F5 Platforms: Accessories MAN-0557-06
Table of Contents Table of Contents Transceiver Modules...5 Copper SFP modules...5 SKU: F5-UPG-SFPC-R (OPT-0015-00)...5 Fiber XFP modules...6 SKU: F5-UPG-XFP-R (no longer available)...6 SKU: F5-UPG-XFPEROP-R (no longer available)...7 SKU: F5-UPG-XFPLROP-R (no longer available)...7 Fiber SFP modules...8 SKU: F5-UPG-SFP-R (OPT-0010-xx)...8 SKU: F5-UPG-SFPLX-R (OPT-0050-xx/OPT-0011-xx)...9 Fiber SFP+ modules...10 SKU: F5-UPG-SFP+-R (OPT-0016-xx)...10 SKU: F5-UPG-SFP+LR-R (OPT-0017-xx)...11 Fiber QSFP+ modules...12 SKU: F5-UPG-QSFP+SR4 (OPT-0036-xx)...12 SKU: F5-UPG-QSFP+ (OPT-0025-xx)...13 SKU: F5-UPG-QSFP+LR4 (OPT-0030-xx)...14 Fiber QSFP28 modules...14 SKU: F5-UPG-QSFP28-SR4 (OPT-0031-xx)...15 SKU: F5-UPG-QSFP28-LR4 (OPT-0039-xx)...15 Transceiver Module Updates...16 Download the f5optics package...16 Install transceiver module updates using the f5optics package...17 About using the f5optics package with VIPRION B4450 blades...17 Networking Cables...19 Direct attach cables...19 SKU: F5-UPG-SFPC+-3M-8 (CBL-0138-xx)...19 QSFP+ breakout cables...20 SKU: F5-UPG-QSFP+-1M-2 (CBL-0159-xx)...20 SKU: F5-UPG-QSFP+-3M-2+ (CBL-0160-xx)...21 SKU: F5-UPG-QSFP+-10M-2 (CBL-0170-xx)...21 Active optical cables (AOCs)...22 SKU: F5-UPG-QSFP+AOC1M50 (OPT-0029-x01)...22 SKU: F5-UPG-QSFP+AOC3M (OPT-0029-03)...23 SKU: F5-UPG-QSFP+AOC10M (OPT-0029-10)...23 High Availability (HA) Cables...25 Failover Cables...25 3
Table of Contents SKU: F5-UPG-CBL-6FT-RS (CBL-0151-xx)...25 SKU: F5-UPG-CBL-10FT-RJ (CBL-0154-xx)...25 Cable and Adapter Pinouts...27 Cable and adapter pinouts...27 9-pin DE-9 console cable...27 RJ45/DE-9 console cable...27 9-pin DE-9 failover cable...28 RJ45 failover cable...28 RJ45M/RJ45F rolled adapter...28 Legal Notices...31 Legal Notices...31 4
Transceiver Modules Copper SFP modules These copper GbE SFP transceiver modules are supported in F5 products. Important: 1000BASE-T network segments have a maximum length of 328 feet (100 meters) and must use Category 5 cable minimum. F5 recommends Category 5e or Category 6. Important: F5 only provides support for F5-branded or F5-provided optical modules. Note: All photos shown are examples. The appearance of your components or accessories might vary slightly. SKU: F5-UPG-SFPC-R (OPT-0015-00) These are specifications for the 1000BASE-T Copper Ethernet transceiver module. Module 1000BASE-T Copper Ethernet transceiver module RJ45 Maximum operating distance 328 feet (100 meters) Cable specifications Minimum Category 5 (Cat5) with Category 5 UTP; Cat5e or Cat6 recommended Standards compliance IEEE 802.3ab (1000BASE-T) DDM No
Transceiver Modules 2000, 4000, 5000, 7000, 10000, 12000, i2000, i4000, i5000, i7000, i10000 Fiber XFP modules These fiber GbE XFP transceiver modules are supported in F5 products. Important: F5 only provides support for F5-branded or F5-provided optical modules. Note: All photos shown are examples. The appearance of your components or accessories might vary slightly. SKU: F5-UPG-XFP-R (no longer available) These are specifications for the 10GBASE-SR (Short Range) Ethernet transceiver module. Important: You must ensure suitability of both the optical fiber and the laser transceiver on the other end. Module 10GBASE-SR (Short Range) Ethernet transceiver module Laser emitter 850 nm (multi-mode) Duplex LC Operating distance/cable specifications 26 meters maximum for type 160MHz-km 62.5μm MMF 33 meters maximum for type OM1 200MHz-km 62.5μm MMF 66 meters maximum for type 400MHz-km 50.0 μm MMF 82 meters maximum for type OM2 500MHz-km 50.0μm MMF 300 meters maximum for type OM3 2000MHz-km 50.0μm MMF Standards compliance IEEE 802.3ae (10 Gigabit Ethernet) DDM No VIPRION (B4100 blade) 6
