weather forecasts Set alarm clocks / medicine reminders and much more Page 2

TABLE OF CONTENTS TERMINOLOGY... 4 GETTING STARTED... 5 Charging your KOKO. 5 Account Registration.. 7 Connect the Watch to the APP.. 8 USING THE APP.. 9 Dashboard... 9 Voice Call... 10 Route Tracking.. 11 Pedometer. 11 Geo-fence zones.. 11 Contacts. 12 Friends 12 Alerts & Notifications 12 Functions Settings 13 School Mode..13 Alarm Clock 14 Schedule ON/OFF 14 USING THE WATCH.. 15 Displays & Main Interface 15 Menus. 16 Call Contacts. 17 Voice Chat..17 Voice Message.. 17 Text Message 17 Find Friends.. 18 Settings.. 18 FAQs. 19 DECLARATION OF CONFORMITY 22 Page 3

TERMINOLOGY Specific terminologies for the KOKO GPS Tracker Phone Watch: Administrator: The primary account of the subscribers with highest authority to set remote monitoring and control a watch. APP: Application for Mobile phones. Contacts: Registered phone number on the watch's contact list (phone book), up to 16 contacts pre-defined by APP. LBS: Location Based Service, an assistant positioning method to locate the watch via cell tower ID. Registration: Register a user account to use the APP by e-mail address. Subscriber: Who can connect with the watch by registering a user account on the APP. A single watch can connect with up to 6 subscribers. All of the 6 subscribers can send text/voice message to that watch via the internet and can track it, locating its position. Watch: The KOKO GPS Tracker Phone Watch. Page 4

GETTING STARTED CHARGING YOUR WATCH Please charge your watch before switching it on. It is easy to charge the battery using the USB cable with the magnetic probe end. You may need to wait a few seconds to see the charging status showing on screen after the USB cable is connected. Note: Charge with DC5V/500mA USB adapter or by PC/Laptop's USB port. SWITCH ON YOUR KOKO Press the Power button for 3 seconds to switch on your watch. Date & Time and Weather information will sync automatically after a while. Note: The watch is splash proof, but it is suggested that users do not wear it to bathe, to swim or in other places where the watch may be submersed in water. Page 5

DOWNLOAD APP Download the free KOKO Watch APP from itunes (for ios phones) or Google Play store (Android phones) or visiting our website www.koko-mobile.com : Android Link: https://play.google.com/store/apps/details?id=com.kokowatch.tracker ios Link: https://itunes.apple.com/app/koko-watch/id1159242127 You can also search for KOKO Watch on itunes or Google Play store to download the APP. For the KOKO Watch APP, the following permissions need to be enabled: Locate position Read / Receive text messages (SMS) Send SMS messages Take pictures Approximate location (GPS and network-based) Precise location (GPS and network-based) Connect WiFi View network & WiFi connections Open KOKO Watch APP on your mobile phone after downloaded. Page 6

ACCOUNT REGISTRATION For new APP users, tap New Account to register by e-mail address. Please select your server region. Tip: You can keep tracking the watch even if you fly to another region (Asia, Europe or America). Just create a new account for the new region. The e-mail will be used for resetting your login password if it is lost for any reason. It is recommended not to use the same password for your e-mail account and the APP. The APP logs in automatically once the account has been registered. Page 7

CONNECT A WATCH TO KOKO WATCH APP You can add a new watch (and be the administrator of that watch, if no one has added it before), or accept an invitation from the current administrator of the APP to create a connection to a specific watch. If a watch is already subscribed to an Administrator, it must be unsubscribed by the current administrator before a new APP user adds it as its new administrator. Press watch's Menu button to enter the QR Code, and then press Call button to display the unique QR Code of watch to scan. KOKO WATCH'S PROFILE You can edit the watch's photo, nickname, gender, height and weight, etc. *The pedometer information shown on KOKO Watch / APP, depends on the calculation according to the above profile settings (male/female, height, weight, etc). Page 8

USING THE KOKO WATCH APP DASHBOARD 1. Profile: (Refer to the previous page). 2 1 3 2. Change password / Log out. 3. Map / Satellite View switch. 4. Navigation to watch on map APP. 5. Latest location & information: Positioning method. 4 5 Cell signal of the watch. Battery status. 6 7 8 Approximate location precision of the watch is normally a range between 10 and 20 meters. When satellite or cell tower signal is unstable, approx. range can't be defined by the APP, then it will indicate Unstable location signal received, possible mis-location. 6. Locating the watch: Quick: WiFi locating priority, without GPS locating, best for in-building locating purpose. Normal: WiFi locating priority, auto change to GPS/LBS locating if the location is surrounded by less than 3 crowd-sourced WiFi hotspots. Page 9

