ESD WORK TABLE WITH DIGITAL REWORK STATION (SMD Rework / PTH Rework) Package - 1 TIP Activator SMD Components Soldering PTH Desoldering QFP / PLCC / SOIC SOP Desoldering Fume Absorber
DIGITAL REWORK STATION SMD / PTH Rework Station TECHNICAL FEATURES Soldering and De Soldering Station Input Voltage 190 v to 270v Out put Voltage 24v AC Soldering Wattage 60 Watts De Soldering Wattage 70 Watts Temp range 180-480 c Temp accuracy +/- 1 c Tip to ground potential under 2 M.V Tip to ground Leakage under 2 Vacuum 600 mm/hg High Quality 24V DC Pump with 4000 RPM SMD Hot Air 220 v AC Input Voltage Power Consumption 300 Watts Air Pump Diaphragm type Capacity 24 L/min Hot air temperature 200 to 550 Temp accuracy +/- 1 c SMT Hot Tweezers 2X25w Motor will switch off automatically after reaching 100 c when the element is switched off. * Optional Suitable for the above model 999 MC 3 in one SMT Hot Tweezer * Optional SMD Iron with built in vacuum Pickup Facility for both models For Model 999MC 4 in one Additional Feature SMT TWEEZER Handle 2 X 25 Watts GENERAL FEATURES Auto tune PID Control Circuit. Ease of operation Set / Read of Operation Separate switches for increase & decrease of temperature, after two seconds the actual read of temp will display Intelligent Power Management auto stand by on mains interruption to save power Temperature control accuracy +/-1 C If sensor fails power to the element is shut off Burn Proof silicon cable thermal resistance up to 600 C SYSTEM INCLUDES Soldering Bits 10 Nos De Soldering Nozzles 03 Nos Smt Hot Tweezers Set 02 Nos Smd Hot Air 03 Single Hole Nozzle Fiber Filters (50 Nos A Set) Primary Fiber Filters (10 Nos A Set) Secondary Silicon Washers Set (02 Sets) Glass Tubes - 02 Cleaning Springs - 03 Combined Stand Soldering & DeSoldering SMD Hot Air Stand SMT Hot Tweezer Stand
TIP Activator TIP Activator Solder Wire Roll Desolder Wick ESD Brush Vaccum Pickup Pencil Wrist Strap ESD Apron ESD Slippers Foot Rest for ESD Table SMD KIT ESD Rubber Mat ESD CHAIR Wooden Drawer Flux Pen Fine Precision Tweezer Set Glouses 5X
ESD Work Table ESD Laminated instrument storage shelf Tube Light fitting Drawing Borad Electrical Panel a. 6 Nos. Multipurpose 3 pin sockets b. Switch Tube Light c. Indicator Static dissipative table top size : 5 x 2½ Remote Jack (For Wrist Strap) Foot Rest Conductive Floor Mat 1.5 M x 1M Detachable drawer Dismantling type Aluminium section (40mm sq) Wrist strap with coil cord Antistatic Gloves Antistatic bins Bin holder Antistatic Operator Chair Qty : Specifications: Height adjustable 1 Pair 9 Nos. Revolving Colour : Black With Antistatic Cushioned Seat & Back. A additional attachment of a brass chain clamped on the bottom of the chair for additional grounding purpose is also provided. Pneumatically Operated One conductive Castor Wheel remaining normal wheels. Meets the ANSI ESD S20.2007 and EIA 625 Standards. Antistatic Chair : Surface Resistivity of seat & back to the Ground 106 10 Ohms / Sq. Meets the ANSI ESD S20.2007 and EIA 625 Standards.
Pluto 999MC Digital Rework Station (Soldering Iron, Desoldering, SMD Hot Air, SMT Hot Tweezer)] Package - 1 Includes ESD Work Table Rework Station (Soldering Iron, Desoldering, SMD Hot Air, SMT Hot Tweezer) SMD Single Hole Nozzles TIP Activator SMD KIT Flux Pen Solder Wire Roll Desolder Wick ESD Rubber Mat ESD Brush Vaccum Pickup Pencil Fine Precision Tweezer Set Wrist Strap ESD Apron ESD Chair Glouses ESD Slippers Foot Rest for ESD Table Wooden Drawer 5X Antistatic Wrist Strap 1 Set (3Nos.) Phone : 9618231000, 9866682310 Fax : 040-27159726 Email : krr_soldering@rediffmail.com, krr_soldering@hotmail.com Web : www.plutostations.com