F5 Platforms: Accessories SKU: F5-UPG-XFPEROP-R (no longer available) These are specifications for the 10GBASE-ER (Extended Range) Ethernet transceiver module. Important: You must ensure suitability of both the optical fiber and the laser transceiver on the other end. Module 10GBASE-ER (Extended Range) Ethernet transceiver modules Laser emitter 1550 nm (single-mode) Duplex LC Operating distance/cable specifications 40 kilometers maximum on SMF (ITU-T G.652) Standards compliance IEEE 802.3ae DDM No VIPRION (B4100 blade) SKU: F5-UPG-XFPLROP-R (no longer available) These are specifications for the 10GBASE-LR (Long Range) Ethernet transceiver module. Important: You must ensure suitability of both the optical fiber and the laser transceiver on the other end. Module 10GBASE-LR (Long Range) Ethernet transceiver modules Laser emitter 1310 nm (single-mode) Duplex LC Operating distance/cable specifications 10 kilometers maximum on SMF (ITU-T G.652) Standards compliance IEEE 802.3ae DDM No 7
Transceiver Modules VIPRION (B4100 blade) Fiber SFP modules These fiber GbE SFP (or Mini-GBIC) transceiver modules are supported in F5 products. Important: F5 only provides support for F5-branded or F5-provided optical modules. Note: All photos shown are examples. The appearance of your components or accessories might vary slightly. SKU: F5-UPG-SFP-R (OPT-0010-xx) These are specifications for the 1000BASE-SX (Short Range) Ethernet transceiver module. Important: You must ensure suitability of both the optical fiber and the laser transceiver on the other end. Module 1000BASE-SX (Short Range) Ethernet transceiver module Laser emitter 850 nm (multi-mode) Duplex LC Operating distance/cable specifications 275 meters maximum of 62.5μm MMF that meets type A1a defined in IEC 60793-2:1992 550 meters maximum of 50.0μm MMF that meets type A1b defined in IEC 60793-2:1992 Standards compliance IEEE 802.3z (1000BASE-SX) DDM No 8
F5 Platforms: Accessories 1600, 2000, 3600, 3900, 4000, 5000, 6900, 7000, 8900, 8950, 10000, 11000, 11050, 12000, i2000, i4000, i5000, i7000, i10000, VIPRION (B2100, B2150, B4100, B4200, and B4300 blades) SKU: F5-UPG-SFPLX-R (OPT-0050-xx/OPT-0011-xx) These are specifications for the 1000BASE-LX (Long Range) Ethernet transceiver module. Important: You must ensure suitability of both the optical fiber and the laser transceiver on the other end. Module 1000BASE-LX (Long Range) Ethernet transceiver module Laser emitter 1310 nm (single-mode) Duplex LC Operating distance/cable specifications Up to 10 kilometers maximum on 9/125μm SMF using 10μm SMF that meets type B1 in IEC 60793-2:1992 550 meters maximum using 50μm MMF that meets type A1b defined in IEC 60793-2:1992 550 meters maximum using 62.5μm MMF that meets type A1a defined in IEC 60793-2:1992 Note: When using MMF, single-mode, fiber offset-launch mode-conditioning patch cords are required in both ends of the link, as specified in IEEE 802.3-2005 section 38.11.4. 9
Transceiver Modules Standards compliance IEEE 802.3z (1000BASE-LX) DDM No 1600, 2000, 3600, 3900, 4000, 5000, 6900, 7000, 8900, 8950, 10000, 11000, 11050, 12000, i2000, i4000, i5000, i7000, i10000, VIPRION (B2100, B2150, B4100, B4200, and B4300 blades) Fiber SFP+ modules These fiber 10GbE SFP+ transceiver modules are supported in F5 products. Important: F5 only provides support for F5-branded or F5-provided optical modules. Note: All photos shown are examples. The appearance of your components or accessories might vary slightly. SKU: F5-UPG-SFP+-R (OPT-0016-xx) These are specifications for the 10GBASE-SR (Short Range) Ethernet transceiver module. Important: You must ensure suitability of both the optical fiber and the laser transceiver on the other end. Module 10GBASE-SR (Short Range) 10G Ethernet Transceiver Module Laser emitter 850 nm (multi-mode) Duplex LC 10