GPS: For outdoors locating purpose. If the watch is not within a clear line of sight to GPS satellites in three minutes, it will use crowd-sourced WiFi and cell tower (LBS) locating. 7. Voice Chat: APP to Watch: Voice / Text. Watch to APP: Voice. *Voice and text chat transmitted by GPRS data but not by SMS. 8. Voice Call: Monitor: Call the watch for one-way listening. Works for the administrator only. Any other phone number can't call the Watch in monitor mode. Call: Call the watch for two way voice talk. 9. Connected watch list: All watches added to the list. Add a new watch by tapping the + icon (up to 6). 10. More Menus: 9 Route More functions settings Sport for fun purposes Geo-fence zones Subscribers Contacts Friends Notifications 10 Page 10

Route: Review route history. Tap the arrow point to view detailed information. Geo-fence zones: Two type Geo-fence zones optional: subscriber's APP receives push notifications when the watch enters or exits the designated areas. Geo-fence zone's accuracy depends on the satellite / WiFi / cell towers signals. If the APP receive false alarm when the watch is close to boundaries, please check the current location of the watch by tapping Locate on APP. Subscribers: Up to 6 APP accounts can be connected with a watch. Only the Administrator has the power to subscribe/unsubscribe a watch, change watch settings, add/remove contact numbers, etc. Note: Unsubscribe a watch will delete all settings and the watch itself will return back to factory settings. Contacts: Only the first phone number on the contact list can receive SMS and call alert. Watch can receive phone calls from the contact list ONLY. Phone calls from other numbers will be ignored by the watch automatically. This function is designed to protect it from receiving anonymous call. Page 11

The Watch can select a contact and make a phone call on Menu > Contacts. If contact's phone can't communicate with the watch, you may need to add the country code to the phone number. Friends: To expand connections and have fun, a KOKO Watch can find other KOKO Watches nearby, and add them as friend (up to 5 friends per watch). Voice chat with friends by the watch menu is easy and interesting. Notifications: KOKO Watch APP receives a push notification on your phone if watch: Call alert. Low Battery. Enters/Exits Geo-fence zones. Push Notification requires mobile device online connectivity, therefore you may miss notifications if your mobile phone doesn't have internet connection. Page 12

More Function Settings: Remote Control: Tap Find Watch to make the watch ring and vibrate. Switch off the watch remotely. Power Saving Mode: Watch locating by WiFi / LBS only on route tracking, provides battery saving advantages. If more precision is preferred, this mode has to be switched off. The APP will continue locating the watch via GPS satellite by tapping Locate - GPS to check watch's current location if needed. Location Interval: The watch auto locating and uploading of position data interval. The longer the interval, the longer the battery will be preserved. Note: 30 seconds setting for outdoor real-time location tracking purpose, it defaults to GPS locating. Setting as 30 seconds will result in the battery power draining fast. Disable manual power-off: By using this function, the watch can't switch off by pressing the Power button. This is designed to prevent child or other persons who want to switch off the watch without permission. School Mode: Sets a school timed gap so kid can't play with the watch in class. Page 13

Alarm Clock: The alarm clock can be used for morning clock or other alarms, such as Medication reminder for elderly or patient, etc. Schedule Power on/off: Settings a schedule to auto switch on/off the watch. Page 14

USING KOKO WATCH DISPLAYS & MAIN INTERFACE Power / Exit button Standby: Press and hold for 3 seconds to Power on/off. Short press to check pedometer details. On Menu: Press to Exit. Calling: Press to End/Cancel phone call. Call / Enter button Call Alert: Press and hold for 3 seconds to make a call alert. On Menu: Press to Enter / Confirm. Calling: Press to Answer phone call. Menu / Next button Menu: Press to enter Menu, press again for next. Family / Private / Voice Chat: Press and hold to record voice. Page 15

Cell signal indicator KOKO Watch comes with SIM Card which supports international roaming. Please reboot it when roaming to another country. GPRS Data usage indicator GPRS data connection success. It may take few seconds or minutes to get data connection after power on. GPRS data connection lost. Watch can't upload location to APP and can't voice chat with others if seeing this on the watch. Note: Watch will automatically vibrate & reboot if data connection is lost for more than 5 minutes. Date & Time and Weather information will synchronize automatically after the GPRS data connects again. MENUS Page 16