F5 Platforms: Accessories Operating distance/cable specifications 26 meters maximum for type 160MHz-km 62.5μm MMF 33 meters maximum for type OM1 200MHz-km 62.5μm MMF 66 meters maximum for type 400MHz-km 50.0 μm MMF 82 meters maximum for type OM2 500MHz-km 50.0μm MMF 300 meters maximum for type OM3 2000MHz-km 50.0μm MMF Standards compliance IEEE 802.3ae (10GBASE-LR/LW, 10GBASE-SR 10G) DDM No 2000, 4000, 5000, 7000, 8900, 8950, 10000, 11000, 11050, 12000, i2000, i4000, i5000, i7000, i10000, VIPRION (B2100, B2150, B4100, B4200, and B4300 blades) SKU: F5-UPG-SFP+LR-R (OPT-0017-xx) These are specifications for the 10GBASE-LR (Long Range) 10G Ethernet transceiver module. Important: You must ensure suitability of both the optical fiber and the laser transceiver on the other end. Module 10GBASE-LR (Long Range) 10G Ethernet transceiver module Laser emitter 1310 nm (single-mode) Duplex LC Operating distance/cable specifications 10 kilometers maximum on 8-10μm SMF (ITU-T G.652) 11
Transceiver Modules Standards compliance IEEE 802.3ae (10GBASE-LR) DDM No 2000, 4000, 5000, 7000, 8900, 8950, 10000, 11000, 11050, 12000, i2000, i4000, i5000, i7000, i10000, VIPRION (B2100, B2150, B4100, B4200, and B4300 blades) Fiber QSFP+ modules These fiber 40GbE QSFP+ transceiver modules are supported in F5 products. Important: F5 only provides support for F5-branded or F5-provided optical modules. Note: All photos shown are examples. The appearance of your components or accessories might vary slightly. SKU: F5-UPG-QSFP+SR4 (OPT-0036-xx) These are specifications for the 40GBASE-SR4 100m QSFP+ Optical transceiver module. Important: You must ensure suitability of both the optical fiber and the laser transceiver on the other end. Module 40GBASE-SR4 100m QSFP+ optical transceiver module Laser emitter 850 nm (multi-mode) MPO/MTP Operating distance/cable specifications 100 meters on OM3 MMF 150 meters on OM4 MMF 12
F5 Platforms: Accessories Standards compliance IEEE 802.3ba (40GBASE-SR4) DDM Yes 10000, 12000, i5000, i7000, i10000, VIPRION (B2250, B4300, and B4450 blades) SKU: F5-UPG-QSFP+ (OPT-0025-xx) These are specifications for the 40GBASE-SR4 100m QSFP+ optical transceiver module. Important: You must ensure suitability of both the optical fiber and the laser transceiver on the other end. Module 40GBASE-SR4 100m QSFP+ optical transceiver module Laser emitter 850 nm (multi-mode) MPO/MTP Operating distance/cable specifications 100 meters on OM3 MMF 150 meters on OM4 MMF Standards compliance IEEE 802.3ba (40GBASE-SR4) DDM No 10000, 12000, i5000, i7000, i10000, VIPRION (B2250, B4300, and B4450 blades) 13
Transceiver Modules SKU: F5-UPG-QSFP+LR4 (OPT-0030-xx) These are specifications for the 40GBASE-LR4 10km QSFP+ optical transceiver module. Important: You must ensure suitability of both the optical fiber and the laser transceiver on the other end. Module 40GBASE-LR4 10km QSFP+ optical transceiver module Laser emitter 1271-1331 nm (single mode) Duplex LC Operating distance/cable specifications 10 kilometers maximum on SMF (ITU-T G.652) Standards compliance IEEE 802.3ba (40GBASE-LR4) DDM Yes 10000, 12000, i5000, i7000, i10000, VIPRION (B2250, B4300, and B4450 blades) Fiber QSFP28 modules These fiber 100GbE QSFP28 transceiver modules are supported in F5 products. 14
F5 Platforms: Accessories Important: F5 only provides support for F5-branded or F5-provided optical modules. Note: All photos shown are examples. The appearance of your components or accessories might vary slightly. SKU: F5-UPG-QSFP28-SR4 (OPT-0031-xx) These are specifications for the 100GBASE-SR4 100m QSFP28 optical transceiver module. Important: You must ensure suitability of both the optical fiber and the laser transceiver on the other end. Module 100GBASE-SR4 100m QSFP28 optical transceiver module Laser emitter 850 nm (multi-mode) MPO/MTP Operating distance/cable specifications 70 meters on OM3 MMF 100 meters on OM4 MMF Standards compliance IEEE 802.3bm (100GBASE-SR4) DDM Yes VIPRION (B4450 blades) SKU: F5-UPG-QSFP28-LR4 (OPT-0039-xx) These are specifications for the 100GBASE-LR4 100m QSFP28 optical transceiver module. Important: You must ensure suitability of both the optical fiber and the laser transceiver on the other end. 15
Transceiver Modules Module 100GBASE-LR4 100m QSFP28 10km optical transceiver module Laser emitter 1295-1310 nm (single mode) Duplex LC Operating distance/cable specifications 10 kilometers maximum on SMF (ITU-T G.652) Standards compliance IEEE 802.3ba (100GBASE-LR4) DDM Yes VIPRION B4450 blades Transceiver Module Updates F5 provides a package (f5optics) that you can download and install to your system to get the latest updates for F5-branded transceiver modules. Note: This feature is available only on these systems running BIG-IP version 12.1.1 HF2 or later: iseries platforms and VIPRION 4450 blade. Download the f5optics package You can download the f5optics package from F5 to install updates to F5-branded transceiver modules. 1. Log in to downloads.f5.com and click Find a Download. 2. In the Hardware-Specific area, click Platform / EUD. 3. Select f5optics from the list. 4. Click the file name f5optics-<version-and-build-number>.im to start the download. 5. Download the corresponding checksum file and README file. 16
F5 Platforms: Accessories The corresponding checksum file has the same name as the IM file, except that.md5 is the file extension. After the download completes, verify the integrity of the file by checking the MD5 checksum. Install transceiver module updates using the f5optics package You can use tmsh to install updates to F5-branded transceiver modules using the f5optics package. Important: When you run the f5optics installation process, this disrupts traffic on the system on which the installation is performed. During the installation process, you are prompted to confirm that you are aware of this action before the installation can proceed. 1. Connect to the system using the serial console or by opening an SSH session to the management IP address. 2. Use SCP to move the f5optics package to the /shared/f5optics/images directory on your F5 system. 3. Open the TMOS Shell (tmsh). tmsh 4. Change to the network module. net The system prompt updates with the module name: user@bigip01(active)(/common)(tmos.net)# 5. Install the f5optics package. install f5optics [ recovery ] [ slot [ <slot_number> all ] ] The slot option applies only to chassis-based systems. The recovery option enables you to recover from a corrupted f5optics installation by installing the latest version of the f5optics package that is currently available on the system. 6. When you are prompted to confirm the installation, type y. Are you sure? Y/N (Installing the f5optics will re-initialize network interfaces, causing a temporary traffic interruption) y About using the f5optics package with VIPRION B4450 blades When you add a VIPRION 4450 blade to an existing cluster, the new blade must be running a version of the f5optics package that is at least as recent as the version of the package that is running on the primary blade. Verify the f5optics version on a VIPRION blade You can use tmsh to verify the version of the f5optics package on your VIPRION blade and update it to a newer version, if needed. 1. Log in to the command line of the primary blade using an account with root access. 2. Verify the f5optics package version. tmsh show net f5optics 17