Press the Menu button to select different menus. Press the Call button to enter a selected menu. Press the Menu button again to go to the next option, and Call button for confirm/enter. Press the Power button to exit the current menu. Contacts: Select a person on contact list and call out. Family Chat: Voice chat with all six APP subscribers. Private Chat: Voice chat with a specific APP subscriber or a friend. Voice Messages: When a voice message is received from an APP subscriber, the watch will notify by a sound and vibration, you can press the Call button to listen the voice message and reply by pressing and holding the Menu button while playing. The watch stores recent voice messages according to its memory. The previous voice messages will be replaced by latest incoming messages. Text Messages: When a text message is received from APP subscriber (not the SMS text message from mobile phone directly), the watch will notify by a sound and vibration and will show the message on screen directly. You can press the Menu button to view previous messages one by one. The watch stores ten recent text messages. The precious text messages will be replaced by latest incoming message. Page 17

To reply to the received messages, go to the Family Chat or Private Chat menu to select and reply messages. Find Friends: A watch can find other watches nearby (the other watches have to be on working status). Then you can add them as friends. Go to the Find Friends menu, then press Call button. The watch will auto search for other watches nearby, and it will show the watch's name if found. Press Call button to send an invitation and wait for confirmation from that watch (user). Voice chat with friends by Private Chat menu. A watch can connect with a maximum of 5 friends. Open the APP to remove connected friends on More > Friends. QR Code: A watch has a unique QR code for connecting to the APP. Open the QR Code menu item and press Call button to display the QR Code on screen while adding the watch to the APP. If the watch has an Administrator already, then you cannot add it by scanning the QR Code from the APP. You need to register an account by e-mail address and ask the Administrator to send an invitation to connect with the watch, or ask the Administrator to unsubscribe the watch before you add it to your APP. Settings: - Language. - Time Format: 12 or 24 hours type options. - Version: Showing the Serial Number, PLMN, APN name, Firmware version and latest firmware updated time. Page 18

FAQs 1. Why can't my watch switch on? This is most likely due to a totally discharged battery. Please charge your watch and wait for it to switch on automatically. 2. Why can't I charge the battery? Please make sure that the battery charger is connected tightly and correctly. If the watches temperature goes too high, it will enter protection mode automatically and stop the charging. Remove the charger wait for a few hours and try again. 3. What's the battery life? The watch has an inbuilt 400mAH Li-ion polymer battery which offers non-stop power supply of approximately 48 hours (with the auto locating & uploading interval set at every 5 minutes). *Signal strength, Phone call, voice chat or other actions will have an impact on the battery life. 4. Why can't I scan the QR code with my APP? Please adjust the distance between your phone and the watch, or move to a location with sufficient light and try scanning again. Page 19

5. Why does my watch show incorrect date/time and weather info? Your watch obtains date & time information from the mobile network operator and synchronizes the weather forecast from your local internet server. If the information is incorrect please make sure that the watch is registered to a mobile network and connected to the internet via GPRS data. 6. Can anyone call my watch? Only the phone numbers which are on the contact list can call your watch and only the first phone number on the contact list can receive a call alert text. This is to ensure you won't receive calls & messages from unwanted persons. 7. Can I call anyone I want from the watch? You can call a maximum of 16 people from your contact list. You can call someone from the list by selecting the person from the Menu > Contact. It is easy and safe because no one can see the contact's phone number on the watch. 8. Can anyone text my watch? Only 6 subscribers can send you text message via APP. 9. About the location accuracy. The KOKO Watch uses a combination of GPS, WiFi and cellular to determine location. The location accuracy depending on available signal strength and surrounding conditions. If the watch is not within a clear line of sight to GPS satellites, it will use crowd-sourced WiFi and cell tower locations to determine watch's location. Page 20

All GPS navigation relies on satellite signals received outdoors. The best GPS signal reception can be reached in an open area. Due to the nature of the GPS signal, some factors may influence the performance and accuracy of the GPS location, for example tall buildings, hills, rain, fog and snow, etc. Please note that the maps, directions and locations on KOKO Watch APP depend on data services. These data services are subjected to changes and might not be available in all geographic areas, resulting in maps, directions, or location-based information that might be unavailable, inaccurate or incomplete. Please note that GPS/WiFi/LBS positioning technology gives a good indication of where the watch is, but should not be solely relied upon. 10. Environmentally Friendly Disposal. Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances should bring them to these or to similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and the save treatment of toxic substances. Page 21

DECLARATION OF CONFORMITY The GPS tracker phone watch model CT20 complies the requirements of the EU-directive 1999/5/EC (on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity). The radio equipment of the GPS tracker phone watch model CT20 is designed to be used in all countries of the European Union, EFTA states, Switzerland and Turkey. The conformity with the mentioned EU-directive is certified with the CE 1313 sign on the product. A detailed CE-declaration of conformity document is available on www.koko-mobile.com Page 22