Transceiver Modules This is an example of the output that you might see when you run this command: === slot 2 addr 123.4.5.6 color green === Name : f5optics Relocations: (not relocatable) Version : 1.0.0 Vendor: (none) Release : 39.0 Build Date: Wed 30 Nov 2016 02:58:31 PM PST Group : System Environment/Libraries Source RPM: f5optics-1.0.0-39.0.src.rpm Summary : F5 optics configuration Description : f5 Optics Configuration If the version of f5optics on your blade is not the latest available from F5, you need to download and install the latest version of the f5optics package. 18
Networking Cables Direct attach cables For platforms that support 10 GbE ports, F5 provides a copper direct attach cable for connecting the SFP+ ports on your F5 platform to the SFP+ modules on an upstream switch. Figure 1: Example of a direct attach cable Note: All photos shown are examples. The appearance of your components or accessories might vary slightly. These direct attach cables are supported for use with F5 products. SKU: F5-UPG-SFPC+-3M-8 (CBL-0138-xx) These are specifications for the 10GbE direct attach copper cable. Cable Copper SFP+ 10GbE Active Direct Attach (8 pack) Length 3 meters SFP+ to SFP+
Networking Cables 2000, 4000, 5000, 7000, 8900, 8950, 10000, 11000, 11050, 12000, i2000 (see note), i4000 (see note), i5000, i7000, i10000, VIPRION (B2100, B2150, B4100, B4150, B4200, and B4300 blades) Note: The i2000 and i4000 Series platforms are supported only in BIG-IP version 12.1.2 HF1 or 13.0.0 HF1. QSFP+ breakout cables For platforms that support 40GbE ports, F5 provides QSFP+ breakout cable options to convert a single 40GbE port to four 10GbE ports. The QSFP+ breakout cable has a female MPO/MTP connector on one end for connecting to a QSFP+ transceiver module on your F5 platform and four LC duplex connectors on the other end for connecting to the SFP+ transceiver modules on an upstream switch. These cables do not have any active components/transceivers on either end. Figure 2: Example of a QSFP+ breakout cable Note: All photos shown are examples. The appearance of your components or accessories might vary slightly. These QSFP+ breakout cables are supported for use with F5 40GbE products. SKU: F5-UPG-QSFP+-1M-2 (CBL-0159-xx) These are specifications for the 1 meter QSFP+ breakout cable. Cable Quad Small Form-factor Pluggable Plus (QSFP+) Optical Breakout Cable Assembly 20
F5 Platforms: Accessories Length 1 meters MTP to four duplex LC Fiber type OM3 10000, 12000, i5000, i7000, i10000, VIPRION (B2250, B4300, and B4450 blades) SKU: F5-UPG-QSFP+-3M-2+ (CBL-0160-xx) These are specifications for the 3 meter QSFP+ breakout cable. Cable Quad Small Form-factor Pluggable Plus (QSFP+) Optical Breakout Cable Assembly Length 3 meters MTP to four duplex LC Fiber type OM3 10000, 12000, i5000, i7000, i10000, VIPRION (B2250, B4300, and B4450 blades) SKU: F5-UPG-QSFP+-10M-2 (CBL-0170-xx) These are specifications for the 10 meter QSFP+ breakout cable. Cable Quad Small Form-factor Pluggable Plus (QSFP+) Optical Breakout Cable Assembly Length 10 meters MTP to four duplex LC Fiber type OM3 10000, 12000, i5000, i7000, i10000, VIPRION (B2250, B4300, and B4450 blades) 21
Networking Cables Active optical cables (AOCs) For platforms that support 40GbE ports, F5 provides active optical cable (AOC) options for connecting to QSFP+ ports on your F5 platform. AOCs already have the optical electronics connected, eliminating the connectors between the cable and the transceiver module. AOCs plug into standard optical module sockets and are less expensive than other optical solutions, because the manufacturer matches the electronics to the required length and type of cable. Furthermore, standards do not need to be met at every stage of the connection, so AOCs are more efficient. Figure 3: Example of an active optical cable (AOC) Note: All photos shown are examples. The appearance of your components or accessories might vary slightly. These active optical cables (AOCs) are supported for use with F5 40GbE products. SKU: F5-UPG-QSFP+AOC1M50 (OPT-0029-x01) These are specifications for the 1.5 meter 40GbE QSFP+ to 4LC duplex active optical cable (AOC). Important: You must ensure suitability of both the optical fiber and the laser transceiver on the other end. Cable QSFP+ active optical cable (AOC) assembly Length 1.5 meters QSFP+ to four duplex LC breakout 22
F5 Platforms: Accessories Fiber type OM3 Standards compliance IEEE 802.3ba (10GBASE-SR) DDM No 10000, 12000, i5000, i7000, i10000, VIPRION (B2250, B4300, and B4450 blades) SKU: F5-UPG-QSFP+AOC3M (OPT-0029-03) These are specifications for the 3 meter 40GbE QSFP+ to 4LC duplex active optical cable. Important: You must ensure suitability of both the optical fiber and the laser transceiver on the other end. Cable QSFP+ active optical cable (AOC) assembly Length 3 meters QSFP+ to LC Fiber type OM2 Standards compliance IEEE 802.3ba (40GBASE-SR4) DDM No 10000, 12000, i5000, i7000, i10000, VIPRION (B2250, B4300, and B4450 blades) SKU: F5-UPG-QSFP+AOC10M (OPT-0029-10) These are specifications for the 10 meter 40GbE QSFP+ to 4LC duplex active optical cable. Important: You must ensure suitability of both the optical fiber and the laser transceiver on the other end. Cable QSFP+ active optical cable (AOC) assembly 23
Networking Cables Length 10 meters QSFP+ to LC Fiber type OM2 Standards compliance IEEE 802.3ba (40GBASE-SR4) DDM No 10000, 12000, i5000, i7000, i10000, VIPRION (B2250, B4300, and B4450 blades) 24
High Availability (HA) Cables Failover Cables These failover cables are supported in F5 products. Note: All photos shown are examples. The appearance of your components or accessories might vary slightly. SKU: F5-UPG-CBL-6FT-RS (CBL-0151-xx) These are specifications for the 6 feet RJ45 failover cable. Cable Failover cable Length 6 feet Male RJ45 to Male RJ45 Cable type CAT5 crossover 2000, 4000, 5000, 7000, 10000, 12000, i2000, i4000, i5000, i7000, i10000 SKU: F5-UPG-CBL-10FT-RJ (CBL-0154-xx) These are specifications for the 10 feet RJ45 failover cable. Cable Failover cable Length 10 feet Male RJ45 to Male RJ45 Cable type CAT5 crossover
High Availability (HA) Cables 2000, 4000, 5000, 7000, 10000, 12000, i2000, i4000, i5000, i7000, i10000 26
Cable and Adapter Pinouts Cable and adapter pinouts These pinouts describe how specified connectors are wired. Pinouts are helpful when building and testing connectors, cables, and adapters. 9-pin DE-9 console cable This table lists the pinouts for a 9-pin DE-9 console cable that connects to the 9-pin serial port on your platform. Note: These platforms have a 9-pin serial port: BIG-IP 1600/3600/3900/6900/8900/8950/11000/11050. DE-9F pin DE-9F signal DE-9F pin DE-9F signal 1, 6 DCD, DSR 4 DTR 2 RD 3 TD 3 TD 2 RD 4 DTR 6, 1 DSR, DCD 5 SGND 5 SGND 7 RTS 8 CTS 8 CTS 7 RTS 9 RI 9 RI RJ45/DE-9 console cable This table lists the pinouts for a RJ45/DE-9 console cable that connects to the RJ45 console port on your platform. Note: These platforms have an RJ45 console port: BIG-IP 2000/4000/5000/7000/10000 Series, BIG-IP iseries, and VIPRION B2100/B2150/B2250/B4300/B4400 Series blades. RJ45 pin 1 2 3 4 5 6 Signal RTS DTR TX GND GND RX DE-9 pin 8 6 2 5 5 3
Cable and Adapter Pinouts RJ45 pin 7 8 Signal DSR CTS DE-9 pin 4 7 9-pin DE-9 failover cable This table lists the pinouts for the 9-pin DE-9 failover cable that you can use to connect platforms for failover purposes. Note: These platforms have a 9-pin serial port: BIG-IP 1600/3600/3900/6900/8900/8950/11000/11050 and VIPRION B4100/B4200 Series blades. DE-9F pin DE-9F signal DE-9F pin DE-9F signal 4 DTR 6 DSR 5 SG 5 SG 6 DSR 4 DTR 7 RTS 8 CTS 8 CTS 7 RTS RJ45 failover cable This table lists the pinouts for the RJ45 failover cable that you can use to connect platforms for failover purposes. Note: These platforms have an RJ45 port: BIG-IP 2000/4000/5000/7000/10000/12000 and iseries. RJ45 pin RJ45 signal RJ45 pin RJ45 signal 1 RTS 3 CTS 2 DTR 6 DSR 3 CTS 1 RTS 6 DSR 2 DTR 5 GND 5 GND 4 GND 4 GND 7 TXD 8 RXD 8 RXD 7 TXD RJ45M/RJ45F rolled adapter This table lists the pinouts for the RJ45M/RJ45F rolled adapter that connects to the RJ45 console port on your platform. 28
F5 Platforms: Accessories Note: These platforms have an RJ45 console port: BIG-IP 2000/4000/5000/7000/10000 Series, iseries, and VIPRION B2100/B2150/B2250/B4300/B4400 Series blades. RJ45M pin 1 2 3 4 5 6 7 8 RJ45F pin 8 7 6 5 4 3 2 1 29
Legal Notices Legal Notices Publication Date This document was published on September 20, 2017. Publication Number MAN-0557-06 Copyright Copyright 2017, F5 Networks, Inc. All rights reserved. F5 Networks, Inc. (F5) believes the information it furnishes to be accurate and reliable. However, F5 assumes no responsibility for the use of this information, nor any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent, copyright, or other intellectual property right of F5 except as specifically described by applicable user licenses. F5 reserves the right to change specifications at any time without notice. Trademarks For a current list of F5 trademarks and service marks, see http://www.f5.com/about/guidelines-policies/trademarks/. All other product and company names herein may be trademarks of their respective owners. Patents This product may be protected by one or more patents indicated at: https://f5.com/about-us/policies/patents Export Regulation Notice This product may include cryptographic software. Under the Export Administration Act, the United States government may consider it a criminal offense to export this product from the United States. RF Interference Warning This is a Class A product. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures. FCC Compliance This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This unit generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user, at his own expense, will be required to take whatever measures may be required to correct the interference.
Legal Notices Any modifications to this device, unless expressly approved by the manufacturer, can void the user's authority to operate this equipment under part 15 of the FCC rules. Canadian Regulatory Compliance This Class A digital apparatus complies with Canadian ICES-003. Standards Compliance This product conforms to the IEC, European Union, ANSI/UL and Canadian CSA standards applicable to Information Technology products at the time of manufacture. VCCI Class A Compliance This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take corrective actions. VCCI-A 32
Index Index 9-pin DE-9 console cable pinout 27 9-pin DE-9 failover cable pinout 28 A active optical cable (AOC) about 22 specifications 22 active optical cables 1.5 meter QSFP+ AOC 22 10 meter QSFP+ AOC 23 3 meter QSFP+ AOC 23 F5-UPG-QSFP+AOC10M 23 F5-UPG-QSFP+AOC1M50 22 F5-UPG-QSFP+AOC3M 23 C CBL-0138-01, See F5-UPG-SFPC+-3M-8. CBL-0151-01, See F5-UPG-CBL-6FT-RS. CBL-0154-01, See F5-UPG-CBL-10FT-RJ. CBL-0159-00, See F5-UPG-QSFP+-1M-2. CBL-0160-00, See F5-UPG-QSFP+-3M-2+. CBL-0170-00, See F5-UPG-QSFP+-10M-2. D direct attach cables specifications 19 direct attach cable specifications 10G direct attach copper 19 F f5optics package about 16 downloading 16 installing using tmsh 17 supported BIG-IP software versions 16 supported platforms 16 using with VIPRION B4450 blades 17 verifying the package version on a VIPRION blade 17 F5-UPG-CBL-10FT-RJ. 25 F5-UPG-CBL-6FT-RS. 25 F5-UPG-QSFP+ 12 13 F5-UPG-QSFP+AOC10M 23 F5-UPG-QSFP+AOC1M50 22 F5-UPG-QSFP+AOC3M 23 F5-UPG-QSFP+LR4 14 F5-UPG-QSFP28-SR4 15 F5-UPG-SFP+LR-R 11 F5-UPG-SFP+-R 10 F5-UPG-SFPC-R 5 6 F5-UPG-SFPLX-R 9 F5-UPG-SFP-R 8 F5-UPG-XFPEROP-R 7 F5-UPG-XFPLROP-R 7 failover cables F5-UPG-CBL-10FT-RJ 25 F5-UPG-CBL-6FT-RS 25 RJ45 (10 feet) 25 RJ45 (6 feet) 25 failover cable specifications SFP ports 25 N networking cables 10GbE direct attach copper cable 19 10 meter QSFP+ breakout cable 21 1 meter QSFP+ breakout cable 20 3 meter QSFP+ breakout cable 21 F5-UPG-QSFP+-10M-2 21 F5-UPG-QSFP+-1M-2 20 F5-UPG-QSFP+-3M-2+ 21 F5-UPG-SFPC+-3M-8 19 networking cable specifications QSFP+ breakout cables 20 O OPT-0010-00, See F5-UPG-SFP-R. OPT-0011-00, See F5-UPG-SFPLX-R. OPT-0012-00, See F5-UPG-XFP-R. OPT-0013-00, See F5-UPG-XFPLROP-R. OPT-0014-00, See F5-UPG-XFPEROP-R. OPT-0015-00, See F5-UPG-SFPC-R. OPT-0016-00, See F5-UPG-SFP+-R. OPT-0017-00, See F5-UPG-SFP+LR-R. OPT-0025-00, See F5-UPG-QSFP+. OPT-0029-01, See F5-UPG-QSFP+AOC1M50. OPT-0029-03, See F5-UPG-QSFP+AOC3M. OPT-0029-10, See F5-UPG-QSFP+AOC10M. OPT-0030-01, See F5-UPG-QSFP+LR4. OPT-0031-01, See F5-UPG-QSFP28-SR4. OPT-0036-01, See F5-UPG-QSFP+. OPT-0039-01, See SHP-0205-00. P pinouts 9-pin DE-9 console cable 27 9-pin DE-9 failover cable 28 adapters 27 cables 27 RJ45 console port 27 RJ45 failover cable 28 RJ45M/RJ45F rolled adapter 28 33
Index Q QSFP+ breakout cables specifications 20 QSFP+ modules F5-UPG-QSFP+ 12 13 F5-UPG-QSFP+LR4 14 specifications 12 QSFP28 modules F5-UPG-QSFP28-SR4 15 SHP-0205-00 15 specifications 14 R RJ45/DE-9 console port pinout 27 RJ45 failover cable pinout 28 RJ45M/RJ45F rolled adapter pinout 28 S SFP+ modules F5-UPG-SFP+LR-R 11 F5-UPG-SFP+-R 10 specifications 10 SFP modules F5-UPG-SFPC-R 5 F5-UPG-SFPLX-R 9 F5-UPG-SFP-R 8 specifications (copper) 5 specifications (fiber) 8 SHP-0205-00 15 specifications active optical cables 22 direct attach cables 19 failover cables 25 QSFP+ breakout cables 20 QSFP+ modules 12 QSFP28 modules 14 SFP+ modules 10 specifications (continued) SFP modules (copper) 5 SFP modules (fiber) 8 XFP modules 6 T transceiver modules about updating 16 downloading the f5optics package 16 installing updates using tmsh 17 transceiver module specifications F5-UPG-QSFP+ 13 F5-UPG-QSFP+LR4 14 F5-UPG-QSFP+SR4 12 F5-UPG-QSFP28-SR4 15 F5-UPG-SFP+LR-R 11 F5-UPG-SFP+-R 10 F5-UPG-SFPC-R 5 F5-UPG-SFPLX-R 9 F5-UPG-SFP-R 8 F5-UPG-XFPEROP-R 7 F5-UPG-XFPLROP-R 7 F5-UPG-XFP-R 6 QSFP+ modules 12 QSFP28 modules 14 SFP+ modules 10 SFP modules 5, 8 SHP-0205-00 15 XFP modules 6 U UPG-SFPC+-3M-8, See F5-UPG-SFPC+-3M-8. X XFP modules F5-UPG-XFPEROP-R 7 F5-UPG-XFPLROP-R 7 F5-UPG-XFP-R 6 specifications 6 34